Identification of time-variant high frequency parameters for sensorless control of PMSM using an internal model principle based high frequency current control

Proceedings - 2012 20th International Conference on Electrical Machines, ICEM 2012

Volumn , Issue , 2012, Pages 987-993

  Seilmeier, Markus ^a   Boehm, Andreas ^a   Hahn, Ingo ^a   Piepenbreier, Bernhard ^a  

^a UNIVERSITY OF ERLANGEN NUREMBERG   (Germany)

Author keywords

differential inductances; field oriented control; internal model principle; nonlinear coordinate transformation; parameter identification; PMSM; sensorless control; test current control

Indexed keywords

FIELD ORIENTED CONTROL; INTERNAL MODEL PRINCIPLE; NONLINEAR COORDINATE TRANSFORMATION; PMSM; SENSOR LESS CONTROL;

ELECTRIC CURRENT CONTROL; ELECTRIC MACHINERY; INDUCTANCE; MATHEMATICAL TRANSFORMATIONS;

IDENTIFICATION (CONTROL SYSTEMS);

EID: 84870845467     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/ICElMach.2012.6349996     Document Type: Conference Paper

References (28)

1. D. Raca, P. Garcia, D. Reigosa, and R. Lorenz, "Carrier-Signal Selection for Sensorless Control of PM Synchronous Machines at Zero and Very Low Speeds," in IEEE Transactions on Industry Applications, Vol. 46, 2010.
2. J. Reill, "Position Sensorless Control for an accelerometer based, highly dynamic robot drive system with a Permanent Magnet Synchronous Machine (in German)," Ph. D. dissertation, University of Erlangen-Nuremberg, Germany, 2010.
3. M. Linke, R. Kennel, and J. Holtz, "Sensorless Speed and Position Control of Synchronous Machines using Alternating Carrier Injection," in International Electric Machines and Drives Conference (IEMDC), 2003.
4. S. Kim and S.-K. Sul, "High performance position sensorless control using rotating voltage signal injection in IPMSM," in Power Elec-Tronics and Applications (EPE 2011), Proceedings of the 2011-14th European Conference on, 2011.
5. I. Hahn, "Differential magnetic anisotropy-prerequisite for rotor position detection of PM-synchronous machines with signal injection methods," in Sensorless Control of Electrical Drives (SLED), 2010.
6. J. Reill, B. Piepenbreier, and I. Hahn, "Utilisation of magnetic saliency for sensorless-control of permanent-magnet synchronous motors," in International Symposium on Power Electronics Electrical Drives Automation and Motion (SPEEDAM), 2010.
7. T. Frenzke, "Impacts of cross-saturation on sensorless control of surface permanent magnet synchronous motors," European Conference on Power Electronics and Applications, 2005.
8. D. Reigosa, P. Garcia, D. Raca, F. Briz, and R. D. Lorenz, "Measurement and adaptive decoupling of cross-saturation effects and secondary saliencies in sensorless controlled IPM synchronous machines," in IEEE Transactions on Industry Applications, 2008.
9. N. Bianchi and S. Bolognani, "Influence of rotor geometry of an interior PM motor on sensorless control feasibility," in Industry Applications Conference, 2005.
10. P. Guglielmi, M. Pastorelli, and A. Vagati, "Cross-saturation effects in IPM motors and related impact on sensorless control," in IEEE Transactions on Industry Applications, 2006.
11. J.-H. Jang, J.-I. Ha, M. Ohto, K. Ide, and S.-K. Sul, "Analysis of permanent-magnet machine for sensorless control based on highfrequency signal injection," in IEEE Transactions on Industry Ap-plications, 2004.
12. S.-C. Yang and R. D. Lorenz, "Surface permanent magnet synchronous machine self-sensing position estimation at low speed using eddy current reflected asymmetric resistance," in EPE ECCE Europe, 2011.
13. K. Lu, M. Vetuschi, P. Rasmussen, and A. Ritchie, "Determination of high-frequency d-And q-Axis inductances for surface-mounted permanent magnet synchronous machines," in IEEE Transactions on Instrumentation and Measurement, Vol. 59, Issue: 9, 2010.
14. J. Reill, S. L. Kellner, S. Ebersberger, M. Seilmeier, and B. Piepenbreier, "High precision identification method for differential dqinductances of permanent magnet synchronous machines," in Inter-national Exhibition and Conference for Power Electronics, Intelligent Motion, Power Quality (PCIM Europe), 2010.
15. G. El-Murr, D. Giaouris, and J. W. Finch, "Online cross-coupling and self-incremental inductances determination of salient permanent magnet synchronous machines," in Conference on Power Electronics, Machines and Drives (PEMD), 2009.
16. H. Peter and I. Hahn, "Determination of differential inductances of permanent magnet synchronous machines for sensorless control," in International Electric Machines and Drives Conference (IEMDC), 2011.
17. N. Limsuwan, T. Kato, C.-Y. Yu, J. Tamura, D. Reigosa, K. Akatsu, and R. D. Lorenz, "Secondary resistive losses with high-frequency injection-based self-sensing in IPM machines," in IEEE Energy Con-version Congress and Exposition (ECCE), 2011.
18. S.-C. Yang and R. D. Lorenz, "Comparison of resistance-based and inductance-based self-sensing control for surface permanent magnet machine using high frequency injection," in IEEE Energy Conversion Congress and Exposition (ECCE), 2011.
19. D. E. Salt, D. Drury, D. Holliday, A. Griffo, P. Sangha, and A. Dinu, "Compensation of inverter nonlinear distortion effects for signalinjection-based sensorless control," in IEEE Transactions on Industry Applications, 2011.
20. L. M. Gong and Z. Q. Zhu, "A novel method for compensating inverter nonlinearity effects in carrier signal injection-based sensorless control from positive sequence carrier current distortion," in IEEE Transactions on Industry Applications, 2011.
21. J. Lunze, Regelungstechnik 2. Springer Verlag, Berlin, Germany, 2010.
22. M. Seilmeier, C. Wolz, and B. Piepenbreier, "Modelling and Model Based Compensation of Non-Ideal Characteristics of Two-Level Voltage Source Inverters for Drive Control Application," in Electric Drives Production Conference (EDPC), 2011.
23. M. Seilmeier and B. Piepenbreier, "Modeling of PMSM with multiple saliencies using a stator-oriented magnetic circuit approach," in Inter-national Electric Machines and Drives Conference (IEMDC), 2011.
24. J. Chiasson, Ed., Modeling and High Performance Control of Electric Machines. John Wiley & Sons, Inc. Hoboken, NJ, USA, 2005.
25. M. Seilmeier, S. Arenz, B. Piepenbreier, and I. Hahn, "Model based closed loop control scheme for compensation of harmonic currents in PM-synchronous machines," in International Symposium on Power Electronics Electrical Drives Automation and Motion (SPEEDAM), 2010.
26. D. Basic, F. Malrait, and P. Rouchon, "Current controller for lowfrequency signal injection and rotor flux position tracking at low speeds," in IEEE Transactions on Industrial Electronics, 2011.
27. S. Ebersberger and B. Piepenbreier, "Identification of differential inductances of permanent magnet synchronous machines using test current signal injection," in International Symposium on Power Elec-Tronics Electrical Drives Automation and Motion (SPEEDAM), 2012.
28. F. Freijido, A. Yepes, J. Malvar, O. Lopez, P. Fernandez-Comesana, A. Vidal, and J. Doval-Gandoy, "Frequency tracking of digital resonant filters for control of power converters connected to public distribution systems," in IET Power Electronics, Vol. 4, No. 4, 2011.