메뉴 건너뛰기




Volumn 16, Issue 4, 2014, Pages 451-467

Modeling and optimization of turning duplex stainless steels

Author keywords

Cuckoo search; Duplex stainless steels; Operational sustainability index; Response surface methodology; TOPSIS

Indexed keywords

ANALYSIS OF VARIANCE (ANOVA); CORROSION RESISTANCE; COSTS; CUTTING; CUTTING FLUIDS; EXPERT SYSTEMS; FUZZY INFERENCE; NEURAL NETWORKS; OPTIMIZATION; STEEL CORROSION; SURFACE PROPERTIES; SUSTAINABLE DEVELOPMENT; TURNING;

EID: 84922827258     PISSN: 15266125     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jmapro.2014.05.004     Document Type: Article
Times cited : (63)

References (58)
  • 3
    • 0042911850 scopus 로고    scopus 로고
    • The investigation on the prediction of tool wear and the determination of optimum cutting conditions in machining 17-4PH stainless steel
    • Chien WT, Tsai CS. The investigation on the prediction of tool wear and the determination of optimum cutting conditions in machining 17-4PH stainless steel. J Mater Process Technol 2003;140:340-5.
    • (2003) J Mater Process Technol , vol.140 , pp. 340-345
    • Chien, W.T.1    Tsai, C.S.2
  • 4
    • 1842484481 scopus 로고    scopus 로고
    • Determination of optimum cutting parameters during machining of AISI 304 austenitic stainless steel
    • Korkut I, Kasap M, Ciftci I, Seker U. Determination of optimum cutting parameters during machining of AISI 304 austenitic stainless steel. Mater Des 2004;25(4):303-5.
    • (2004) Mater des , vol.25 , Issue.4 , pp. 303-305
    • Korkut, I.1    Kasap, M.2    Ciftci, I.3    Seker, U.4
  • 5
    • 33745061341 scopus 로고    scopus 로고
    • Hard AlTiN, AlCrN PVD coatings for machining of austenitic stainless steel
    • Endrino J, Fox GR, Gey C. Hard AlTiN, AlCrN PVD coatings for machining of austenitic stainless steel. Surf Coat Technol 2006;200(24):6840-5.
    • (2006) Surf Coat Technol , vol.200 , Issue.24 , pp. 6840-6845
    • Endrino, J.1    Fox, G.R.2    Gey, C.3
  • 6
    • 71849112579 scopus 로고    scopus 로고
    • Finite element modelling of machining of AISI 316 steel: Numerical simulation and experimental validation
    • Maranhäo C, Davim JP. Finite element modelling of machining of AISI 316 steel: numerical simulation and experimental validation. Simul Model Pract Theory 2012;18(2):139-56.
    • (2012) Simul Model Pract Theory , vol.18 , Issue.2 , pp. 139-156
    • Maranhäo, C.1    Davim, J.P.2
  • 7
    • 84863727835 scopus 로고    scopus 로고
    • Experimental investigations on machinability aspects in finish hard turning of AISI 4340 steel using uncoated and multilayer coated carbide inserts
    • Sahoo AK, Sahoo B. Experimental investigations on machinability aspects in finish hard turning of AISI 4340 steel using uncoated and multilayer coated carbide inserts. Measurement 2012;45(8):2153-65.
    • (2012) Measurement , vol.45 , Issue.8 , pp. 2153-2165
    • Sahoo, A.K.1    Sahoo, B.2
  • 8
    • 84922822456 scopus 로고    scopus 로고
    • Experimental investigation and mathematical modeling of the composite ceramic cutting tools with alumina base in the machining process of PH-hardened austenitic-ferritic (Duplex) stainless steel
    • Ahmadi E, Homami RM, Rahmati S. Experimental investigation and mathematical modeling of the composite ceramic cutting tools with alumina base in the machining process of PH-hardened austenitic-ferritic (Duplex) stainless steel. Int J AdvDes Manuf Technol 2012;5(2):17-25.
    • (2012) Int J AdvDes Manuf Technol , vol.5 , Issue.2 , pp. 17-25
    • Ahmadi, E.1    Homami, R.M.2    Rahmati, S.3
  • 9
    • 84873838591 scopus 로고    scopus 로고
    • Optimization of cutting fluids and cutting parameters during end milling by using D-optimal design of experiments
    • Kurama E, Ozcelik B, Bayramoglu M, Demirbas E, Simsek BT. Optimization of cutting fluids and cutting parameters during end milling by using D-optimal design of experiments. J Clean Prod 2013;42:159-66.
    • (2013) J Clean Prod , vol.42 , pp. 159-166
    • Kurama, E.1    Ozcelik, B.2    Bayramoglu, M.3    Demirbas, E.4    Simsek, B.T.5
  • 10
    • 37549013346 scopus 로고    scopus 로고
    • Modelingthe effects of cutting parameters in MQL-employed finish hard-milling process using D-optimal method
    • Iqbal A, Ning H, Khan I, Liang L, Dar NU. Modelingthe effects of cutting parameters in MQL-employed finish hard-milling process using D-optimal method. J Mater Process Technol 2008;199(1-3):379-90.
    • (2008) J Mater Process Technol , vol.199 , Issue.1-3 , pp. 379-390
    • Iqbal, A.1    Ning, H.2    Khan, I.3    Liang, L.4    Dar, N.U.5
  • 11
    • 84865046536 scopus 로고    scopus 로고
    • Prediction and optimization of end milling process parameters of cast aluminium based MMC
    • Arokiadass R, Palaniradja K, Alagumoorthi N. Prediction and optimization of end milling process parameters of cast aluminium based MMC. Trans Nonferrous Met Soc China 2012;22(7):1568-74.
    • (2012) Trans Nonferrous Met Soc China , vol.22 , Issue.7 , pp. 1568-1574
    • Arokiadass, R.1    Palaniradja, K.2    Alagumoorthi, N.3
  • 12
    • 0041909895 scopus 로고    scopus 로고
    • Optimization of electrochemical polishing of stainless steel by grey relational analysis
    • Kao P, Hocheng H. Optimization of electrochemical polishing of stainless steel by grey relational analysis. J Mater Process Technol 2003;140(1):255-9.
    • (2003) J Mater Process Technol , vol.140 , Issue.1 , pp. 255-259
    • Kao, P.1    Hocheng, H.2
  • 13
    • 33750496403 scopus 로고    scopus 로고
    • Multi-response optimization of CFAAFM process through Taguchi method and utility concept
    • Walia R, Shan H, Kumar P. Multi-response optimization of CFAAFM process through Taguchi method and utility concept. Mater Manuf Process 2006;21(8):907-14.
    • (2006) Mater Manuf Process , vol.21 , Issue.8 , pp. 907-914
    • Walia, R.1    Shan, H.2    Kumar, P.3
  • 14
    • 33846960788 scopus 로고    scopus 로고
    • Design optimization of cutting parameters for side milling operations with multiple performance characteristics
    • Chang CK, Lu HS. Design optimization of cutting parameters for side milling operations with multiple performance characteristics. IntJAdv Manuf Technol 2007;32(1-2):18-26.
    • (2007) IntJAdv Manuf Technol , vol.32 , Issue.1-2 , pp. 18-26
    • Chang, C.K.1    Lu, H.S.2
  • 15
    • 42949156694 scopus 로고    scopus 로고
    • Taguchi optimization in drilling of AISI 316L stainless steel to minimize burr size using multiperformance objective based on membership function
    • Gaitonde V, Karnik S, Achyutha B, Siddeswarappa B. Taguchi optimization in drilling of AISI 316L stainless steel to minimize burr size using multiperformance objective based on membership function. J Mater Process Technol 2008;202(1-3):374-9.
    • (2008) J Mater Process Technol , vol.202 , Issue.1-3 , pp. 374-379
    • Gaitonde, V.1    Karnik, S.2    Achyutha, B.3    Siddeswarappa, B.4
  • 16
    • 62249202133 scopus 로고    scopus 로고
    • Multiperformance optimization in turning of free-machining steel using taguchi method and utility concept
    • Gaitonde V, Karnik S, Davim JP. Multiperformance optimization in turning of free-machining steel using taguchi method and utility concept. J Mater Eng Perform 2009;18(3):231-6.
    • (2009) J Mater Eng Perform , vol.18 , Issue.3 , pp. 231-236
    • Gaitonde, V.1    Karnik, S.2    Davim, J.P.3
  • 17
    • 84907857177 scopus 로고    scopus 로고
    • Application of TOPSIS in the Taguchi method for optimal machining parameter selection
    • Singh A, Datta S, Mahapatra SS. Application of TOPSIS in the Taguchi method for optimal machining parameter selection. J Manuf Sci Prod 2011;11(1-3):49-60.
    • (2011) J Manuf Sci Prod , vol.11 , Issue.1-3 , pp. 49-60
    • Singh, A.1    Datta, S.2    Mahapatra, S.S.3
  • 18
    • 84857375497 scopus 로고    scopus 로고
    • Application of taguchi approach and utility concept in solving the multi-objective problem when turning AISI 202 austenitic stainless steel
    • Kaladhar M, Subbaiah KV, Rao CS, Rao KN. Application of taguchi approach and utility concept in solving the multi-objective problem when turning AISI 202 austenitic stainless steel. J Eng Sci Technol Rev 2011;4(1):55-61.
    • (2011) J Eng Sci Technol Rev , vol.4 , Issue.1 , pp. 55-61
    • Kaladhar, M.1    Subbaiah, K.V.2    Rao, C.S.3    Rao, K.N.4
  • 20
    • 79959981089 scopus 로고    scopus 로고
    • Parametric optimization of some non-traditional machining processes using artificial bee colony algorithm
    • Samanta S, Chakraborty S. Parametric optimization of some non-traditional machining processes using artificial bee colony algorithm. Eng Appl Artif Intell 2011;24(6):946-57.
    • (2011) Eng Appl Artif Intell , vol.24 , Issue.6 , pp. 946-957
    • Samanta, S.1    Chakraborty, S.2
  • 22
    • 84883851074 scopus 로고    scopus 로고
    • Genetic algorithm-based optimization of cutting parameters in turning processes
    • D'Addona DM, Teti R. Genetic algorithm-based optimization of cutting parameters in turning processes. Procedia CIRP 2013;7:323-8.
    • (2013) Procedia CIRP , vol.7 , pp. 323-328
    • D'Addona, D.M.1    Teti, R.2
  • 23
    • 84881660978 scopus 로고    scopus 로고
    • Hybrid Taguchi-differential evolution algorithm for optimization of multi-pass turning operations
    • Yildiz AR. Hybrid Taguchi-differential evolution algorithm for optimization of multi-pass turning operations. Appl Soft Comput 2013;13(3):1433-9.
    • (2013) Appl Soft Comput , vol.13 , Issue.3 , pp. 1433-1439
    • Yildiz, A.R.1
  • 24
    • 84883185823 scopus 로고    scopus 로고
    • Multi-pass turning process parameter optimization using teaching-learning-based optimization algorithm
    • Rao RV, Kalyankar VD. Multi-pass turning process parameter optimization using teaching-learning-based optimization algorithm. Sci Iran 2013;20(3):967-74.
    • (2013) Sci Iran , vol.20 , Issue.3 , pp. 967-974
    • Rao, R.V.1    Kalyankar, V.D.2
  • 25
    • 33751536777 scopus 로고    scopus 로고
    • Multi-objective optimisation of high-speed electrical discharge machining process using a Taguchi fuzzy-based approach
    • Tzeng Y-C, Chen F-C. Multi-objective optimisation of high-speed electrical discharge machining process using a Taguchi fuzzy-based approach. Mater Des 2007;28(4):1159-68.
    • (2007) Mater des , vol.28 , Issue.4 , pp. 1159-1168
    • Tzeng, Y.-C.1    Chen, F.-C.2
  • 26
    • 79951576780 scopus 로고    scopus 로고
    • Taguchi-fuzzy multi output optimization (MOO) in high speed CNC turning of AISI P-20 tool steel
    • Gupta A, Singh H, Aggarwal A. Taguchi-fuzzy multi output optimization (MOO) in high speed CNC turning of AISI P-20 tool steel. Expert Syst Appl 2011;38(6):6822-8.
    • (2011) Expert Syst Appl , vol.38 , Issue.6 , pp. 6822-6828
    • Gupta, A.1    Singh, H.2    Aggarwal, A.3
  • 27
    • 81855178273 scopus 로고    scopus 로고
    • A grey-fuzzy Taguchi approach for optimizing multiobjective properties of zirconium-containing diamond-like carbon coatings
    • Yang YS, Huang W. A grey-fuzzy Taguchi approach for optimizing multiobjective properties of zirconium-containing diamond-like carbon coatings. Expert Syst Appl 2012;39(1):743-50.
    • (2012) Expert Syst Appl , vol.39 , Issue.1 , pp. 743-750
    • Yang, Y.S.1    Huang, W.2
  • 28
    • 0035803614 scopus 로고    scopus 로고
    • The predictive model for machinability of 304 stainless steel
    • Chien WT, Chou CY. The predictive model for machinability of 304 stainless steel. J Mater Process Technol 2001;118:442-7.
    • (2001) J Mater Process Technol , vol.118 , pp. 442-447
    • Chien, W.T.1    Chou, C.Y.2
  • 29
    • 38349091129 scopus 로고    scopus 로고
    • Multi-objective optimization for turning processes using neural network modeling and dynamic-neighborhood particle swarm optimization
    • Karpat Y, Özel T. Multi-objective optimization for turning processes using neural network modeling and dynamic-neighborhood particle swarm optimization. IntJAdv Manuf Technol 2007;35(3-4):234-47.
    • (2007) IntJAdv Manuf Technol , vol.35 , Issue.3-4 , pp. 234-247
    • Karpat, Y.1    Özel, T.2
  • 30
    • 50849135518 scopus 로고    scopus 로고
    • A comparative study of the ANN and RSM modeling approaches for predicting burr size in drilling
    • Karnik SR, Gaitonde VN, Davim JP. A comparative study of the ANN and RSM modeling approaches for predicting burr size in drilling. Int J Adv Manuf Technol 2008;38(9-10):868-83.
    • (2008) Int J Adv Manuf Technol , vol.38 , Issue.9-10 , pp. 868-883
    • Karnik, S.R.1    Gaitonde, V.N.2    Davim, J.P.3
  • 31
    • 0035332143 scopus 로고    scopus 로고
    • Tool wear and machinability of HIPed P/M and conventional cast duplex stainless steels
    • Paro J, Hänninen H, Kauppinen V. Tool wear and machinability of HIPed P/M and conventional cast duplex stainless steels. Wear 2001;249(3-4):279-84.
    • (2001) Wear , vol.249 , Issue.3-4 , pp. 279-284
    • Paro, J.1    Hänninen, H.2    Kauppinen, V.3
  • 33
    • 84870170920 scopus 로고    scopus 로고
    • Predicting the surface roughness in the dry machining of duplex stainless steel (DSS)
    • Królczyk G, Legutko S, Gajek M. Predicting the surface roughness in the dry machining of duplex stainless steel (DSS). Metalurgija 2013;52(2):259-62.
    • (2013) Metalurgija , vol.52 , Issue.2 , pp. 259-262
    • Królczyk, G.1    Legutko, S.2    Gajek, M.3
  • 34
    • 84883193370 scopus 로고    scopus 로고
    • Effect of the cutting parameters on tool life in duplex stainless steel turning process
    • Królczyk G, Gajek M, Legutko S. Effect of the cutting parameters on tool life in duplex stainless steel turning process. Tehnicki vjesnik 2013;20(4):587-92.
    • (2013) Tehnicki Vjesnik , vol.20 , Issue.4 , pp. 587-592
    • Królczyk, G.1    Gajek, M.2    Legutko, S.3
  • 35
    • 84872443771 scopus 로고    scopus 로고
    • Predicting the tool life in the dry machining of duplex stainless steel
    • Królczyk G, Gajek M, Legutko S. Predicting the tool life in the dry machining of duplex stainless steel. Maint Reliab 2013;15(1):62-5.
    • (2013) Maint Reliab , vol.15 , Issue.1 , pp. 62-65
    • Królczyk, G.1    Gajek, M.2    Legutko, S.3
  • 36
    • 84878153171 scopus 로고    scopus 로고
    • Machinability study of first generation duplex (2205), second generation duplex (2507) and austenite stainless steel during drilling process
    • Nomani J, Pramanik A, Hilditch T, Littlefair G. Machinability study of first generation duplex (2205), second generation duplex (2507) and austenite stainless steel during drilling process. Wear 2013;304(1-2):20-8.
    • (2013) Wear , vol.304 , Issue.1-2 , pp. 20-28
    • Nomani, J.1    Pramanik, A.2    Hilditch, T.3    Littlefair, G.4
  • 37
    • 85034964637 scopus 로고    scopus 로고
    • Correlating tool wear, surface roughness and corrosion resistance in the turning process of super duplex stainless steel
    • de Oliveira Jr CA, Diniz AE, Bertazzoli R. Correlating tool wear, surface roughness and corrosion resistance in the turning process of super duplex stainless steel. J BrazSoc Mech Sci Eng 2013, http://dx.doi.org/10.1007/s11665-013-0832-4.
    • (2013) J BrazSoc Mech Sci Eng
    • De Oliveira, C.A.1    Diniz, A.E.2    Bertazzoli, R.3
  • 38
    • 84891394338 scopus 로고    scopus 로고
    • Optimization of surface roughness, cutting force and tool wear of nitrogen alloyed duplex stainless steel in a dry turning process using Taguchi method
    • Selvaraj DP, Chandramohanb P, Mohanraj M. Optimization of surface roughness, cutting force and tool wear of nitrogen alloyed duplex stainless steel in a dry turning process using Taguchi method. Measurement 2014;49:205-15.
    • (2014) Measurement , vol.49 , pp. 205-215
    • Selvaraj, D.P.1    Chandramohanb, P.2    Mohanraj, M.3
  • 39
    • 84894878632 scopus 로고    scopus 로고
    • Microhardness and surface integrity in turning process of duplex stainless steel (DSS) for different cutting conditions
    • Królczyk G, Nieslony P, Legutko S. Microhardness and surface integrity in turning process of duplex stainless steel (DSS) for different cutting conditions. J Mater Eng Perform 2014;23(3):859-66.
    • (2014) J Mater Eng Perform , vol.23 , Issue.3 , pp. 859-866
    • Królczyk, G.1    Nieslony, P.2    Legutko, S.3
  • 40
    • 40849094260 scopus 로고    scopus 로고
    • A comprehensive tool-wear/tool-life performance model in the evaluation of NDM (near dry machining) for sustainable manufacturing
    • Marksberry PW, Jawahir IS. A comprehensive tool-wear/tool-life performance model in the evaluation of NDM (near dry machining) for sustainable manufacturing. Int J Mach Tool Manuf 2008;48(7-8):878-86.
    • (2008) Int J Mach Tool Manuf , vol.48 , Issue.7-8 , pp. 878-886
    • Marksberry, P.W.1    Jawahir, I.S.2
  • 41
    • 77953649601 scopus 로고    scopus 로고
    • Sustainable manufacturing: Modeling and optimization challenges at the product, process and system levels
    • Jayal AD, Badurdeen F, Dillon OW, Jawahir IS. Sustainable manufacturing: modeling and optimization challenges at the product, process and system levels. CIRP J Manuf Sci Technol 2010;2(3):144-52.
    • (2010) CIRP J Manuf Sci Technol , vol.2 , Issue.3 , pp. 144-152
    • Jayal, A.D.1    Badurdeen, F.2    Dillon, O.W.3    Jawahir, I.S.4
  • 43
    • 84861814514 scopus 로고    scopus 로고
    • Optimization of cutting conditions for sustainable machining of PEEK-CF30 using TiN tools
    • Hanafi I, Khamlichi A, Cabrera FM, Almansa E, Jabbouri A. Optimization of cutting conditions for sustainable machining of PEEK-CF30 using TiN tools. J Clean Prod 2012;33:1-9.
    • (2012) J Clean Prod , vol.33 , pp. 1-9
    • Hanafi, I.1    Khamlichi, A.2    Cabrera, F.M.3    Almansa, E.4    Jabbouri, A.5
  • 44
    • 85026913177 scopus 로고    scopus 로고
    • Prognose des prozessabhängigen Energieverbrauchs Simulations- and Prognosemodell des prozessabhängigen Energieverbrauchs von Werkzeugm-aschinen - Teil 1
    • Heisel U, Braun S. Prognose des prozessabhängigen Energieverbrauchs Simulations- and Prognosemodell des prozessabhängigen Energieverbrauchs von Werkzeugm-aschinen - Teil 1. Werkstattstechnik Online 2013;103(1):16-21.
    • (2013) Werkstattstechnik Online , vol.103 , Issue.1 , pp. 16-21
    • Heisel, U.1    Braun, S.2
  • 49
    • 80053567233 scopus 로고    scopus 로고
    • Cuckoo optimization algorithm
    • Rajabioun R. Cuckoo optimization algorithm. Appl Soft Comput 2011;11(8):5508-18.
    • (2011) Appl Soft Comput , vol.11 , Issue.8 , pp. 5508-5518
    • Rajabioun, R.1
  • 53
    • 84922775690 scopus 로고    scopus 로고
    • Evaluation of metal strip-layout selectionusing AHP and TOPSIS method
    • Chittaranjan D, Srinivas C. Evaluation of metal strip-layout selectionusing AHP and TOPSIS method. Adv Mater Manuf Charact 2013;3(1):425-9.
    • (2013) Adv Mater Manuf Charact , vol.3 , Issue.1 , pp. 425-429
    • Chittaranjan, D.1    Srinivas, C.2
  • 58
    • 84875708493 scopus 로고    scopus 로고
    • Multiobjective cuckoo search for design optimization
    • Yang XS, Deb S. Multiobjective cuckoo search for design optimization. Comput OperRes 2013;40(6):1616-24.
    • (2013) Comput OperRes , vol.40 , Issue.6 , pp. 1616-1624
    • Yang, X.S.1    Deb, S.2


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.