Influence of nanoclay particles modification by polyester-amide hyperbranched polymer on the corrosion protective performance of the epoxy nanocomposite

Corrosion Science

Volumn 92, Issue , 2015, Pages 162-172

  Ganjaee Sari, M ^a   Ramezanzadeh, B ^a   Shahbazi, M ^a   Pakdel, A S ^a  

^a INSTITUTE FOR COLOR SCIENCE AND TECHNOLOGY   (Iran)

Author keywords

A. Polymer; A. Steel; B. EIS; B. X ray diffraction

Indexed keywords

AMIDES; CORROSION RESISTANCE; DENDRIMERS; ELECTROCHEMICAL CORROSION; ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY; EPOXY RESINS; GRAVIMETRIC ANALYSIS; NANOCOMPOSITES; POLYESTERS; THERMOGRAVIMETRIC ANALYSIS; X RAY POWDER DIFFRACTION;

B. EIS; EPOXY NANOCOMPOSITES; EPOXY/CLAY NANOCOMPOSITES; HYPERBRANCHED POLYMERS; NANOCLAY PARTICLES; POLYESTERAMIDES; PROTECTIVE PERFORMANCE; THERMAL GRAVIMETRIC ANALYSIS;

CORROSION RESISTANT COATINGS;

EID: 84921436738     PISSN: 0010938X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.corsci.2014.11.047     Document Type: Article

References (93)

1. Finšgar M., Jackson J. Application of corrosion inhibitors for steels in acidic media for the oil and gas industry: a review. Corros. Sci. 2014, 86:17-41.
2. Mourya P., Banerjee S., Singh M.M. Corrosion inhibition of mild steel in acidic solution by Tagetes erecta (Marigold flower) extract as a green inhibitor. Corros. Sci. 2014, 85:352-363.
3. Mert B.D., Yüce A.O., Kardaş G., Yazici B. Inhibition effect of 2-amino-4-methylpyridine on mild steel corrosion: experimental and theoretical investigation. Corros. Sci. 2014, 85:287-295.
4. Valdez B., Kiyota S., Stoytcheva M., Zlatev R., Bastidas J.M. Cerium-based conversion coatings to improve the corrosion resistance of aluminium alloy 6061-T6. Corros. Sci. 2014, 87:141-149.
5. Zeng Rong.-Chang., Zhang Fen., Lan Zi.-Dong., Cui Hong.-Zhi., Han En.-Hou. Corrosion resistance of calcium-modified zinc phosphate conversion coatings on magnesium-aluminium alloys. Corros. Sci. 2014, 88:452-459.
6. Pour-Ali S., Dehghanian C., Kosari A. In situ synthesis of polyaniline-camphorsulfonate particles in an epoxy matrix for corrosion protection of mild steel in NaCl solution. Corros. Sci. 2014, 85:204-214.
7. Tian W., Liu L., Meng F., Liu Y., Li Y., Wang F. The failure behaviour of an epoxy glass flake coating/steel system under marine alternating hydrostatic pressure. Corros. Sci. 2014, 86:81-92.
8. Rostami M., Rasouli S., Ramezanzadeh B., Askari A. Electrochemical investigation of the properties of Co doped ZnO nanoparticle as a corrosion inhibitive pigment for modifying corrosion resistance of the epoxy coating. Corros. Sci. 2014, 88:387-399.
9. Behzadnasab M., Mirabedini S.M., Esfandeh M. Corrosion protection of steel by epoxy nanocomposite coatings containing various combinations of clay and nanoparticulate zirconia. Corros. Sci. 2013, 75:134-141.
10. Kartsonakis I.A., Athanasopoulou E., Snihirova D., Martins B., Koklioti M.A., Montemor M.F., Kordas G., Charitidis C.A. Multifunctional epoxy coatings combining a mixture of traps and inhibitor loaded nanocontainers for corrosion protection of AA2024-T3. Corros. Sci. 2014, 85:147-159.
11. Sababi M., Pan J., Augustsson P.-E., Sundell P.-E., Claesson P.M. Influence of polyaniline and ceria nanoparticle additives on corrosion protection of a UV-cure coating on carbon steel. Corros. Sci. 2014, 84:189-197.
12. Wang W., Xu L., Li X., Yang Y., An E. Self-healing properties of protective coatings containing isophorone diisocyanate microcapsules on carbon steel surfaces. Corros. Sci. 2014, 80:528-535.
13. Arman S.Y., Ramezanzadeh B., Farghadani S., Mehdipour M., Rajabi A. Application of the electrochemical noise to investigate the corrosion resistance of an epoxy zinc-rich coating loaded with lamellar aluminum and micaceous iron oxide particles. Corros. Sci. 2013, 77:118-127.
14. Schaefer K., Miszczyk A. Improvement of electrochemical action of zinc-rich paints by addition of nanoparticulate zinc. Corros. Sci. 2013, 66:380-391.
15. Salgin B., Özkanat Ö., Mol J.M.C., Terryn H., Rohwerder M. Role of surface oxide properties on the aluminum/epoxy interfacial bonding. J. Phys. Chem. C 2013, 117:4480-4487.
16. Kartsonakis I.A., Athanasopoulou E., Snihirova D., Martins B., Koklioti M.A., Montemor M.F., Kordas G., Charitidis C.A. Multifunctional epoxy coatings combining a mixture of traps and inhibitor loaded nanocontainers for corrosion protection of AA2024-T3. Corros. Sci. 2014, 85:147-159.
17. Gergely A., Pászti Z., Bertóti I., Török T., Mihály J., Kálmán E. Novel zinc-rich epoxy paint coatings with hydrated alumina and carbon nanotubes supported polypyrrole for corrosion protection of low carbon steel: Part II: Corrosion prevention behavior of the hybrid paint coatings. Mater. Corros. 2013, 64:1091-1103.
18. Moazeni N., Mohamad Z., Faisal N.L.I., Tehrani M.A., Dehbari N. Anticorrosion epoxy coating enriched with hybrid nanozinc dust and halloysite nanotubes. J. Appl. Polym. Sci. 2013, 130:955-960.
19. Cho D., Hwang J.H. Elastomeric coating of exfoliated graphite nanoplatelets with amine-terminated poly(butadiene-co-acrylonitrile): characterization and its epoxy toughening effect. Adv. Polym. Technol. 2013, 32:21366.
20. Kanehashi S., Yokoyama K., Masuda R., Kidesaki T., Nagai K., Miyakoshi T. Preparation and characterization of cardanol-based epoxy resin for coating at room temperature curing. J. Appl. Polym. Sci. 2013, 130:2468-2478.
21. Kozako M., Nakatsu H., Toda H., Yamada S., Yoshinaga K., Hikita M., Hirata D., Miyamoto T., Takei M. Basic investigation of epoxy resin coatings with dispersed carbon nanotubes. Electron. Commun. Jpn. 2014, 97:24-32.
22. Gergely A., Pászti Z., Bertóti I., Török T., Pfeifer É., Kálmán E. Novel zinc-rich epoxy paint coatings with hydrated alumina and carbon nanotubes supported polypyrrole for corrosion protection of low carbon steel: Part I: Inhibitor particles and their dispersions. Mater. Corros. 2013, 64:1082-1090.
23. 3 nanoparticles. Macromol. Mater. Eng. 2013, 298:1184-1189.
24. Qu H., Wu W., Hao J., Wang C., Xu J. Inorganic-organic hybrid coating-encapsulated ammonium polyphosphate and its flame retardancy and water resistance in epoxy resin. Fire Mater. 2014, 38:312-322.
25. Prabu A.A., Alagar M. Mechanical and thermal studies of intercross-linked networks based on siliconized polyurethane-epoxy/unsaturated polyester coatings. Prog. Org. Coat. 2004, 49:236-243.
26. Banna M.H., Shirokoff J., Molgaard J. Effects of two aqueous acidic solutions on polyester and bisphenol A epoxy vinyl ester resins. Mater. Sci. Eng. A Struct. 2011, 528:2137-2142.
27. Mafi R., Mirabedini S.M., Naderi R., Attar M.M. Effect of curing characterization on the corrosion performance of polyester and polyester/epoxy powder coatings. Corros. Sci. 2008, 50:3280-3286.
28. Barletta M., Bellisario D. Manufacture and characterization of free-standing epoxy-polyester films. Prog. Org. Coat. 2011, 70:259-272.
29. Chen H., Su C., Huang T., Li T. Investigation of the relationship between morphology and tribological properties of an epoxy resin based on tetraglycidyl 4,4'-diaminodiphenylmethane modified with polyetherimide oligomers. J. Appl. Polym. Sci. 2014, 131:39863.
30. Moosburger-Will J., Jäger J., Horn S., Wellhausen C. Investigation of phase morphology of polyetherimide-toughened epoxy resin by scanning probe microscopy. Polym. Test 2012, 31:1008-1018.
31. Hourston D.J., Lane J.M. The toughening of epoxy resins with thermoplastics: 1. Trifunctional epoxy resin-polyetherimide blends. Polymer 1992, 33:1379-1383.
32. Bucknall C.B., Gilbert A.H. Toughening tetrafunctional epoxy resins using polyetherimide. Polymer 1989, 30:213-217.
33. Yu Y., Zhang Z., Gan W., Wang M., Li S. Effect of polyethersulfone on the mechanical and rheological properties of polyetherimide-modified epoxy systems. Ind. Eng. Chem. Res. 2003, 42:3250-3256.
34. Lin J., Wu X., Zheng C., Zhang P., Huang B., Guo N., Jin L.Y. Synthesis and properties of epoxy-polyurethane/silica nanocomposites by a novel sol method and in-situ solution polymerization route. Appl. Surf. Sci. 2014, 303:67-75.
35. Wu G., Kong Z., Chen J., Huo S., Liu G. Preparation and properties of waterborne polyurethane/epoxy resin composite coating from anionic terpene-based polyol dispersion. Prog. Org. Coat. 2014, 77:315-321.
36. Yan L., Chouw N., Jayaraman K. Effect of triggering and polyurethane foam-filler on axial crushing of natural flax/epoxy composite tubes. Mater. Des. 2014, 56:528-541.
37. Xia S., Liu Y., Zhang L., Wang D., Zou W., Peng J., Cao S. Tribological mechanism improving the wear resistance of polyurethane/epoxy interpenetrating polymer network via nanodiamond hybridization. J. Appl. Polym. Sci. 2014, 131:40244.
38. B. Tang, X. Liu, X. Zhao, J. Zhang, Highly efficient in situ toughening of epoxy thermosets with reactive hyperbranched polyurethane, J. Appl. Polym. Sci 131, 40614.
39. Fei G., Zhu K., Wang H., Shen Y., Zou J., Lan J. Morphology, dynamic rheology, and cohesive properties of epoxy-modified polyurethane-acrylate microemulsions prepared by in situ surfactant-free polymerization. J. Appl. Polym. Sci. 2014, 131:39886.
40. Chen S., Tian Y., Chen L., Hu T. Epoxy resin/polyurethane hybrid networks synthesized by frontal polymerization. Chem. Mater. 2006, 18:2159-2163.
41. Sprenger S. Epoxy resins modified with elastomers and surface-modified silica nanoparticles. Polymer 2013, 54:4790-4797.
42. Kaynak C., Arikan A., Tincer T. Flexibility improvement of short glass fiber reinforced epoxy by using a liquid elastomer. Polymer 2003, 44:2433-2439.
43. Egan D.R., Drake R.S. Formulating elastomer modified epoxy resins for ambient temperature cured construction applications. Constr. Build. Mater. 1989, 3:208-212.
44. Balakrishnan S., Start P.R., Raghavan D., Hudson S.D. The influence of clay and elastomer concentration on the morphology and fracture energy of preformed acrylic rubber dispersed clay filled epoxy nanocomposites. Polymer 2005, 46:11255-11262.
45. Thomas R., Durix S., Sinturel C., Omonov T., Goossens S., Groeninckx G., Moldenaers P., Thomas S. Cure kinetics, morphology and miscibility of modified DGEBA-based epoxy resin - effects of a liquid rubber inclusion. Polymer 2007, 48:1695-1710.
46. Murias P., Maciejewski H., Galina H. Epoxy resins modified with reactive low molecular weight siloxanes. Eur. Polym. J. 2012, 48:769-773.
47. Canosa G., Alfieri P.V., Giudice C.A. High-solids, one-coat paints based on aliphatic epoxy resin-siloxanes for steel protection. Prog. Org. Coat. 2014, 77:1459-1464.
48. Díaz I., Chico B., de la Fuente D., Simancas J., Vega J.M., Morcillo M. Corrosion resistance of new epoxy-siloxane hybrid coatings. A laboratory study. Prog. Org. Coat. 2010, 69:278-286.
49. Yeh J., Huang H., Chen C., Su W., Yu Y. Siloxane-modified epoxy resin-clay nanocomposite coatings with advanced anticorrosive properties prepared by a solution dispersion approach. Surf. Coat. Tech. 2006, 200:2753-2763.
50. Qian M., Soutar A.M., Tan X.H., Zeng X.T., Wijesinghe S.L. Two-part epoxy-siloxane hybrid corrosion protection coatings for carbon steel. Thin Sold Films 2009, 517:5237-5242.
51. Piscitelli F., Lavorgna M., Buonocore G.G., Verdolotti L., Galy J., Mascia L. Plasticizing and reinforcing features of siloxane domains in amine-cured epoxy/silica hybrids. Macromol. Mater. Eng. 2013, 298:896-909.
52. Tomić M.D., Dunjić B., Likić V., Bajat J., Rogan J., Djonlagić J. The use of nanoclay in preparation of epoxy anticorrosive coatings. Prog. Org. Coat. 2014, 77:518-527.
53. Singh-Beemat J., Iroh J.O. Characterization of corrosion resistant clay/epoxy ester composite coatings and thin films. Prog. Org. Coat. 2012, 74:173-180.
54. Khan S.U., Munir A., Hussain R., Kim J. Fatigue damage behaviors of carbon fiber-reinforced epoxy composites containing. Compos. Sci. Technol. 2010, 70:2077-2085.
55. Allie L., Thorn J., Aglan H. Evaluation of nanosilicate filled poly (vinyl chloride-co-vinyl acetate) and epoxy coatings. Corros. Sci. 2008, 50:2189-2196.
56. Wang L., Shui X., Zheng X., You J., Li Y. Investigations on the morphologies and properties of epoxy/acrylic rubber/nanoclay nanocomposites for adhesive films. Compos. Sci. Technol. 2014, 93:46-53.
57. +-MMT and Cloisite 30B. Prog. Org. Coat. 2012, 74:589-595.
58. Malucelli G., Di Gianni A., Deflorian F., Fedel M., Bongiovanni R. Preparation of ultraviolet-cured nanocomposite coatings for protecting against corrosion of metal substrates. Corros. Sci. 2009, 51:1762-1771.
59. Bagherzadeh M.R., Mahdavi F. Preparation of epoxy-clay nanocomposite and investigation on its anti-corrosive behavior in epoxy coating. Prog. Org. Coat. 2007, 60:117-120.
60. Park J.H., Jana S.C. Mechanism of exfoliation of nanoclay particles in epoxy-clay nanocomposites. Macromolecules 2003, 36:2758-2768.
61. Park J., Jana S.C. Effect of Plasticization of Epoxy Networks by Organic Modifier on Exfoliation of Nanoclay. Macromolecules 2003, 36:8391-8397.
62. Yao H., You Z., Li L., Shi X., Goh S.W., Mills-Beale J., Wingard D. Performance of asphalt binder blended with non-modified and polymer-modified nanoclay. Constr. Build. Mater. 2012, 35:159-170.
63. Oliveira G.C., Moccelini S.K., Castilho M., Terezo A.J., Possavatz J., Magalhães M.R.L., Dores E.F.G.C. Biosensor based on atemoya peroxidase immobilised on modified nanoclay for glyphosate biomonitoring. Talanta 2012, 98:130-136.
64. Yang Y., Chen J., Yuan Q., Misra R.D.K. Structure-property relationship in impact modified nanoclay-reinforced polypropylene. Mater. Sci. Eng. A Struct. 2011, 528:1857-1863.
65. Afzali D., Mostafavi A., Mirzaei M. Preconcentration of gold ions from water samples by modified organo-nanoclay sorbent prior to flame atomic absorption spectrometry determination. J. Hazard. Mater. 2010, 181:957-961.
66. Solyman S.M., Azzam E.M.S., Sayyah S.M. The performance of modified nanoclay using polymeric thiol surfactants assembled on gold nanoparticles in heterogeneous bulk polymerization of methyl methacrylate. Appl. Catal. A Gen. 2014, 475:218-225.
67. Samberan M.F., Hasani-Sadrabadi M.M., Ghaffarian S.R., Alimadadi A. Investigation of the effects of AMPS-modified nanoclay on fuel cell performance of sulfonated aromatic proton exchange membranes. Int. J. Hydrogen Energy 2013, 38:14076-14084.
68. Jin M., Zhong Q. Structure modification of montmorillonite nanoclay by surface coating with soy protein. J. Agric. Food Chem. 2012, 60:11965-11971.
69. B. Geyer, S. Röhner, G. Lorenz, A. Kandelbauer, Improved thermostability and interfacial matching of nanoclay filler and ethylene vinyl alcohol matrix by silane-modification, J. Appl. Polym. Sci., doi: doi:10.1002/app.41227.
70. Park J., Jana S.C. Adverse effects of thermal dissociation of alkyl ammonium ions on nanoclay exfoliation in epoxy-clay systems. Polymer 2004, 45:7673-7679.
71. Meera K.M.S., Sankar R.M., Murali A., Jaisankar S.N., Mandal A.B. Sol-gel network silica/modified montmorillonite clay hybrid nanocomposites for hydrophobic surface coatings. Colloid Surface B 2012, 90:204-210.
72. Plummer C.J.G., Rodlert M., Bucaille J., Grünbauer H.J.M., Månson J.E. Correlating the rheological and mechanical response of polyurethane nanocomposites containing hyperbranched polymers. Polymer 2005, 46:6543-6553.
73. Plummer C.J.G., Garamszegi L., Leterrier Y., Rodlert M., Månson J.E. Hyperbranched polymer layered silicate nanocomposites. Chem. Mater. 2002, 14:486-488.
74. Rodlert M., Plummer C.J.G., Garamszegi L., Leterrier Y., Grünbauer H.J.M., Månson J.E. Hyperbranched polymer/montmorillonite clay nanocomposites. Polymer 2004, 45:949-960.
75. Larraza I., Peinado C., Abrusci C., Catalina F., Corrales T. Hyperbranched polymers as clay surface modifiers for UV-cured nanocomposites with antimicrobial activity. J. Photoch. Photobio. A 2011, 224:46-54.
76. Decker J.J., Chvalun S.N., Nazarenko S. Intercalation behavior of hydroxylated dendritic polyesters in polymer clay nanocomposites prepared from aqueous solution. Polymer 2011, 52:3943-3955.
77. Siao Y., Shau S., Hu S., Lee R., Lin C., Wu J., Jeng R. Nonlinear optical hyperbranched polyaspartimide/montmorillonite nanocomposites based on reactive fluorine- or phosphorous-containing organoclays. Polymer 2013, 54:3850-3859.
78. Mo Z., Niu G., Chen H., Wu Y. Synthesis and characterization of hyperbranched poly(amine-ester)/lanthanum/montmorillonite nanocomposites. Mater. Lett. 2008, 62:1743-1746.
79. Liyanage A.U., Ikhuoria E.U., Adenuga A.A., Remcho V.T., Lerner M.M. Synthesis and characterization of low-generation polyamidoamine (PAMAM) dendrimer-sodium montmorillonite (Na-MMT) clay nanocomposites. Inorg. Chem. 2013, 52:4603-4610.
80. Deka H., Karak N. Bio-based hyperbranched polyurethane/clay nanocomposites: adhesive, mechanical, and thermal properties. Polym. Adv. Technol. 2011, 22:973-980.
81. Maji P.K., Guchhait P.K., Bhowmick A.K. Effect of the microstructure of a hyperbranched polymer and nanoclay loading on the morphology and properties of novel polyurethane nanocomposites. ACS Appl. Mater. Interface 2009, 1:289-300.
82. Fogelström L., Malmström E., Johansson M., Hult A. Hard and flexible nanocomposite coatings using nanoclay-filled hyperbranched polymers. ACS Appl. Mater. Interface 2010, 2:1679-1684.
83. Deka H., Karak N. Influence of highly branched poly(amido amine) on the properties of hyperbranched polyurethane/clay nanocomposites. Mater. Chem. Phys. 2010, 124:120-128.
84. Javadi A., Srithep Y., Pilla S., Clemons C.C., Gong S., Turng L. Microcellular poly(hydroxybutyrate-co-hydroxyvalerate)-hyperbranched polymer-nanoclay nanocomposites. Polym. Eng. Sci. 2011, 51:1815-1826.
85. Pilla S., Kramschuster A., Lee J., Clemons C., Gong S., Turng L. Microcellular processing of polylactide-hyperbranched polyester-nanoclay composites. J. Mater. Sci. 2010, 45:2732-2746.
86. Deka H., Karak N. Vegetable oil-based hyperbranched thermosetting polyurethane/clay nanocomposites. Nanoscale Res. Lett. 2009, 4:758-765.
87. Sharma S.K., Nayak S.K. Surface modified clay/polypropylene (PP) nanocomposites: effect on physico-mechanical, thermal and morphological properties. Polym. Degrad. Stabil. 2009, 94:132-138.
88. Hirschorn B., Orazem M.E., Tribollet B., Vivier V., Frateur I., Musiani M. Determination of effective capacitance and film thickness from constant-phase-element parameters. Electrochim. Acta 2010, 55:6218-6227.
89. Scully J.R. Electrochemical impedance of organic coated steel: correlation of impedance parameters with long-term coating deterioration. J. Electrochem. Soc. 1989, 136:979-989.
90. Potvin E., Brossard L., Larochelle G. Corrosion protective performances of commercial low-VOC epoxy/urethane coatings on hot-rolled 1010 mild steel. Prog. Org. Coat. 1997, 31:363-373.
91. Dong Y., Ma L., Zhou Q. Effect of the incorporation of montmorillonite-layered double hydroxide nanoclays on the corrosion protection of epoxy coatings. J. Coat. Technol. Res. 2013, 10(6):909-921.
92. Fernandez-Francos X., Maria Salla J., Cadenato A., Maria Morancho J., Serra A., Mantecon A., Ramis X. A new strategy for controlling shrinkage of DGEBA resins cured by cationic copolymerization with hydroxyl-terminated hyperbranched polymers and ytterbium triflate as an initiator. J. Appl. Polym. Sci. 2009, 111:2822-2829.
93. Huttunen-Saarivirta E., Vaganov G.V., Yudin V.E., Vuorinen J. Characterization and corrosion protection properties of epoxy powder coatings containing nanoclays. Prog. Org. Coat. 2013, 76:757-767.