Water & Wastewater Infrastructure: Energy Efficiency and Sustainability

Water & Wastewater Infrastructure: Energy Efficiency and Sustainability

Volumn , Issue , 2013, Pages 1-443

  Spellman, Frank R ^a  

^a OLD DOMINION UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84920478819     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Book

References (352)

1. Drinan, J.E. and Spellman, F.R. (2012). Water and Wastewater Treatment: A Guide for the Nonengineering Professional, 2nd ed., CRC Press, Boca Raton, FL.
2. Elkington, J. (1999). Cannibals with Forks, Wiley, New York.
3. Spellman, F.R. (2008). Handbook of Water and Wastewater Treatment Plant Operations, 2nd ed., CRC Press, Boca Raton, FL.
4. USEPA. (2002). The Clean Water and Drinking Water Infrastructure Gap Analysis, EPA-816-R-02-020, U.S. Environmental Protection Agency, Washington, DC.
5. USEPA. (2012). Frequently Asked Questions: Water Infrastructure and Sustainability, U.S. Environmental Protection Agency, Washington, DC, http://water.epa.gov/infrastructure/sustain/si_faqs.cfm.
6. ASCE. (1999). Optimization of Collection System Maintenance Frequencies and System Performance, American Society of Civil Engineers, Reston, VA.
7. AWWA. (2001). Dawn of the Replacement Era: Reinvesting in Drinking Water Infrastructure, American Water Works Association, Denver, CO.
8. CBO. (1999). Trends in Public Infrastructure, Congressional Budget Office, Washington, DC.
9. U.S. Census Bureau. (2000). The Changing Shape of the Nation's Income Distribution, 1947-1998, P60-204, Current Population Reports Series, U.S. Census Bureau, Washington, DC.
10. USEPA. (2002). The Clean Water and Drinking Water Infrastructure Gap Analysis, EPA-816-R-02-020, U.S. Environmental Protection Agency, Washington, DC.
11. USEPA. (2007). 2007 Drinking Water Infrastructure Needs Survey and Assessment, U.S. Environmental Protection Agency, Washington, DC.
12. USEPA. (2008). Clean Watersheds Needs Survey, U.S. Environmental Protection Agency, Washington, DC.
13. EIA. (2012). Energy Explained: Your Guide to Understanding Energy, Energy Information Administration, Washington, DC (http://www.eia.gov/energyexplained/index.cfm).
14. Spellman, F.R. (2005). The Science of Renewable Energy, lecture presented to environmental health students, Old Dominion University, Norfolk, VA.
15. Camp, R.C. (1989). The Search for Industry Best Practices That Lead to Superior Performance, ASQC Quality Press, Milwaukee, WI.
16. EIA. (2008). Current and Historical Monthly Retail Sales, Revenues and Average Revenue per Kilowatt Hour by State and by Sector, EIA-826, Energy Information Administration, Washington, DC (http://www.eia.gov/cneaf/electricity/page/sales_revenue.xls).
17. Gellman, B. (2002). Cyber-attacks by Al Qaeda feared: terrorists at threshold of using Internet as tool of bloodshed, experts say, Washington Post, June 27, p. A01.
18. Jones, T. (2006). Water-Wastewater Committee: Program Opportunities in the Municipal Sector: Priorities for 2006, presentation to CEE June Program Meeting, Boston, MA.
19. Spellman, F.R. (2009). Handbook of Water and Wastewater Treatment Plant Operations, 2nd ed., CRC Press, Boca Raton, FL.
20. USEPA. (2008). Ensuring a Sustainable Future: An Energy Management Guidebook for Wastewater and Water Utilities, U.S. Environmental Protection Agency, Washington, DC.
21. WEF. (1997). Energy Conservation in Wastewater Treatment Facilities, Manual of Practice No. MFD-2, Water Environment Federation, Alexandria, VA.
22. Anon. (1995). Commercial cooling update: chiller selection, SU-103433-RI, EPRI Journal, 7(Rev. I).
23. Campbell, S.J. (1987). Solid-State AC Motor Controls, Marcel Dekker, New York.
24. CEC. (2000). Heating, Ventilation, and Air Conditioning Enhancements, California Energy Commission, Sacramento (http://www.energy.ca.gov/process/pubs/hvac.pdf).
25. EIA. (2012). What Is Energy? Explained, Energy Information Administration, Washington, DC (http://www.eia.gov/energyexplained/print.cfm?page=about_laws_of_energy).
26. Jaeschke, R.L. (1978). Controlling Power Transmission Systems, Penton/IPC, Cleveland OH.
27. Nailen R.L. (1994). Finding true power output isn't easy, Electrical Apparatus, 47(2), 31-36.
28. Siskind, C.S. (1963). Electrical Control Systems in Industry, McGraw-Hill, New York.
29. Spear, M. (2005). Drive up energy efficiency, ChemicalProcessing.com, 2005, http://www.chemicalprocessing.com/articles/2005/489/.
30. Spellman, F.R. (2007). Handbook of Water and Wastewater Treatment Plant Operations, 2nd ed., CRC Press, Boca Raton, FL.
31. USDOE. (2001). Determining Electric Motor Load and Efficiency, Fact Sheet, U.S. Department of Energy, Washington, DC.
32. USEPA. (2005). Water and Wastewater Security Product Guide, U.S. Environmental Protection Agency, Washington, DC (http://cfpub.epa.gov/safewater/watersecurity/guide/productguide.cfm?page=visualsurveillance).
33. WSEO. (1993). Improving the Energy Efficiency of Wastewater Treatment Facilities, WSEO-192, Washington State Energy Office, Olympia.
34. Bureau of Environmental Services (BES). (1994). Combined Sewer Overflow Facilities Plan, prepared by CH2M Hill for City of Portland, OR.
35. CEC. (2001). Electrical Load Management, California Energy Commission, Sacramento.
36. Hides, S. (1997). Quantity Is the Key to Improving Quality: A Common Sense Approach for Reducing Wet Weather Impacts, paper presented at the 26th Annual WEAO Technical Symposium and OPCEA Exhibitions, London, Ontario, Canada.
37. McKelvie, S. (1996). Flowslipping: an effective management technique for urban runoff, in Urban Wet Weather Pollution Conference Proceedings, Quebec City.
38. Spellman, F.R. (2007). Handbook of Water and Wastewater Treatment Plant Operations, 2nd ed., CRC Press, Boca Raton, FL.
39. USEPA. (1994). Combined sewer overflow (CSO) control policy; Notice, Federal Register, 59(75), 18687-18698.
40. USEPA. (1999). Combined Sewer Overflow Technology Fact Sheet: Inflow Reduction, EPA 832-F-99-035, U.S. Environmental Protection Agency, Washington, DC.
41. USEPA. (2012). Water & Energy Efficiency in Water and Wastewater Facilities, U.S. Environmental Protection Agency, Washington, DC (http://www.epa.gov/region9/waterinfrastructure/technology.html).
42. WSEO. (1993). Improving the Energy Efficiency of Wastewater Treatment Facilities, WSEO-192, Washington State Energy Office, Olympia.
43. Bureau of Environmental Services (BES). (1994). Combined Sewer Overflow Facilities Plan, prepared by CH2M Hill for City of Portland, OR.
44. California Energy Commission. (2001). Electric Load Management, California Energy Commission, Sacramento (www.energy.ca.gov/process/pubs/eload.pdf).
45. Spellman, F.R. (2007). Handbook of Water and Wastewater Treatment Plant Operations, 2nd ed., CRC Press, Boca Raton, FL.
46. USEPA. (1999). Combined Sewer Overflow Technology Fact Sheet: Inflow Reduction, EPA 832-F-99-035, U.S. Environmental Protection Agency, Washington, DC.
47. USEPA. (2008). Catalog of CHP Technologies, U.S. Environmental Protection Agency, Washington, DC (www.epa.gov/chp/documents/catalog_chptech_full.pdf).
48. USEPA. (2011). Opportunities for Combined Heat and Power at Wastewater Treatment Facilities: Market Analysis and Lessons from the Field, U.S. Environmental Protection Agency, Washington, DC (www.epa.gov/chp/documents/wwtf_opportunities.pdf).
49. USEPA. (2012). Methods for Calculating Efficiency, U.S. Environmental Protection Agency, Washington, DC (www.epa.gov/chp/basic/methods.html).
50. USEPA. (2012). Water & Energy Efficiency in Water and Wastewater Facilities, U.S. Environmental Protection Agency, Washington, DC (www.epa.gov/region9/waterinfrastructure/technology. html).
51. USEPA. (2012). Efficiency Metrics for CHP Systems: Total System and Effective Electric Efficiencies, U.S. Environmental Protection Agency, Washington, DC.
52. USEPA. (2012). Waste Heat to Power Systems, U.S. Environmental Protection Agency, Washington, DC.
53. WSEO. (1993). Improving the Energy Efficiency of Wastewater Treatment Facilities, WSEO-192, Washington State Energy Office, Olympia.
54. Spellman, F.R. (2007). Handbook of Water and Wastewater Treatment Plant Operations, 2nd ed., CRC Press, Boca Raton, FL.
55. USEPA. (2008). Catalog of CHP Technologies, U.S. Environmental Protection Agency, Washington, DC (www.epa.gov/chp/documents/catalog_chptech_full.pdf).
56. USEPA. (2008). Technology Characterization: Gas Turbines, U.S. Environmental Protection Agency, Washington, DC (www.epa.gov/chp/documents/catalog_chptech_gas_turbines.pdf).
57. USEPA. (2011). Opportunities for Combined Heat and Power at Wastewater Treatment Facilities: Market Analysis and Lessons from the Field, U.S. Environmental Protection Agency, Washington, DC (www.epa.gov/chp/documents/wwtf_opportunities.pdf).
58. USEPA. (2012). Methods for Calculating Efficiency, U.S. Environmental Protection Agency, Washington, DC (www.epa.gov/chp/basic/methods.html).
59. WSEO. (1993). Improving the Energy Efficiency of Wastewater Treatment Facilities, WSEO-192, Washington State Energy Office, Olympia.
60. Spellman, F.R. (2007). Handbook of Water and Wastewater Treatment Plant Operations, 2nd ed., CRC Press, Boca Raton, FL.
61. USEPA. (2006). Auxiliary and Supplemental Power Fact Sheet: Microturbines, EPA 832-F-05-014, U.S. Environmental Protection Agency, Washington, DC.
62. USEPA. (2006). Auxiliary and Supplemental Power Fact Sheet: Viable Sources, EPA 832-F-05-009, U.S. Environmental Protection Agency, Washington, DC.
63. USEPA. (2008). Technology Characterization: Microturbines, U.S. Environmental Protection Agency, Washington, DC (www.epa.gov/chp/documents/catalog_chptech_microturbines.pdf).
64. USEPA. (2008). Catalog of CHP Technologies, U.S. Environmental Protection Agency, Washington, DC (www.epa.gov/chp/documents/catalog_chptech_full.pdf).
65. WSEO. (1993). Improving the Energy Efficiency of Wastewater Treatment Facilities, WSEO-192, Washington State Energy Office, Olympia.
66. Spellman, F.R. (2007). Handbook of Water and Wastewater Treatment Plant Operations, 2nd ed., CRC Press, Boca Raton, FL.
67. USEPA. (2006). Auxiliary and Supplemental Power Fact Sheet: Microturbines, EPA 832-F-05-014, U.S. Environmental Protection Agency, Washington, DC.
68. USEPA. (2006). Auxiliary and Supplemental Power Fact Sheet: Viable Sources, EPA 832-F-05-009, U.S. Environmental Protection Agency, Washington, DC.
69. USEPA. (2008). Catalog of CHP Technologies, U.S. Environmental Protection Agency, Washington, DC (www.epa.gov/chp/documents/catalog_chptech_full.pdf).
70. Goldstein, L., Hedman, B., Knowles, D. et al. (2003). Gas-Fired Distributed Energy Resource Technology Characterizations, NREL/TP-620-34783, Gas Research Institute and National Renewable Energy Laboratory, Washington, DC (www.nrel.gov/docs/fy04osti/34783.pdf).
71. Spellman, F.R. (2007). Handbook of Water and Wastewater Treatment Plant Operations, 2nd ed., CRC Press, Boca Raton, FL.
72. USEPA. (2006). Auxiliary and Supplemental Power Fact Sheet: Microturbines, EPA 832-F-05-014, U.S. Environmental Protection Agency, Washington, DC.
73. USEPA. (2006). Auxiliary and Supplemental Power Fact Sheet: Viable Sources, EPA 832-F-05-009, U.S. Environmental Protection Agency, Washington, DC.
74. USEPA. (2008). Catalog of CHP Technologies, U.S. Environmental Protection Agency, Washington, DC (www.epa.gov/chp/documents/catalog_chptech_full.pdf).
75. USEPA. (2012). Combined Heat and Power Partnership: Basic Information, U.S. Environmental Protection Agency, Washington, DC (http://www.epa.gov/chp/basic/index.html).
76. Anon. (2007). Science Trackers Bullets Online: Batteries, Supercapacitors, and Fuel Cells, Science Reference Services, Library of Congress, Washington, DC (http://www.loc.gov/rr/scitech/tracer-bullets/batteriestb.html#top).
77. Barbir, F. (2005). PEM Fuel Cells: Theory and Practice, Elsevier, New York.
78. EG&G Technical Services, Inc. (2004). Fuel Cell Handbook, 7th ed., U.S. Department of Energy, National Energy Technology Laboratory, Morgantown, WV.
79. Eisenberg, A. and Kim, J.S. (1998). Introduction to Ionomers, Wiley, New York.
80. Goldstein, L., Hedman, B., Knowles, D. et al. (2003). Gas-Fired Distributed Energy Resource Technology Characterizations, NREL/TP-620-34783, Gas Research Institute and National Renewable Energy Laboratory, Washington, DC (www.nrel.gov/docs/fy04osti/34783.pdf).
81. Hardi, P. and Zdan, T., Eds. (1997). Assessing Sustainable Development: Principles in Practice, International Institute for Sustainable Development, Winnipeg.
82. Hoogers, G., Ed. (2003). Fuel Cell Technology Handbook, CRC Press, Boca Raton, FL.
83. Larminie, J. and Dicks A. (2003). Fuel Cell Systems Explained, 2nd ed., John Wiley & Sons, New York.
84. Meibuhr, S.G. (1966). Electrochim. Acta, 11, 1301.
85. NREL. (2009). Ultracapacitors, National Renewable Energy Laboratory, Washington, DC (http://www.nrel.gov/vehiclesandfuels/energystorage/ultracapacitors.html?print).
86. Singhal, S.C. and Kendall, K. (2003). High-Temperature Solid Oxide Fuel Cells: Fundamentals, Design and Applications, Elsevier, New York.
87. Spellman, F.R. (2007). Handbook of Water and Wastewater Treatment Plant Operations, 2nd ed., CRC Press, Boca Raton, FL.
88. Spellman, F.R. and Bieber, R. (2011). The Science of Renewable Energy, CRC Press, Boca Raton, FL.
89. USDOE. (2008a). Hydrogen Production, Energy Efficiency & Renewable Energy, U.S. Department of Energy, Washington, DC (http://www1.eere.energy.gov/hydrogenandfuelcells/production/basics.html).
90. USDOE. (2008b). Fuel Cell Technologies Program: Hydrogen Delivery, Energy Efficiency & Renewable Energy, U.S. Department of Energy, Washington, DC (http://www1.eere.energy.gov/hydrogenandfuelcells/delivery/m/basics.html).
91. USDOE. (2008c). Fuel Cell Technologies Program: Hydrogen Storage, Energy Efficiency & Renewable Energy, U.S. Department of Energy, Washington, DC (http://www1.eere.energy.gov/hydrogenandfuelcells/storage/).
92. USDOE. (2010). Fuel Cell Technologies Program: Fuel Cells, Energy Efficiency & Renewable Energy, U.S. Department of Energy, Washington, DC (http://www1.eere.energy.gov/hydrogenandfuelcells/fuelcells/).
93. USEPA. (2006a). Auxiliary and Supplemental Power Fact Sheet: Microturbines, EPA 832-F-05-014, U.S. Environmental Protection Agency, Washington, DC.
94. USEPA. (2006b). Auxiliary and Supplemental Power Fact Sheet: Fuel Cells, EPA 832-F-05-012, U.S. Environmental Protection Agency, Washington, DC.
95. USEPA. (2008). Catalog of CHP Technologies, U.S. Environmental Protection Agency, Washington, DC (www.epa.gov/chp/documents/catalog_chptech_full.pdf).
96. Vielstich, W. et al., Eds. (2009). Handbook of Fuel Cells: Advances in Electrocatalysis, Materials, Diagnostics and Durability, Wiley, Hoboken, NJ.
97. Allen, H.L., Fox, T.R., and Campbell, R.G. (2005). What's ahead for intensive pine plantation silviculture? Southern Journal of Applied Forestry, 29, 62-69.
98. Anon. (2008). Algae eyed as biofuel alternative, Taipei Times, January 12, p. 2 (http://www.taipe- itimes.com/News/taiwan/archives/2008/01/12/2003396760).
99. Ashford, R.D. (2001). Ashford's Dictionary of Industrial Chemicals, 2nd ed., Wavelength Publications, London.
100. Aylott, M.J. (2008). Yield and spatial supply of bioenergy poplar and willow short-rotation coppice in the U.K., New Phytologist, 178(2), 358-370.
101. Baize, J. (2006). Bioenergy and Biofuels, Agricultural Outlook Forum, February 17, Washington, DC.
102. Baker, J.B. and Broadfoot, W.M. (1979). A Practical Field Method of Site Evaluation for Commercially Important Southern Hardwoods, General Technical Report SO-26, U.S. Department of Agriculture, Forest Service, South Forest Experiment Station, New Orleans, LA.
103. Bender, M. (1999). Economic feasibility review for community-scale farmer cooperatives for biodiesel, Bioresource Technology, 70, 81-87.
104. Christi, Y. (2007). Biodiesel from microalgae, Biotechnology Advances, 25, 294-306.
105. Coyle, W. (2007). The future of biofuels: a global perspective, Amber Waves, November (http://www. thebioenergysite.com/articles/9/the-future-of-biofuels-a-global-perspective).
106. Dickman, D. (2006). Silviculture and biology of short-rotation wood crops in temperate regions: then and now, Biomass and Bioenergy, 30, 696-705.
107. EEA. (2006). Combined Heat and Power Database, Energy and Environmental Analysis, Inc. (ICF International), Fairfax, VA (www.eea-inc.com/chpdata/index.html).
108. EERE. (2008). Biomass Program, U.S. Department of Energy, Energy Efficiency and Renewable Energy, Washington, DC (http://www1.eere.energy.gov/biomass/feedstocks_types.html).
109. EIA. (2006). Annual Energy Outlook 2007 with Projections to 2030, DOE/EIA-0383(2007), U.S. Department of Energy, Energy Information Administration, Office of Integrated Analysis and Forecasting, Washington, DC.
110. Elliott, D.C., Fitzpatrick, S.W., Bozell, J.J. et al. (1999). Production of levulinic acid and use as a platform chemical for derived products, in Overend, R.P. and Chornet, E., Eds., Biomass: A Growth Opportunity in Green Energy and Value-Added Products, Proceedings of the Fourth Biomass Conference of the Americas, Elsevier Science, Oxford, UK, pp. 595-600.
111. EPRI. (1997). Renewable Energy Technology Characterizations, TR-109496, U.S. Department of Energy, Electric Power Research Institute, Washington, DC.
112. Fahey, J. (2001). Shucking petroleum, Forbes Magazine, 168(13), 206-208.
113. Farrell, A.E. and Gopal, A.R. (2008). Bioenergy research needs for heat, electricity, and liquid fuels, MRS Bulletin, 33, 373-387.
114. Friedman, T. (2010). The fat lady has sung, The New York Times, December 12, p. WK8 (http://www. nytimes.com/2010/02/21/opinion/21friedman.html).
115. Gentille, S.B. (1996). Reinventing Energy: Making the Right Choices, American Petroleum Institute, Washington, DC.
116. Goldstein, L., Hedman, B., Knowles, D. et al. (2003). Gas-Fired Distributed Energy Resource Technology Characterizations, NREL/TP-620-34783, Gas Research Institute and National Renewable Energy Laboratory, Washington, DC (www.nrel.gov/docs/fy04osti/34783.pdf).
117. Graham, R., Nelson, R., Sheehan J., Perlack, R., and Wright L. (2007). Current and potential U.S. corn stover supplies, Agronomy Journal, 99, 1-11.
118. Haas, M., McAloon, A., Yee, W., and Foglia, T. (2006). A process model to estimate biodiesel production costs, Bioresource Technology, 97, 671-678.
119. Harrar, E.S. and Harrar, J.G. (1962). Guide to Southern Trees, 2nd ed., Dover, New York.
120. Hileman, B. (2003). Clashes over agbiotech, Chemical & Engineering News, 81, 25-33.
121. Hoffman, J. (2001). BDO outlook remains healthy, Chemical Market Reporter, 259(14), 5.
122. Hughes, E. (2000). Biomass cofiring: economics, policy and opportunities, Biomass and Bioenergy, 19, 457-465.
123. ILSR. (2002). Accelerating the Shift to a Carbohydrate Economy: The Federal Role, Executive Summary of the Minority Report of the Biomass Research and Development Technical Advisory Committee, Institute for Local Self-Reliance, Washington, DC.
124. Kantor, S.L., Lipton, K., Manchester, A., and Oliveira, V. (1997). Estimating and addressing America's food losses, Food Review, 20(1), 3-11.
125. Kargbo, D.M. (2010). Biodiesel production from municipal sewage sludges, Energy Fuels, 24, 2791-2794.
126. Klass, D.I. (1998). Biomass for Renewable Energy, Fuels, and Chemicals, Academic Press, San Diego, CA.
127. Lee, S. (1996). Alternative Fuels, Taylor & Francis, Boca Raton, FL.
128. Lewis, L. (2005). Seaweed to breathe new life into fight against global warming, London Times, May 14.
129. Little, A. (2001). Aggressive Growth in the Use of Bioderived Energy and Products in the United States by 2010: Final Report, U.S. Department of Energy, Washington, DC.
130. Markarian, J. (2003). New additives and basestocks smooth way for lubricants, Chemical Market Reporter, April 28.
131. McDill, S. (2009). Can algae save the world-again? Reuters, February 20 (http://www.reuters.com/ article/2009/02/10/us-biofuels-algae-idUSTRE5196HB20090210?pageNumber=2&virtualBra ndChannel=0).
132. McGraw, L. (1999). Three new crops for the future, Agricultural Research Magazine, 47(2), 17.
133. McKeever, D.B. (1998). Wood residual quantities in the United States, BioCycle: Journal of Composting and Recycling, 39(1), 65-68; as cited in Antares Group, Inc., Assessment of Power Production at Rural Utilities Using Forest Thinnings and Commercially Available Biomass Power Technologies, prepared for the U.S. Department of Agriculture, U.S. Department of Energy, and National Renewable Energy Laboratory, Washington, DC, 2003.
134. McKendry, P. (2002). Energy production from biomass. Part I. Overview of biomass, Bioresource Technology, 83, 37-46.
135. McLaughlin, S.B. and Kzos, L.A. (2005). Development of switchgrass (Pancium virgatum) as a bioenergy feedstock in the United States, Biomass and Bioenergy, 28, 515-535.
136. Miles, T.R., Miles, Jr., T.R., Baxter, L.L., Jenkins, B.M., and Oden, L.L. (1993). Alkali slagging problems with biomass fuels, in First Biomass Conference of the Americas: Energy, Environment, Agriculture, and Industry, Vol. 1, National Renewable Energy Laboratory, Burlington, VT, pp. 406-421.
137. Morey, R.V., Tiffany, D.G., and Hartfield D.L. (2006). Biomass for electricity and process heat at ethanol plants, Applied Engineering in Agriculture, 22, 723-728.
138. Morris, D. (2002). Accelerating the Shift to a Carbohydrate Economy: The Federal Role, Institute for Local Self-Reliance, Washington, DC.
139. Nilles, D. (2005). The Northland's choice, Biodiesel Magazine, August 1 (http://www.biodieselmaga- zine.com/articles/378/the-northlands-choice).
140. NIST. (2007). Appendix D: definitions, in Specifications, Tolerances, and Other Technical Requirements for Weighing and Measuring Devices, NIST Handbook 44, U.S. Department of Commerce, National Institute of Standards and Technology (ts.nist.gov/WeightsAndMeasures/upload/ HB44_07_FullDoc_Rev1_LC.pdf).
141. Parrish, D.J. Fike, J.H. Bransby, D.I., and Samson, R. (2008). Establishing and managing switchgrass as an energy crop, Forage and Grazinglands, February (http://www.plantmanagementnetwork. org/fg/element/sum2.aspx?id=6903).
142. Perlin, J. (2005). A Forest Journey: The Story of Wood and Civilization, Countryman Press, Woodstock, VT.
143. Polagye, B., Hodgson, K., and Malte, P. (2007). An economic analysis of bioenergy options using thinning from overstocked forests, Biomass and Bioenergy, 31, 105-125.
144. Rinehart, L. (2006). Switchgrass as a Bioenergy Crop, National Center for Appropriate Technology, Butte, MT.
145. Rossell, J.B. and Pritchard, J.L.R., Eds. (1991). Analysis of Oilseeds, Fats and Fatty Foods. Elsevier, London.
146. Samson, R. et al. (2008). Developing energy crops for thermal applications: optimizing fuel quality, energy security and GHG mitigation, in Pimental, D., Ed., Biofuels, Solar and Wind as Renewable Energy Systems: Benefits and Risks, Springer Science, Berlin.
147. Sauer, P. (2000). Domestic spearmint oil producers face flat pricing, Chemical Market Reporter, 258(18), 14.
148. Schenk, P., Thomas-Hall, S., Stephens, R., Marx U., Mussgnug, J., Posten, C., Kruse, O., and Hankamer, B. (2008). Second generation biofuels: high-efficiency microalgae for industrial production, BioEnergy Research, 1(1), 20-43.
149. Sedjo, R. (1997). The economics of forest-based biomass supply, Energy Policy, 25(6), 559-566.
150. Silva, B. (1998). Meadowfoam as an alternative crop, AgVentures, 2(4), 28.
151. Sioru, B. (1999). Process converts trash into oil, Waste Age, 30(11), 20.
152. Spellman, F.R. (2009). Handbook of Water and Wastewater Treatment Plant Operations, 2nd ed., CRC Press, Boca Raton, FL.
153. Spellman, F.R. and Whiting, N. (2007). Concentrated Animal Feeding Operations (CAFOs), CRC Press, Boca Raton, FL.
154. Tillman, D. (2000). Biomass cofiring: the technology, the experience, the combustion consequences, Biomass and Bioenergy, 19, 365-384.
155. Uhlig, H. (1998). Industrial Enzymes and Their Applications, John Wiley & Sons, New York.
156. USDA. (2012). World Agricultural Supply and Demand Estimates, U.S. Department of Agriculture, Washington, DC (http://www.usda.gov/oce/commodity/wasde/).
157. USDOE. (2004). Industrial Bioproducts: Today and Tomorrow, U.S. Department of Energy, Washington, DC.
158. USDOE. (2006a). The Bioproducts Industry: Today and Tomorrow, U.S. Department of Energy, Washington, DC.
159. USDOE. (2006b). Breaking the Biological Barriers to Cellulosic Ethanol: A Joint Research Agenda, Report from the December 2005 Workshop, DOE-SC-0095, U.S. Department of Energy, Office of Science, Washington, DC.
160. USDOE. (2007). Understanding Biomass: Plant Cell Walls, U.S. Department of Energy, Washington, DC.
161. USEPA. (1979). Process Design Manual: Sludge Treatment and Disposal, EPA/625 /625/1-79-011, U.S. Environmental Protection Agency, Office of Research and Development, Washington, DC.
162. USEPA. (2004). Overview of biogas technology, in Roos, K.F., Martin, Jr., J.B., and Moser, M.A., Eds., AgSTAR Handbook, U.S. Environmental Protection Agency, Washington, DC (http://www.epa. gov/agstar/documents/chapterl.pdf).
163. USEPA. (2006a). Auxiliary and Supplemental Power Fact Sheet: Microturbines, EPA 832-F-05-014, U.S. Environmental Protection Agency, Washington, DC.
164. USEPA. (2006b). Auxiliary and Supplemental Power Fact Sheet: Viable Sources, EPA 832-F-05-009, U.S. Environmental Protection Agency, Washington, DC.
165. USEPA. (2006c). Biosolids Technology Fact Sheet: Multi-Stage Anaerobic Digestion, EPA/832-F-06-031, U.S. Environmental Protection Agency, Office of Water, Washington, DC.
166. USEPA. (2007a). Fuel Economy Impact Analysis of RFG, U.S. Environmental Protection Agency, Washington, DC (http://www.epa.gov/oms/rfgecon.htm).
167. USEPA. (2007b). Biomass Combined Heat and Power Catalog of Technologies, U.S. Environmental Protection Agency, Washington, DC.
168. USEPA. (2008). Catalog of CHP Technologies, U.S. Environmental Protection Agency, Washington, DC (www.epa.gov/chp/documents/catalog_chptech_full.pdf).
169. Valigra, L. (2000). Tough as soybeans, The Christian Science Monitor, January 20.
170. Wilhelm, W.W., Johnson, J.M.F., Karlen, D.L., and Lightle, D.T. (2002). Corn stover to sustain soil organic carbon further constrains biomass supply, Agronomy Journal, 99, 1665-1667.
171. Wiltsee, G. (1998). Urban Wood Waste Resource Assessment, NREL/SR-570-25918, National Renewable Energy Laboratory, Golden, CO.
172. Wood, M. (2002). Desert shrub may help preserve wood, Agricultural Research Magazine, 50(4), 10-11.
173. EERE. (2011). History of Hydropower, Energy Efficiency & Renewable Energy, U.S. Department of Energy, Washington, DC (http://www1.eere.energy.gov/water/hydro_history.html).
174. EERE. (2012). SunShot Initiative, Energy Efficiency & Renewable Energy, U.S. Department of Energy, Washington, DC (http://www1.eere.Energy.gov/solar/printable_versions/about.html).
175. EIA. (2010). Renewable Energy Annual 2008, Energy Information Administration, U.S. Department of Energy, Washington, DC (ftp://ftp.eia.doe.gov/renewables/060308.pdf).
176. Enger, E., Kormelink, J.R., Smith, B.F., and Smith, R.J. (1989). Environmental Science: The Study of Interrelationships, William C. Brown, Dubuque, IA.
177. Gibilisco, S. (2007). Alternative Energy Demystified, McGraw-Hill, New York.
178. Liebig, J. (1840). Chemistry and Its Application to Agriculture and Physiology, Taylor & Walton, London.
179. Lindeburg, M.R. (1986). Civil Engineering Reference Manual, 4th ed., Professional Publications, San Carlos, CA.
180. LOC. (2009). The World's First Hydroelectric Power Plant, Library of Congress, Washington, DC (http://www.americaslibrary.gov/jb/gilded/jb_gilded_hydro_1.html).
181. March, P.A., Brice, T.A., Mobley, M.H., and Cybularz, J.M. (1992). Turbines for solving the DO dilemma, Hydro Review, 11(1), 30-36.
182. Masters, G.M. (1991). Introduction to Environmental Engineering and Science, Prentice Hall, Englewood Cliffs, NJ.
183. Miller, G.T. (1988). Environmental Science: An Introduction, Wadsworth, Belmont, CA.
184. Nathanson, J.A. (1997). Basic Environmental Technology: Water Supply, Waste Management, and Pollution Control, 2nd ed., Prentice Hall, Upper Saddle River, NJ, pp. 21-22.
185. NREL. (2012). Concentrating Solar Power, National Renewable Energy Laboratory, U.S. Department of Energy, Washington, DC (http://www.nrel.gov/learning/re_csp.html).
186. Searchinger, T. et al. (2008). Use of U.S. croplands for biofuels increases greenhouse gases through emissions from land-use change, Science, 319(5867), 1238-1240.
187. Simon, J.L. (1980). Resources, population, environment: an oversupply of false bad news, Science, 208, 1431-1437.
188. Spellman, F.R. (2008). The Science of Water, 2nd ed., CRC Press, Boca Raton, FL.
189. Spellman, F.R. (2009). Handbook of Water and Wastewater Treatment Plant Operations, 2nd ed., CRC Press, Boca Raton, FL.
190. Spellman, F.R. and Bieber, R.M. (2012). Environmental Health and Science Desk Reference, Government Institutes Press, Lanham, MD.
191. Tovey, N.K. (2005). ENV-2E02 Energy Resources (2004-2005) [lecture], University of East Anglia, Norwich, UK (http://www.uea.ac.uk/~e680/energy/Old_modules/env2e02/env2e02.htm).
192. Turchin, P. (2001). Does population ecology have general laws? Oikos, 94, 17-26.
193. UCS. (2008). Land Use Changes and Biofuels, Union of Concerned Scientists, Cambridge, MA (http://www.ucsusa.org/clean_vehicles/smart-transportation-solutions/cleaner_fuels/ethanol-andother-biofuels/Land-Use-Changes-and-Biofuels.html).
194. USDOE. (2009). Fossil Fuels, U.S. Department of Energy, Washington, DC (http://www.energy.gov/energysources/fossilfuels.htm).
195. USDOE. (2012a). Planning a Microhydropower System, U.S. Department of Energy, Washington, DC (http://energy.gov/energysaver/articles/planning-microhydropower-system).
196. USDOE. (2012b). Microhydropower Systems, U.S. Department of Energy, Washington, DC (http://energy.gov/energysaver/articles/microhydropower-systems).
197. USEPA. (2008). Catalog of CHP Technologies, U.S. Environmental Protection Agency, Washington, DC (www.epa.gov/chp/documents/catalog_chptech_full.pdf).
198. ACUA. (2012). Solar Array Project Fact Sheet, Atlantic County Utilities Authority, Atlantic City, NJ.
199. Baylon, D. and Storm, P. (2008). Comparison of commercial LEED buildings and non-LEED buildings within the 2002-2004 Pacific Northwest commercial building stock, in Proceedings of ACEEE Summer Study on Energy Efficiency in Buildings, American Council for an Energy-Efficient Economy, Washington, DC.
200. Bierman, A. (2007). Photosensors: dimming and switching systems for daylight harvesting, NLPIP Specifier Reports, 11(1), 1-54.
201. Birt, B. and Newsham, G.R. (2009). Post-occupancy evaluation of energy and indoor environment quality in green building: a review, in Proceedings of 3rd International Conference on Smart and Sustainable Built Environments, Delft, The Netherlands, June 15-19.
202. Brookfield, H.C. (1989). Sensitivity to Global Change: A New Task for Old/New Geographers, Norma Wilkinson Memorial Lecture, University of Reading, Reading, UK.
203. Brundtland, G.H. (1987). Our Common Future, Oxford University Press, New York.
204. Brunger, A. and Hollands, K. (1996). Back-of-Plate Heat Transfer in Unglazed Perforated Collectors Operated under Non-Uniform Air Flow conditions, paper presented at the 22nd Annual Conference of the Solar Energy Society of Canada, Inc., Orillia, Ontario, Canada, June 9-10.
205. Calder, W.A. (1996). Size, Function and Life History, Dover, Mineola, NY.
206. Chiras, D.D. (2002). The Solar House: Passive Heating and Cooling, Chelsea Green Publishing Co., White River Junction, VT.
207. Christensen, C., Hancock, E., Barker, G., Kutscher, C., 1990. Cost and Performance Predictions for Advanced Active Solar Concepts. Proceedings of the American Solar Energy Society Annual Meeting, Austin, Texas.
208. Debres, K. (2005). Burgers for Britain: a cultural geography of McDonald's UK, Journal of Cultural Geography, 22(2), 115-139.
209. Dengler, J. and Wittwear, V. (1994). Glazings with granular aerogels, SPIE, 255, 718-727.
210. Duffie, J. and Beckman, W. (1991). Solar Engineering of Thermal Processes, John Wiley & Sons, New York.
211. Dumortier, D. (1997). Evaluation of luminous efficacy models according to sky types and atmospheric conditions, in Proceedings of Lux Europa '97, Ecole Nationale des Travaux Publics de l'Etat, Vaulx-en-Velin, France.
212. EERE. (2006). Solar Energy Technologies Program: Overview and Highlights, Energy Efficiency & Renewable Energy, U.S. Department of Energy, Washington, DC.
213. EERE. (2011). History of Hydropower, Energy Efficiency & Renewable Energy, U.S. Department of Energy, Washington, DC (http://www1.eere.energy.gov/water/hydro_history.html).
214. EERE. (2012). SunShot Initiative, Energy Efficiency & Renewable Energy, U.S. Department of Energy, Washington, DC (http://www1.eere.Energy.gov/solar/printable_versions/about.html).
215. Enermodal Engineering, Ltd. (1995). Performance of the Perforated-Plate/Canopy Solarwall at GM Canada, Oshawa, Energy Technology Branch, Department of Natural Resources, Ottawa, ON.
216. Fenchel, T. (1974). Intrinsic rate of natural increase: the relationship with body size, Oecologia, 14, 317-326.
217. Fontoynont, M., Place, W., and Bauman, P. (1984). Impact of electric lighting efficiency on the energy saving potential of daylighting from roof monitors, Energy and Buildings, 6(4), 375-386.
218. Galasiu, A.D., Atif, M.R., MacDonald, R.A. (2004). Impact of window blinds on daylight-linked dimming and automatic on/off lighting controls, Solar Energy, 76(5), 523-544.
219. Galasiu, A.D., Newsham, G.R., Suvagau, C., and Sander, D.M. (2007). Energy saving lighting control system for open-plan offices: a field study, Leukos, 4(1), 7-29.
220. Gunnewick, L. (1994). An Investigation of the Flow Distribution Through Unglazed Transpired- Plate Solar Air Heaters, master's thesis, Department of Mechanical Engineering, University of Waterloo, Canada.
221. Hanson, B.J. (2004). Energy Power Shift: Benefiting from Today's New Technologies, Lakota Scientific Press, Maple, WI.
222. Hardin, G. (1986). Cultural carrying capacity: a biological approach to human problems, BioScience, 36, 599-606.
223. Heschong, L. and McHugh, J. (2003). A report on integrated design of commercial ceiling, PIER.
224. Heschong, L. and McHugh, J. (2006). Skylights: calculating illumination levels and energy impacts, Journal of Illuminating Engineering Society, 29(1), 90-100.
225. Hinrichs, R.A. and Kleinbach, M.H. (2006). Energy: Its Use and the Environment, 4th ed., Thomson Learning, New York.
226. Holdren, J.P. (1991). Population and the energy problem, Population and the Environment, 12, 231-255.
227. Howlett, O. et al. (2006). Sidelighting photocontrols field study, in Proceedings of ACEEE Summer Study on Energy Efficiency in Buildings, Pacific Grove, CA, August 13-18, pp. 3-148-3-159.
228. Hubbell, S.P. and Johnson, L.K. (1977). Competition and nest spacing in a tropical stingless bee community, Ecology, 58, 949-963.
229. James J. Hirsch & Assoc. (2004). DOE 2.2 Building Energy Use and Cost Analysis Program. Vol. 3. Topics, Lawrence Berkeley National Laboratory, University of California, Berkeley.
230. James J. Hirsch & Assoc. (2009). eQuest Introductory Tutorial, Version 3.63, James J. Hirsch & Assoc., Camarillo, CA.
231. Janak, M. (1997). Coupling building energy and lighting simulation, in Proceedings of the Fifth International IBPSA Conference, Prague, September 8-10.
232. Janak, M. and Macdonald, I. (1999). Current state-of-the-art of integrated thermal and lighting simulation and future issues, in Proceedings of the Sixth International IBPSA Conference, Kyoto, Japan, September 13-15.
233. Lederer, E.M. (2008). UN says half the world's population will live in urban areas by end of 2008, Associated Press, February 26 (http://www.iht.com/aritcles/ap/2008/02/26/news/UN-GEN- UB-Growing-Cities.php).
234. Krebs, R.E. (2001). Scientific Laws, Principles and Theories, Greenwood Press, Westport, CT.
235. Kuhlken, R. (2002). Intensive agricultural landscapes of Oceania, Journal of Cultural Geography, 19(2), 161-195.
236. Kutscher, C.F. (1992). An Investigation of Heat Transfer for Air Flow Through Low Porosity Perforated Plates, doctoral thesis, University of Colorado, Boulder.
237. Kutscher, C.F., Christensen, C., and Barker, G. (1993). Unglazed transpired solar collectors: heat loss theory, ASME Journal of Solar Energy Engineering, 115, 182-188.
238. Lauoadi, A. and Aresnault, C. (2004). Validation of Skyvision, IRC-RR-167, National Research Council, Washington, DC.
239. Lauoadi, A. and Atif, M.R. (1999). Predicting optical and thermal characteristics of transparent single-glazed domed skylights, ASHRAE Transactions, 105(2), 325-333.
240. LOC. (2009). The World's First Hydroelectric Power Plant, Library of Congress, Washington, DC (http:// www.americaslibrary.gov/jb/gilded/jb_gilded_hydro_1.html).
241. Lund, J.W. (2007). Characteristics, development and utilization of geothermal resources, Institute of Technology, 28(2), 1-9.
242. Moore, F. (1991). Concepts and Practice of Architectural Daylighting, John Wiley & Sons, New York.
243. Newsham, G.R. (2004). American National Standard Practice for Office Lighting, RP-1, ANSI/IESNA, Washington, DC.
244. NREL. (2010). Concentrating Solar Power, National Renewable Energy Laboratory, Washington, DC (http://www.nrel.gov/csp/pdfs/capability_factsheet_overview_of_csp_capabilities.pdf).
245. NREL. (2012a). Dynamic Maps, GIS Data, & Analysis Tools: Solar Maps, National Renewable Energy Laboratory, U.S. Department of Energy, Washington, DC (http://www.nrel.gov/gis/solar. html#csp).
246. NREL. (2012b). Learning About Renewable Energy: Concentrating Solar Power Basics, National Renewable Energy Laboratory, U.S. Department of Energy, Washington, DC (http://www.nrel.gov/learn- ing/re_csp.html).
247. NREL. (2012c). Concentrating Solar Power Research, National Renewable Energy Laboratory, U.S. Department of Energy, Washington, DC (http://www.nrel.gov/csp/).
248. O'Connor, J, Lee, E., Rubinstein, L.E., and Selkowitz, S. (1997). Tips for Daylighting with Windows, Lawrence Berkeley National Laboratory, University of California, Berkeley.
249. Patel, M. (1999). Wind and Solar Power Systems, CRC Press, Boca Raton, FL.
250. Perez-Blanco, H. (2009). The Dynamics of Energy: Supply, Conversion, and Utilization, CRC Press, Boca Raton, FL.
251. Place, W. et al. (1984). The predicted impact of roof aperture design on the energy performance of office buildings, Energy and Building, 6(4), 361-373.
252. Reid, W. et al. (1988). Bankrolling Successes, Environmental Policy Institute and National Wildlife Federation, Washington, DC.
253. Richardson, J.M., Ed. (1982). Making It Happen: A Positive Guide to the Future, U.S. Association for the Club of Rome, Washington, DC.
254. Rubinstein, F., Ward, G., and Verderber, R. (1989). Improving the performance of photo-electrically controlled lighting systems, Journal of the Illuminating Engineering Society, 18(1), 70-94.
255. Searchinger, T. et al. (2008). Use of U.S. croplands for biofuels increases greenhouse gases through emissions from land-use change, Science, 319(5867), 1238-1240.
256. Shelly, P. (2006). City of Myrtle Beach cleaned up by "bees, " South Carolina Energy Office Newsletter, December 1 (news.medoraco.com/city-of-myrtle-beach-cleaned-up-by-bees).
257. Simon, J.L. (1980). Resources, population, environment: an oversupply of false bad news, Science, 208, 1431-1437.
258. UCS. (2008). Land-Use Changes and Biofuels, Fact Sheet, Union of Concerned Scientists, Cambridge, MA.
259. USDOE. (1998). Solar Buildings: Transpired Air Collectors, U.S. Department of Energy, Washington, DC (http://www1.eere.energy.gov/femp/pdfs/FTA_trans_coll.pdf).
260. USDOE. (2006). Geothermal Technologies Program: A History of Geothermal Energy in the United States, U.S. Department of Energy, Washington, DC (http://www1.eere.energy.gov/geothermal/his- tory.html).
261. USDOE. (2008). Concentrating Solar Power Commercial Application Study: Reducing Water Consumption of Concentrating Solar Power Electricity Generation, U.S. Department of Energy, Washington, DC (www1.eere.energy.gov/solar/pdfs/csp_water_study.pdf).
262. USDOE. (2009a). Linear Concentrators Research and Development, U.S. Department of Energy, Washington, DC (http://www1.eere.energy.gov/solar/linear_concentrator_rnd.html).
263. USDOE. (2009b). Thermal Storage Research and Development, U.S. Department of Energy, Washington, DC (http://www1.eere.energy.gov/solar/sunshot/index.html).
264. USDOE. (2010). Dish/Engine Systems for Concentrating Solar Power, U.S. Department of Energy, Washington, DC (http://www.eere.energy.gov/basics/renewable_energy/dish_engine.html).
265. USDOE. (2012). Energy Sources: Fossil, U.S. Department of Energy, Washington, DC (http://energy. gov/science-innovation/energy-sources/fossil).
266. USEPA. (2007). Auxiliary and Supplemental Power Fact Sheet: Solar Power, U.S. Environmental Protection Agency, Washington, DC.
267. USEPA. (2008). Catalog of CHP Technologies, U.S. Environmental Protection Agency, Washington, DC (www.epa.gov/chp/documents/catalog_chptech_full.pdf).
268. USEPA. (2011). The Science of Ozone Layer Depletion, U.S. Environmental Protection Agency, Washington, DC (http://www.epa.gov/ozone/science/index.html).
269. Vitousek, P.M., Ehrlich, A.H., and Matson, P.A. (1986). Human appropriation of the products of pho-tosynthesis, BioScience, 36, 368-373.
270. Volterra, V. (1926). Variazioni e fluttuazioni del numero d'indivudui in specie animali conviventi, Mem. Accad. Lincei, 2(Ser. VI), 31-113.
271. World Commission on Environment and Development. (1987). Our Common Future, Oxford University Press, New York.
272. Wilson, E.O. (2001). The Future of Life, Knopf, New York.
273. Winkelman, F. and Selkowitz, S. (1985). Daylighting simulation in the DOE-2 building energy analysis program, Energy and Buildings, 8(4), 271-286.
274. ACUA. (2012). Solar Array Project Fact Sheet, Atlantic County Utilities Authority, Atlantic City, NJ.
275. Alternative Energy. (2010). Wind Turbines, http://www.alternative-energy-news.info/technology/wind-pworer/wind-turbines/.
276. Archer, C. and Jacobson, M.Z. (2004). Evaluation of Global Wind Power, Department of Civil and Environmental Engineering, Stanford University, Stanford, CA.
277. Betz, A. (1966). Introduction to the Theory of Flow Machines (D.G. Randall, trans.), Pergamon Press, Oxford.
278. Burton, T., Sharpe, D., Jenkins, N., and Bossanyi, E. (2001). Wind Energy Handbook, John Wiley & Sons, New York.
279. EERE. (2006a). Wind & Water Power Program, Energy Efficiency & Renewable Energy, U.S. Department of Energy, Washington, DC (http://www1.eere.energy.gov/windandhydro/).
280. EERE. (2006b). How Wind Turbines Work, Energy Efficiency & Renewable Energy, U.S. Department of Energy, Washington, DC (http://www1.eere.energy.gov/Windandhydro/wind_how.html).
281. EERE. (2007). Annual Report on U.S. Wind Power Installation, Cost, and Performance Trends: 2006, DOE/GO-102007-2433, Energy Efficiency & Renewable Energy, U.S. Department of Energy, Washington, DC (www.nrel.gov/docs/fy07osti/41435.pdf).
282. EERE. (2012). Wind Program, Energy Efficiency & Renewable Energy, U.S. Department of Energy, Washington, DC (http://www1.eere.energy.gov/wind/small_wind_system_faqs.html).
283. Hanson, B.J. (2004). Energy Power Shift, Lakota Scientific Press, Maple, WI.
284. Jespersen, B. (2007). Wind power to fuel waste plant, Morning Sentinel, October 25.
285. Khaligh, A. and Onar, O.C. (2010). Energy Harvesting, Taylor & Francis, Boca Raton, FL.
286. Nicholls, B. and Racey, P.A. (2007). Bats avoid radar installations: could electromagnetic fields deter bats from colliding with wind turbines? PLoSONE, 2(3), e297.
287. RReDC. (2010). Wind Energy Resource Atlas of the United States, Renewable Resource Data Center, National Renewable Energy Laboratory, Washington, DC (http://rredc.nrel.gov/wind/pubs/atlas/).
288. Seifert, H. (2004). Technical requirements for rotor blades operating in cold climates, DEWI Magazine, 24.
289. Serway, R.A. and Jewett, J.W. (2004). Physics for Scientists and Engineers, 6th ed., Thomson/Brooks/Cole, New York.
290. Town of Browning. (2012). Wind Power for the Wastewater Treatment Plant, Town of Browning, Montana (http://www.browningmontana.com/wind.html).
291. Tripler, P. (2004). Physics for Scientists and Engineers. Vol. 1. Mechanics, Oscillations and Waves, Thermodynamics, 5th ed., W.H. Freeman, New York.
292. Tripler, P. and Llewellyn, R. (2002). Modern Physics, 4th ed., W.H. Freeman, New York.
293. USEPA. (2007). Auxiliary and Supplemental Power Fact Sheet: Wind Turbines, EPA 832-F-05-013, U.S. Environmental Protection Agency, Washington, DC.
294. USEPA. (2008). Catalog of CHP Technologies, U.S. Environmental Protection Agency, Washington, DC (www.epa.gov/chp/documents/catalog_chptech_full.pdf).
295. USEPA. (2011). History of Wind Energy, U.S. Environmental Protection Agency, Washington, DC (http://www1.eere.energy.gov/wind/wind_history.html).
296. White, F.M. (1988). Fluid Mechanics, 2nd ed., McGraw-Hill, Singapore.
297. Wind Energy Programmatic EIS. (2009). Wind Energy Basics, Wind Energy Development Programmatic Environmental Impact Statement, U.S. Department of the Interior Bureau of Land Management and Argonne National Laboratory, Washington, DC (http://windeis.anl.gov/guide/basics/ index.cfm).
298. Brogdon, J., McEntyre, C., Whitehead, L., and Mitchell, J. (2008). Enhancing the energy efficiency of wastewater aeration, in Proceedings of the Water Environment Federation (WEFTEC 2008), Water Environment Federation, Alexandria, VA, pp. 444-451.
299. Burton, F.L. (1996). Water and Wastewater Industries: Characteristics and Energy Management Opportunities, Report CR106941, prepared for Electric Power Research Institute, Palo Alto, CA, by Burton Environmental Engineering, Los Altos, CA.
300. Cantwell, J., Newton, J., Jenkins, T., Cavagnaro, P., and Kalwara, C. (2009). Running an Energy Efficient Wastewater Utility: Modifications That Can Improve Your Bottom Line [webcast], Water Environment Federation, Alexandria, VA.
301. Copp, J.B., Spanjers, H., and Vanrolleghem, P.A. (2002). Respirometry in Control of the Activated Sludge Process: Benchmarking Control Strategies, Scientific and Technical Report No. 11, IWA Publishing, London.
302. Cormen, T.H., Leiserson, C.E., Rivest, R.L., and Stein, C. (2002). Introduction to Algorithms, 2nd ed., Prentice-Hall, New Delhi.
303. EERE. (1996). Fact Sheet: Buying an Energy-Efficient Electric Motor, DOE/GO-10096-314, Energy Efficiency and Renewable Energy, U.S. Department of Energy, Washington, DC (www1.eere. energy.gov/industry/bestpractices/pdfs/mc-0382.pdf).
304. EERE. (2005). Energy Tips-Motor Systems Tip Sheet #2: Estimating Motor Efficiency in the Field, DOE/GO-102005-2021, Energy Efficiency and Renewable Energy, U.S. Department of Energy, Washington, DC (http://www1.eere.energy.gov/manufacturing/tech_deployment/pdfs/ estimate_motor_efficiency_motor_systemts2.pdf).
305. EERE. (2005). Performance Spotlight: Onondaga County Department of Water Environment Protection: Process Optimization Saves Energy at Metropolitan Syracuse Wastewater Treatment Plant, DOE/ GO-102005-2136, Energy Efficiency and Renewable Energy, U.S. Department of Energy, Washington, DC (http://www1.eere.energy.gov/manufacturing/tech_deployment/pdfs/ onondaga_county.pdf).
306. EERE. (2005). Case Study-The Challenge: Improving Sewage Pump System Performance, Energy Efficiency and Renewable Energy, U.S. Department of Energy, Washington, DC (http://www1. eere.energy.gov/manufacturing/tech_deployment/case_study_sewage_pump.html).
307. EERE. (2008). New motor technologies boost system efficiency, Energy Matters, Summer (http:// www1.eere.energy.gov/manufacturing/tech_deployment/summer2008.html#a284).
308. EERE. (2011). Ultra-Efficient and Power-Dense Electric Motors, Energy Efficiency and Renewable Energy, U.S. Department of Energy, Washington, DC (http://www1.eere.energy.gov/indus- try/intensiveprocesses/pdfs/electric_motors.pdf).
309. EERE. (2012). Case Study-The Challenge: Improving Sewage Pump System Performance, Town of Trumbull, Energy Efficiency and Renewable Energy, U.S. Department of Energy, Washington, DC (http:// www1.eere.energy.gov/manufacturing/tech_deployment/case_study_sewage_pump.html).
310. Efficiency Partnership. (2001). Water/Wastewater Case Study: Central Contra Costa Sanitary District, Flex Your Power, http://www.fypower.org/pdf/CS_Water_CCCSD.pdf.
311. Efficiency Partnership. (2009). Water/Wastewater Case Study: South Tahoe Public Utility District, Flex Your Power, http://www.fypower.org/pdf/CS_South_Tahoe.pdf.
312. EPRI. (1998). Quality Energy Efficiency Retrofits for Wastewater Systems, CR-109081, Electrical Power Research Institute, Charlotte, NC.
313. Fillos, J. and Ramalingam, K. (2005). Evaluation of Anoxic Zone Mixers at the Bowery Bay WPCP, New York City Department of Environmental Protection, New York.
314. Gass, J.V., Black & Veatch. (2009). Scoping the Energy Savings Opportunities in Municipal Wastewater Treatment, presented at CEE Partner's Meeting, September 29, 2009 (www.cee1.org/cee/ mtg/09-09mtg/files/WWWGass.pdf).
315. Gidugu, S., Oton, S., and Ramalingam, K. (2010). Thorough mixing versus energy consumption, New England Water Environment Association Journal, 44(1).
316. Ginzburg, B., Peeters, J., and Pawloski, J. (2008). On-line fouling control for energy reduction in membrane bioreactors, in Proceedings of the Water Environment Federation, Membrane Technology 2008, Water Environment Federation, Alexandria, VA, pp. 514-524.
317. Gusfield, D. (1997). Algorithms on Strings, Trees, and Sequences: Computer Science and Computational Biology, Cambridge University Press, Cambridge, UK.
318. IEEE. (1990). Recommended Practices for Electric Power Distribution for Industrial Plants (IEEE Red Book), ANSI/IEEE Std 141-1986, Institute of Electrical and Electronic Engineers, New York.
319. Jones, T. and Burgess, J. (2009). Municipal Water-Wastewater Breakout Session: High Speed "Turbo" Blowers, paper presented at Consortium for Energy Efficiency Program Meeting, June 3, 2009 (www.cee1.org/cee/mtg/06-09mtg/files/WWW1JonesBurgess.pdf).
320. Lafore, R. (2003). Data Structures and Algorithms in Java, 2nd ed., Sams Publishing, Indianapolis, IN.
321. Larson, L. (2010). A Digital Control System for Optimal Oxygen Transfer Efficiency, Report CEC-500-2009076, California Energy Commission, Sacramento, CA (www.energy.ca.gov/2009publications/ CEC-500-2009-076/).
322. Leong, L.Y.C., Kup, J., and Tang, C. (2008). Disinfection of Wastewater Effluent-Comparison of Alternative Technologies, Water Environment Research Foundation, Alexandria, VA.
323. Lim, A.L. and Bai, R. (2003). Membrane fouling and cleaning in microfiltration of activated sludge wastewater, Journal of Membrane Science, 216, 279-290.
324. Littleton, H.X., Daigger, G.T., Amad, S., and Strom, P.F. (2009). Develop control strategy to maximize nitrogen removal and minimize operation cost in wastewater treatment by online analyzer, in Nutrient Removal 2009 Conference Proceedings, Water Environment Federation, Alexandria, VA.
325. Liu, W., Lee, G., Schloth, P., and Serra, M. (2005). Side by side comparison demonstrated a 36% increase of nitrogen removal and 19% of aeration requirements using a feed forward online optimization system, in Proceedings of 2005 WEFTEC Annual Conference, Water Environment Federation, Alexandria, VA.
326. Love, N.G. et al. (2000). A Review and Needs Survey of Upset Early Warning Devices, Report 99-WWF-2, Water Environment Research Foundation, Alexandria, VA.
327. Mitchell, T.M. (1997). Machine Learning, McGraw-Hill, New York.
328. NEMA. (2006). NEMA Premium™: Product Scope and Nominal Efficiency Levels, National Electrical Manufacturers Association, Rosslyn, VA.
329. Peeters, J., Pawloski, J., and Noble, J. (2007). The evolution of immersed hollow fiber membrane aeration for MBR, in Proceedings of IWA 4th International Membrane Technologies Conference, Harrogate, UK, May 15-17.
330. Peng, J., Qiu, Y., and Gehr, R. (2005). Characterization of permanent fouling on the surfaces of UV lamps used for wastewater disinfection, Water Environment Research, 77(4), 309-322.
331. PG&E. (2001). Energy Benchmarking Secondary Wastewater Treatment and Ultraviolet Disinfection Processes at Various Municipal Wastewater Treatment Facilities, Pacific Gas & Electric Company, San Francisco, CA.
332. Phillips, D.L. and Fan, M.M. (2005). Automated Channel Routing to Reduce Energy Use in Wastewater UV Disinfection Systems, University of California, Davis.
333. Poynton, C. (2003). Digital Video and HDTV Algorithms and Interfaces, Morgan Kaufmann, Burlington, MA.
334. SAIC. (2006). Water & Wastewater Industry Energy Best Practice Guidebook, prepared for Focus on Energy™ by Science Applications International Corporation, McLean, VA.
335. Salveson, A., Wade, T., Bircher, K., and Sotirakos, B. (2009). High Energy Efficiency and Small Footprint with High-Wattage Low Pressure UV Disinfection for Water Reuse, paper presented at the Ozone and Ultraviolet Technology Conference and Exposition on North American Water, Wastewater, and Reuse Applications, Cambridge, MA, May 4-6.
336. Spellman, F.R. (2009). Handbook of Water and Wastewater Treatment Plant Operations, 2nd ed., CRC Press, Boca Raton, FL.
337. Spellman, F.R. and Drinan, J. (2001). Fundamentals of Pumping, CRC Press, Boca Raton, FL.
338. Tata, P., Patel, K., Soszynski, S., Lue-Hing, C., Carns, K., and Perkins, D. (2000). Potential for the use of on-line respirometry for the control of aeration, in Proceedings of2000 WEFTEC Annual Conference, Water Environment Federation, Alexandria, VA.
339. Thumann, A. and Dunning, S. (2008). Plant Engineers and Managers Guide to Energy Conservation, 9th ed., Fairmont Press, New York.
340. Trillo, I., Jenkins, T., Redmon, D., Hilgart, T., and Trillo, J. (2004). Implementation of feedforward aeration control using on-line offgas analysis: the Grafton WWTP experience, in Proceedings of 2004 WEFTEC Annual Conference, Water Environment Federation, Alexandria, VA.
341. USDOE. (1996). Fact Sheet: Replacing an Oversized and Underloaded Electric Motor, DOE/GO-10096-287, U.S. Department of Energy, Washington, DC.
342. USEPA. (1999). Wastewater Technology Fact Sheet: Fine Bubble Aeration, EPA 832-F-99-065, U.S. Environmental Protection Agency, Washington, DC (water.epa.gov/scitech/wastetech/ upload/2002_06_28_mtb_fine.pdf).
343. USEPA. (1999). Wastewater Technology Fact Sheet: Ultraviolet Disinfection, EPA 832-F-99-064, U.S. Environmental Protection Agency, Washington, DC (water.epa.gov/scitech/wastetech/ upload/2002_06_28_mtb_uv.pdf).
344. USEPA. (2003). Technology Transfer Network Support Center for Regulatory Air Models, U.S. Environmental Protection Agency, Washington, DC (http://www.epa.gov/ttn/scram/).
345. USEPA. (2008). Ensuring a Sustainable Future: An Energy Management Guidebook for Wastewater and Water Utilities, EPA 832-R-08-002, U.S. Environmental Protection Agency, Washington, DC.
346. USEPA. (2010). Evaluation of Energy Conservation Measures for Wastewater Treatment Facilities, EPA 832- R-10-005, U.S. Environmental Protection Agency, Washington, DC, pp. 4-11, 6-4, 6-12.
347. Wagner, M. and von Hoessle, R. (2004). Biological coating of EPDM-membranes of fine bubble diffusers, Water Science and Technology, 50(7), 79-85.
348. Wallis-Lage, C.L. and Levesque, S.D. (2009). Cost Effective & Energy Efficient MBR Systems, paper presented at Singapore International Water Week, June 22-26 (bvwater.files.wordpress. com/2009/05/abstract_siw09_wallis-lage.pdf).
349. Weerapperuma, D. and de Silva, B. (2004). On-line analyzer applications for BNR control, in Proceedings of2004 WEFTEC Annual Conference, Water Environment Federation, Alexandria, VA.
350. WEF. (2009). Energy Conservation in Water and Wastewater Facilities, Manual of Practice (MOP) No. 32, McGraw Hill, New York.
351. WEF/ASCE/EWRI. (2006). Biological Nutrient Removal (BNR) Operation in Wastewater Treatment Plants, Manual of Practice (MOP) No. 30, McGraw Hill, New York.
352. WEF/ASCE/EWRI. (2010). Design of Municipal Wastewater Treatment Plants, 5th ed., Manual of Practice (MOP) No. 8, ASCE Manuals and Reports on Engineering Practice No. 76, McGraw Hill, New York.