Experimental studies on formation, spreading and drying of inkjet drop of colloidal suspensions

Colloids and Surfaces A: Physicochemical and Engineering Aspects

Volumn 468, Issue , 2015, Pages 234-245

  Yoo, Hansol ^a   Kim, Chongyoup ^a  

^a Korea University   (South Korea)

Author keywords

Contact line; Drying mechanism; Inkjet printing; Printed electronics; Suspension

Indexed keywords

CONTACT ANGLE; CRYSTALLINE MATERIALS; DROPS; DRYING; INK JET PRINTING; SUBSTRATES;

COLLOIDAL SUSPENSIONS; CONTACT LINES; DRYING CHARACTERISTICS; DRYING MECHANISM; DYNAMIC CHARACTERISTICS; PRINTED ELECTRONICS; SPREADING CHARACTERISTICS; WETTING CHARACTERISTICS;

SUSPENSIONS (FLUIDS);

ALDEHYDE; DYE; GLASS; HEPTANOL; INKJET; OCTANOL; POLYSTYRENE; UNCLASSIFIED DRUG;

ARTICLE; COLLOID; CONTACT ANGLE; DYNAMICS; ELECTRONICS; EXPERIMENTAL STUDY; IMAGING; POLYMERIZATION; PRIORITY JOURNAL;

EID: 84920901670     PISSN: 09277757     EISSN: 18734359     Source Type: Journal    
DOI: 10.1016/j.colsurfa.2014.12.032     Document Type: Article

References (65)

1. Fukuda K., Sekine T., Kumaki D., Tokito S. Profile control of inkjet printed silver electrodes and their application to organic transistors. ACS Appl. Mater. Interfaces 2013, 5:3916.
2. Nge T.T., Nogi M., Suganuma K. Electrical functionality of inkjet-printed silver nanoparticle conductive tracks on nanostructured paper compared with those on plastic substrates. J. Mater. Chem. C 2013, 1:5235.
3. Lee K.J., Jun B.H., Kim T.H., Joung J. Direct synthesis and inkjetting of silver nanocrystals toward printed electronics. Nanotechnology 2006, 17:2424.
4. Dimitrov D., Schreve K., de Beer N. Advances in three dimensional printing - state of the art and future perspectives. Rapid Prototyp. J. 2006, 12:136.
5. Ebert J., Özkol E., Zeichner A., Uibel K., Weiss Ö., Koops U., Telle R., Fischer H. Direct inkjet printing of dental prostheses made of zirconia. J. Dent. Res. 2009, 88:673.
6. de Hazan Y., Thänert M., Trunec M., Misak J. Robotic deposition of 3d nanocomposite and ceramic fiber architectures via UV curable colloidal inks. J. Eur. Ceram. Soc. 2012, 32:1187.
7. Derby B. Bioprinting: inkjet printing proteins and hybrid cell-containing materials and structures. J. Mater. Chem. 2008, 18:5717.
8. 2 photoelectrode for dye-sensitized solar cells. J. Electrochem. Soc. 2012, 159:B34.
9. Kim H.S., Kang J.S., Park J.S., Hahn H.T., Jung H.C., Joung J.W. Inkjet printed electronics for multifunctional composite structure. Compos. Sci. Technol. 2009, 69:1256.
10. Derby B. Inkjet printing of functional and structural materials: fluid property requirements, feature stability, and resolution. Annu. Rev. Mater. Res. 2010, 40:395.
11. Hoath S.D., Hutchings I.M., Martin G.D., Tuladhar T.R., Mackley M.R., Vadillo D.C. Links between ink rheology, drop-on-demand jet formation, and printability. J. Imaging Sci. Technol. 2009, 53:41208.
12. Hoath S.D., Harlen O.G., Hutchings I.M. Jetting behavior of polymer solutions in drop-on-demand inkjet printing. J. Rheol. 2012, 56:1109.
13. Yoo H., Kim C. Generation of inkjet droplet of non-Newtonian fluid. Rheol. Acta 2013, 52:313.
14. Mcllroy C., Harlen O.G., Morrison N.F. Modelling the jetting of dilute polymer solutions in drop-on-demand inkjet printing. J. Non-Newton Fluid 2013, 201:17.
15. Furbank R.J., Morris J.F. An experimental study of particle effects on drop formation. Phys. Fluids 2004, 16:1777.
16. Bonnoit C., Bertrand T., Clement E., Lindner A. Accelerated drop detachment in granular suspensions. Phys. Fluids 2012, 24:043304.
17. McIlroy C., Harlen O.G. Modelling capillary break-up of particulate suspensions. Phys. Fluids 2014, 26:033101.
18. Hoath S.D., Hsiao W.-K., Hutchings I.M., Tuladhar T.R. Jetted mixtures of particle suspensions and resins. Phys. Fluids 2014, 26:101701.
19. Worthington A.M. A Study of Splashes 1908, Green and Co., Longmans.
20. Yarin A.L. Drop impact dynamics: splashing, spreading, receding, bouncing. Annu. Rev. Fluid Mech. 2006, 38:159.
21. Schiaffino S., Sonin A.A. Molten droplet deposition and solidification at low Weber numbers. Phys. Fluids 1997, 9:3172.
22. Rioboo R., Marengo M., Tropea C. Time evolution of liquid drop impact onto solid, dry surfaces. Exp. Fluids 2002, 33:112.
23. Son Y., Kim C. Spreading of inkjet droplet of non-Newtonian fluid on solid surface with controlled contact angle at low Weber and Reynolds numbers. J. Non-Newton Fluid 2009, 162:78.
24. Jung S., Hoath S.D., Hutchings I.M. The role of viscoelasticity in drop impact and spreading for inkjet printing of polymer solution on a wettable surface. Microfluid. Nanofluid. 2013, 14:163.
25. Nicolas M. Spreading of a drop of neutrally buoyant suspension. J. Fluid Mech. 2005, 545:271.
26. Lee S.J., Huh H.K., Kwon D.H. Energy dissipation of graphene colloidal suspension droplets impacting on solid substrates. RSC Adv. 2014, 4:7216.
27. Espin L., Kumar S. Forced spreading of films and droplets of colloidal suspensions. J. Fluid Mech. 2014, 742:495.
28. Han J., Kim C. Spreading of a suspension drop on a horizontal surface. Langmuir 2012, 28:2680.
29. Cazabat A.-M., Guena G. Evaporation of macroscopic sessile droplets. Soft Matter. 2010, 6:2591.
30. Murisic N., Kondic L. On evaporation of sessile drops with moving contact lines. J. Fluid Mech. 2011, 679:219.
31. Deegan R.D., Bakajin O., Dupont T.F., Huber G., Nagel S.R., Witten T.A. Capillary flow as the cause of ring stains from dried liquid drops. Nature 1997, 389:827.
32. Hu H., Larson R.G. Analysis of the effects of marangoni stresses on the microflow in an evaporating sessile droplet. Langmuir 2005, 21:3972.
33. Espin L., Kumar S. Sagging of evaporating droplets of colloidal suspensions on inclined substrates. Langmuir 2014, 30:11966.
34. Picknett R.G., Bexon R. Evaporation of sessile or pendant drops in still air. J. Colloid Interface Sci. 1977, 61:336.
35. Bourgesmonnier C., Shanahan M.E.R. Influence of evaporation on contact-angle. Langmuir 1995, 11:2820.
36. Sodtke C., Ajaev V.S., Stephan P. Dynamics of volatile liquid droplets on heated surfaces: theory versus experiment. J. Fluid Mech. 2008, 610:343.
37. Lim T., Han S., Chung J., Chung J.T., Ko S., Grigoropoulos C.P. Experimental study on spreading and evaporation of inkjet printed pico-liter droplet on a heated substrate. Int. J. Heat Mass Transfer 2009, 52:431.
38. Rodriguez-Ruiz I., Hammadi Z., Grossier R., Gomez-Morales J., Veesler S. Monitoring picoliter sessile microdroplet dynamics shows that size does not matter. Langmuir 2013, 29:12628.
39. Stauber J.M., Wilson S.K., Duffy B.R., Sefiane K. On the lifetimes of evaporating droplets. J. Fluid Mech. 2014, 744:1.
40. Dash S., Garimella S.V. Droplet evaporation on heated hydrophobic and superhydrophobic surfaces. Phys. Rev. E 2014, 89:042402.
41. Sangani A.S., Lu C., Su K., Schwarz J.A. Capillary force on particles near a drop edge resting on a substrate and a criterion for contact line pinning. Phys. Rev. E 2009, 80:011603.
42. Kuang M., Wang J., Bao B., Li F., Wang L., Jiang L., Song Y. Inkjet printing patterned photonic crystal domes for wide viewing-angle displays by controlling the sliding three phase contact line. Adv. Opt. Mater. 2014, 2:34.
43. Gardiner D.J., Hsiao W.K., Morris S.M., Hands P.J.W., Wilkinson T.D., Hutchings I.M., Coles H.J. Printed photonic arrays from self-organized chiral nematic liquid crystals. Soft Matter. 2012, 8:9977.
44. Soltman D., Subramanian V. Inkjet-printed line morphologies and temperature control of the coffee ring effect. Langmuir 2008, 24:2224.
45. van Osch T.H.J., Perelaer J., de Laat A.W.M., Schubert U.S. Inkjet printing of narrow conductive tracks on untreated polymeric substrates. Adv. Mater. 2008, 20:343.
46. Zhang Z., Zhang X., Xin Z., Deng M., Wen Y., Song Y. Controlled inkjetting of a conductive pattern of silver nanoparticles based on the coffee-ring effect. Adv. Mater. 2013, 25:6714.
47. Larson R.G. Transport and deposition patterns in drying sessile droplets. AIChE J. 2014, 60:1538.
48. Lim J.A., Lee W.H., Lee H.S., Lee J.H., Park Y.D., Cho K. Self-organization of ink-jet-printed triisopropylsilylethynyl pentacene via evaporation-induced flows in a drying droplet. Adv. Funct. Mater. 2008, 18:229.
49. Park J., Moon J. Control of colloidal particle deposit patterns within picoliter droplets ejected by ink-jet printing. Langmuir 2006, 22:3506.
50. Lee D.J., Oh J.H. Shapes andmorphologies of inkjet-printed nanosilver dots on glass substrates. Surf. Interface Anal. 2010, 42:1261.
51. Perelaer J., Smith P.J., Hendriks C.E., van den Berg A.M.J., Schubert U.S. The preferential deposition of silica micro-particles at the boundary of inkjet printed droplets. Soft Matter. 2008, 4:1072.
52. Bhardwaj R., Fang X.H., Somasundaran P., Attinger D. Self-assembly of colloidal particles from evaporating droplets: role of DLVO interactions and proposition of a phase diagram. Langmuir 2010, 26:7833.
53. Yan Q., Gao L., Sharma V., Chiang Y.-M., Wong C.C. Particle and substrate charge effects on colloidal self-assembly in a sessile drop. Langmuir 2008, 24:11518.
54. Maki K.L., Kumar S. Fast evaporation of spreading droplets of colloidal suspensions. Langmuir 2011, 27:11347.
55. Biswas S., Gawande S., Bromberg V., Sun Y. Effects of particle size and substrate surface properties on deposition dynamics of inkjet-printed colloidal drops for printable photovoltaics fabrication. J. Sol. Energy Eng. 2010, 132:021010.
56. Castrejon-Pita J.R., Kubiak K.J., Castrejon-Pita A.A., Wilson M.C.T., Hutchings I.M. Mixing and internal dynamics of droplets impacting and coalescing on a solid surface. Phys. Rev. E 2013, 88:023023.
57. Lok K.P., Ober C.K. Particle size control in dispersion polymerization of polystyrene. Can. J. Chem. 1985, 63:209.
58. Phillips R.J., Armstrong R.C., Brown R.A., Graham A.L., Abbott J.R. A constitutive equation for concentrated suspensions that accounts for shear-induced particle migration. Phys. Fluids A: Fluid Dyn. 1992, 4:30.
59. Han M., Kim C., Kim M., Lee S. Particle migration in tube flow of suspensions. J. Rheol. 1999, 43:1157.
60. Welty J.R., Wicks C.E., Wilson R.E., Rorrer G. Fundamentals of Momentum, Heat and Mass Transfer 2001, Wiley, USA, (Chapter 30). 4th ed.
61. Tanner L.H. The spreading of silicone oil drops on horizontal surfaces. J. Phys. D: Appl. Phys. 1979, 12:1473.
62. Hecht E. Optics 1987, Addison-Wesley Publishing Company, USA, (Chapter 9). 2nd ed.
63. Davis S.H. Perspectives in Fluid Dynamics 2003, Cambridge University Press, Cambridge, (Chapter 1).
64. Kralchevsky P.A., Nagayama K. Capillary interactions between particles bound to interfaces, liquid films and biomembranes. Adv. Colloid Interface 2000, 85:145.
65. Ajaev V.S. Spreading of thin volatile liquid droplets on uniformly heated surfaces. J. Fluid Mech. 2005, 528:279.