A review of stator fault monitoring techniques of induction motors

IEEE Transactions on Energy Conversion

Volumn 20, Issue 1, 2005, Pages 106-114

  Siddique, Arfat ^a   Yadava, G S ^a   Singh, Bhim ^a  

^a INDIAN INSTITUTE OF TECHNOLOGY DELHI   (India)

Author keywords

Fault monitoring; Induction motors; Maintenance; Stator monitoring

Indexed keywords

COMPUTER SIMULATION; CONDITION MONITORING; ELECTRIC FAULT CURRENTS; MAINTENANCE; MATHEMATICAL MODELS; STATORS;

FAULT MONITORING; STATOR MONITORING;

INDUCTION MOTORS;

EID: 15044343813     PISSN: 08858969     EISSN: None     Source Type: Journal    
DOI: 10.1109/TEC.2004.837304     Document Type: Review

References (183)

1. Motor Reliability Working Group, "Report of large motor reliability survey of industrial and commercial installations Part I, and II," IEEE Trans. Ind. Appl., vol. IA-21, no. 4, pp. 853-872, Jul./Aug. 1985.
2. G. J. Paoletti and A. Rose, "Improving existing motor protection for medium voltage motors," IEEE Trans. Ind. Appl., vol. 25, no. 3, pp. 456-464, May/Jun. 1989.
3. D. J. T. Siyambolapitiya and P. G. Mclaren, "Reliability improvement and economic benefits of on-line monitoring system for large induction machines," IEEE Trans. Ind. Appl., vol. 26, no. 4, pp. 1018-1025, Jul. 1990.
4. G. B. Kliman and J. Stein, "Induction motor fault detection via passive current monitoring- A brief survey," in Proc. 44th Meeting Mechanical Failures Prevention Group, Apr. 1990, pp. 49-65.
5. J. L. Kohler, J. Sottile, and F. C. Trutt, "Alternatives for assessing the electrical integrity of induction motors'," IEEE Trans. Ind. Appl., vol. 28, pp. 1109-1117, Sep./Oct. 1992.
6. W. R. Finley and R. R. Burke, "Troubleshooting motor problems," IEEE Trans. Ind. Appl., vol. 30, no. 5, pp. 1383-1396, Sep./Oct. 1994.
7. O. V. Thorsen and M. Dalva, "A survey of faults on induction motors in offshore oil industry, petrochemical industry, gas terminals, and oil refineries," IEEE Trans. Ind. Appl., vol. 31, no. 5, pp. 1186-1196, Sep./Oct. 1995.
8. R. Belmans and K. Hameyer, "Different approaches to the preventive maintenance of induction motors," in Proc. Int. Conf. Electrical Machines, 1996, pp. 423-428.
9. R. Nuscheler and D. Potoradi, "Problems and failure sources with the parameter identification of asynchronous machines and their dependence on the identification method," in Proc. Int. Conf. Electrical Machines, 1996, pp. 130-135.
10. V. Warren and G. Stone, "Recent developments in diagnostic testing of stator windings," IEEE Electr. Insul. Mag., vol. 14, pp. 16-24, Sep./Oct. 1998.
11. S. Nandi and H. A. Toliyat, "Condition monitoring and fault diagnosis of electrical machines - A review," in Proc. Ind. Applicat. Soc., vol. 1, 1999, pp. 197-204.
12. W. T. Thompson, "A review of on-line condition monitoring techniques for three phase squirrel induction motors - Past, present and future," in Proc. IEEE Int. Symp. Diagnostics Electrical Machines, Power Electronics Drives, 1999, pp. 3-18.
13. A. H. Bonnett and G. C. Soukup, "NEMA motor-generator standards for three-phase induction motors," IEEE Ind. Appl. Mag., vol. 5, no. 5, pp. 49-63, May/Jun. 1999.
14. O. V. Thorsen and M. Dalva, "Failure identification and analysis for high-voltage induction motors in the petrochemical industry," IEEE Trans. Ind. Appl., vol. 35, no. 4, pp. 810-818, Jul./Aug. 1999.
15. S. Moreau, J. C. Trigeassou, G. Champenois, and J. P. Gaubert, "Diagnosis of induction machines: A procedure for electrical fault detection and localization," in Proc. IEEE Int. Symp. Diagnostics Electrical Machines, Power Electronics Drives, 1999, pp. 225-229.
16. M. M. Hodowanec and D. M. Bezesky, "Field motor testing: Limiting risk," IEEE Ind. Appl. Mag., vol. 5, no. 3, pp. 38-48, May /Jun. 1999.
17. M. E. H. Benbouzid, "A review of induction motors signature analysis as a medium for faults detection," IEEE Trans. Ind. Electron., vol. 47, no. 5, pp. 984-993, Oct. 2000.
18. "Improved Motors for Utility Applications, Final Rep.," EPRI EL-4286, 1763-1, vol. 1 & 2, 1982.
19. J. Oliver, "Electric Motor Predictive and Preventive Maintenance Guide," NP-7502, Res. Project 2814-35 Rep., 1992.
20. L. T. Higgins and L. C. Morrow, Maintenance Engineering Handbook. New York: McGraw-Hill, 1977.
21. P. J. Tanver and J. Penman, Condition Monitoring of Electrical Machines. Hertfordshire, U.K.: Research Studies Press, 1987.
22. P. Vas, Parameter Estimation, Condition Monitoring, and Diagnosis of Electrical Machines. Oxford, U.K.: Clarendon Press, 1993.
23. P. Krause, O. Wasynczuk, and S. D. Sudhoff, Analysis of Electric Machinery. Piscataway, NJ: IEEE, 1995.
24. R. Englemann and W. Middendorf, Handbook of Electric Motors. New York: Marcel Dekker, 1995.
25. M. Y. Chow. Methodologies of Using Neural Network and Fuzzy Logic Technologies for Motor Incipient Fault Detection. Singapore: World Scientific, 1997.
26. C. M. Ong, Dynamic Simulation of Electric Machinery. Englewood Cliffs, NJ: Prentice-Hall, 1998.
27. Recommended Practice for Testing Insulation Resistance of Rotating Machinery, IEEE Std. 43-2000.
28. Guide for Testing Turn-to-Turn Insulation in Form Ound Stator Coils for AC Rotating Electric Machines, IEEE Std. 522-1992.
29. IEEE Recommended Practice - General Principles for Temperature Limits in the Rating of Electrical Eq., IEEE Std. 1-2000.
30. IEEE Standard Test Procedure for Polyphase Induction Motors and Generators, IEEE Std. 112-1996. May 8, 1997.
31. IEEE Recommended Practice for Monitoring and Instrumentation of Turbine Generators, IEEE Std. 1129-1992.
32. IEEE Standard Test Procedure for Single-Phase Induction Motors, IEEE Std. 114-2001.
33. Guide for Functional Evaluation of Insulation Systems for Large High Voltage Machines, IEEE Std. 434.
34. Voltage Endurance Testing of Form Wound Bars and Coils, IEEE Std. 1043.
35. Evaluation of Electrical Endurance of Electrical Insulation Systems IEC: 60 727-1.
36. Impulse Voltage Withstand Levels of Rotating AC Machines, IEC: 60034-15.
37. Guide for Determining the Effects of Ionizing Radiation on Insulating Materials, IEC: 60544.
38. Guide for the Determination of Thermal Endurance Properties of Electrical Insulating Materials, IEC: 60 216 - 1 to 4.
39. Thermal Evaluation and Classification of Electrical Insulation, IEC: 60 085.
40. Effects of Unbalanced Voltages on the Performance of 3-Phase Cage Induction Motors, IEC 60 892, Mar. 30, 1987.
41. Rotating Electrical Machines -Part 17: Cage Induction Motors When Fed From Converters-Application Guide, IEC 60034-17, Mar. 26, 2002.
42. Rotating Electrical Machines-Part 12: Starting Performance of Single-Speed Three-Phase Cage Induction Motors, IEC 60034-12, Apr. 09, 2002.
43. Rotating Electrical Machines - Part 26: Effects of Unbalanced Voltages on the Performance of Three-Phase Induction Motors, IEC 60 034-26, May 17, 2002.
44. Motors and Generators, ANSI/NEMA MG 1-1998.
45. Energy Management Guide for Selection and Use of Fixed Frequency Medium AC Squirrel-Cage Polyphase Induction Motor, NEMA MG10-2001.
46. D. R. Albright, "Method and Apparatus for Detecting Rotor Flux Variations in the Air-Gap of Dynamo-Electric Machines," U.S. Patent 3 506914, 1970.
47. R. F. Dumbeck, "Induction Motor Load Monitor and Control Apparatus," U.S. Patent 4 063 112, Dec. 1977.
48. D. A. Gephart and B. H. Weber, "Circuit for Monitoring the Mechanical Power from an Induction Motor and for Detecting Excessive Heat Exchanger Icing," U.S. Patent 4 123 792, Oct. 1978.
49. G. B. Kliman, "Spectral Analysis of Induction Motor Current to Detect Rotor Faults with Reduced False Alarms," U.S. Patent 5049 815, Sep. 1991.
50. T. Hatanaka and N. Kuwahara, "Method and Apparatus for Controlling the Supply of Power to an Induction Motor to Maintain High Efficiency Under Varying Load Conditions," U.S. Patent 5 241 256, Aug. 1993.
51. M. A. Masmr, X. Xu, and F. Liang, "Fault Isolation in an Induction Motor Control System," U.S. Patent 5 469 351, Nov. 1995.
52. G. B. Kliman, "Turn Fault Detection," U.S. Patent 5 477 163, Dec. 1995.
53. S. V. Bowers III and K. R. Piety, "Induction Motor Speed Determination by Flux Spectral Analysis," U.S. Patent 5 530 343, Jun. 1996.
54. T. Petsche and S. J. Hanson, "Neural Network Auto-Associator and Method for Induction Motor Monitoring," U.S. Patent 5 576 632, Nov. 1996.
55. T. Petsche and C. Garrett, "Radial Basis Function Neural Network Auto-Associator and Method for Induction Motor Monitoring," U.S. Patent 5 574 387, Nov. 1996.
56. Permissible Limits of Noise Level for Rotating Electrical Machines Bureau of Indian Standards IS: 12 065-1987, 1987.
57. Mechanical Vibration of Rotating Electrical Machines with Shaft Heights 56 mm and Higher-Measurement, Evaluation and Limits of Vibration Severity, Bureau of Indian Standards IS: 12 075-1987, 1987.
58. Code of Practice for Installation and Maintenance of Induction Motors Bureau of Indian Standards IS: 900-1992, 1992.
59. Guide on Effects of Unbalanced Voltages on the Performance of Three-Phase Cage Induction Motors, Bureau of Indian Standards IS: 13 529-1992, 1992.
60. Designation of Methods of Cooling of Rotating Electrical Machines, Bureau of Indian Standards IS: 6362-1995, 1995.
61. A. H. Bonnet, "Cause and analysis of stator and rotor failures in three-phase squirrel-cage induction motors," IEEE Trans. Ind. Appl. vol. 28, no. 4, pp. 921-437, Jul./Aug. 1992.
62. A. H. Bonnett and G. C. Soukpup, "Rotor failures in squirrel cage induction motors," IEEE Trans. Ind. Appl., vol. IA-22, no. 6, pp. 1165-1173, Nov./Dec. 1986.
63. Induction Motors (LV/HV) Failures and its Prevention Guidelines [On-line]. Available: www.indiaelectricmarket.com/cgi-bin/iemhome1/ recentadvances/inductionmotor
64. J. R. Cameron, W. T. Thomson, and A. B. Dow, "Vibration and current monitoring for detecting air gap eccentricity in large induction motors," Proc. Inst. Elect. Eng. B, vol. 133, no. 3, pp. 155-163, May 1986.
65. P. J. Tavner, B. G. Gaydon, and D. M. Ward, "Monitoring generators and large motors," Proc. Inst. Elect. Eng. B, vol. 133, no. 3, pp. 169-180, May 1986.
66. J. Perman, M. N. Dey, A. J. Tait, and W. E. Bryan, "Condition monitoring of electrical drives," Proc. Inst. Elect. Eng. B, vol. 133, no. 3, pp. 142-148, May 1986.
67. T. A. Lipo and K. C. Chang, "A new approach to flux and torque-sensing in induction machines," IEEE Trans. Ind. Applicant., vol. IA-12, no. 4, pp. 731-737, Jul./Aug. 1986.
68. S. V. Bowers and K. R. Piety. Proactive Motor Monitoring Through Temperature, Shaft Current and Magnetic Flux Measurements. [Online]. Available: www.compsys.com/files/ProactiveTCF.pdf
69. S. P. Verma, R. K. Singal, and K. Williams, "Vibration behavior of stators of electrical machines, PartI: Theoretical study," J. Sound Vib., vol. 115, pp. 1-12, 1987.
70. R. K. Singal, K. Williams, and S. P. Verma, "Vibration behavior of stators of electrical machines, PartII: Experimental study," J. Sound Vib., vol. 115, pp. 13-23, 1987.
71. O. M. Nassar, "The use of partial discharge and impulse voltage testing in the evaluation of intertum insulation failure of large motors," IEEE Trans. Energy Convers., vol. EC-2, no. 4, pp. 615-621, Dec. 1987.
72. B. K. Gupta, B. A. Lloyd, G. C. Stone, S. R. Campbell, D. K. Sharma, and N. E. Nilsson, "Turn insulation capability of large AC motors. Part 1 - Surge monitoring," IEEE Trans. Energy Convers., vol. EC-2, no. 4, pp. 658-665, Dec. 1987.
73. B. K. Gupta, B. A. Lloyd, G. C. Stone, D. K. Sharma, and J. P. Fitzgerald, "Turn insulation capability of large AC motors. Part 2 -Impulse strength," IEEE Trans. Energy Convers., vol. EC-2, no. 4, pp. 666-673, Dec. 1987.
74. B. K. Gupta, B. A. Lloyd, G. C. Stone, D. K. Sharma, N. E. Nilsson, and J. P. Fitzgerald, "Turn insulation capability of large AC motors. Part 3 -Insulation coordination," IEEE Trans. Energy Convers., vol. EC-2, no. 4, pp. 674-679, Dec. 1987.
75. J. C. Botts, "Corona in high voltage rotating machine windings," IEEE Elect. Insul. Mag., vol. 4, no. 4, pp. 29-34, Jul./Aug. 1988.
76. A. Boseolo, A. Contin, G. Rabach, and F. Tosato, "Computer-aided partial discharge distribution measurement system for large electrical machines diagnosis," in Proc. Int. Conf. Properties and Applications of Dielectric Materials, 1988, pp. 618-623.
77. E. P. Dick, B. K. Gupta, P. Pillai, A. Narang, and D. K. Sharma, "Practical calculation of switching surges at motor terminals," IEEE Trans. Energy Convers., vol. 3, no. 4, pp. 864-872, Dec. 1988.
78. R. Natarajan, "Failure identification of induction motors by sensing unbalanced stator currents," IEEE Trans. Energy Convers., vol. 4, no. 4, pp. 585-590, Dec. 1989.
79. D. E. Schump, "Improved detection method for winding surge tests of large AC motors," in Proc. Conf. IEEE Electrical Electronics Insulation Conf.-Int. Coil Winding Association Inc., 1989, pp. 292-294.
80. S. P. Verma, "Noise and vibrations of electrical machines and drives; Their production and means of reduction," in Proc. IEEE Intl. Conf. Power Electron., Drives and Energy Systems for Industrial Growth, vol. 2, Piscataway, NJ, 1996, pp. 1031-1037.
81. P. L. Timar, "Noise test on rotating electrical motors under load," Elect. Mach. Power Syst., vol. 20, pp. 339-353, 1992.
82. G. B. Kliman and J. Stein, "Methods of motor current signature analysis," Elect. Mach. Power Syst., vol. 20, pp. 463-474, Sept. 1992.
83. P. A. Zotos, "Motor failures due to steep fronted switching surges: The need for surge protection - User's experience," IEEE Trans. Ind. Appl., vol. 30, no. 6, pp. 1514-1524, Nov./Dec. 1994.
84. J. Penman, H. G. Sedding, B. A. Lloyd, and W. T. Fink, "Detection and location of intertum short circuits in the stator windings of operating motors," IEEE Trans. Energy Convers., vol. 9, no. 4, pp. 652-658, Dec. 1994.
85. Y.-S. Lee, J. K. Nelson, H. A. Scarton, D. Teng, and S. A. -Ghannad, "An acoustic diagnostic techniques for use with electric machine insulation," IEEE Trans. Dielectr. Electr. Insul., vol. 1, no. 6, pp. 1186-1193, Dec. 1994.
86. T. Tanaka, "Partial discharge pulse distribution pattern analysis," Proc. Inst. Elect. Eng., Sci. Meas. Technol., vol. 142, pp. 46-50, Jan. 1995.
87. I. J. Kemp, "Partial discharge plant-monitoring technology: Present and future developments," Proc. Inst. Elect. Eng., Sci. Meas. Technol. vol. 142, pp. 4-10, Jan. 1995.
88. G. C. Stone and H. G. Sedding, "In- Service evaluation of motor and generator stator windings under partial discharge tests," IEEE Trans. Ind. Appl., vol. 31, no. 2, pp. 299-303, Mar./Apr. 1995.
89. J. S. Hsu, "Monitoring of defects in induction motors through air-gap torque observation," IEEE Trans. Ind. Appl., vol. 31, no. 5, pp. 1016-1021, Sep./Oct. 1995.
90. W. T. Thomson, "On-line current monitoring to detect rotor winding and electromechanical problems in induction motor drives," in Proc. Inst. Elect. Eng. Coll. Elect. Mach., Jan. 1995, pp. 8/1-8 /6.
91. G. C. Stone, H. G. Sedding, and M. J. Costello, "Application of partial discharge testing to motor and generator stator winding maintenance," IEEE Trans. Ind. Appl., vol. 32, no. 2, pp. 459-464, Mar./Apr. 1996.
92. S. F. Legowski, A. H. M. S. Ula, and A. M. Trzynadlowski, "Instantaneous power as a medium for the signature analysis of induction motors," IEEE Trans. Ind. Appl., vol. 32, no. 4, pp. 904-909, Jul./Aug. 1996.
93. S. C. Chang and R. Yacamini, "Experimental study of the vibrational behavior of machine stators," Proc. Inst. Elect. Eng., Elect. Power Appl., vol. 143, no. 3, pp. 242-250, May 1996.
94. -D. G. Dorrell, W. T. Thomson, and S. Roach, "Analysis of air gap flux, current and vibration signals as a function of the combination of static and dynamic air gap eccentricity in the 3-phase induction motors," IEEE Trans. Ind. Appl., vol. 33, no. 1, pp. 24-34, Jan./Feb. 1997.
95. M. A. Cash, T. G. Habetler, and G. B. Kliman, "Insulation failure prediction in induction machines using line-neutral voltages," in Proc. IEEE Ind. Applicat. Soc. Annu. Meeting, vol. 1, Oct. 1997, pp. 208-212.
96. B. Yazici, G. B. Kliman, W. J. Premerlani, R. A. Koegl, and A. Abdel-Malek, "An adaptive, on-line, statistical method for detection of broken bars in motors using stator current and torque estimation," in Proc. IEEE Ind. Applicat. Soc. Annu. Meeting, vol. 1, Oct. 1997, pp. 221-226.
97. J. Castellon, J. Bouquqrt, J. P. Reboul, and A. Toureille, "A new tool to study the aging of the winding insulation of electrical machines," in Annu. Rep.-IEEE Conf. Elect. Insulation Dielectric Phenomena, vol. 2, Minneapolis, MN, Oct. 1997, pp. 447-450.
98. O. V. Thorsen and M. Dalva, "Condition monitoring methods, failure identification and analysis for high voltage motors in petrochemical industry," Proc. Inst. Elect. Eng., Elect. Mach. Drives, pp. 109-113, 1997.
99. Y. Takezawa, Y. Itoh, M. Shimodera, and H. Miya, "Development of a portable diagnostic apparatus for coil insulators in low-voltage induction motors," IEEE Trans. Dielect. Elect. Insulation, vol. 5, no. 2, pp. 290-295, Apr. 1998.
100. W. T. Thomson and M. Fenger, "Current signature analysis to detect induction motor faults," IEEE Ind. Appl. Mag., vol. 7, no. 4. pp. 26-34, July/Aug. 2001.
101. S. P. Verma and A. Balan, "Experimental investigations on the stators of electrical machines in relation to vibration and noise problems," Proc. Inst. Elect. Eng., Elect. Power Appl., vol. 145, no. 5, pp. 455-461, Sept. 1998.
102. A. Bethge, P. K.-W. Lo, J. T. Phillipson, and J. R. Weidner, "On-line monitoring of partial discharge on stator windings of large rotating machines in the petrochemical environment," IEEE Trans. Ind. Appl. vol. 34, no. 6, pp. 1359-1365, Nov./Dec. 1998.
103. M. A. Cash, H. G. Habetler, and G. B. Kliman, "Insulation failure prediction in AC machines using line-neutral voltages," IEEE Trans. Ind. Appl., vol. 34, no. 6, pp. 1234-1239, Nov./Dec. 1998.
104. C. M. Riley, B. K. Lin, T. G. Habetler, and R. R. Schoen, "A method for sensor less on-line vibration monitoring of induction machines," IEEE Trans. Ind. Appl., vol. 34, no. 6, pp. 1240-1245, Nov./Dec. 1998.
105. C. M. Riley, B. K. Lin, T. G. Habetler, and G. B. Kliman, "Stator current harmonics and their causal vibrations: A preliminary investigation of sensor less vibration monitoring applications," IEEE Trans. Ind. Appl., vol. 35, no. 1, pp. 94-99, Jan./Feb. 1999.
106. A. Golubev and V. Tsvetkov, "On-line shock vibration diagnostics of large electric machines," in Proc. Pulp and Paper Industry Technical Annual Conf., 1999, pp. 119-123.
107. S. M. Tetrault, G. C. Stone, and H. G. Sedding, "Monitoring partial discharges on 4-kV motor windings," IEEE Trans. Ind. Appl., vol. 35, no. 3, pp. 682-688, May/Jun. 1999.
108. H. W. Penrose and J. Jette, "Static motor circuit analysis: An introduction to theory and application," IEEE Electr. Insul. Mag. vol. 16, no. 4, pp. 6-10, July/Aug. 2000.
109. H. W. Penrose, "Evaluation of electric motor condition using motor circuit analysis," in Proc. Conf. Insulation Conf. Electrical Manufacturing Coil Winding Conf., 2001, pp. 335-340.
110. A. Stavrou, H. G. Sedding, and J. Penman, "Current monitoring for detecting inter-turn short circuits in induction motors," IEEE Trans. Energy Convers., vol. 16, no. 1, pp. 32-37, Mar. 2001.
111. C. Wang, A. Astfalck, and J. C. S. Lai, "Sound power radiated from an inverter-driven induction motor: Experimental investigation," Proc. Inst. Elect. Eng., Elect. Power Appl., vol. 149, no. 1, pp. 46-52, Jan. 2002.
112. M. S. N. Said and M. E. H. Benbouzid, "H-G diagram based rotor parameters identification for induction motors thermal monitoring," IEEE Trans. Energy Convers., vol. 15, no. 1, pp. 14-18, Mar. 2002.
113. X. Wang, S. Chen, W. Wang, Y. Sun, and L. Xu, "A study of armature winding internal faults for turbogenerators," IEEE Trans. Ind. Appl. vol. 38, pp. 625-631, May/Jun. 2002.
114. A. B. Sasi, B. Payne, A. York, F. Gu, and A. Ball, Condition Monitoring of Electric Motors Using Instantaneous Angular Speed. [Online]. Available: www.maintenance.org.uk/RESEARCH/Marcon%2001%20publications/ Ahmed.pdf
115. H. W. Penrose, "Motor circuit analysis standards," MCA Newsletter June 2002.
116. G. C. Stone and V. Warren, Comparison of New Stator Winding Testing Technologies. [Online]. Available: www.irispower.com/techpapers/ tp34.html
117. Riding the Reflected Wave to Improve Variable-Speed AC Motor Reliability. Rockwell Int. Corp. [Online]. Available: www.reliance.com/ pdfelements/d7722/
118. "Variable frequency drives optimize performance and protection of off-shore oil electric submersible pumps," in Allen -Bradley Variable Frequency Drives Application Notes. Milwaukee, WI: Rockwell Automation.
119. Insulation for Inverter Fed Motors [Online]. Available: www.techcentre.tde.alstom.com
120. D. Leith, N. D. Deans, and L. I. D. Stewart, "Condition monitoring of electrical machine using real time expert systems," in Proc. Int. Conf. Electrical Machines, vol. 3, Pisa, Italy, Sep. 1988, pp. 297-302.
121. F. Filippetti, G. Franceschini, M. Martelli, and C. Tassoni, "An approach to knowledge representation about induction machine diagnostics in expert systems," in Proc. Int. Conf. Electrical Machines, vol. 3, Pisa, Italy, Sept. 1988, pp. 289-296.
122. W. T. Thomson, "Research and development of on-line diagnostic monitoring systems for electrical machines," Proc. Inst. Elect. Eng., Coll. Instrumentation of Rotating Electrical Machines, pp. 5/ 1-5/7, 1991.
123. J. Luo and Q.-F. Yang, "A new scheme of fault detection based on neural nets," in Proc. IEEE Int. Symp. Ind. Electron., vol. 2, 1992, pp. 580-583.
124. P. V. Goode and M. Y. Chow, "A hybrid fuzzy/neural system used to extract heuristic knowledge from a fault detection problem," in Proc. 3rd Conf. Fuzzy Syst., vol. 3, 1994, pp. 1731-1736.
125. F. Filippetti, "Neural networks approach to electric machine on-line diagnostics," in Proc. 5th Eur. Conf. Power Electron. Applicat., 1993, pp. 213-218.
126. A. J. M. Cardoso and E. S. Saraiva, "Computer-aided detection of air gap eccentricity in operating three-phase induction motors by Park's vector approach," IEEE Trans. Ind. Appl., vol. 29, no. 5, pp. 879-901, Sep./ Oct. 1993.
127. J. Penman and C. M. Yin, "Feasibility of using unsupervised learning, artificial neural networks for the condition monitoring of electrical machines," Proc. Inst. Elect. Eng., Elect. Power Appl., vol. 141, no. 6, pp. 317-322, Nov. 1994.
128. P. V. Goode and M. Y. Chow, "Using a neural/fuzzy system to extract knowledge of incipient fault in induction motors (Part I and Part II)," IEEE Trans. Ind. Electron., vol. 42, no. 2, pp. 131-146, Apr. 1995.
129. F. Filippetti, G. Franceschini, and C. Tassoni, "Neural networks aided on-line diagnostics of induction motor rotor faults," IEEE Trans. Ind. Applicat., vol. 31, no. 4, pp. 892-899, Jul./Aug. 1995.
130. M. Kezunovic, I. Rikalo, and D. J. Sobajic, "High-speed fault detection and classification with neural nets," Elect. Power Syst. Res., vol. 34, pp. 109-116, 1995.
131. R. R. Schoen, B. K. Lin, T. G. Habetler, J. H. Schlag, and S. Farag, "An unsupervised, on-line system for induction motor fault detection using stator current monitoring," IEEE Trans. Ind Appl., vol. 31, no. 6, pp. 1280-1286, Nov./Dec. 1995.
132. F. Filippetti, S. Piran, L. Tommasini, and G. Franceschin, "A lab VIEW based virtual instrument for on-line induction motor parameters identification," in Proc. IEEE Int. Symp. Industrial Electronics, vol. 2, 1995, pp. 648-653.
133. T. W. S. Chow et al., "Three phase induction machines asymmetrical faults identification using bispectrum," IEEE Trans. Energy Convers., vol. 10, no. 4, pp. 688-693, Dec. 1995.
134. L. Collamati, F. Filippetti, G. Franceschini, S. Pirani, and C. Tassoni, "Induction machine stator fault on-line diagnosis based on lab VIEW environment," in Proc. Mediterranean Electrotechnical Conf., vol. 1, 1996, pp. 495-498.
135. A. W. Galli et al., "Exploring the power of wavelet analysis," IEEE Comput. Appl. Power, vol. 9, pp. 37-41, Oct. 1996.
136. A. C. McCormick and A. K. Nandi, "Classification of the rotating machine condition monitoring using artificial neural networks," in Proc. Inst. Mech. Eng., vol. 211, 1997, pp. 439-450.
137. F. Filippetti, G. Franceschini, C. Tassoni, and P. Vas, "AI techniques in induction machines diagnostics including the speed ripple effect," IEEE Trans. Ind. Appl., vol. 34, no. 1, pp. 98-108, Jan./Feb. 1998.
138. G. Betta, C. Liguori, and A. Pietrosanto, "An advanced neural-network-based instrument fault detection and isolation scheme," IEEE Trans. Instrum. Meas., vol. 47, no. 2, pp. 507-512, Apr. 1998.
139. M. E. H. Benbouzid et al., "Induction motors faults detection and localization using stator current advanced signal processing techniques," IEEE Trans. Power Electron., vol. 14, no. 1, pp. 14-22, Jan. 1999.
140. S. Kolla and L. Varatharasa, "Identifying three-phase induction motor faults using artificial neural networks," ISA Trans., vol. 39, pp. 433-439, 2000.
141. I. Lasurt, A. F. Stronach, and J. Penman, "A fuzzy logic approach to the interpretation of higher order spectra applied to fault diagnosis in electrical machines," in Proc. 19th Int. Conf. North American Fuzzy Information Processing Society, 2000, pp. 158-162.
142. M. S. N. Said, M. E. H. Benbouzid, and A. Benchaib, "Detection of broken bars in induction motors using an extended Kalman filter for rotor resistance sensoprless estimation," IEEE Trans. Energy Convers., vol. 15, no. 1, pp. 66-70, Mar. 2000.
143. F. Filippetti, G. Franceschini, C. Tassoni, and P. Vas, "Recent developments of induction motor drives fault diagnosis using AI techniques," IEEE Trans. Ind. Electron., vol. 47, no. 5, pp. 994-1003, Oct. 2000.
144. N. Arthur and J. Penman, "Induction machine condition monitoring with higher order spectra," IEEE Trans. Ind. Electron., vol. 47, no. 5, pp. 1031-1041, Oct. 2000.
145. D.-M. Yang and J. Penman, "Intelligent detection of induction motor bearing faults using current and vibration monitoring," in Proc. Condition Monitoring Diagnostics Engineering Management, Dec. 2000, pp. 461-470.
146. D. Borras, M. Castilla, and J. C. Montano, "Wavelet and neural structure: A new tool for diagnostic of power system disturbances," IEEE Trans. Ind. Appl., vol. 37, no. 1, pp. 184-190, Jan./Feb. 2001.
147. R. M. Tallam, T. G. Habetler, and R. G. Harley, "Continual on-line training of neural networks with applications in electric machines fault diagnosis," in Proc. IEEE 32nd Power Electronics Specialists Conf. 2001, pp. 2224-2228.
148. Z. Ye, B. Wu, and A. R. Sadeghian, "Electrical machine fault detection using adaptive neuro-fuzzy inference," in Proc. Joint 9th Int. Fuzzy Systems Association World Congress 20th North American Fuzzy Information Processing Society.
149. M. Arkan, D. K. Perovic, and P. Unsworth, "Online stator fault diagnosis in induction motors," Proc. Inst. Elect. Eng., Electr. Power Appl., vol. 148, pp. 537-546, Nov. 2001.
150. C. Durieu, L. Loron, E. Sedda, and I. Zein. Fault detection of an induction motor by set-membership filtering and Kalman filtering. [Online]. Available: www.utc.fr/lec/Publications/articles/1999/ ecc_Durieu.pdf
151. Y. Zhongming, W. Bin, and A. R. Sadeghian, "Electrical machine fault detection using adaptive neuro-fuzzy inference," in Proc. Joint 9th Int. Fuzzy Systems Association World Congress 20th North American Fuzzy Information Processing Society, 2001, pp. 390-394.
152. C. Combastel, S. Lesecq, S. Petropol, and S. Gentil, "Model-based and wavelet approaches to induction motor on-line fault detection," Control Eng. Practice, vol. 10, pp. 493-509, 2002.
153. K. Kim and A. G. Parlos, "Induction motor fault diagnosis based on neuropredictors and wavelet signal processing," IEEE/ASME Trans. Mechatron., vol. 7, pp. 201-219, June 2002.
154. A. Bellini, A. D. Carli, and M. A. Cava, "Parameter identification for induction motor simulation," Automatica, vol. 12, pp. 383-386, 1976.
155. A. K. Chattopadhyay and T. J. Rao, "A generalized method of computer simulation for induction motors with stator current discontinuities and its application to a cycloconverter-fed drive," IEEE Trans. Ind. Appl., vol. IA-16, no. 2, pp. 234-241, Mar./Apr. 1980.
156. T. A. Lipo and A. Consoli, "Modeling and simulation of induction motors with saturable leakage reactances," IEEE Trans. Ind. Appl., vol. IA-20, no. 1, pp. 180-189, Jan./Feb. 1983.
157. R. J. Lee, P. Pillay, and R. G. Harley, "D, Q reference frames for the simulation of induction motors," Electric Power Syst. Res., vol. 8, pp. 15-26, 1984/85.
158. S. Williamson and K. Mirzoian, "Analysis of cage induction motors with stator winding faults," IEEE Trans. Power App. Syst., vol. PAS-104, pp. 1838-1842, Jul. 1985.
159. G. Andria, A. Dell'Aquila, L. Salvatore, and M. Savino, "Improvement in modeling and testing of induction motors," IEEE Trans. Energy Convers., vol. EC-2, no. 2, pp. 285-293, Jun. 1987.
160. A. Keyhani and H. Tsai, "IGSPICE simulation of induction machines with saturable inductances," IEEE Trans. Energy Convers., vol. 4, no. 1, pp. 118-125, Mar. 1989.
161. H. A. Smolleck and B. Robertson, "Dynamic simulation of induction-motor starting using the microcomputer," Elect. Power Syst. Res., vol. 16, pp. 227-236, 1989.
162. G. R. Slemon, "Modeling of induction machines for electric drives," IEEE Trans. Ind. Appl., vol. 25, no. 6, pp. 1126-1131, Nov./Dec. 1989.
163. F. C. Trutt, "Steady state analysis of wound-rotor induction machines with simultaneous stator and/or rotor faults," Elect. Mach. Power Syst., vol. 16, pp. 35-48, 1989.
164. X. Luo, Y. Liao, H. A. Toliyat, A. El-Antably, and T. A. Lipo, "Multiple coupled circuit modeling of induction machines," IEEE Trans. Ind. Appl., vol. 31, no. 2, pp. 311-318, Mar./Apr. 1995.
165. J. Faiz and A. R. Seifi, "Dynamic analysis of induction motors with saturable inductances," Elect. Power Syst. Res., vol. 34, pp. 205-210, 1995.
166. B. Laporte, G. Vinsard, and J. C. Mercier, "A computation method for induction motors in steady-state," Math. Comput. Simul., vol. 38, pp. 369-376, 1995.
167. Y. Zhao and T. A. Lipo, "Modeling and control of a multi-phase induction machine with structural unbalance," IEEE Trans. Energy Convers., vol. 11, pp. 578-584, Sep. 1996.
168. D. Dolinar, R. D. Weerdt, R. Belmans, and E. M. Freeman, "Calculation of two-axis induction motor model parameters using finite elements," IEEE Trans. Energy Convers., vol. 12, no. 2, pp. 133-140, Jun. 1997.
169. R. R. Schoen and T. G. Habetler, "A new method of current-based condition monitoring in induction machines operating under arbitrary load conditions," Elect. Mach. Power Syst., vol. 25, pp. 141-152, 1997.
170. L. Kruger, D. Naunin, and C. Garbrecht, "Stochastic and neural models of an induction motor," Math. Comput. Simul., vol. 46, pp. 313-324, 1998.
171. A. I. Orille, G. M. A. Sowilam, and J. A. Valencia, "A new simulation of symmetrical three phase induction motor under transformations of Park," Comput. Ind. Eng., vol. 37, pp. 359-362, 1999.
172. A. R. Munoz, "Using an autoregressive model in the detection of abnormal characteristics of squirrel cage induction motors," Elect. Power Syst. Res., vol. 55, pp. 73-77, 2000.
173. A. Bellini, F. Filippetti, G. Franceschini, and C. Tassoni, "Closed-loop control impact on the diagnosis of induction motors faults," IEEE Trans. Ind. Applicat., vol. 36, no. 5, pp. 1318-1329, Sep./Oct. 2000.
174. D. Bispo, L. M. Neto, J. T. de Resende, and D. A. de Andrade, "A new strategy for induction machine modeling taking into account the magnetic saturation," IEEE Trans. Ind. Applicat., vol. 37, no. 6, pp. 1710-1719, Nov./Dec. 2001.
175. D. Henry, A. Zolghadri, M. Monsion, and F. Cazaurang, "Fault diagnosis in induction machines using the generalized structured singular value," Control Eng. Practice, vol. 10, pp. 587-598, 2002.
176. R. M. Tallam, T. G. Habetler, and R. G. Harley, "Transient model for induction machines with stator winding turn faults," IEEE Trans. Ind. Appl., vol. 38, no. 3, pp. 632-637, May/Jun. 2002.
177. B. Liang, B. S. Payne, A. D. Ball, and S. D. Iwnicki, "Simulation and fault detection of three-phase induction motors," Math. Comput. Simul., pp. 1-15, Nov. 2002.
178. S. Nandi, R. M. Bharadwaj, and H. A. Toliyat, "Performance analysis of a three-phase induction motor under mixed eccentricity condition," IEEE Trans. Energy Convers., vol. 17, no. 3, pp. 392-399, Sep. 2002.
179. S. Chen, E. Zhong, and T. A. Lipo, "A new approach to motor condition monitoring in induction motor drives," IEEE Trans. Ind. Appl., vol. 30, no. 4, pp. 905-911, Jul./Aug. 1994.
180. H. T. Grimmelius, P. P. Meiler, H. L. M. M. Maas, B. Bonnier, J. S. Grevink, and R. F. V. Kuilenburg, "Three state-of-the-art methods for condition monitoring," IEEE Trans. Ind. Electron., vol. 46, no. 2, pp. 407-416, Apr. 1999.
181. S. Nandi and H. A. Toliyat, "Novel frequency-domain-based technique to detect stator intertum faults in induction machines using stator-induced voltages after switch-off," IEEE Trans. Ind. Appl., vol. 38, no. 1, pp. 101-109, Jan./Feb. 2002.
182. The Future for Electric Motors? (2001, Oct.). [Online]. Available: www.industrialtechnology .co.uk/2001/oct/abb.html
183. A. K. Nandi and L. B. Jack, Condition Monitoring Using Intelligent Systems. [Online]. Available: www.liv.ac.uk/EEE/research/spc/ project13.htm