Advances in microarc oxidation coated AZ31 Mg alloys for biomedical applications

Corrosion Science

Volumn 91, Issue , 2015, Pages 7-28

  Zhang, Lei ^a   Zhang, Junqing ^a   Chen, Cheng fu ^a   Gu, Yanhong ^b  

^a University of Alaska Fairbanks   (United States)

^b BEIJING INSTITUTE OF PETROCHEMICAL TECHNOLOGY   (China)

Author keywords

A. Alloy; A. Magnesium; C. Oxide coatings

Indexed keywords

ALUMINUM ALLOYS; ALUMINUM COATINGS; CORROSION RATE; CORROSIVE EFFECTS; MAGNESIUM ALLOYS; MAGNESIUM COMPOUNDS; MEDICAL APPLICATIONS; OXIDATION;

AZ31 MG ALLOYS; BIOMEDICAL APPLICATIONS; CORROSION PROPERTY; ISSUES AND CHALLENGES; MG ALLOY; MICROARC; MICROARC OXIDATION; OXIDE COATING;

CORROSION RESISTANT COATINGS;

EID: 84916218670     PISSN: 0010938X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.corsci.2014.11.001     Document Type: Review

References (216)

1. Eliezer D., Aghion E., Froes F.H. Magnesium science, technology and applications. Adv. Perform. Mater. 1998, 5:201-212.
2. Lin B.T., Kuo C.C. Application of an integrated RE/RP/CAD/CAE/CAM system for magnesium alloy shell of mobile phone. J. Mater. Process. Tech. 2009, 209:2818-2830.
3. Staiger M.P., Pietak A.M., Huadmai J., Dias G. Magnesium and its alloys as orthopedic biomaterials: a review. Biomaterials 2006, 27:1728-1734.
4. Zeng R.C., Dietzel W., Witte F., Hort N., Blawert C. Progress and challenge for magnesium alloys as biomaterials. Adv. Eng. Mater. 2008, 10:B3-B14.
5. Witte F., Hort N., Vogt C., Cohen S., Kainer K.U., Willumeit R., Feyerabend F. Degradable biomaterials based on magnesium corrosion. Curr. Opin. Solid St. M. 2008, 12:63-72.
6. Witte F. The history of biodegradable magnesium implants: a review. Acta Biomater. 2010, 6:1680-1692.
7. Rodrigues L.R. Inhibition of bacterial adhesion on medical devices. Adv. Exp. Med. Biol. 2011, 715:351-367.
8. Bellucci D., Cannillo V., Cattini A., Sola A. A new generation of scaffolds for bone tissue engineering. Ind. Ceram. 2011, 31:59-62.
9. Boccaccini A.R., Blaker J.J. Bioactive composite materials for tissue engineering scaffolds. Expert Rev. Med. Dev. 2005, 2:303-317.
10. Mourino V., Boccaccini A.R. Bone tissue engineering therapeutics: controlled drug delivery in three-dimensional scaffolds. J. R. Soc. Interface 2010, 7:209-227.
11. Gray J.E., Luan B. Protective coatings on magnesium and its alloys - a critical review. J. Alloy. Compd. 2002, 336:88-113.
12. Niinomi M. Recent metallic materials for biomedical applications. Metall. Mater. Trans. A 2002, 33:477-486.
13. Niinomi M., Nakai M., Hieda J. Development of new metallic alloys for biomedical applications. Acta Biomater. 2012, 8:3888-3903.
14. Gu X.-N., Zheng Y.-F. A review on magnesium alloys as biodegradable materials. Front. Mater. Sci. China 2010, 4:111-115.
15. Hermawan H., Dube D., Mantovani D. Developments in metallic biodegradable stents. Acta Biomater. 2010, 6:1693-1697.
16. Sankara Narayanan T.S.N., Park I.S., Lee M.H. Strategies to improve the corrosion resistance of microarc oxidation (MAO) coated magnesium alloys for degradable implants: prospects and challenges. Prog. Mater. Sci. 2014, 60:1-71.
17. Wang K. The use of titanium for medical applications in the USA. Mater. Sci. Eng. A 1996, 213:134-137.
18. Kuroda D., Kawasaki H., Hiromoto S., Hanawa T. Development of new Ti-Fe-Ta and Ti-Fe-Ta-Zr system alloys for biomedical applications. Mater. Trans. 2005, 46:1532-1539.
19. Miura K., Yamada N., Hanada S., Jung T.K., Itoi E. The bone tissue compatibility of a new Ti-Nb-Sn alloy with a low Young's modulus. Acta Biomater. 2011, 7:2320-2326.
20. Matkovic T., Slokar L., Matkovic P. Effect of composition on the structure and properties of Ti-Co-Cr alloys. Metalurgija 2010, 49:33-36.
21. Zhou Y.L., Niinomi M., Akahori T. Changes in mechanical properties of Ti alloys in relation to alloying additions of Ta and Hf. Mater. Sci. Eng. A 2008, 483-84:153-156.
22. Ikeda M., Ueda M., Matsunaga R., Ogawa M., Niinomi M. Isothermal aging behavior of beta titanium-manganese alloys. Mater. Trans. 2009, 50:2737-2743.
23. McBride E.D. Absorbable metal in bone surgery. J. Am. Med. Assoc. 1938, 111:2464-2467.
24. Guo X.H., Du K.Q., Guo Q.Z., Wang Y., Wang R., Wang F.H. Effect of phytic acid on the corrosion inhibition of composite film coated on Mg-Gd-Y alloy. Corros. Sci. 2013, 76:129-141.
25. Zhang S.X., Li J.A., Song Y., Zhao C.L., Zhang X.N., Xie C.Y., Zhang Y., Tao H.R., He Y.H., Jiang Y., Bian Y.J. In vitro degradation, hemolysis and MC3T3-E1 cell adhesion of biodegradable Mg-Zn alloy. Mater. Sci. Eng. C 2009, 29:1907-1912.
26. Wang H.X., Guan S.K., Wang X., Ren C.X., Wang L.G. In vitro degradation and mechanical integrity of Mg-Zn-Ca alloy coated with Ca-deficient hydroxyapatite by the pulse electrodeposition process. Acta Biomater. 2010, 6:1743-1748.
27. Gu X.N., Li N., Zhou W.R., Zheng Y.F., Zhao X., Cai Q.Z., Ruan L.Q. Corrosion resistance and surface biocompatibility of a microarc oxidation coating on a Mg-Ca alloy. Acta Biomater. 2011, 7:1880-1889.
28. 3. J. Am. Ceram. Soc. 1998, 81:1743-1748.
29. Nagels J., Stokdijk M., Rozing P.M. Stress shielding and bone resorption in shoulder arthroplasty. J. Shoulder Elb. Surg. 2003, 12:35-39.
30. Hartwig A. Role of magnesium in genomic stability. Mutat. Res. Fund. Mol. M 2001, 475:113-121.
31. Okuma T. Magnesium and bone strength. Nutrition 2001, 17:679-680.
32. Saris N.E.L., Mervaala E., Karppanen H., Khawaja J.A., Lewenstam A. Magnesium - an update on physiological, clinical and analytical aspects. Clin. Chim. Acta 2000, 294:1-26.
33. Wiesmann H.P., Tkotz T., Joos U., Zierold K., Stratmann U., Szuwart T., Plate U., Hohling H.J. Magnesium in newly formed dentin mineral of rat incisor. J. Bone Miner. Res. 1997, 12:380-383.
34. Hornberger H., Virtanen S., Boccaccini A.R. Biomedical coatings on magnesium alloys - a review. Acta Biomater. 2012, 8:2442-2455.
35. Verdier S., Boinet M., Maximovitch S., Dalard F. Formation, structure and composition of anodic films on AM60 magnesium alloy obtained by DC plasma anodising. Corros. Sci. 2005, 47:1429-1444.
36. Huang C.A., Wang T.H., Weirich T., Neubert V. Electrodeposition of a protective copper/nickel deposit on the magnesium alloy (AZ31). Corros. Sci. 2008, 50:1385-1390.
37. Ardelean H., Frateur I., Zanna S., Atrens A., Marcus P. Corrosion protection of AZ91 magnesium alloy by anodizing in niobium and zirconium-containing electrolytes. Corros. Sci. 2009, 51:3030-3038.
38. Shao Y.W., Huang H., Zhang T., Meng G.Z., Wang F.H. Corrosion protection of Mg-5Li alloy with epoxy coatings containing polyaniline. Corros. Sci. 2009, 51:2906-2915.
39. Wang C., Zhu S.L., Jiang F., Wang F.H. Cerium conversion coatings for AZ91D magnesium alloy in ethanol solution and its corrosion resistance. Corros. Sci. 2009, 51:2916-2923.
40. 2 nanoparticles for corrosion protection of AA2024 and Mg-AZ31B alloys. Corros. Sci. 2009, 51:1998-2005.
41. Arrabal R., Pardo A., Merino M.C., Mohedano M., Casajus P., Matykina E., Skeldon P., Thompson G.E. Corrosion behaviour of a magnesium matrix composite with a silicate plasma electrolytic oxidation coating. Corros. Sci. 2010, 52:3738-3749.
42. 4 with different concentrations of NaCl. Corros. Sci. 2010, 52:1326-1332.
43. Lei T., Ouyang C., Tang W., Li L.F., Zhou L.S. Enhanced corrosion protection of MgO coatings on magnesium alloy deposited by an anodic electrodeposition process. Corros. Sci. 2010, 52:3504-3508.
44. Yang Y., Wu H. Effect of current density on corrosion resistance of micro-arc oxide coatings on magnesium alloy. Trans. Nonferrous Met. Soc. China 2010, 20:S688-S692.
45. Volovitch P., Vu T.N., Allely C., Aal A.A., Ogle K. Understanding corrosion via corrosion product characterization: II. Role of alloying elements in improving the corrosion resistance of Zn-Al-Mg coatings on steel. Corros. Sci. 2011, 53:2437-2445.
46. Yang H.Y., Guo X.W., Wu G.H., Ding W.J., Birbilis N. Electrodeposition of chemically and mechanically protective Al-coatings on AZ91D Mg alloy. Corros. Sci. 2011, 53:381-387.
47. Choi Y.I., Salman S., Kuroda K., Okido M. Improvement in corrosion characteristics of AZ31 Mg alloy by square pulse anodizing between transpassive and active regions. Corros. Sci. 2012, 63:5-11.
48. Frignani A., Grassi V., Zanotto F., Zucchi F. Inhibition of AZ31 Mg alloy corrosion by anionic surfactants. Corros. Sci. 2012, 63:29-39.
49. Li Z.J., Jing X.Y., Yuan Y., Zhang M.L. Composite coatings on a Mg-Li alloy prepared by combined plasma electrolytic oxidation and sol-gel techniques. Corros. Sci. 2012, 63:358-366.
50. Li Z.J., Yuan Y., Jing X.Y. Effect of current density on the structure, composition and corrosion resistance of plasma electrolytic oxidation coatings on Mg-Li alloy. J. Alloy. Compd. 2012, 541:380-391.
51. Chen J., Song Y.W., Shan D.Y., Han E.H. Modifications of the hydrotalcite film on AZ31 Mg alloy by phytic acid: the effects on morphology, composition and corrosion resistance. Corros. Sci. 2013, 74:130-138.
52. 2 duplex-layer coating on AZ91D magnesium alloy for corrosion resistance. Corros. Sci. 2013, 76:142-153.
53. Nemcova A., Skeldon P., Thompson G.E., Morse S., Cizek J., Pacal B. Influence of plasma electrolytic oxidation on fatigue performance of AZ61 magnesium alloy. Corros. Sci. 2014, 82:58-66.
54. Song G.L., Shi Z.M. Corrosion mechanism and evaluation of anodized magnesium alloys. Corros. Sci. 2014, 85:126-140.
55. Staisiunas L., Miecinskas P., Leinartas K., Selskis A., Griguceviciene A., Juzeliunas E. Sputter-deposited Mg-Al-Zn-Cr alloys-electrochemical characterization of single films and multilayer protection of AZ31 magnesium alloy. Corros. Sci. 2014, 80:487-493.
56. Yang H.Y., Guo X.W., Chen X.B., Birbilis N. A homogenisation pre-treatment for adherent and corrosion-resistant Ni electroplated coatings on Mg-alloy AZ91D. Corros. Sci. 2014, 79:41-49.
57. Chen X.B., Birbilis N., Abbott T.B. Review of corrosion-resistant conversion coatings for magnesium and its alloys. Corrosion 2011, 67:035005.
58. Rettig R., Virtanen S. Composition of corrosion layers on a magnesium rare-earth alloy in simulated body fluids. J. Biomed. Mater. Res. A 2009, 88A:359-369.
59. Rettig R., Virtanen S. Time-dependent electrochemical characterization of the corrosion of a magnesium rare-earth alloy in simulated body fluids. J. Biomed. Mater. Res. A 2008, 85A:167-175.
60. - content and its influence on the composition of biomimetic apatites. Acta Biomater. 2006, 2:181-189.
61. Jo J.H., Hong J.Y., Shin K.S., Kim H.E., Koh Y.H. Enhancing biocompatibility and corrosion resistance of Mg implants via surface treatments. J. Biomater. Appl. 2012, 27:469-476.
62. Hiromoto S., Yamamoto A. High corrosion resistance of magnesium coated with hydroxyapatite directly synthesized in an aqueous solution. Electrochim. Acta 2009, 54:7085-7093.
63. Gray-Munro J.E., Strong M. The mechanism of deposition of calcium phosphate coatings from solution onto magnesium alloy AZ31. J. Biomed. Mater. Res. A 2009, 90A:339-350.
64. 2 conversion coating for magnesium. Corros. Sci. 2011, 53:2263-2268.
65. Xu L.P., Pan F., Yu G.N., Yang L., Zhang E.L., Yang K. In vitro and in vivo evaluation of the surface bioactivity of a calcium phosphate coated magnesium alloy. Biomaterials 2009, 30:1512-1523.
66. Yang J.X., Cui F.Z., Lee I.S., Zhang Y., Yin Q.S., Xia H., Yang S.X. In vivo biocompatibility and degradation behavior of Mg alloy coated by calcium phosphate in a rabbit model. J. Biomater. Appl. 2012, 27:153-164.
67. Carboneras M., Garcia-Alonso M.C., Escudero M.L. Biodegradation kinetics of modified magnesium-based materials in cell culture medium. Corros. Sci. 2011, 53:1433-1439.
68. Chiu K.Y., Wong M.H., Cheng F.T., Man H.C. Characterization and corrosion studies of fluoride conversion coating on degradable Mg implants. Surf. Coat. Technol. 2007, 202:590-598.
69. Witte F., Fischer J., Nellesen J., Vogt C., Vogt J., Donath T., Beckmann F. In vivo corrosion and corrosion protection of magnesium alloy LAE442. Acta Biomater. 2010, 6:1792-1799.
70. Seitz J.M., Collier K., Wulf E., Bormann D., Bach F.W. Comparison of the corrosion behavior of coated and uncoated magnesium alloys in an in vitro corrosion environment. Adv. Eng. Mater. 2011, 13:B313-B323.
71. Kannan M.B., Raman R.K.S. Evaluating the stress corrosion cracking susceptibility of Mg-Al-Zn alloy in modified-simulated body fluid for orthopaedic implant application. Scripta Mater. 2008, 59:175-178.
72. Song Y., Zhang S.X., Li J.A., Zhao C.L., Zhang X.N. Electrodeposition of Ca-P coatings on biodegradable Mg alloy: in vitro biomineralization behavior. Acta Biomater. 2010, 6:1736-1742.
73. 2 sealing. J. Alloy. Compd. 2009, 469:286-292.
74. Feil F., Furbeth W., Schutze M. Purely inorganic coatings based on nanoparticles for magnesium alloys. Electrochim. Acta 2009, 54:2478-2486.
75. 3 coatings on pre-treated AZ91D magnesium alloy. Corros. Sci. 2009, 51:2950-2958.
76. Lalk M., Reifenrath J., Rittershaus D., Bormann D., Meyer-Lindenberg A. Biocompatibility and degradation behaviour of degradable magnesium sponges coated with bioglass-method establishment within the framework of a pilot study. Materialwiss. Werkst. 2010, 41:1025-1034.
77. Chen B.Y., Liang C.H. Preparation of hydroxyapatite coating by the use of a sacrificial Mg anode method. Ceram. Int. 2007, 33:701-703.
78. Song Y.W., Shan D.Y., Han E.H. Electrodeposition of hydroxyapatite coating on AZ91D magnesium alloy for biomaterial application. Mater. Lett. 2008, 62:3276-3279.
79. Gonzalez S., Pellicer E., Fornell J., Blanquer A., Barrios L., Ibanez E., Solsona P., Surinach S., Baro M.D., Nogues C., Sort J. Improved mechanical performance and delayed corrosion phenomena in biodegradable Mg-Zn-Ca alloys through Pd-alloying. J. Mech. Behav. Biomed. 2012, 6:53-62.
80. Li Z.J., Gu X.N., Lou S.Q., Zheng Y.F. The development of binary Mg-Ca alloys for use as biodegradable materials within bone. Biomaterials 2008, 29:1329-1344.
81. 2 alloy for potential applications in bioresorbable implantable devices. Acta Biomater. 2012, 8:3852-3864.
82. Yang L., Huang Y.D., Feyerabend F., Willumeit R., Kainer K.U., Hort N. Influence of ageing treatment on microstructure, mechanical and bio-corrosion properties of Mg-Dy alloys. J. Mech. Behav. Biomed. 2012, 13:36-44.
83. Dziuba D., Meyer-Lindenberg A., Seitz J.M., Waizy H., Angrisani N., Reifenrath J. Long-term in vivo degradation behaviour and biocompatibility of the magnesium alloy ZEK100 for use as a biodegradable bone implant. Acta Biomater. 2013, 9:8548-8560.
84. Bornapour M., Muja N., Shum-Tim P., Cerruti M., Pekguleryuz M. Biocompatibility and biodegradability of Mg-Sr alloys: the formation of Sr-substituted hydroxyapatite. Acta Biomater. 2013, 9:5319-5330.
85. Gu X.N., Xie X.H., Li N., Zheng Y.F., Qin L. In vitro and in vivo studies on a Mg-Sr binary alloy system developed as a new kind of biodegradable metal. Acta Biomater. 2012, 8:2360-2374.
86. Brar H.S., Wong J., Manuel M.V. Investigation of the mechanical and degradation properties of Mg-Sr and Mg-Zn-Sr alloys for use as potential biodegradable implant materials. J. Mech. Behav. Biomed. 2012, 7:87-95.
87. Brar H.S., Ball J.P., Berglund I.S., Allen J.B., Manuel M.V. A study of a biodegradable Mg-3Sc-3Y alloy and the effect of self-passivation on the in vitro degradation. Acta Biomater. 2013, 9:5331-5340.
88. Duan H.P., Du K.Q., Yan C.W., Wang F.H. Electrochemical corrosion behavior of composite coatings of sealed MAO film on magnesium alloy AZ91D. Electrochim. Acta 2006, 51:2898-2908.
89. Shadanbaz S., Dias G.J. Calcium phosphate coatings on magnesium alloys for biomedical applications: a review. Acta Biomater. 2012, 8:20-30.
90. Yerokhin A.L., Nie X., Leyland A., Matthews A., Dowey S.J. Plasma electrolysis for surface engineering. Surf. Coat. Technol. 1999, 122:73-93.
91. Krishna L.R., Sundararajan G. Aqueous corrosion behavior of micro arc oxidation (MAO)-coated magnesium alloys: a critical review. JOM 2014, 66:1045-1060.
92. Zhao L.C., Cui C.X., Wang Q.Z., Bu S.J. Growth characteristics and corrosion resistance of micro-arc oxidation coating on pure magnesium for biomedical applications. Corros. Sci. 2010, 52:2228-2234.
93. Wen Z.H., Wu C.J., Dai C.S., Yang F.X. Corrosion behaviors of Mg and its alloys with different Al contents in a modified simulated body fluid. J. Alloy. Compd. 2009, 488:392-399.
94. Zhang S.X., Zhang X.N., Zhao C.L., Li J.A., Song Y., Xie C.Y., Tao H.R., Zhang Y., He Y.H., Jiang Y., Bian Y.J. Research on an Mg-Zn alloy as a degradable biomaterial. Acta Biomater. 2010, 6:626-640.
95. Song G.L., Atrens A., Wu X.L., Zhang B. Corrosion behaviour of AZ21, AZ501 and AZ91 in sodium chloride. Corros. Sci. 1998, 40:1769-1791.
96. Gu Y.H., Cai X.J., Guo Y.J., Ning C.Y. Effect of chloride ion level on the corrosion performance of MAO modified AZ31 alloy in NaCl solutions. Mater. Design 2013, 43:542-548.
97. Guo X.H., An M.Z. Experimental study of electrochemical corrosion behaviour of bilayer on AZ31B Mg alloy. Corros. Sci. 2010, 52:4017-4027.
98. Guo X.H., Du K.Q., Guo Q.Z., Wang Y., Wang F.H. Experimental study of corrosion protection of a three-layer film on AZ31B Mg alloy. Corros. Sci. 2012, 65:367-375.
99. Chang L.M., Tian L.F., Liu W., Duan X.Y. Formation of dicalcium phosphate dihydrate on magnesium alloy by micro-arc oxidation coupled with hydrothermal treatment. Corros. Sci. 2013, 72:118-124.
100. Blawert C., Dietzel W., Ghali E., Song G.L. Anodizing treatments for magnesium alloys and their effect on corrosion resistance in various environments. Adv. Eng. Mater. 2006, 8:511-533.
101. Cai J.S., Cao F.H., Chang L.R., Zheng J.J., Zhang J.Q., Cao C.A. The preparation and corrosion behaviors of MAO coating on AZ91D with rare earth conversion precursor film. Appl. Surf. Sci. 2011, 257:3804-3811.
102. Ghasemi A., Raja V.S., Blawert C., Dietzel W., Kainer K.U. Study of the structure and corrosion behavior of PEO coatings on AM50 magnesium. Alloy by electrochemical impedance spectroscopy. Surf. Coat. Technol. 2008, 202:3513-3518.
103. Gu Y.H., Chen C.F., Bandopadhyay S., Ning C.Y., Zhang Y.J., Guo Y.J. Corrosion mechanism and model of pulsed DC microarc oxidation treated AZ31 alloy in simulated body fluid. Appl. Surf. Sci. 2012, 258:6116-6126.
104. Guo H.F., An M.Z. Growth of ceramic coatings on AZ91D magnesium alloys by micro-arc oxidation in aluminate-fluoride solutions and evaluation of corrosion resistance. Appl. Surf. Sci. 2005, 246:229-238.
105. Guo H.F., An M.Z., Huo H.B., Xu S., Wu L.J. Microstructure characteristic of ceramic coatings fabricated on magnesium alloys by micro-arc oxidation in alkaline silicate solutions. Appl. Surf. Sci. 2006, 252:7911-7916.
106. Han X.G., Zhu X.P., Lei M.K. Electrochemical properties of microarc oxidation films on a magnesium alloy modified by high-intensity pulsed ion beam. Surf. Coat. Technol. 2011, 206:874-878.
107. Hussein R.O., Zhang P., Nie X., Xia Y., Northwood D.O. The effect of current mode and discharge type on the corrosion resistance of plasma electrolytic oxidation (PEO) coated magnesium alloy AJ62. Surf. Coat. Technol. 2011, 206:1990-1997.
108. Liang J., Hu L.T., Hao J.C. Improvement of corrosion properties of microarc oxidation coating on magnesium alloy by optimizing current density parameters. Appl. Surf. Sci. 2007, 253:6939-6945.
109. Liu J., Lu Y., Jing X., Yuan Y., Zhang M. Characterization of plasma electrolytic oxidation coatings formed on Mg-Li alloy in an alkaline silicate electrolyte containing silica sol. Mater. Corros. 2009, 60:865-870.
110. Ma Y., Nie X., Northwood D.O., Hu H. Corrosion and erosion properties of silicate and phosphate coatings on magnesium. Thin Solid Films 2004, 469:472-477.
111. Malayoglu U., Tekin K.C., Shrestha S. Influence of post-treatment on the corrosion resistance of PEO coated AM50B and AM60B Mg alloys. Surf. Coat. Technol. 2010, 205:1793-1798.
112. Wu X.H., Su P.B., Jiang Z.H., Meng S. Influences of current density on tribological characteristics of ceramic coatings on ZK60 Mg alloy by plasma electrolytic oxidation. ACS Appl. Mater. Inter. 2010, 2:808-812.
113. Yao Z.P., Li L.L., Liu X.R., Jiang Z.H. Preparation of ceramic conversion layers containing Ca and P on AZ91D Mg alloys by plasma electrolytic oxidation. Surf. Eng. 2010, 26:317-320.
114. Walsh F.C., Low C.T.J., Wood R.J.K., Stevens K.T., Archer J., Poeton A.R., Ryder A. Plasma electrolytic oxidation (PEO) for production of anodised coatings on lightweight metal (Al, Mg, Ti) alloys. Trans. I. Met. Finish. 2009, 87:122-135.
115. Gnedenkov S.V., Khrisanfova O.A., Zavidnaya A.G., Sinebryukhov S.L., Egorkin V.S., Nistratova M.V., Yerokhin A., Matthews A. PEO coatings obtained on an Mg-Mn type alloy under unipolar and bipolar modes in silicate-containing electrolytes. Surf. Coat. Technol. 2010, 204:2316-2322.
116. Srinivasan P.B., Liang J., Blawert C., Stormer M., Dietzel W. Characterization of calcium containing plasma electrolytic oxidation coatings on AM50 magnesium alloy. Appl. Surf. Sci. 2010, 256:4017-4022.
117. Khaselev O., Weiss D., Yahalom J. Structure and composition of anodic films formed on binary Mg-Al alloys in KOH-aluminate solutions under continuous sparking. Corros. Sci. 2001, 43:1295-1307.
118. 2 composite coatings on magnesium prepared by micro-arc oxidation. Surf. Coat. Technol. 2008, 202:4278-4284.
119. Khaselev O., Weiss D., Yahalom J. Anodizing of pure magnesium in KOH-aluminate solutions under sparking. J. Electrochem. Soc. 1999, 146:1757-1761.
120. Shang W., Chen B.Z., Shi X.C., Chen Y., Xiao X. Electrochemical corrosion behavior of composite MAO/sol-gel coatings on magnesium alloy AZ91D using combined micro-arc oxidation and sol-gel technique. J. Alloy. Compd. 2009, 474:541-545.
121. Xue W.B., Deng Z.W., Chen R.Y., Zhang T.H. Growth regularity of ceramic coatings formed by microarc oxidation on Al-Cu-Mg alloy. Thin Solid Films 2000, 372:114-117.
122. Zhou X., Thompson G.E., Skeldon P., Wood G.C., Shimizu K., Habazaki H. Film formation and detachment during anodizing of Al-Mg alloys. Corros. Sci. 1999, 41:1599-1613.
123. Sundararajan G., Krishna L.R. Mechanisms underlying the formation of thick alumina coatings through the MAO coating technology. Surf. Coat. Technol. 2003, 167:269-277.
124. Arrabal R., Mota J.M., Criado A., Pardo A., Mohedano M., Matykina E. Assessment of duplex coating combining plasma electrolytic oxidation and polymer layer on AZ31 magnesium alloy. Surf. Coat. Technol. 2012, 206:4692-4703.
125. Yang W., Wang P., Guo Y.C., Jiang B.L., Yang F., Li J.P. Microstructure and corrosion resistance of modified AZ31 magnesium alloy using microarc oxidation combined with electrophoresis process. J. Wuhan Univ. Technol. 2013, 28:612-616.
126. Gu Y.H., Xiong W.M., Ning C.Y., Zhang J. Residual stresses in microarc oxidation ceramic coatings on biocompatible AZ31 magnesium alloys. J. Mater. Eng. Perform. 2012, 21:1085-1090.
127. Packham D.E. Surface energy, surface topography and adhesion. Int. J. Adhes. Adhes. 2003, 23:437-448.
128. Critchlow G.W., Brewis D.M. Review of surface pretreatments for aluminium alloys. Int. J. Adhes. Adhes. 1996, 16:255-275.
129. Critchlow G.W., Yendall K.A., Bahrani D., Quinn A., Andrews F. Strategies for the replacement of chromic acid anodising for the structural bonding of aluminium alloys. Int. J. Adhes. Adhes. 2006, 26:419-453.
130. Tang Y.M., Zhao X.H., Jiang K.S., Chen J., Zuo Y. The influences of duty cycle on the bonding strength of AZ31B magnesium alloy by microarc oxidation treatment. Surf. Coat. Technol. 2010, 205:1789-1792.
131. Lee Y.K., Lee K., Jung T. Study on microarc oxidation of AZ31B magnesium alloy in alkaline metal silicate solution. Electrochem. Commun. 2008, 10:1716-1719.
132. Wang H.M., Chen Z.H., Li L.L. Corrosion resistance and microstructure characteristics of plasma electrolytic oxidation coatings formed on AZ31 magnesium alloy. Surf. Eng. 2010, 26:385-391.
133. Srinivasan P.B., Liang J., Blawert C., Stormer M., Dietzel W. Effect of current density on the microstructure and corrosion behaviour of plasma electrolytic oxidation treated AM50 magnesium alloy. Appl. Surf. Sci. 2009, 255:4212-4218.
134. Zhang J., Gu Y.H., Guo Y.J., Ning C.Y. Electrochemical behavior of biocompatible AZ31 magnesium alloy in simulated body fluid. J. Mater. Sci. 2012, 47:5197-5204.
135. Huang P., Wang F., Xu K.W., Han Y. Mechanical properties of titania prepared by plasma electrolytic oxidation at different voltages. Surf. Coat. Technol. 2007, 201:5168-5171.
136. Xiong W.M., Ning C.Y., Gu Y.H., Zhang J. Effect of positive voltage on phase structure of micro-arc oxidation films of magnesium alloy. Rare Metal Mat. Eng. 2011, 40:2236-2240.
137. Chang L.R., Cao F.H., Cai J.S., Liu W.J., Zhang Z., Zhang J.Q. Influence of electric parameters on MAO of AZ91D magnesium alloy using alternative square-wave power source. T. Nonferr. Metal. Soc. 2011, 21:307-316.
138. Zhang R.F., Shan D.Y., Chen R.S., Han E.H. Effects of electric parameters on properties of anodic coatings formed on magnesium alloys. Mater. Chem. Phys. 2008, 107:356-363.
139. Gu Y.H., Chen C.f., Bandopadhyay S., Ning C.Y., Guo Y.J. Residual stress in pulsed dc microarc oxidation treated AZ31 alloy. Surf. Eng. 2012, 28:498-502.
140. Durdu S., Bayramoglu S., Demirtas A., Usta M., Üçişik A.H. Characterization of AZ31 Mg alloy coated by plasma electrolytic oxidation. Vacuum 2013, 88:130-133.
141. Gu Y.H., Bandopadhyay S., Chen C.F., Guo Y.J., Ning C.Y. Effect of oxidation time on the corrosion behavior of micro-arc oxidation produced AZ31 magnesium alloys in simulated body fluid. J. Alloy. Compd. 2012, 543:109-117.
142. Lv G.H., Chen H., Li L., Niu E.W., Pang H., Zou B., Yang S.Z. Investigation of plasma electrolytic oxidation process on AZ91D magnesium alloy. Curr. Appl. Phys. 2009, 9:126-130.
143. Jones D.A. Principles and Prevention of Corrosion 1996, Prentice Hall, Upper Saddle River. second ed.
144. Stern M., Geary A.L. Electrochemical polarization I. A theoretical analysis of the shape of polarization curves. J. Electrochem. Soc. 1957, 104:56-63.
145. Kim D.J., Kim M.J., Kim J.S., Kim H.P. Material characteristics of Ni-P-B electrodeposits obtained from a sulfamate solution. Surf. Coat. Technol. 2008, 202:2519-2526.
146. Wang X.M., Zhu L.Q., Li W.P., Liu H.C., Li Y.H. Effects of half-wave and full-wave power source on the anodic oxidation process on AZ91D magnesium alloy. Appl. Surf. Sci. 2009, 255:5721-5728.
147. Chen H., Lv G.H., Zhang G.L., Pang H., Wang X.Q., Zhang Y.W., Lee H.J., Yang S.Z. Effect of the pulse duty cycle on characteristics of plasma electrolytic oxidation coatings formed on AZ31 magnesium alloy. Chin. Phys. Lett. 2009, 26:096802.
148. Seyfoori A., Mirdamadi S., Khavandi A., Raufi Z.S. Biodegradation behavior of micro-arc oxidized AZ31 magnesium alloys formed in two different electrolytes. Appl. Surf. Sci. 2012, 261:92-100.
149. Li J.M., Zhang Q.W., Cai H., Wang A.J., Zhang J.M., Hua X.H. Controlled deposition, electrical and electrochemical properties of electroless nickel layers on microarc oxidized magnesium substrates. Mater. Lett. 2013, 93:263-265.
150. Srinivasan P.B., Liang J., Blawert C., Dietzel W. Environmentally assisted cracking behaviour of plasma electrolytic oxidation coated AZ31 magnesium alloy. Corros. Eng. Sci. Technol. 2011, 46:706-711.
151. Guo Y., Wang G.X., Dong G.J., Gong F., Zhang L.L., Zhang M.L. Corrosion resistance of anodized AZ31 Mg alloy in borate solution containing titania sol. J. Alloy. Compd. 2008, 463:458-461.
152. 3-containing coating on AZ31 magnesium alloy by micro-arc oxidation. Mater. Lett. 2013, 93:427-430.
153. Zhao Q.M., Guo X., Dang X.Q., Hao J.M., Lai J.H., Wang K.Z. Preparation and properties of composite MAO/ECD coatings on magnesium alloy. Colloid Surf. B 2013, 102:321-326.
154. Li L.H., Kong Y.M., Kim H.W., Kim Y.W., Kim H.E., Heo S.J., Koak J.Y. Improved biological performance of Ti implants due to surface modification by micro-arc oxidation. Biomaterials 2004, 25:2867-2875.
155. Wang L., Chen L., Yan Z.C., Wang H.L., Peng J.Z. Effect of potassium fluoride on structure and corrosion resistance of plasma electrolytic oxidation films formed on AZ31 magnesium alloy. J. Alloy. Compd. 2009, 480:469-474.
156. Liang J., Guo B.G., Tian J., Liu H.W., Zhou J.F., Xu T. Effect of potassium fluoride in electrolytic solution on the structure and properties of microarc oxidation coatings on magnesium alloy. Appl. Surf. Sci. 2005, 252:345-351.
157. Krishna L.R., Poshal G., Sundararajan G. Influence of electrolyte chemistry on morphology and corrosion resistance of micro arc oxidation coatings deposited on magnesium. Metall. Mater. Trans. A 2010, 41A:3499-3508.
158. Chen H.A., Lv G.H., Zhang G.L., Pang H., Wang X.Q., Lee H., Yang S.Z. Corrosion performance of plasma electrolytic oxidized AZ31 magnesium alloy in silicate solutions with different additives. Surf. Coat. Technol. 2010, 205:S32-S35.
159. Sreekanth D., Rameshbabu N., Venkateswarlu K. Effect of various additives on morphology and corrosion behavior of ceramic coatings developed on AZ31 magnesium alloy by plasma electrolytic oxidation. Ceram. Int. 2012, 38:4607-4615.
160. Shen M.J., Wang X.J., Zhang M.F. High-compactness coating grown by plasma electrolytic oxidation on AZ31 magnesium alloy in the solution of silicate-borax. Appl. Surf. Sci. 2012, 259:362-366.
161. Guo H.F., An M.Z. Effect of surfactants on surface morphology of ceramic coatings fabricated on magnesium alloys by micro-arc oxidation. Thin Solid Films 2006, 500:186-189.
162. 3 solutions. J. Electrochem. Soc. 1998, 145:190-193.
163. Zhu F., Wang J.W., Li S.H., Zhang J. Preparation and characterization of anodic films on AZ31B Mg alloy formed in the silicate electrolytes with ethylene glycol oligomers as additives. Appl. Surf. Sci. 2012, 258:8985-8990.
164. Ryu H.S., Hong S.H. Corrosion resistance and antibacterial properties of Ag-containing MAO coatings on AZ31 magnesium alloy formed by microarc oxidation. J. Electrochem. Soc. 2010, 157:C131-C136.
165. 2-containing coatings on AZ31 magnesium alloys prepared by plasma electrolytic oxidation. Corros. Sci. 2012, 62:104-111.
166. P/AZ31 magnesium matrix composite. J. Alloy. Compd. 2009, 482:208-212.
167. Seyfoori A., Mirdamadi S., Seyedraoufi Z.S., Khavandi A., Aliofkhazraei M. Synthesis of biphasic calcium phosphate containing nanostructured films by micro arc oxidation on magnesium alloy. Mater. Chem. Phys. 2013, 142:87-94.
168. 3 on energy consumption of micro-arc oxidation of magnesium alloy. Rare Metal Mat. Eng. 2012, 41:187-189.
169. Blawert C., Heitmann V., Dietzel W., Nykyforchyn H.M., Klapkiv M.D. Influence of electrolyte on corrosion properties of plasma electrolytic conversion coated magnesium alloys. Surf. Coat. Technol. 2007, 201:8709-8714.
170. Laleh M., Rouhaghdam A.S., Shahrabi T., Shanghi A. Effect of alumina sol addition to micro-arc oxidation electrolyte on the properties of MAO coatings formed on magnesium alloy AZ91D. J. Alloy. Compd. 2010, 496:548-552.
171. Li W.P., Tang M.Q., Zhu L.Q., Liu H.C. Formation of microarc oxidation coatings on magnesium alloy with photocatalytic performance. Appl. Surf. Sci. 2012, 258:10017-10021.
172. Ma C.X., Zhang M.L., Yuan Y., Jing X.Y., Bai X.F. Tribological behavior of plasma electrolytic oxidation coatings on the surface of Mg-8Li-1Al alloy. Tribol. Int. 2012, 47:62-68.
173. 3 particles on AZ31 magnesium alloy. Surf. Coat. Technol. 2013, 236:52-57.
174. Liu Y.P., Zhang D.F., Chen C.G., Zhang J.G., Cui L.B. Adsorption orientation of sodium of polyaspartic acid effect on anodic films formed on magnesium alloy. Appl. Surf. Sci. 2011, 257:7579-7585.
175. Guo X.H., Du K.Q., Wang Y.Q., Shao Y.W., Wang F.H. A new nanoparticle penetrant used for plasma electrolytic oxidation film coated on AZ31 Mg alloy in service environment. Surf. Coat. Technol. 2012, 206:4833-4839.
176. Gao L.L., Zhang C.H., Zhang M.L., Huang X.M., Jiang X. Phytic acid conversion coating on Mg-Li alloy. J. Alloy. Compd. 2009, 485:789-793.
177. Cui X.F., Li Q.F., Li Y., Wang F.H., Jin G., Ding M.H. Microstructure and corrosion resistance of phytic acid conversion coatings for magnesium alloy. Appl. Surf. Sci. 2008, 255:2098-2103.
178. Tang F., Wang X.Y., Xu X.J., Li L.D. Phytic acid doped nanoparticles for green anticorrosion coatings. Colloid Surf. A 2010, 369:101-105.
179. Cui X.F., Li Y., Li Q.F., Jin G., Ding M.H., Wang F.H. Influence of phytic acid concentration on performance of phytic acid conversion coatings on the AZ91D magnesium alloy. Mater. Chem. Phys. 2008, 111:503-507.
180. Srinivasan P.B., Scharnagl N., Blawert C., Dietzel W. Enhanced corrosion protection of AZ31 magnesium alloy by duplex plasma electrolytic oxidation and polymer coatings. Surf. Eng. 2010, 26:354-360.
181. Wang J.W., Tang J.W., He Y.D. Top coating of low-molecular weight polymer MALPB used for enhanced protection on anodized AZ31B Mg alloys. J. Coat. Technol. Res. 2010, 7:737-746.
182. Chen M.A., Cheng N., Li J.M., Liu S.Y. Improvement to corrosion resistance of Ni-P coating on MAO magnesium alloy by BTESPT. Surf. Eng. 2012, 28:491-497.
183. Sreekanth D., Rameshbabu N. Development and characterization of MgO/hydroxyapatite composite coating on AZ31 magnesium alloy by plasma electrolytic oxidation coupled with electrophoretic deposition. Mater. Lett. 2012, 68:439-442.
184. Chu C.L., Han X., Xue F., Bai J., Chu P.K. Effects of sealing treatment on corrosion resistance and degradation behavior of micro-arc oxidized magnesium alloy wires. Appl. Surf. Sci. 2013, 271:271-275.
185. Tang H., Yu D.Z., Luo Y., Wang F.P. Preparation and characterization of HA microflowers coating on AZ31 magnesium alloy by micro-arc oxidation and a solution treatment. Appl. Surf. Sci. 2013, 264:816-822.
186. Yang W., Wang A.Y., Jiang B.L. Corrosion resistance of composite coating on magnesium alloy using combined microarc oxidation and inorganic sealing. T. Nonferr. Metal. Soc. 2012, 22:S760-S763.
187. Wen L., Wang Y.M., Zhou Y., Guo L.X., Ouyang J.H. Microstructure and corrosion resistance of modified 2024 Al alloy using surface mechanical attrition treatment combined with microarc oxidation process. Corros. Sci. 2011, 53:473-480.
188. Wen L., Wang Y.M., Zhou Y., Ouyang J.H., Guo L.X., Jia D.C. Corrosion evaluation of microarc oxidation coatings formed on 2024 aluminium alloy. Corros. Sci. 2010, 52:2687-2696.
189. Ryu H.S., Park D.S., Hong S.H. Improved corrosion protection of AZ31 magnesium alloy through plasma electrolytic oxidation and aerosol deposition duplex treatment. Surf. Coat. Technol. 2013, 219:82-87.
190. Renk T.J., Provencio P.P., Prasad S.V., Shlapakovski A.S., Petrov A.V., Yatsui K., Jiang W.H., Suematsu H. Materials modification using intense ion beams. Proc. IEEE 2004, 92:1057-1081.
191. Davis H.A., Remnev G.E., Stinnett R.W., Yatsui K. Intense ion-beam treatment of materials. MRS Bull. 1996, 21:58-62.
192. Jamesh M., Wu G.S., Zhao Y., Chu P.K. Effects of silicon plasma ion implantation on electrochemical corrosion behavior of biodegradable Mg-Y-RE alloy. Corros. Sci. 2013, 69:158-163.
193. Jamesh M.I., Wu G.S., Zhao Y., McKenzie D.R., Bilek M.M.M., Chu P.K. Effects of zirconium and oxygen plasma ion implantation on the corrosion behavior of ZK60 Mg alloy in simulated body fluids. Corros. Sci. 2014, 82:7-26.
194. Liu C.L., Xin Y.C., Tian X.B., Chu P.K. Corrosion behavior of AZ91 magnesium alloy treated by plasma immersion ion implantation and deposition in artificial physiological fluids. Thin Solid Films 2007, 516:422-427.
195. Wang X.M., Zeng X.Q., Wu G.S., Yao S.S., Lai Y.J. Effects of tantalum ion implantation on the corrosion behavior of AZ31 magnesium alloys. J. Alloy. Compd. 2007, 437:87-92.
196. Wu G.S., Ding K.J., Zeng X.Q., Wang X.M., Yao S.S. Improving corrosion resistance of titanium-coated magnesium alloy by modifying surface characteristics of magnesium alloy prior to titanium coating deposition. Scripta Mater. 2009, 61:269-272.
197. Wan Y.Z., Xiong G.Y., Luo H.L., He F., Huang Y., Wang Y.L. Influence of zinc ion implantation on surface nanomechanical performance and corrosion resistance of biomedical magnesium-calcium alloys. Appl. Surf. Sci. 2008, 254:5514-5516.
198. Han X.G., Zhu F., Zhu X.P., Lei M.K., Xu J.J. Electrochemical corrosion behavior of modified MAO film on magnesium alloy AZ31 irradiated by high-intensity pulsed ion beam. Surf. Coat. Technol. 2013, 228:S164-S170.
199. Han X.G., Zhu F., Zhu X.P., Lei M.K., Xu J.J. The effect of high-intensity pulsed ion beam on surface structures of MAO film on magnesium alloy AZ31. Nucl. Instrum. Meth. B 2013, 307:107-110.
200. Dey A., Rani R.U., Thota H.K., Sharma A.K., Bandyopadhyay P., Mukhopadhyay A.K. Microstructural, corrosion and nanomechanical behaviour of ceramic coatings developed on magnesium AZ31 alloy by micro arc oxidation. Ceram. Int. 2013, 39:3313-3320.
201. Gnedenkov S.V., Sinebryukhov S.L., Mashtalyar D.V., Egorkin V.S., Sidorova M.V., Gnedenkov A.S. Composite polymer-containing protective coatings on magnesium alloy MA8. Corros. Sci. 2014, 85:52-59.
202. Hwang D.Y., Kim Y.A., Shin D.H. Corrosion resistance of plasma-anodized AZ91 Mg alloy in the electrolyte with/without potassium fluoride. Mater. Trans. 2009, 50:671-678.
203. Arrabal R., Matykina E., Viejo F., Skeldon P., Thompson G.E. Corrosion resistance of WE43 and AZ91D magnesium alloys with phosphate PEO coatings. Corros. Sci. 2008, 50:1744-1752.
204. Lv G.H., Chen H.A., Wang X.Q., Pang H., Zhang G.L., Zou B., Lee H.J., Yang S.Z. Effect of additives on structure and corrosion resistance of plasma electrolytic oxidation coatings on AZ91D magnesium alloy in phosphate based electrolyte. Surf. Coat. Technol. 2010, 205:S36-S40.
205. Heakal F.E., Tantawy N.S., Shehata O.S. Impact of chloride and fluoride additions on surface reactivity and passivity of AM60 magnesium alloy in buffer solution. Corros. Sci. 2012, 64:153-163.
206. Liang J., Srinivasan P.B., Blawert C., Dietzel W. Influence of pH on the deterioration of plasma electrolytic oxidation coated AM50 magnesium alloy in NaCl solutions. Corros. Sci. 2010, 52:540-547.
207. Ivanou D.K., Starykevich M., Lisenkov A.D., Zheludkevich M.L., Xue H.B., Lamaka S.V., Ferreira M.G.S. Plasma anodized ZE41 magnesium alloy sealed with hybrid epoxy-silane coating. Corros. Sci. 2013, 73:300-308.
208. Cheong W.J., Luan B.L., Shoesmith D.W. Protective coating on Mg AZ91D alloy - the effect of electroless nickel (EN) bath stabilizers on corrosion behaviour of Ni-P deposit. Corros. Sci. 2007, 49:1777-1798.
209. Kirkland N.T., Lespagnol J., Birbilis N., Staiger M.P. A survey of bio-corrosion rates of magnesium alloys. Corros. Sci. 2010, 52:287-291.
210. Zeng R.C., Ke W., Xu Y.B., Han E.H., Zhu Z.Y. Recent development and application of magnesium alloys. Acta Metall. Sin. 2001, 37:673-685.
211. Khan R.H.U., Yerokhin A.L., Pilkington T., Leyland A., Matthews A. Residual stresses in plasma electrolytic oxidation coatings on Al alloy produced by pulsed unipolar current. Surf. Coat. Technol. 2005, 200:1580-1586.
212. Khan R.H.U., Yerokhin A., Li X., Dong H., Matthews A. Surface characterisation of DC plasma electrolytic oxidation treated 6082 aluminium alloy: effect of current density and electrolyte concentration. Surf. Coat. Technol. 2010, 205:1679-1688.
213. Van Boven G., Chen W., Rogge R. The role of residual stress in neutral pH stress corrosion cracking of pipeline steels. Part I: pitting and cracking occurrence. Acta Mater. 2007, 55:29-42.
214. Stoney G.G. The tension of metallic films deposited by electrolysis. Proc. R. Soc. Lond. A 1909, 82:172-175.
215. Klein C.A. How accurate are Stoney's equation and recent modifications. J. Appl. Phys. 2000, 88:5487-5489.
216. Khan R.H.U., Yerokhin A.L., Matthews A. Structural characteristics and residual stresses in oxide films produced on Ti by pulsed unipolar plasma electrolytic oxidation. Philos. Mag. 2008, 88:795-807.