Analytical model for predicting the friction coefficient in point contacts with thermal elastohydrodynamic lubrication

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

Volumn 225, Issue 4, 2011, Pages 181-191

  Echavarri Otero J ^a   Lafont Morgado, P ^a   Chacon Tanarro E ^a   De La Guerra Ochoa, E ^a   Diaz Lantada A ^a   Munoz Guijosa, J M ^a   Munoz Sanz J L ^a  

^a UNIVERSIDAD POLITÉCNICA DE MADRID   (Spain)

Author keywords

Friction coefficient; Mini traction machine; Point contact; Thermal elastohydrodynamic lubrication

Indexed keywords

ANALYTICAL MODEL; AVERAGE VELOCITY; BATH TEMPERATURES; CONTROL PARAMETERS; FRICTION COEFFICIENTS; MEASUREMENT OF FRICTION; MINI-TRACTION-MACHINE; OPERATING CONDITION; PREDICTION MODEL; SLIDE-TO-ROLL RATIO; THEORETICAL CALCULATIONS; THERMAL ELASTOHYDRODYNAMIC LUBRICATION;

CONTACTS (FLUID MECHANICS); ELASTOHYDRODYNAMICS; FORECASTING; LUBRICANTS; MATHEMATICAL MODELS; POINT CONTACTS; PRASEODYMIUM COMPOUNDS; TRACTION (FRICTION); TRIBOLOGY;

ELASTOHYDRODYNAMIC LUBRICATION;

EID: 79960233851     PISSN: 13506501     EISSN: 2041305X     Source Type: Journal    
DOI: 10.1177/1350650111398848     Document Type: Conference Paper

References (39)

1. Bair, S. High pressure rheology for quantitative elasto-hydrodynamics, 2007, Tribology and Interface Engineering Series 54 (Elsevier).
2. Kumar, P. and Khonsari, M. M. On the role of lubricant rheology and piezo-viscous properties in line and point contact EHL. Tribol. Int., 2009, 42(11-12), 1522-1530.
3. Bair, S., Vergne, P., and Querry, M. A unified shear-thinning treatment of both film thickness and traction in EHD. Tribol. Lett., 2005,18(2), 145-152. (Pubitemid 40374121)
4. Bair, S. A Reynolds-Ellis equation for line contacts with shear-thinning. Tribol. Int., 2006, 39, 310-316.
5. Bair, S. and Winer, W. O. Some observations in high pressure rheology of lubricants. Trans. ASMEJ. Lubr. Technol., 1982, 104, 382-386.
6. Höglund, E. Influence of lubricant properties on elastohydrodynamic lubrication. Wear, 1999, 232, 176-184. (Pubitemid 30031732)
7. Dowson, D. Elastohydrodynamic and micro-elasto-hydrodynamic lubrication. Wear, 1995,190,125-138.
8. Stähl, J. and Jacobson, B. O. A non-Newtonian model based on limiting shear stress and slip planes - parametric studies. Tribol. Int., 2003, 36, 801-806.
9. Hamrock, B. J. and Dowson, D. Isothermal elastohydrodynamic lubrication of point contacts. Part III - fully flooded results. J. Lubr. Technol., 1977, 99, 264-276.
10. Gohar, R. Elastohydrodynamics, 1988 (Ellis Horwood Ltd, Chichester, UK).
11. Schmidt, A., Gold, P. W, Abmann, C, Dicke, H., and Loos, J. Viscosity-pressure-temperature behaviour of mineral and synthetic oils. J. Synth. Lubr., 2006, 18(1), 51-79.
12. Stachowiak, G. W. and Batchelor, A. W. Engineering tribology, 2005 (Butterworth-Heinemann, Elsevier).
13. Johnson, K. L. and Tevaarwerk, J. L. Shear behaviour of elastohydrodynamic oil films. Proc. R. Soc. London, Ser. A, 1977, 356, 215-236. (Pubitemid 8545868)
14. Hertz, H. On the contact of elastic solids. In Miscellaneous papers (Eds H. Hertz, D. E. Jones, and G. A. Schort),. 1896, pp. 146-162 (Macmillan, London).
15. Barus, C. Isotherms, isopiestics and isometrics relative to viscosity. Am. J. Sci., 1893, 45, 87-96.
16. Hamrock, B. J. Fundamentals of fluid film lubrication, 1994 (McGraw-Hill, New York, USA).
17. Bair, S. The high pressure rheology of some simple model hydrocarbons. Proc. IMechE, Part J: J. Engineering Tribology, 2002, 216(3), 139-149. DOI: 10.1243/1350650021543960. (Pubitemid 34718600)
18. Jacobson, B. O. Rheology and elastohydrodynamic lubrication, 1991, Tribology Series 19 (Elsevier).
19. Carreau, P. J. Rheological equations from molecular network theories. Trans. Soc. Rheol, 1972, 16(1), 99-127.
20. Yasuda, K., Armstrong, R. C., and Cohen, R. E. Shear flow properties of concentrated solutions of linear and star branched polystyrenes. Rheol. Acta, 1981, 20, 163-178.
21. De Vicente, J., Stokes, J. R., and Spikes, H. A. The fric-tional properties of Newtonian fluids in rolling-sliding soft-EHL contact. Tribol. Lett., 2005, 20, 3-4.
22. Lafont, P., Echávarri, J., Sánchez-Peñuela, J. B., Muñoz, J. L., Díaz, A., Munoz-Guijosa, J. M., Lorenzo, H., Leal, P., and Muñoz, J. Models for predicting friction coefficient and parameters with influence in elastohydrodynamic lubrication. Proc. IMechE, Part J: J. Engineering Tribology, 2009, 223(17), 949-958. DOI: 10.1243/ 13506501IET599.
23. Carli, M., Sharif, K. J., Ciulli, E., Evans, H. P., and Snidle, R. W. Thermal point contact EHL analysis of rolling/sliding contacts with experimental comparison showing anomalous film shapes. Tribol. Int., 2009, 42(4), 517-525.
24. Cheng, H. S. Calculations of elastohydrodynamic film thickness in high speed rolling and sliding contacts. Mechanical Technology, Inc., Technical Report, MTI-67TR24, 1967.
25. Gupta, P. K., Cheng, H. S., Forster, N. H., and Schrand, J. B. Viscoelastic effects in MIL-L-7808-type lubricant. I: analytical formulation. Tribol. Trans., 1992, 35(2), 269-274.
26. Jubault, I., Molimard, J., Lubrecht, A. A., Mansot, J. L., and Vergne, P. In situ pressure and film thickness measurements in rolling/sliding lubricated point contacts. Tribol. Lett., 2003, 15(4), 421-429. (Pubitemid 38078456)
27. Bair, S. Shear thinning correction for rolling/sliding elastohydrodynamic film thickness. Proc. IMechE, Part J: J. Engineering Tribology, 2005, 219, pp. 69-74. DOI: 10.1243/135065005X9709. (Pubitemid 40390297)
28. Blok, H. Theoretical study of temperature rise at surfaces of actual contact under oiliness lubricating conditions. Gen. Discus. Lubr. Instn Mech. Engrs Lond., 1937, 2, 222-235.
29. Jaeger, J. C. Moving sources of heat and the temperature at sliding contacts. Proc. R. Soc, NSW, 1943, 76, 203-224.
30. Archard, J. F. The temperature of rubbing surfaces. Wear, 1958/59, 2, 438-455.
31. Olver, A. V. and Spikes, H. A. Prediction of traction in elastohydrodynamic lubrication. Proc. IMechE, Part J: J. Engineering Tribology, 1998,212, 321-332. DOI: 10.1243/1350650981542137.
32. Hsiao, H. S. and Hamrock, B. J. A complete solution for thermal-elastohydrodynamic lubrication of line contacts using circular non-Newtonian fluid model. J. TWM., ASME paper 91-Trib-24, 1992.
33. Jubault, I., Molimard, J., Lubrecht, A. A., Mansot, J. L., and Vergne, P. In situ pressure and film thickness measurements in rolling/sliding lubricated point contacts. Tribol. Lett., 2003, 15(4), 421-429. (Pubitemid 38078456)
34. Habchi, W., Vergne, P., Bair, S., Andersson, O., Eyher-amendy, D., and Morales-Espejel, G. E. Influence of pressure and temperature dependence of thermal properties of a lubricant on the behavior of circular TEHD contacts. Tribol. Int., 2010, 43, 1842-1850.
35. Venner, C. H. and Lubrecht, A. A. Multilevel methods in lubrication, 2000, Tribology Series 37 (Elsevier).
36. Carli, M., Sharif, K. J., Chilli, E., Evans, H. P., and Snidle, R. W. Thermal point contact EHL analysis of rolling sliding contacts with experimental comparison showing anomalous film shapes. Tribol. Int., 2009, 42, 517-525.
37. Sharif, K. J., Evans, H. P., Snidle, R. W., and Newall, J. P. Modelling of film thickness and traction in a variable ratio traction drive rig. Trans. ASME J. Tribol., 2004,126, 92-104. (Pubitemid 38242303)
38. Habchi, W., Eyheramendy, D., Bair, S., Vergne, P., and Morales-Espejel, G. Thermal elastohydrodynamic lubrication of point contacts using a newtonian/generalized Newtonian lubricant. Tribol. Lett., 2008, 30, 41-52.
39. Sui, P. C. and Sadeghi, F. Non-Newtonian thermal elastohydrodynamic lubrication. Trans. ASME J. Tribol., 1991, 113, 390-397.