Effect of polyethersulfone on the mechanical and rheological properties of polyetherimide-modified epoxy systems

Industrial and Engineering Chemistry Research

Volumn 42, Issue 14, 2003, Pages 3250-3256

  Yu, Yingfeng ^a   Zhang, Zhicheng ^a   Gan, Wenjun ^a   Wang, Minghai ^a   Li, Shanjun ^a  

^a FUDAN UNIVERSITY   (China)

Author keywords

[No Author keywords available]

Indexed keywords

DYNAMIC MECHANICAL ANALYSIS; HEAT RESISTANCE; MORPHOLOGY; PHASE SEPARATION; POLYMER BLENDS; RHEOLOGY; TERNARY SYSTEMS; TRANSMISSION ELECTRON MICROSCOPY; VISCOSITY;

RHEOMETRY;

POLYETHERS;

EPOXY RESIN; IMIDE; POLYETHERIMIDE; POLYETHERSULFONE; UNCLASSIFIED DRUG;

EPOXY PAINT SYSTEM; MECHANICAL PROPERTY; POLYMER; PROCESSING TECHNIQUE; RHEOLOGY; SEPARATION CHARACTERISTICS;

ARTICLE; DIFFERENTIAL SCANNING CALORIMETRY; FLOW KINETICS; FLOW MEASUREMENT; HEAT TOLERANCE; MOLECULAR WEIGHT; PHASE SEPARATION; TRANSMISSION ELECTRON MICROSCOPY; VISCOSITY;

EID: 0037999910     PISSN: 08885885     EISSN: None     Source Type: Journal    
DOI: 10.1021/ie0210309     Document Type: Article

References (31)

1. Bucknall, C. B.; Gomez, C. M.; Quintard, I. Phase-separation from solutions of poly(ether sulfone) in epoxy-resins. Polymer 1994, 35, 353.
2. Chen, Y. S.; Lee, J. S.; Yu, T. L.; Chen, J. C.; Chen, W. Y.; Cheng, M. C. The curing reaction of poly(ether-sulfone)-modified epoxy-resin. Macromol. Chem. Phys. 1995, 196, 3447.
3. Min, B. G.; Hodgkin, J. H.; Stachurski, Z. H. Microstructural effects and the toughening thermoplastic modified epoxy-resins. J. Appl. Polym. Sci. 1993, 50, 1065.
4. Bennett, G. S.; Farris, R. J.; Thompson, S. A. Amine-terminated poly(aryl ether ketone)-epoxy amine resin systems as tough high-performance materials. Polymer 1991, 32, 1633.
5. Riccardi, C. C.; Borrajo, J.; Williams, R. J. J.; GirardReydet, E.; Sautereau, H.; Pascault, J. P. Thermodynamic analysis of the phase separation in polyetherimide-modified epoxies. J. Polym. Sci., Part B: Polym. Phys. 1996, 34, 349.
6. Bonnet, A.; Pascault, J. P.; Sautereau, H.; Taha, M.; Camberlin, Y. Epoxy-diamine thermoset/thermoplastic blends. 1. Rates of reactions before and after phase separation. Macromolecules 1999, 32, 8517.
7. Yu, Y. F.; Cui, J.; Chen, W. J.; Li, S. J. Studies on the phase separation of polyetherimide modified tetrafunctional epoxy resin. II. Effects of the molecular weight. J. Macromol. Sci. Chem. 1998, A35, 121. Cui, J.; Yu, Y. F.; Li, S. J. Studies on the phase separation of polyetherimide modified tetrafunctional epoxy resin. III. Morphology development of the blend during curing. J. Macromol. Sci. Chem. 1998, A35, 649.
8. Yu, Y. F.; Cui, J.; Chen, W. J.; Li, S. J. Studies on the phase separation of polyetherimide modified tetrafunctional epoxy resin. II. Effects of the molecular weight. J. Macromol. Sci. Chem. 1998, A35, 121. Cui, J.; Yu, Y. F.; Li, S. J. Studies on the phase separation of polyetherimide modified tetrafunctional epoxy resin. III. Morphology development of the blend during curing. J. Macromol. Sci. Chem. 1998, A35, 649.
9. Cui, J.; Yu, Y. F.; Chen, W. J.; Li, S. J. Studies on the phase separation of polyetherimide-modified epoxy resin. 2. Effect of molecular weight of PEI on the structure formation. Macromol. Chem. Phys. 1997, 198, 3267. Cui, J.; Yu, Y. F.; Li, S. J. Studies on the phase separation of polyetherimide-modified epoxy resin, 3-Part 1-Morphology development of the blend during curing. Macromol. Chem. Phys. 1998, 199, 1645.
10. Cui, J.; Yu, Y. F.; Chen, W. J.; Li, S. J. Studies on the phase separation of polyetherimide-modified epoxy resin. 2. Effect of molecular weight of PEI on the structure formation. Macromol. Chem. Phys. 1997, 198, 3267. Cui, J.; Yu, Y. F.; Li, S. J. Studies on the phase separation of polyetherimide-modified epoxy resin, 3-Part 1-Morphology development of the blend during curing. Macromol. Chem. Phys. 1998, 199, 1645.
11. Zhang, Z. C.; Cui, J.; Li, S. J.; Sun, K.; Fan, W. Z. Effect of hydroxyl-terminated polyethersulfone on the phase separation of polyetherimide-modified epoxy resin. Macromol. Chem. Phys. 2001, 202, 126.
12. Wu, X. G.; Cui, J.; Ding, Y. F.; Li, S. J.; Dong, B. Z.; Wang, J. Studies on the phase separation of poly(ether imide)-modified epoxy resin, 5-Phase separation behavior of a quasi-binary system. Macromol. Rapid Commun. 2001, 22, 409.
13. GirardReydet, E.; Vicard, V.; Pascault, J. P.; Sautereau, H. Polyetherimide-modified epoxy networks: Influence of cure conditions on morphology and mechanical properties. J. Appl. Polym. Sci. 1997, 65, 2433.
14. Su, C. C.; Woo, E. M. Cure kinetcs and morphology of amine-cured tetraglycidyl-4,4′-diaminodiphenylmethane epoxy blends with poly(ether imide). Polymer 1995, 36, 2883.
15. Cho, J. B.; Hwang, J. W.; Cho, K.; An, J. H.; Park, C. E. Effects of morphology on toughening of tetrafunctional epoxyresins with poly(ether imide). Polymer 1993, 34, 4832.
16. Yamanaka, K.; Inoue, T. Structure development in epoxy resin modified with poly(ether sulphone). Polymer 1989, 30, 662.
17. Inoue, T. Reaction-induced phase-decomposition in polymer blends. Prog. Polym. Sci. 1995, 20, 119.
18. Araki, T.; Tanaka, H. Three-dimensional numerical simulations of viscoelastic phase separation: Morphological characteristics. Macromolecules 2001, 34, 1953.
19. Tanaka, H.; Miura, T. Critical anomaly of complex shear modulus in polymer-solutions viscoelastic suppression of order-parameter fluctuation due to dynamic asymmetry. Phys. Rev. lett. 1993, 71, 2244.
20. Tanaka, H.; Araki, T. Phase inversion during viscoelastic phase separation: Roles of bulk and shear relaxation moduli. Phys. Rev. Lett. 1997, 78, 4966.
21. Toyoda, N.; Takenaka, M.; Hashimoto, T. Experimental studies of stress-diffusion coupling in semi-dilute polymer solutions. I. 'Viscoelastic length' and viscoelastic effects on early stage spinodal decomposition. Polymer 2001, 42, 9193.
22. Tanaka, H. Viscoelastic phase separation. J. Phys.: Condens. Matter 2000, 12, R207.
23. Kim, B. S.; Chiba, T.; Inoue, T. Morphology development via reaction-induced phase-separation in epoxy poly(ether sulfone) with functional end-groups. Polymer 1995, 36, 43.
24. Pascault, J. P.; Williams, R. J. J. Formulation and characterization of thermoset-thermoplastic blends. In Polymer Blends; Paul, D. R., Bucknall C. B., Eds.; John Wiley & Sons: New York, 2000.
25. Kim, S. T.; Kim, J. K.; Choe, C. R.; Hong, S. I. Multi-phase toughened epoxy with poly(ether sulphone) and carboxyl-terminated butadiene-acrylonitrile rubber. J. Mater. Sci. 1996, 31, 3523.
26. Bonnet, A.; Pascault, J. P.; Sautereau, H. Epoxy-diamine thermoset/thermoplastic blends. 2. Rheological behavior before and after phase separation. Macromolecules 1999, 32, 8524.
27. Kim, H.; Char, K. Effect of phase separation on rheological properties during the isothermal curing of epoxy toughened with thermoplastic polymer. Ind. Eng. Chem. Res. 2000, 39, 955.
28. Kyu, T.; Lee, J. H. Nucleation initiated spinodal decomposition in a polymerizing system. Phys. Rev. Lett. 1996, 76, 3746.
29. Guo, Q. P.; Qiu, L. W.; Ding, M. X.; Feng, Z. L. Tensile properties of blends of poly(ether sulfone) with a poly(ether imide). Eur. Polym. J. 1992, 28, 1045.
30. Galante, M. J.; Borrajo, J.; Williams, R. J. J.; GirardReydet, E.; Pascault, J. P. Double phase separation induced by polymerization in ternary blends of epoxies with polystyrene and poly(methyl methacrylate). Macromolecules 2001, 34, 2686.
31. Elicabe, G. E.; Larrondo, H. A.; Williams, R. J. J. Light scattering in the course of a polymerization-induced phase separation by a nucleation growth mechanism. Macromolecules 1998, 32, 8173.