High performance CaO-based sorbents for pre- And postcombustion CO2 capture at high temperature

Energy Procedia

Volumn 63, Issue , 2014, Pages 2207-2215

  Kazi, Saima Sultana ^a   Aranda, Asunción ^a   Meyer, Julien ^a   Mastin, Johann ^a  

^a Institute of Energy Technology (IFE)   (Norway)

Author keywords

Cao; Carbonation calcination; CO2 capture; CO2 sorbent; Hydrothermal; Mayenite

Indexed keywords

EID: 84922875033     PISSN: 18766102     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1016/j.egypro.2014.11.240     Document Type: Conference Paper

References (31)

1. 2 with lime, Energy Fuels, 17 (2003) 308-315.
2. 2 capture, Energy Fuels, 20 (2006) 2417- 2420.
3. 2 capture, Energy Procedia, 4 (2011) 830-838.
4. 2 capture, Progress in Energy and Combustion Science, 36 (2010) 260-279.
5. 2 capture system using CaO, Environmental Science & Technology, 41 (2007) 5523-5527.
6. N.H. Florin, A.T. Harris, Enhanced hydrogen production from biomass with in situ carbon dioxide capture using calcium oxide sorbents, Chem. Eng. Sci., 63 (2008) 287-316.
7. D. Alvarez, J.C. Abanades, Pore-size and shape effects on the recarbonation performance of calcium oxide submitted to repeated calcination/recarbonation cycles, Energy Fuels, 19 (2004) 270-278.
8. P.S. Fennell, R. Pacciani, J.S. Dennis, J.F. Davidson, A.N. Hayhurst, The effects of repeated cycles of calcination and carbonation on a variety of different limestones, as measured in a hot fluidized bed of sand, Energy Fuels, 21 (2007) 2072-2081.
9. 2 capture capacity of CaO in long series of carbonation/calcination cycles, Ind. Eng. Chem. Res., 45 (2006) 8846-8851.
10. 2 capture, Combust. Sci. Technol., 184 (2012) 929-941.
11. Z. Chen, J.R. Grace, C. Jim Lim, Limestone particle attrition and size distribution in a small circulating fluidized bed, Fuel, 87 (2008) 1360- 1371.
12. S. Choi, J.H. Drese, C.W. Jones, Adsorbent materials for carbon dioxide capture from large anthropogenic point sources, Chem Sus Chem, 2 (2009) 796-854.
13. 2 sorbent, Ind. Eng. Chem. Res., 47 (2007) 180-184.
14. 2 sorption capacity and stability on multicycle operation, Ind. Eng. Chem. Res., 47 (2008) 9537-9543.
15. 2 capture during extended operating cycles, The Journal of Physical Chemistry C, 115 (2011) 24804-24812.
16. 2 Reactive Adsorbent, Ind. Eng. Chem. Res., 49 (2010) 2701-2706.
17. 2 capture behavior of calcium-based sorbent during calcium looping cycle, Fuel Process. Technol., 90 (2009) 825-834.
18. 33 as additives, Korean J. Chem. Eng., 28 (2011) 1042-1046.
19. 2 sorbent, Ind. Eng. Chem. Res., 45 (2006) 1911-1917.
20. 2 -capture, Energy Procedia, 4 (2011) 1184-1191.
21. Z.-s. Li, N.-s. Cai, Y.-y. Huang, H.-j. Han, Synthesis, experimental studies, and analysis of a new calcium-based carbon dioxide absorbent, Energy Fuels, 19 (2005) 1447-1452.
22. K. Johnsen, H.J. Ryu, J.R. Grace, C.J. Lim, Sorption-enhanced steam reforming of methane in a fluidized bed reactor with dolomite as - Acceptor, Chem. Eng. Sci., 61 (2006) 1195-1202.
23. K. Sato, S. Fujita, K. Suzuki, T. Mori, High performance of Ni-substituted calcium aluminosilicate for partial oxidation of methane into syngas, Catal. Commun., 8 (2007) 1735-1738.
24. 3-y) studied by neutron thermo diffractometry, J. Eur. Ceram. Soc., 28 (2008) 1737-1748.
25. 2 by a synthetic, CaO-containing sorbent, Chem. Eng. Sci., 64 (2009) 2147- 2157.
26. 2 sorbents, Environmental Science & Technology, 48 (2014) 5322-5328.
27. 33): A high-temperature neutron powder diffraction study, Acta Crystallographica Section B, 63 (2007) 675-682.
28. 33, Nature, 332 (1988) 525-526.
29. 33, Mater. Res. Bull., 23 (1988) 1033-1038.
30. 33 - A possible high-temperature moisture sensor, J. Appl. Electrochem., 19 (1989) 410-412.
31. X. Yao, H. Zhang, H. Yang, Q. Liu, J. Wang, G. Yue, An experimental study on the primary fragmentation and attrition of limestones in a fluidized bed, Fuel Process. Technol., 91 (2010) 1119-1124.