Finite-element analysis of electrical machines for sensorless drives with signal injection

2012 IEEE Energy Conversion Congress and Exposition, ECCE 2012

Volumn , Issue , 2012, Pages 861-868

  Alberti, Luigi ^a   Bianchi, Nicola ^b   Morandin, Mattia ^b   Gyselinck, Johan ^c  

^a FREE UNIVERSITY OF BOZEN BOLZANO   (Italy)

^b UNIVERSITY OF PADOVA   (Italy)

^c UNIVERSITÉ LIBRE DE BRUXELLES   (Belgium)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTATIONAL TIME; DESIGN PROCESS; DRIVE CONTROL; ELECTRICAL MACHINE; FLUX DENSITY DISTRIBUTION; HIGH-FREQUENCY SIGNAL INJECTION; INJECTION FREQUENCIES; MAGNETOSTATIC FIELD; MAXIMUM TORQUE; OPERATING POINTS; SELF-SENSING; SENSORLESS; SENSORLESS DRIVE; SIGNAL INJECTION; TIME-HARMONIC;

DIGITAL STORAGE; ELECTRIC DRIVES; ELECTRIC MACHINERY; ENERGY CONVERSION; EXHIBITIONS;

FINITE ELEMENT METHOD;

EID: 84870901704     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/ECCE.2012.6342728     Document Type: Conference Paper

References (27)

1. M. W. Degner and R. D. Lorenz, "Using multiple saliencies for the estimation of flux, position, and velocity in AC machines," IEEE Transactions on Industry Applications, vol. 34, no. 5, pp. 1097-1104, Sep./Oct. 1998.
2. J. Holtz, "Sensorless position control of induction motorsan emerging technology," IEEE Transactions on Industrial Electronics, vol. 45, no. 6, pp. 840-851, Dec. 1998.
3. G. Iwanski and W. Koczara, "Sensorless Direct Voltage Control of the Stand-alone Slip-ring Induction Generator," IEEE Transactions on Industrial Electronics, vol. 54, no. 2, pp. 1237-1239, Apr. 2007.
4. R. Pena, R. Cerdenas, J. Proboste, G. Asher, and J. Clare, "Sensorless Control of Doubly-fed Induction Generators Using a Rotor-current-based MRAS Observer," IEEE Transactions on Industrial Electronics, vol. 55, no. 1, pp. 330-339, Jan. 2008.
5. A. Consoli, F. Russo, G. Scarcella, and A. Testa, "Low-and zero-speed sensorless control of synchronous reluctance motors," IEEE Transactions on Industry Applications, vol. 35, no. 5, pp. 1050-1057, sep/oct 1999.
6. J.-H. Jang, S.-K. Sul, J.-I. Ha, K. Ide, and M. Sawamura, "Sensorless drive of surface-mounted permanent-magnet motor by high-frequency signal injection based on magnetic saliency," IEEE Transactions on Industry Applications, vol. 39, no. 4, pp. 1031-1039, july-aug. 2003.
7. J. Cilia, G. M. Asher, K. J. Bradley, and M. Sumner, "Sensorless position detection for vector-controlled induction motor drives using an asymmetric outer-section cage," IEEE Transactions on Industry Applications, vol. 33, no. 5, pp. 1162-1169, Sep./Oct. 1997.
8. N. Bianchi, S. Bolognani, J.-H. Jang, and S.-K. Sul, "Comparison of pm motor structures and sensorless control techniques for zero-speed rotor position detection," IEEE Transactions on Power Electronics, vol. 22, no. 6, pp. 2466-2475, nov. 2007.
9. -, "Advantages of inset pm machines for zero-speed sensorless position detection," IEEE Transactions on Industry Applications, vol. 44, no. 4, pp. 1190-1198, july-aug. 2008.
10. A. Ferrah, P. J. Hogben-Laing, K. J. Bradley, G. M. Asher, and M. S. Woolfson, "The effect of rotor design on sensorless speed estimation using rotor slot harmonics identified by adaptive digital filtering using the maximum likelihood approach," in Record of the Thirty-Second IEEE Industry Applications Annual Meeting Conference, vol. 1, New Orleans, LA, Oct. 1997, pp. 128-135.
11. S. Nandi, "Modeling of induction machines including stator and rotor slot effects," IEEE Transactions on Industry Applications, vol. 40, no. 4, pp. 1058-1065, july-aug. 2004.
12. M. J. Duran, J. L. Duran, F. Perez, and J. Fernandez, "Induction-motor sensorless vector control with online parameter estimation and overcurrent protection," IEEE Transactions on Industrial Electronics, vol. 53, no. 1, pp. 154-161, Dec. 2005.
13. P. Guglielmi, M. Pastorelli, and A. Vagati, "Cross-saturation effects in IPM motors and related impact on sensorless control," IEEE Transactions on Industry Applications, vol. 42, no. 6, pp. 1516-1522, nov.-dec. 2006.
14. N. Bianchi and S. Bolognani, "Influence of rotor geometry of an ipm motor on sensorless control feasibility," IEEE Transactions on Industry Applications, vol. 43, no. 1, pp. 87-96, jan.-feb. 2007.
15. -, "Sensorless-Oriented-Design of PM Motors," IEEE Transaction on Industry Applications, vol. 45, no. 4, pp. 1249-1257, Jul./Aug. 2009
16. S.-C. Yang and R. D. Lorenz, "Comparison of resistancebased and inductance-based self-sensing control for surface permanent magnet machine using high frequency signal injection," in Energy Conversion Congress and Exposition (ECCE), 2011 IEEE, sept. 2011, pp. 2701-2708.
17. M. Morandin, S. Bolognani, and A. Faggion, "Outer-rotor ringed-pole SPM starter-alternator suited for sensorless drives," in Symposium on Sensorless Control for Electrical Drives (SLED), sept. 2011, pp. 96-101.
18. M. Pucci and C. Serporta, "Finite-element Analysis of Rotor Slotting Saliency in Induction Motors for Sensorless Control," IEEE Transactions on Magnetics, vol. 46, no. 2, pp. 650-653, Feb. 2010.
19. J. Melkebeek and J. Willems, "Reciprocity relations for the mutual inductances between orthogonal axis windings in saturated salient-pole machines," IEEE Transactions on Industry Applications, vol. 26, no. 1, pp. 107-114, jan/feb 1990.
20. N. Limsuwan, T. Kato, C.-Y. Yu, J. Tamura, D. Reigosa, K. Akatsu, and R. D. Lorenz, "Secondary resistive losses with high-frequency injection-based self-sensing in ipm machines," in Energy Conversion Congress and Exposition (ECCE), 2011 IEEE, sept. 2011, pp. 622-629.
21. S.-C. Yang and R. D. Lorenz, "Analysis of iron and magnet losses in surface permanent magnet machines resulting from injection-based self-sensing position estimation," in Energy Conversion Congress and Exposition (ECCE), 2011 IEEE, sept. 2011, pp. 630-637.
22. N. Bianchi and S. Bolognani, "Magnetic models of saturated interior permanent magnet motors based on finite element analysis," in Thirty-Third IAS Annual Meeting. The 1998 IEEE Industry Applications Conference, vol. 1, oct 1998, pp. 27-34 vol.1.
23. J. Walker, D. Dorrell, and C. Cossar, "Flux-linkage calculation in permanent-magnet motors using the frozen permeabilities method," IEEE Transactions on Magnetics, vol. 41, no. 10, pp. 3946-3948, oct. 2005.
24. J. K. Tangudu, T. M. Jahns, A. M. El-Refaie, and Z. Q. Zhu, "Segregation of torque components in fractional-slot concentrated-winding interior PM machines using frozen permeability," in Energy Conversion Congress and Exposition, 2009. ECCE 2009. IEEE, San Jose, CA, Sep. 2009, pp. 3814-3821.
25. P. Dular and C. Geuzaine, "GetDP reference manual: the documentation for GetDP, a general environment for the treatment of discrete problems," http://www.geuz.org/getdp/.
26. J. Gyselinck, P. Dular, N. Sadowski, J. Leite, and J. Bastos, "Incorporation of a Jiles-Atherton vector hysteresis model in 2D FE magnetic field computations: Application of the Newton-Raphson method," COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, vol. 23, no. 3, pp. 685-693, 2004.
27. L. Alberti, M. Barcaro, M. D. Pr, A. Faggion, L. Sgarbossa, N. Bianchi, and S. Bolognani, "IPM machine drive design and tests for an integrated starter-alternator application," IEEE Transactions on Industry Applications, vol. 46, no. 3, pp. 993-1001, may-june 2010.