Iterative condition monitoring and fault diagnosis scheme of electric motor for harsh industrial application

IEEE Transactions on Industrial Electronics

Volumn 62, Issue 3, 2015, Pages 1760-1769

  Choi, Seungdeog ^a   Pazouki, Elham ^a   Baek, Jeihoon ^b   Bahrami, Hamid Reza ^a  

^a University of Akron   (United States)

^b Korea Railroad Research Institute   (South Korea)

Author keywords

broken rotor bar; condition monitoring; eccentricity; fault diagnosis; Induction motors; maintenance; motor drive; motor protection; reliability and signal processing

Indexed keywords

CONDITION MONITORING; DIGITAL SIGNAL PROCESSORS; ELECTRIC DRIVES; ELECTRIC FAULT CURRENTS; ELECTRIC MOTORS; FAILURE ANALYSIS; INDUCTION MOTORS; ITERATIVE METHODS; MAINTENANCE; SIGNAL DETECTION; SIGNAL PROCESSING; TRACTION MOTORS;

BROKEN ROTOR BAR; DIAGNOSIS TECHNIQUES; ECCENTRICITY; FAULT DIAGNOSIS SCHEMES; MONITORING PERFORMANCE; MOTOR CURRENT SIGNALS; MOTOR DRIVE; MOTOR PROTECTION;

FAULT DETECTION;

EID: 84923166396     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2014.2361112     Document Type: Article

References (32)

1. S. Nandi, H. A. Toliyat, and X. Li, "Condition monitoring and fault diagnosis of electrical machines-A review," IEEE Trans. Energy Convers., vol. 20, no. 4, pp. 719-729, Dec. 2005.
2. M. E. H. Benbouzid, M. Vieira, and C. Theys, "Induction motors' faults detection and localization using stator current advanced signal processing techniques," IEEE Trans. Power Electron., vol. 14, no. 1, pp. 14-22, Jan. 1999.
3. A. Siddique, G. S. Yadava, and B. Singh, "A review of stator fault monitoring techniques of induction motors," IEEE Trans. Energy Convers., vol. 20, no. 1, pp. 106-114, Mar. 2005.
4. A. Soualhi, G. Clerc, and H. Razik, "Detection and diagnosis of faults in induction motor using an improved artificial ant clustering technique," IEEE Trans. Ind. Electron., vol. 60, no. 9, pp. 4053-4062, Sep. 2013.
5. A. G. Espinosa, J. A. Rosero, J. Cusido, L. Romeral, and J. A. Ortega, "Fault detection by means of Hilbert-Huang transform of the stator current in a PMSM with demagnetization," IEEE Trans. Energy Convers., vol. 25, no. 2, pp. 312-318, Jun. 2010.
6. S. Choi, B. Akin, M. M. Rahimian, and H. A. Toliyat, "Performanceoriented electric motors diagnostics in modern energy conversion systems," IEEE Trans. Ind. Electron., vol. 59, no. 2, pp. 1266-1277, Feb. 2012.
7. M. Seera, C. P. Lim, D. Ishak, and H. Singh, "Fault detection and diagnosis of induction motors using motor current signature analysis and a hybrid FMM-CART model," IEEE Trans. Neural Netw., vol. 23, no. 1, pp. 97-108, Jan. 2012.
8. A. Picot et al., "Statistic-based spectral indicator for bearing fault detection in permanent-magnet synchronous machines using the stator current," J. Mech. Syst. Signal Process., vol. 46, no. 2, pp. 424-441, Jun. 2014.
9. B. Trajin, J. Regnier, and J. Faucher, "Comparison between vibration and stator current analysis for the detection of bearing faults in asynchronous drives," IET Elect. Power Appl., vol. 4, no. 2, pp. 90-100, Feb. 2010.
10. B. M. Ebrahimi and J. Faiz, "Feature extraction for short-circuit fault detection in permanent-magnet synchronous motors using stator-current monitoring," IEEE Trans. Power Electron., vol. 25, no. 10, pp. 2673- 2682, Oct. 2010.
11. I. P. Georgakopoulos, E. D. Mitronikas, and A. N. Safacas, "Detection of induction motor faults in inverter drives using inverter input current analysis," IEEE Trans. Ind. Electron., vol. 58, no. 9, pp. 4365-4373, Sep. 2011.
12. W. L. Roux, R. G. Harley, and T. G. Habetler, "Detecting rotor faults in low power permanent magnet synchronous machines," IEEE Trans. Power Electron., vol. 22, no. 1, pp. 322-328, Jan. 2007.
13. J. R. R. Ruiz, J. A. Rosero, A. G. Espinosa, and L. Romeral, "Detection of demagnetization faults in permanent-magnet synchronous motors under nonstationary conditions," IEEE Trans. Magn., vol. 45, no. 7, pp. 2961- 2969, Jul. 2009.
14. X. Huang, T. G. Habetler, and R. G. Harley, "Detection of rotor eccentricity faults in a closed-loop drive-connected induction motor using an artificial neural network," IEEE Trans. Power Electron., vol. 22, no. 4, pp. 1552-1559, Jul. 2007.
15. B. Yazici and G. B. Kliman, "An adaptive statistical time-frequency method for detection of broken bars and bearing faults in motors using stator current," IEEE Trans. Ind. Appl., vol. 35, no. 2, pp. 442-452, Mar./Apr. 1999.
16. S. Rajagopalan, J. A. Restrepo, J. M. Aller, T. G. Habetler, and R. G. Harley, "Wigner-Ville distributions for detection of rotor faults in Brushless DC (BLDC) motors operating under non-stationary conditions," in Proc. IEEE Int. SDEMPED, Sep. 2005, pp. 1-7.
17. S. Rajagopalan, T. G. Habetler, R. G. Harley, J. A. Restrepo, and J. M. Aller, "Non-stationary motor fault detection using recent quadratic time-frequency representations," IEEE Trans. Ind. Appl., vol. 44, no. 3, pp. 735-744, May/Jun. 2008.
18. W. Zhou, B. Lu, T. G. Habetler, and R. G. , "Incipient bearing fault detection via motor stator current noise cancellation using Wiener filter," IEEE Trans. Ind. Appl., vol. 45, no. 4, pp. 1309-1317, Jul./Aug. 2009.
19. A. S. Raj and N. Murali, "Early classification of bearing faults using morphological operators and fuzzy inference," IEEE Trans. Ind. Electron., vol. 60, no. 2, pp. 567-574, Feb. 2013.
20. H. Ocak, K. A. Loparo, and F. M. Discenzo, "Online tracking of bearing wear using wavelet packet decomposition and probabilistic modeling: A method for bearing prognostics," J. Sound Vib., vol. 302, no. 5, pp. 951- 961, May 2007.
21. A. Bellini, A. Yazidi, F. Filippetti, C. Rossi, and G. A. Capolino, "High frequency resolution techniques for rotor fault detection of induction machines," IEEE Trans. Ind. Electron., vol. 55, no. 12, pp. 4200-4209, Dec. 2008.
22. F. Immovilli, C. Bianchini, M. Cocconcelli, A. Bellini, and R. Rubini, "Bearing fault model for induction motor with externally induced vibration," IEEE Trans. Ind. Electron, vol. 60, no. 8, pp. 3408-3418, Aug. 2013.
23. J. Lee, Y. Jeon, D. Choi, and S. Kim, "Demagnetization fault diagnosis method for PMSM of electric vehicle," in Proc. IEEE IECON, Nov. 2013, pp. 2709-2713.
24. Y. Gritli et al., "Advanced diagnosis of electrical faults in wound-rotor induction machines," IEEE Trans. Ind. Electron, vol. 60, no. 9, pp. 4012- 4024, Sep. 2013.
25. Y. Gritli, M. Mengoni, C. Rossi, F. Filippetti, and D. Casadei, "New quantitative rotor fault evaluation in wound rotor induction machine drives under time-varying conditions," in Proc. IEEE Int. SDEMPED, Aug. 2013, pp. 57-63.
26. A. Sarikhani and O. A.Mohammed, "Inter-turn fault detection in PMsynchronous machines by physics-based back electromotive force estimation," IEEE Trans. Ind. Electron, vol. 60, no. 8, pp. 3472-3484, Aug. 2013.
27. M. D. Prieto, G. Cirrincione, A. G. Espinosa, J. A. Ortega, and H. Henao, "Bearing fault detection by a novel condition-monitoring scheme based on statistical-time features and neural networks," IEEE Trans. Ind. Electron, vol. 60, no. 8, pp. 3398-3407, Aug. 2013.
28. S. Choi, B. Akin, M. Rahimian, and H. A. Toliyat, "Fault diagnosis implementation of induction machine based on advanced digital signal processing techniques," IEEE Trans. Ind. Electron, vol. 58, no. 3, pp. 957- 963, Mar. 2011.
29. S. M. Kay, Fundamentals of Statistical Signal Processing: Estimation and Detection Theory. Englewood Cliffs, NJ, USA: Prentice-Hall, 1993.
30. S. Sesia, LTE -The UMTS Long Term Evolution: From Theory to Practice. Hoboken, NJ, USA: Wiley, 2011.
31. M. A. Abu-Rgheff, Introduction to CDMA Wireless Communications. San Diego, CA, USA: Academic, 2007.
32. Y. Li, Orthogonal Frequency Division Multiplexing for Wireless Communication. New York, NY, USA: Springer-Verlag, 2006.