Accuracy of an adjustable patientspecific guide for acetabular alignment in hip replacement surgery (Optihip)

Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine

Volumn 228, Issue 9, 2014, Pages 876-889

  Shandiz, Mohsen Akbari ^a,b   Mackenzie, James R ^a,b   Hunt, Stephen ^a,b   Anglin, Carolyn ^a,b  

^a UNIVERSITY OF CALGARY   (Canada)

^b UNIVERSITY OF CALGARY   (Canada)

Author keywords

Accuracy; Acetabular cup; Depth; Inclination; Mechanical guide; Orientation; Total hip arthroplasty; Version

Indexed keywords

ARTHROPLASTY; CRYSTAL ORIENTATION; HIP PROSTHESES; ORTHOPEDICS;

ACCURACY; ACETABULAR CUP; DEPTH; INCLINATION; MECHANICAL GUIDE; TOTAL HIP ARTHROPLASTY; VERSION;

COMPUTERIZED TOMOGRAPHY;

ACETABULUM; AGED; BONE NAIL; COMPUTER ASSISTED SURGERY; DEVICES; FEMALE; HIP ARTHROPLASTY; HIP PROSTHESIS; HUMAN; JOINT CHARACTERISTICS AND FUNCTIONS; MALE; PROCEDURES; SURGERY; VERY ELDERLY;

ACETABULUM; AGED; AGED, 80 AND OVER; ARTHROPLASTY, REPLACEMENT, HIP; BONE NAILS; FEMALE; HIP PROSTHESIS; HUMANS; MALE; RANGE OF MOTION, ARTICULAR; SURGERY, COMPUTER-ASSISTED;

EID: 84913535823     PISSN: 09544119     EISSN: 20413033     Source Type: Journal    
DOI: 10.1177/0954411914548469     Document Type: Article

References (46)

1. Lewinnek GE, Lewis JL, Tarr R, et al. Dislocations after total hip-replacement arthroplasties. J Bone Joint Surg Am 1978; 60(2): 217-220.
2. Hart AJ, Ilo K, Underwood R, et al. The relationship between the angle of version and rate of wear of retrieved metal-on-metal resurfacings: a prospective, CT-based study. J Bone Joint Surg Br 2011; 93(3): 315-320.
3. Morlock MM, Bishop N, Zustin J, et al. Modes of implant failure after hip resurfacing: morphological and wear analysis of 267 retrieval specimens. J Bone Joint Surg Am 2008; 90(Suppl. 3): 89-95.
4. De Haan R, Campbell PA, Su EP, et al. Revision of metal-on-metal resurfacing arthroplasty of the hip: The influence of malpositioning of the components. J Bone Joint Surg Br 2008; 90(9): 1158-1163.
5. Langton DJ, Jameson SS, Joyce TJ, et al. Early failure of metal-on-metal bearings in hip resurfacing and largediameter total hip replacement: a consequence of excess wear. J Bone Joint Surg Br 2010; 92(1): 38-46.
6. Mahoney CR and Pellicci PM. Complications in primary total hip arthroplasty: avoidance and management of dislocations. Instr Course Lect 2003; 52: 247-255.
7. Widmer K-H. Containment versus impingement: finding a compromise for cup placement in total hip arthroplasty. Int Orthop 2007; 31(Suppl. 1): S29-S33.
8. Callanan MC, Jarrett B, Bragdon CR, et al. The John Charnley Award: risk factors for cup malpositioning: quality improvement through a joint registry at a tertiary hospital. Clin Orthop Relat Res 2011; 469(2): 319-329.
9. Wixson RL. Computer-assisted total hip navigation. Instr Course Lect 2008; 57: 707-720.
10. DiGioia AM III, Jaramaz B, Nikou C, et al. Surgical navigation for total hip replacement with the use of Hip- Nav. Operat Tech Orthop 2000; 10(1): 3-8.
11. Nolte LP and Beutler T. Basic principles of CAOS. Injury 2004; 35(Suppl. 1): SA6-SA16.
12. Haimerl M, Schubert M, Wegner M, et al. Anatomical relationships of human pelvises and their application to registration techniques. Comput Aided Surg 2012; 17(5): 232-239.
13. Hananouchi T, Saito M, Koyama T, et al. Tailor-made surgical guide reduces incidence of outliers of cup placement. Clin Orthop Relat Res 2010; 468(4): 1088-1095.
14. Kunz M and Rudan JF. Navigating cup orientation with individualized guides during hip resurfacing. In: Davies BL, Joskowicz L and Merloz P (eds) 10th annual meeting of the International Society for Computer Assisted Orthopaedic Surgery CAOS-International, Versailles, 16-19 June 2010.
15. Steppacher SD, Kowal JH and Murphy SB. Improving cup positioning using a mechanical navigation instrument. Clin Orthop Relat Res 2011; 469: 423-428.
16. Murtha PE, Hafez MA, Jaramaz B, et al. Variations in acetabular anatomy with reference to total hip replacement. J Bone Joint Surg Br 2008; 90(3): 308-313.
17. DiGioia AM, Hafez MA, Jaramaz B, et al. Functional pelvic orientation measured from lateral standing and sitting radiographs. Clin Orthop Relat Res 2006; 453: 272- 276.
18. Dardenne G, Dusseau S, Hamitouche C, et al. Toward a dynamic approach of THA planning based on ultrasound. Clin Orthop Relat Res 2009; 467(4): 901-908.
19. Lazennec JY, Riwan A, Gravez F, et al. Hip spine relationships: application to total hip arthroplasty. Hip Int 2007; 17(Suppl. 5): S91-104.
20. Lazennec J-Y, Brusson A and Rousseau M-A. Hip-spine relations and sagittal balance clinical consequences. Eur Spine J 2011; 20(Suppl. 5): 686-698.
21. Lazennec J-Y, Boyer P, Gorin M, et al. Acetabular anteversion with CT in supine, simulated standing, and sitting positions in a THA patient population. Clin Orthop Relat Res 2011; 469(4): 1103-1109.
22. Kalteis T, Handel M, Herold T, et al. Position of the acetabular cup-accuracy of radiographic calculation compared to CT-based measurement. Eur J Radiol 2006; 58(2): 294-300.
23. McGann WA. Acetabular total hip component alignment system for accurate intra operative positioning in inclination. US patent 6, 214, 014, 2001.
24. Abe H, Sakai T, Hamasaki T, et al. Is the transverse acetabular ligament a reliable cup orientation guide? Acta Orthop 2012; 83(5): 474-480.
25. Pearce CJ, Sexton SA, Davies DC, et al. The transverse acetabular ligament may be used to align the acetabular cup in total hip arthroplasty. Hip Int 2008; 18(1): 7-10.
26. Viste A, Chouteau J, Testa R, et al. Is transverse acetabular ligament an anatomical landmark to reliably orient the cup in primary total hip arthroplasty? Orthop Traumatol Surg Res 2011; 97(3): 241-245.
27. Haaker R, Tiedjen K, Rubenthaler F, et al. Computer assisted navigated cup placement in primary and secondary dysplastic hips. Z Orthop Ihre Grenzgeb 2003; 141(1): 105-111.
28. Ehlke M, Ramm H, Lamecker H, et al. Fast generation of virtual X-ray images for reconstruction of 3D anatomy. IEEE Trans Vis Comput Graph 2013; 19(12): 2673-2682.
29. Lazennec JY, Rousseau MA, Rangel A, et al. Pelvis and total hip arthroplasty acetabular component orientations in sitting and standing positions: measurements reproductibility with EOS imaging system versus conventional radiographies. Orthop Traumatol Surg Res 2011; 97(4): 373-380.
30. Ho KCT, Saevarsson SK, Ramm H, et al. Computed tomography analysis of knee pose and geometry before and after total knee arthroplasty. J Biomech 2012; 45(13): 2215-2221.
31. Seim H, Kainmueller D and Heller M. Automatic segmentation of the pelvic bones from CT data based on a statistical shape model. In: C. P. Botha, G. Kindlmann, W. J. Niessen et al. (eds) Euro graphics workshop on visual computing for biomedicine, Delft, 6-7 October 2008, pp.93-100. The Eurographics Association 2008.
32. Ha Y-C, Yoo JJ, Lee Y-K, et al. Acetabular component positioning using anatomic landmarks of the acetabulum. Clin Orthop Relat Res 2012; 470(12): 3515-3523.
33. Anglin C, Akbari Shandiz M, MacKenzie J, et al. Apparatus and method for positioning of acetabular components during hip arthroplasty procedures. Patent application PCT/CA2013/000895, 2013.
34. Murphy WS, Steppacher SD, Kowal JH, et al. Can the surgeon's eye replace the optical camera for acetabular component alignment? In: 11th annual meeting of the International Society for Computer Assisted Orthopaedic Surgery, London, 15-19 June 2011.
35. Anda S, Svenningsen S, Grontvedt T, et al. Pelvic inclination and spatial orientation of the acetabulum. A radiographic, computed tomographic and clinical investigation. Acta Radiol 1990; 31(4): 389-394.
36. Tannast M, Langlotz U, Siebenrock K-A, et al. Anatomic referencing of cup orientation in total hip arthroplasty. Clin Orthop Relat Res 2005; 436: 144-150.
37. DiGioia AM, Jaramaz B, Plakseychuk AY, et al. Comparison of a mechanical acetabular alignment guide with computer placement of the socket. J Arthroplasty 2002; 17(3): 359-364.
38. Saxler G, Marx A, Vandevelde D, et al. The accuracy of free-hand cup positioning-a CT based measurement of cup placement in 105 total hip arthroplasties. Int Orthop 2004; 28(4): 198-201.
39. Kalteis T, Handel M, Bäthis H, et al. Imageless navigation for insertion of the acetabular component in total hip arthroplasty: is it as accurate as CT-based navigation? J Bone Joint Surg Br 2006; 88(2): 163-167.
40. Bosker BH, Verheyen CCPM, Horstmann WG, et al. Poor accuracy of freehand cup positioning during total hip arthroplasty. Arch Orthop Trauma Surg 2007; 127(5): 375-379.
41. Parratte S and Argenson J-NA. Validation and usefulness of a computer-assisted cup-positioning system in total hip arthroplasty. A prospective, randomized, controlled study. J Bone Joint Surg Am 2007; 89(3): 494-499.
42. Perlick L, Kalteis T, Tingart M, et al. Cup and stem navigation with the VectorVision system. In: Stiehl JB, Konermann WH, Haaker RG, et al. (eds) Navigation and MIS in orthopedic surgery. Berlin, Heidelberg: Springer, 2007, pp.378-384.
43. Sugano N, Nishii T, Miki H, et al. Mid-term results of cementless total hip replacement using a ceramic-onceramic bearing with and without computer navigation. J Bone Joint Surg Br 2007; 89(4): 455-460.
44. Babisch JW, Layher F and Amiot L-P. The rationale for tilt-adjusted acetabular cup navigation. J Bone Joint Surg 2008; 90(2): 357-365.
45. Hananouchi T, Takao M, Nishii T, et al. Comparison of navigation accuracy in THA between the mini-anterior and -posterior approaches. Int J Med Robot 2009; 5(1): 20-25.
46. Tang WM and Chiu KY. Primary total hip arthroplasty in patients with ankylosing spondylitis. J Arthroplasty 2000; 15(1): 52-58.