Synthesis and characterization of polyurethane–organoclay nanocomposites based on renewable castor oil polyols

Polymer Bulletin

Volumn 72, Issue 1, 2015, Pages 1-17

  Alaa, M A ^a,b   Yusoh, Kamal ^a   Hasany, S F ^a  

^a UNIVERSITY MALAYSIA PAHANG   (Malaysia)

^b UNIVERSITY OF TECHNOLOGY   (Iraq)

Author keywords

Castor oil; Cloisite 30B; Physico chemical behaviors; Polypropylene glycol polyol; Renewable polyols

Indexed keywords

ADHESIVES; FOURIER TRANSFORM INFRARED SPECTROSCOPY; GLYCOLS; NANOCOMPOSITES; ORGANOCLAY; POLYOLS; POLYPROPYLENE OXIDES; POLYPROPYLENES; POLYURETHANES; TENSILE STRENGTH; VEGETABLE OILS;

AUTOMOTIVE APPLICATIONS; CASTOR OIL; CASTOR OIL-BASED POLYURETHANES; CLOISITE 30B; ORGANOCLAY NANOCOMPOSITES; PHYSICO-CHEMICALS; POLYPROPYLENE GLYCOL; SYNTHESIS AND CHARACTERIZATIONS;

SCANNING ELECTRON MICROSCOPY;

EID: 84920427991     PISSN: 01700839     EISSN: 14362449     Source Type: Journal    
DOI: 10.1007/s00289-014-1255-6     Document Type: Article

References (56)

1. Stefan O (2013) Effects of guar gum content on structure and properties of multi-crosslinked polyurethane composite films. J Compos Elsevier 44:76–83
2. Yusoh K, Jin J, Song M (2010) Subsurface mechanical properties of polyurethane/organoclay nanocomposite thin films studied by nanoindentation. J Prog Org Coat Elsevier 67:220–224
3. Akintayo CO, Akintayo ET, Ziegler T, Babalola BM (2013) Newly developed epoxy-polyol and epoxy-polyurethane from renewable resources. Br J Appl Sci Technol 3:984–993
4. Nihal S, Emel O (2007) Thermal characteristics of polyurethane foams incorporated with phase change materials. J Thermochim Acta Sci Direct 454:90–98
5. Judit EP, Elizabeth AF, Goy TL, Sara EP, Michelle ME, Steven PS, Marta P, Miros F, Piotr P, Krystal L (2010) A nanostructured carbon-reinforced polyisobutylene-based thermoplastic elastomer. J Biomater Sci Direct 31:2477–2488
6. Bela PJ, Kristof B, Zsuzsa T, Jozsef V, Lajos B, Stephan H, Tamas D, Bela P (2008) Nanophase separation in segmented polyurethane elastomers: effect of specific interactions on structure and properties. J Eur Polym Sci Direct 44:2431–2438
7. Jose MH, Eva M, John CL, Steven SC (2009) Transport properties in polyurethane/clay nanocomposites as barrier materials: effect of processing conditions. J Membr Sci 337:208–214
8. Sponton M, Casisa N, Mazo P, Raud B, Simonetta A, Rios L, Estenoz D (2013) Biodegradation study by Pseudomonas sp. of flexible polyurethane foams derived from castor oil. J Int Biodeterior Biodegrad 85:85–94
9. Laurent F, Houria K, Mylene S, Olivia G, Christine JD, Vincent L, Jean JR (2013) The use of renewable feedstock in UV-curable materials—a new age for polymers and green chemistry. J Prog Polym Sci 38:932–962
10. Xiaohua K, Guoguang L, Hong Q, Jonathan MC (2013) Preparation and characterization of high-solid polyurethane coating systems based on vegetable oil derived polyols. J Prog Org Coat 76:1151–1160
11. Shida M, Ping W, Zhiguo S, Songping Z (2014) Vegetable-oil-based polymers as future polymeric biomaterials. J Acta Biomater 10:1692–1704
12. Eid AI, Motawie AM, Sadek EM (2011) Synthesis and characterization of polyurethane coatings based on soybean oil–polyester polyols. J Egypt J Pet 20:1–8
13. Hadi B, Hamid Y, Shahram MA, Mohammad AS, Seyyed NE (2013) Synthesis and characterization of antibacterial polyurethane coatings from quaternary ammonium salts functionalized soybean oil based polyols. J Mater Sci Eng 33:153–164
14. Hamid Y, Pejman HT (2006) Preparation and properties of novel biodegradable polyurethane networks based on castor oil and poly (ethylene glycol). J Polym Degrad Stabil 92:480–489
15. Ivan S.R, Zoran D.B, Berta H, Katalin M.S, Jaroslava B.S, Nada L, Miodrag K (2012) Thermal stability of polyurethane materials based on castor oil as polyol component. J Therm Anal Calorim. doi:10.1007/s10973-012-2497-x
16. Xiaohua K, Guoguang L, Jonathan MC (2011) Characterization of canola oil based polyurethane wood adhesives. Int J Adhes Adhes 31:559–564
17. Xiaohua K, Guoguang L, Jonathan MC (2012) Novel polyurethane produced from canola oil based poly (ether ester) polyols: synthesis characterization and properties. Eur Polym J 48:2097–2106
18. Guan ST, Takashi N, Hyoe H, Tatsuko H (2011) Polyurethane composites derived from glycerol and molasses polyols filled with oil palm empty fruit bunches studied by TG and DMA. J Thermochim Acta 525:190–196
19. Khoon PA, Choy SL, Sit FC, Cheng HC (2013) Synthesis of palm oil-based polyester polyol for polyurethane adhesive production. J Appl Polym Sci. doi:10.1002/app.39967
20. Hatice M, Michael AR (2010) Castor oil as renewable resource for the chemical industry. Eur J Lipid Sci Technol 112:10–30
21. Corcuera MA, Rueda L, Fernandez BA, Arbelaiz A, Marieta C, Mondragon I, Eceiza A (2010) Microstructure and properties of polyurethanes derived from castor oil. J Polym Degrad Stabil 95:2175–2184
22. Eleni P, Milena GM, Stephen C (2008) Reaction kinetic of polyurethane formation using a comercial oligomeric diisocyanate resin studied by calorimetric and rheological methods. J Macromol Chem Phys 209:2302–2311
23. Hablot E, Zheng D, Bouquey M, Averous L (2008) Polyurethanes based on castor oil: kinetics, chemical, mechanical and thermal properties. J Macromol Mater Eng Polym Sci Technol Gen 293:922–929
24. Ayesha K, Sonia Z, Muhammad IS (2013) High performance segmented polyurethanes derived from a new aromatic diisocyanate and polyol. J Polym Degrad Stabil 98:368–376
25. Caoa X, Lee LJ, Widyab T, Macosko C (2005) Polyurethane/clay nanocomposites foams: processing, structure and properties. J Polym 46:775–783
26. Ling Z (2008) Structure-property relationship of polyurethane flexible foam made from natural oil polyols, PhD Thesis. Doctor of philosophy in chemical engineering and material science, University of Minnesota
27. Thouzeau C, Henneuse C, Sclavons M, Devaux J, Soulestin J, Stoclet G (2013) Emission of volatile organic compounds during processing and use of organoclay based nanocomposites. J Polym Degrad Stabil 98:557–565
28. Gautam D, Ranjan DK, Harekrishna D, Alok KB, Niranjan K (2013) Biodegradation, cytocompatability and performance studies of vegetable oil based hyperbranched polyurethane modified biocompatible sulfonated epoxy resin/clay nanocomposites. J Prog Org Coat 76:1103–1111
29. Kaushik A, Dheeraj A, Vipin S (2011) Synthesis and characterization of organically modified clay/castor oil based chain extended polyurethane nanocomposites. J Compos 42:1534–1541
30. Krushna CP, Nayak PL (2012) Synthesis and characterization of polyurethane nanocomposite from castor oil-hexamethylene diisocyanate (HMDI). J Pelagia Res Libr Adv Appl Sci Res 5:3045–3052
31. Swagatika M, Nayak PL, Guru B, Nanda CP (2010) Synthesis and characterization of polyurethane nanocomposites for biomedical applications, International Conference on Environment. J Energy Dev (from Stockholm to Copenhagen and beyond) 2:403–412
32. dos Santos DJ, Tavares LB, Batalha GF (2012) Mechanical and physical properties investigation of polyurethane material obtained from renewable natural source. J Achiev Mater Manuf Eng 54:211–217
33. Jose M, Cervantes U, Juan V, Cauich R, Humberto VT, Luis F, Garfias M, Donald RP (2009) Thermal degradation of commercially available organoclays studied by TGA-FTIR. J Polym Degrad Stabil 457:92–102
34. Cervantes U, Cauich RJ, Vzquez TH, Garfias ML, Paul DR (2007) Thermal degradation of commercially available organoclays studied by TGA-FTIR. J Thermochim Acta 457:92–102
35. Saha C, Chaki TK, Singha NK (2013) Synthesis and characterization of elastomeric polyurethane and PU/clay nanocomposites based on an aliphatic diisocyanate. J Appl Polym Sci. doi:10.1002/APP.39534 (1–7)
36. Mohanty D, Biswal SK, Palve YP, Nayak PL (2012) Synthesis and characterization of polylactic acid/cloisite 30B (MMT) nanocomposite for controlled release of anticancer drug curcumin. Int J Pharm Res Allied Sci 1(4):63–70
37. Lee LJ, Zeng C, Cao X, Han X, Shen J, Xu G (2005) Polymer nanocomposite foams. J Compos Sci Technol 65:2344–2363
38. Semenzato S, Lorenzetti A, Modesti M, Ugel E, Hrelja D, Besco S, Michelin RA, Sassi A, Facchin G, Zorzi F, Bertan R (2009) A novel phosphorus polyurethane foam/montmorillonite nanocomposite: preparation, characterization and thermal behavior. J Appl Clay Sci 44:35–42
39. Tjong SC (2006) Structural and mechanical properties of polymer nanocomposites. J Mater Sci Eng 53:173–197
40. Dimitry OIH, Ibrahim ZA, Ismail EA, Saad LG (2010) Preparation and properties of elastomeric polyurethane/organically modified montmorillonite nanocomposites. J Polym Res 17:801–813
41. Thuc CN, Cao HT, Nguyen DM, Tran MA, Duclaux L, Grillet AC, Thuc HH (2014) Preparation and characterization of polyurethane nanocomposites using vietnamese montmorillonite modified by polyol surfactants. J Nanomater. ID 302735, 1–11
42. Zhong BX, Wei WK, Ming XZ, Mao P (2010) Effect of surface modification of montmorillonite on the properties of rigid polyurethane foam composites. Chin J Polym Sci 45:1065–1073
43. Dave VJ, Hasmukh SP (2013) Synthesis and characterization of interpenetrating polymer networks from transesterified castor oil based polyurethane and polystyrene. J Saudi Chem Soc Prod Hosting Elsevier. doi:10.1016/j.jscs.2013.08.001 (1–6)
44. Pratondo E, Adityo WH, Eva ON (2012) Sumarno effects of chain extender to the structure of castor oil-based polyurethane foam. In: Proceeding of International Conference on Chemical and Material Engineering. ISBN: 978-602-097-281-7
45. Leszczynska A, Njugunab J, Pielichowski K, Banerjee JR (2007) Polymer/montmorillonite nanocomposites with improved thermal properties, Part II: thermal stability of montmorillonite nanocomposites based on different polymeric matrixes. J Thermochim Acta 454:1–22
46. Wang TL, Hsieh TH (1997) Effect of polyol structure and molecular weight on the thermal stability of segmented poly (urethane ureas). J Polym Degrad Stabil J Sci Direct 55:95–102
47. Coutinho FMB, Delpech FMC (2000) Degradation profile of films cast from aqueous polyurethane dispersions. J Poly Degrad Stabil Sci Direct 70:49–57
48. Silva GR, Armando SC, Francine BC, Eliane A, Rodrigo LO (2010) Biodegradation of polyurethanes and nanocomposites to non-cytotoxic degradation products. J Polym Degrad Stabil Sci Direct 95:491–499
49. Petrovic ZS (2010) Polymers from biological oils, petrovic, polymers from biological oils contemporary materials. Kansas Polymer Research Center, Pittsburg State University, Pittsburg, Kansas, USA I-1:39–50
50. Chen YW, Lee YK, Chen YT, Wu JC (2007) High improvement in the properties of exfoliated PU/clay nanocomposites by the alternative swelling process. J Polym Sci Direct 48:2969–2979
51. Heidarian M, Shishesaz MR, Kassiriha SM, Nematollahi M (2011) Study on the effect of ultrasonication time on transport properties of polyurethane/organoclay nanocomposite coatings. J Coat Technol 8:265–274
52. Andrea D, Alessandro P, Amabile P (2011) Effect of the polymer–filler interaction on the thermo-mechanical response of polyurethane–clay nanocomposites from blocked prepolymer. J Reinf Plast Compos 30:325–335
53. Chih WC, Ting KH, Wang YC, Bryan GA, Jiang JL (2013) Intercalation strategies in clay/polymer hybrids. J Prog Polym Sci. Available online 13 July: 1–43
54. Abareshi M, Zebarjad SM, Goharshadi EK (2009) Crystallinity behavior of MDPE-clay nanocomposites fabricated using ball milling method. J Compos Mater 43:2821–2830. doi:10.1177/0021998309345307
55. Monrroy M, Ortega I, Ramírez M, Baeza J, Freer J (2011) Structural change in wood by brown rot fungi and effect on enzymatic hydrolysis. Enzyme Microb J Technol 49(5):472–477
56. Nasir M, Arun G, Mohammad D, Hossen B, Gek KC, Mohd A (2014) Laccase application in medium density fibreboard to prepare a bio-composite. J R Soc Chem 4:11520–11527. doi:10.1039/c3ra40593a