Initial start-up and magnet polarity estimation method for HF test current injection based sensorless control of PMSM

16th International Power Electronics and Motion Control Conference and Exposition, PEMC 2014

Volumn , Issue , 2014, Pages 59-64

  Seilmeier, Markus ^a   Piepenbreier, Bernhard ^a  

^a UNIVERSITY OF ERLANGEN NUREMBERG   (Germany)

Author keywords

Current injection; Initial rotor position; Magnet polarity estimation; Permanent magnet motors; Saliency; Sensorless control

Indexed keywords

ELECTRIC MOTORS; INDUCTANCE; MAGNETIC POLARITY; PERMANENT MAGNETS; SYNCHRONOUS MOTORS;

CURRENT INJECTIONS; INITIAL ROTOR POSITION; PERMANENT MAGNET MOTOR; POLARITY ESTIMATION; SALIENCY;

SENSORLESS CONTROL;

EID: 84920521961     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/EPEPEMC.2014.6980538     Document Type: Conference Paper

References (32)

1. D. Zaltni, M. N. Abdelkrim, M. Ghanes, and J. P. Barbot, "Observability analysis of pmsm," in Internation Conference on Signals, Circuits and Systems, 2009.
2. R. Bojoi, M. Pastorelli, J. Bottomley, and P. Giangrande, "Sensorless control of pm motor drives-A technology status review," in IEEE Workshop on Electrical Machines Design Control and Diagnosis (WEMDCD), 2013.
3. M. Linke, R. Kennel, and J. Holtz, "Sensorless speed and position control of synchronous machines using alternating carrier injection," in Electric Machines and Drives Conference, 2003. IEMDC'03., 2003.
4. J. Holtz, "Acquisition of position error and magnet polarity for sensorless control of pm synchronous machines," in IEEE Transactions on Industry Appliactions, 2008.
5. P. L. Jansen and R. D. Lorenz, "Transducerless position and velocity estimation in induction and salient ac machines," in IEEE Transactions on Industry Applications, 1995.
6. S. Kim and S.-K. Sul, "High performance position sensorless control using rotating voltage signal injection in IPMSM," in Proceedings of the 14th European Conference on: Power Electronics and Applications (EPE 2011), 2011, pp. 1-10.
7. T. Frenzke, "Impacts of cross-saturation on sensorless control of surface permanent magnet synchronous motors," in 2005 European Conference on Power Electronics and Applications. IEEE, 2005.
8. D. Reigosa, P. Garcia, D. Raca, F. Briz, and R. D. Lorenz, "Measurement and Adaptive Decoupling of Cross-Saturation Effects and Secondary Saliencies in Sensorless-Controlled IPM Synchronous Machines," in IEEE Industry Applications Annual Meeting, 2007.
9. A. Piippo and J. Luomi, "Inductance harmonics in permanent magnet synchronous motors and reduction of their effects in sensorless control," in Proceedings of the XVII International Conference on Electric Machines (ICEM 2006), 2006.
10. S. Ebersberger, M. Seilmeier, and B. Piepenbreier, "Flatness Based Sensorless Control of PMSM using Test Current Signal Injection and Compensation for Differential Cross-Coupling Inductances at Standstill and Low Speed Range," in 4th Symposium on Sensorless Control for Electrical Drives, 2013.
11. L. A. S. Ribeiro, M. W. Degner, F. Briz, and R. D. Lorenz, "Comparison of carrier signal voltage and current injection for the estimation of flux angle and rotor position," in IEEE Industry Applications Conference, 1998.
12. S. Ostlund and M. Brokemper, "Initial rotor position detection for an integrated pm synchronous motor drive," in Industry Applications Conference (IAS'95), 1995.
13. S. Nakashima, Y. Inagaki, and I. Miki, "Sensorless initial rotor position estimation of surface permanent-magnet synchronous motor," in IEEE Transactions on Industry Applications, Vol. 36, No. 6 Pages: 1598-1603, 2000.
14. T. Yuzawa, K. Tanaka, R. Moriyama, and I. Miki, "An efficient estimation method of sensorless initial rotor position for surface pm synchronous motor," in IEEE International Electric Machines and Drives Conference (IEMDC 2001), 2001.
15. S. Murakami, T. Shiota, M. Ohto, K. Ide, and M. Hisatsune, "Encoderless servo drive with adequately designed ipmsm for pulse-voltageinjection-based position detection," in IEEE Transactions on Industry Applications. Vol. 48 Issue: 6 Pages 1922-1930, 2012.
16. H. Kim, K. Huh, R. D. Lorenz, and T. M. Jahns, "A novel method for initial rotor position estimation for ipm synchronous machine drives," in IEEE Transactions on Industry Applications, Vol. 40, Issue 5. Pages: 1369-1378, 2004.
17. M. C. Harke, D. Raca, R. Lorenz, and E. Schlevensky, "Implementation of a fast initial position and magnet polarity estimation for pm synchronous machines in traction and white goods applications," in IEEE International Conference on Electro Information Technology, 2005.
18. J. Holtz, "Initial rotor polarity detection and sensorless control of pm synchronous machines," in Industry Applications Conference (IAS 2006), 2006.
19. O. Benjak and D. Gerling, "Review of position estimation methods for ipmsm drives without a position sensor part iii: Methods based on saliency and signal injection," in XIX International Conference on Electrical Machines (ICEM), 2010.
20. D. D. Reigosa, P. Garcia, F. B. D. Raca, and R. D. Lorenz, "Modeling and adaptive decoupling of high-frequency resistance and temperature effects in carrier-based sensorless control of pm synchronous machines," in IEEE Transactions on Industry Applications, Vol. 46, 2010.
21. M. Seilmeier, S. Ebersberger, and B. Piepenbreier, "Identification of high frequency resistances and inductances for sensorless control of PMSM," in 4th Symposium on Sensorless Control for Electrical Drives, 2013.
22. J. Melkebeek and J. Willems, "Reciprocity relations for the mutual inductances between orthogonal axis windings in saturated salient-pole machines," IEEE Transactions on Industry Applications, vol. 26, no. 1, pp. 107-114, 1990.
23. L. Alberti, N. Bianchi, M. Morandin, and J. Gyselinck, "Finite-element analysis of electrical machines for sensorless drives with signal injection," in Energy Conversion Congress and Exposition (ECCE), 2012 IEEE, 2012, pp. 861-868.
24. L. Alberti, N. Bianchi, and S. Bolognani, "Investigation on the selfsensing capability of a fractional-slot inset PM motor," in 4th Symposium on Sensorless Control for Electrical Drives, 2013.
25. M. Fliess, J. Levine, P. Martin, and P. Rouchon, "Flatness and defect of non-linear systems: introductory theory and examples," Internation Journal of Control, vol. 61, Issue 6, pp. 1327-1361, 1995.
26. B. A. Francis and W. M. Wonham, "The internal model principle for linear multivariable regulators," Applied Mathematics & Optimization, vol. 2, no. 2, pp. 170-194, 1975.
27. L. Ribeiro, M. Degner, F. Briz, and R. Lorenz, "Comparison of carrier signal voltage and current injection for the estimation of flux angle or rotor position," in Conference Record of 1998 IEEE Industry Applications Conference. Thirty-Third IAS Annual Meeting (Cat. No. 98CH36242). IEEE, 1998, pp. 452-459.
28. M. Liserre, R. Teodorescu, and F. Blaabjerg, "Multiple harmonics control for three-phase grid converter systems with the use of PI-RES current controller in a rotating frame," IEEE Transactions on Power Electronics, vol. 21, no. 3, pp. 836-841, 2006.
29. L. Limongi, R. Bojoi, G. Griva, and A. Tenconi, "Digital current-control schemes," Industrial Electronics Magazine, IEEE, vol. 3, no. 1, pp. 20-31, 2009.
30. S. Ebersberger and B. Piepenbreier, "Identification of differential inductances of permanent magnet synchronous machines using test current signal injection," in International Symposium on Power Electronics, Electrical Drives, Automation and Motion, 2012.
31. M. Seilmeier, A. Boehm, I. Hahn, and B. Piepenbreier, "Identification of time-variant high frequency parameters for sensorless control of PMSM using an internal model principle based high frequency current control," in XXth International Conference on Electrical Machines, 2012.
32. M. Seilmeier, S. Ebersberger, and B. Piepenbreier, "PMSM Model for Sensorless Control Considering Saturation Induced Secondary Saliencies," in 4th Symposium on Sensorless Control for Electrical Drives, 2013.