A review on the Pd-based three-way catalyst

Catalysis Reviews - Science and Engineering

Volumn 57, Issue 1, 2015, Pages 79-144

  Wang, Jihui ^a   Chen, Hong ^a   Hu, Zhicheng ^b   Yao, Mingfa ^a   Li, Yongdan ^a  

^a TIANJIN UNIVERSITY   (China)

^b Weifu Environmental Catalysts Co Ltd   (China)

Author keywords

Catalyst configuration; Mechanism and kinetics; Oxygen storage capacity; Palladium; Three way catalyst

Indexed keywords

CATALYSIS; CATALYST ACTIVITY; CATALYST POISONING; CATALYTIC OXIDATION; EXHAUST GASES; OXYGEN;

CATALYTIC PERFORMANCE; DEACTIVATION MECHANISM; MECHANISM AND KINETICS; OXYGEN STORAGE CAPACITY; OXYGEN STORAGE MATERIALS; THREE WAY CATALYSTS; THREE-WAY CATALYSIS; VEHICLE EXHAUST GAS;

PALLADIUM;

EID: 84913531303     PISSN: 01614940     EISSN: 15205703     Source Type: Journal    
DOI: 10.1080/01614940.2014.977059     Document Type: Review

References (220)

1. Twigg, M.V.; Progress and future challenges in controlling automotive exhaust gas emissions, Appl. Catal. B: Environ. 2007, 70, 2-15.
2. Heck, R.M.; Farrauto, R.J.; Automobile exhaust catalysts, Appl. Catal. A: Gen. 2001, 221, 443-457.
3. Summers, J.C.; Hegedus, L.L.; Effects of platinum and palladium impregnation on the performance and durability of automobile exhaust oxidizing catalysts, J. Catal. 1978, 51, 185-192.
4. 3 TWCs' washcoat: Effect of synthesis procedure on catalytic behaviour and thermal durability, Appl. Catal. B: Environ. 2009, 90, 162-174.
5. Gandhi, H.S.; Piken, A.G.; Shelef, M.; Delosh, R.G.; Laboratory evaluation of three-way catalysts. SAE Paper 760201, 1976.
6. Twigg, M.V.; Automotive exhaust emissions control, Platinum Metals Rev. 2003, 47, 157-162.
7. Shim, W.G.; Jung, S.C.; Seo, S.G.; Kim, S.C.; Evaluation of regeneration of spent three-way catalysts for catalytic oxidation of aromatic hydrocarbons, Catal. Today 2011, 164, 500-506.
8. Lucena, P.; Vadillo, J.M.; Laserna, J.J.; Mapping of platinum group metals in automotive exhaust three-way catalysts using laser-induced breakdown spectrometry, Anal. Chem. 1999, 71, 4385-4391.
9. Kašpar, J.; Fornasiero, P.; Hickey, N.; Automotive catalytic converters: current status and some perspectives, Catal. Today 2003, 77, 419-449.
10. 2 three-way catalyst, J. Rare Earth 2011, 29, 217-224.
11. Han, Z.; Wang, J.; Yan, H.; Shen, M.; Wang, J.; Wang, W.; Yang, M.; Performance of dynamic oxygen storage capacity, water-gas shift and steam reforming reactions over Pd-only three-way catalysts, Catal. Today 2010, 158, 481-489.
12. 2 solid solutions, J. Catal. 1996, 162, 1-9.
13. Ozawa, M.; Role of cerium-zirconium mixed oxides as catalysts for car pollution: A short review, J. Alloy. Comp. 1998, 275-277, 886-890.
14. 2 powders, J. Alloy. Compd. 2000, 303-304, 56-59.
15. Voltz, S.E.; Morgan, C.R.; Liederman, D.; Jacob, S.M.; Kinetic study of carbon monoxide and propylene oxidation on platinum catalysts, Ind. Eng. Chem. Prod. Res. Develop. 1973, 12, 294-301.
16. Dwyer, F.G.; Catalysis for control of automotive emissions. Catal. Rev.-Sci. Eng. 1972, 6, 261-291.
17. Graham, J.R.; Catalytic control of auto exhaust emissions, US Patent, 1973, 3741725.
18. Meguerian, G.H.; Hirschberg, E.H.; Rakowsky, F.W.; Catalyst for treating exhaust gas from internal combustion engine, US Patent, 1977, 4006103.
19. Hegedus, L.; Summers, J.C.; Platinum-rhodium for automotive emission control. US Patent, 1978, 4128506.
20. Acres, G.J.K.; Cooper, B.J.; Automobile emission control systems-platinum catalysts for exhaust purification, Platinum. Metals. Rev. 1972, 16, 74-86.
21. Hu, Z.; Allen, F.M.; Wan, C.Z.; Heck, R.M.; Steger, J.J.; Lakis, R.E.; Lyman, C.E.; Performance and structure of Pt-Rh three-way catalysts: mechanism for Pt/Rh synergism, J. Catal. 1998, 174, 13-21.
22. Hu, Z.; A Pt-Rh synergism in Pt/Rh three-way catalysts, Chem. Commun. 1996, 879-880.
23. Matsuura, S.; Hirai, A.; Arimura, K.; Shinjoh, H.; Development of three-way catalyst with using only Pd as activator, SAE Paper 950257, 1995.
24. Gandhi, H.S.; Graham, G.W.; McCabe, R.W.; Automotive exhaust catalysis, J. Catal. 2003, 216, 433-442.
25. Chattha, M.S.; Watkins, W.L.H.; Gandhi, H.S.; Three-way catalyst for automotive emission control and method of making the catalyst, US Patent, 1991, 4992405.
26. Shelef, M.; McCabe, R.W.; Twenty-five years after introduction of automotive catalysts: what next, Catal. Today 2000, 62, 35-50.
27. Lui, Y.K.; Dettling, J.C.; Evolution of Pd/Rh TWC catalyst technology. SAE Paper 930249, 1993.
28. Graham, G.W.; Potter, T.; Baird, R.J.; Gandhi, H.S.; Shelef, M.; Surface composition of polycrystalline Pd15Rh following high temperature oxidation in air, J. Vacuum. Sci. Technol. A 1986, 4, 1613-1616.
29. Nunan, J.G.; Williamson, W.B.; Robota, H.J.; Henk, M.G.; Impact of Pt-Rh and Pd-Rh interactions on performance of bimetal catalysts, SAE Paper 950258, 1995.
30. Summers, J.C.; Skowron, J.F.; Miller, M.J.; Use of light-off catalysts to meet the California LEV/ULEV standards, SAE Paper 930386, 1993.
31. Lindner, D.; Lox, E.X.; van Yperen, R.; Ostgathe, K.; Reduction of exhaust gas emissions by using pd-based three-way catalysts, SAE Paper 960802, 1996.
32. Cullis, C.F.; Willatt, B.M.; Oxidation of methane over supported precious metal catalysts, J. Catal. 1983, 83, 267-285.
33. Yao, Y.F.Y; The oxidation of CO and hydrocarbons over noble metal catalysts, J. Catal. 1984, 87, 152-162.
34. Gandhi, H.S.; Shelef, M.; Effects of sulphur on noble metal automotive catalysts, Appl. Catal. 1991, 77, 175-186.
35. Gandhi, H.S.; Williamson, W.B.; Logothetis, E.M.; Tabock, J.; Peters, C.; Hurley, M.D.; Shelef, M.; Affinity of lead for noble metals on different supports, Surf. Interface Anal. 1984, 6, 149-161.
36. Twigg, M.V.; Catalytic control of emissions from cars, Catal. Today 2011, 163, 33-41.
37. Shelef, M.; Graham, G.W.; Why rhodium in automotive three-way catalysts, Catal. Rev.-Sci. Eng. 1994, 36, 433-457.
38. Noh, J.; Yang, O.B.; Kim, D.H.;Woo, S.I.; Characteristics of the Pd-only three-way catalysts prepared by sol-gel method, Catal. Today 1999, 53, 575-582.
39. Muraki, H.; Shinjoh, H.; Fujitani, Y.; Effect of lanthanum on the no reduction over palladium catalysts, Appl. Catal. 1986, 22, 325-335.
40. Fernández-García, M.; Iglesias-Juez, A.; Martínez-Arias, A.; Hungría, A.B.; Anderson, J.A.; Conesa, J.C.; Soria, J.; Role of the state of the metal component on the light-off performance of Pd-based three-way catalysts, J. Catal. 2004, 221, 594-600.
41. Iglesias-Juez, A.; Martínez-Arias, A.; Newton, M.A; Fiddy, S. G.; Fernández- García, M.; Redox behaviour of Pd-based TWCs under dynamic conditions: analysis using dispersive XAS and mass spectrometry, Chem. Commun. 2005, 4092-4094.
42. Lu, Y.; Kumar, M. S.; Chiarello, G. L.; Eggenschwiler, P. D.; Bach, C.; Weilenmann, M.; Spiteri, A.; Weidenkaff, A.; Ferri, D.; Operando XANES study of simulated transient cycles on a Pd-only three-way catalyst, Catal. Commun. 2013, 39, 55-59.
43. Iglesias-Juez, A.; Kubacka, A.; Martínez-Arias, A.; Di Michiel, M.; Newton, M.A; Nanoparticulate Pd Supported Catalysts: Size-Dependent Formation of Pd(I)/Pd(0) and Their Role in CO Elimination, J. Amer. Chem. Soc. 2011, 133, 4484-4489.
44. Brisley, R.J.; Chandler, G.R.; Jones, H.R.; Anderson, P.J.; Shady, P.J.; The use of palladium in advanced catalysts, SAE Paper 950259, 1995.
45. Hu, Z.; Heck, R.M.; High temperature ultra-stable close-coupled catalysts. SAE Paper 1995, 950254.
46. Kang, S.B.; Han, S. J.; Nam, S.B.; Nam, I.; Cho, B.K.; Kim, C.H.; Oh, S.H.; Activity function describing the effect of Pd loading on the catalytic performance of modern commercial TWC, Chem. Eng. J. 2012, 207-208, 117-121.
47. 3 as advanced materials for three-way catalysts Part 1. Catalyst characterisation, thermal stability and catalytic activity in the reduction of NO by CO, Appl. Catal. B: Environ. 2000, 24, 157-167.
48. Mamede, A.S.; Leclercq, G.; Payen, E.; Grimblot, J.; Granger, P.; Surface Raman spectroscopic study of NO transformation over Pd-based catalysts, Phys. Chem. Chem. Phys. 2003, 5, 4402-4406.
49. 3 model three-way catalysts, Appl. Catal. B: Environ. 2005, 60, 117-127.
50. 3: a suitable method for the production of thermally stable oxygen storage/release promoters for three-way catalysts, Chem. Commun. 2000, 2167-2168.
51. Shen, M.; Song, L.; Wang, J.; Wang, X.; Improved palladium only three-way catalysts using phosphorus modified alumina support, Catal. Commun. 2012, 22, 28-33.
52. Ozawa, M.; Kimura, M.; Effect of cerium addition on the thermal stability of gamma alumina support, J. Mater. Sci. Lett. 1990, 9, 291-293.
53. Shyu, J.Z.; Weber, W.H.; Gandhi, H.S.; Surface characterization of aluminasupported ceria, J. Phys. Chem. 1988, 92, 4964-4970.
54. Piras, A.; Trovarelli, A.; Dolcetti, G.; Remarkable stabilization of transition alumina operated by ceria under reducing and redox conditions, Appl. Catal. B: Environ. 2000, 28, 77-81.
55. Shyu, J.Z.; Otto, K.; Watkins, W.L.H.; Graham, G.W.; Belitz, R.K.; Ganhdi, H.S.; Characterization of Pd/ -Alumina catalysts containing ceria, J. Catal. 1988, 114, 23-33.
56. Burtin, P.; Brunelle, J.P.; Pijolat, M.; Soustelle, M.; Influence of surface area and additives on the thermal stability of transition alumina catalyst supports. I: Kinetic data, Appl. Catal. 1987, 34, 225-238.
57. 3, Chem. Mater. 2003, 15, 4830-4840.
58. 3, J. Phys. Chem. C 2008, 112, 9486-9492.
59. 2-based oxides in the threeway catalysis, Catal. Today 1999, 50, 285-298.
60. Kim, G.; Ceria-promoted three-way catalysts for auto exhaust emission control, Ind. Eng. Chem. Prod. Res. Dev. 1982, 21, 267-274.
61. Tagliaferri, S.; Köppel, R.A.; Baiker, A.; Influence of rhodium-and ceriapromotion of automotive palladium catalyst on its catalytic behaviour under steady-state and dynamic operation, Appl. Catal. B: Environ. 1998, 15, 159-177.
62. Sanchez, M.G.; Gazquez, J.L.; Oxygen vacancy model in strong metal-support interaction, J. Catal. 1987, 104, 120-135.
63. Holles, J.H.; Davis, R.J.; Murray, T.M.; Howe, J.M.; Effects of Pd particle size and ceria loading on NO reduction with CO, J. Catal. 2000, 195, 193-206.
64. 3 catalysts, Appl. Catal. B: Environ. 2000, 26, 241-255.
65. Yao, H.C.; Yao, Y.F.Y.; Ceria in automotive exhaust catalysts, J. Catal. 1984, 86, 254-265.
66. 2 measurements, Ind. Eng. Chem. Res. 2007, 46, 7883-7890.
67. 3 model three-way catalysts, J. Phys. Chem. C 2009, 113, 12778-12789.
68. Descorme, C.; Taha, R., Mouaddib-Moral, N.; Duprez, D.; Oxygen storage capacity measurements of three-way catalysts under transient conditions, Appl. Catal. A: Gen. 2002, 223, 287-299.
69. Shelef, M.; Graham, G.W.; McCabe, R.W.; Ceria and other oxygen storage components in automotive catalysts, in: Trovarelli, A. (Ed.), Catalysis by Ceria and Related Materials; Imperial College Press, London, 2002, pp. 343-371.
70. Tomohisa, O.; Kazuo, T.; Shinya, K.; Catalyst for purifying exhaust gas and method for production thereof, European Patent, 1989, 0337809 (A2).
71. 3 three-way catalysts: model gas and engine tests, J. Catal. 2001, 204, 238-248.
72. 2 solid solutions for three-way catalysts, SAE Paper 970463, 1997.
73. 3 complex oxides prepared by a microemulsion method. Phys. Chem. Chem. Phys. 2002, 4, 2473-2481.
74. Ozawa, M.; Kimura, M.; Isogai, A.; The application of Ce-Zr oxide solid solution to oxygen storage promoters in automotive catalysts, J. Alloy. Compd. 1993, 193, 73-75.
75. 2 mixed oxides in the CO + NO reactions: influence of Pd incorporation, Top. Catal. 2001, 16-17, 89-94.
76. Jen, H.W.; Graham, G.W.; Chun, W.; McCabe, R.W.; Cuif, J.P.; Deutsch, S.E.; Touret, O.; Characterization of model automotive exhaust catalysts: Pd on ceria and ceria-zirconia supports, Catal. Today 1999, 50, 309-328.
77. 2 solid-solutions as highly efficient oxygen exchangers: dependence of the reduction Behavior and the oxygen storage capacity on the structural-properties, J. Catal. 1995, 151, 168-177.
78. 2 solid solutions, J. Phys. Chem. B 1997, 101, 1750-1753.
79. 2 catalysts, J. Phys. Chem. B 1998, 102, 557-561.
80. Graham, G.W.; Jen, H.W.; McCabe, R.W.; Straccia, A.W.; Haack, L.P.; Characterization of model automotive exhaust catalysts: Pd on Zr-rich ceriazirconia supports, Catal. Lett. 2000, 67, 99-105.
81. 2, J. Catal. 1996, 164, 173-183.
82. 2 mixed oxides after redox cycling aging, Catal. Today 2000, 59, 373-386.
83. 2 mixed oxides I. Influence of redox treatments on high surface area catalysts, Appl. Catal. B: Environ. 2000, 27, 49-63.
84. Fernandes, D.M.; Scofield, C.F.; Neto, A.A.; Cardoso, M.J.B.; Zotin, F.M.Z.; The influence of temperature on the deactivation of commercial Pd/Rh automotive catalysts, Process Saf. Environ. 2009, 87, 315-322.
85. 2, Appl. Catal. B: Environ. 2001, 31, 51-60.
86. 3 three-way catalysts prepared by microemulsion Part 1. Characterization and catalytic behavior for CO oxidation, Appl. Catal. B: Environ. 2001, 31, 39-50.
87. Kubacka, A.; Iglesias-Juez, A.; Di Michiel, M.; Newton, M.A.; Fernández-García, M.; Influence of the Ce-Zr promoter on Pd behavior under dynamic CO/NO cycling conditions: a structural and chemical approach, Phys. Chem. Chem. Phys. 2013, 15, 8640-8647.
88. Skoglundh, M.; Johansson, H.; Lijwendahl, L.; Jansson, K.; Dahl, L.; Hirschauer, B.; Cobalt-promoted palladium as a three-way catalyst, Appl. Catal. B: Environ. 1996, 7, 299-319.
89. Logan, D.A.; Graham, G.W.; NO chemisorption on Pd (100) with ultra-thin overlayers of oxidized La and Al, Surf. Sci. Lett. 1992, 277, 47-51.
90. Muraki, H.; Yokota, K.; Fujitani, Y.; Nitric oxide reduction performance of automotive palladium catalysts, Appl. Catal. 1989, 48, 93-105.
91. Shinjoh, H.; Rare earth metals for automotive exhaust catalysts, J. Alloy. Compd. 2006, 408-412, 1061-1064.
92. Muraki, H.; Shinjoh, H.; Sobukawa, H.; Yokota, K.; Fujitani, Y.; Palladiumlanthanum catalysts for automotive emission control, Ind. Eng. Chem. Prod. Res. Dev. 1986, 25, 202-208.
93. Adams, K.M.; Gandhi, H.S.; Palladium-tungsten catalysts for automotive exhaust treatment, Ind. Eng. Chem. Prod. Res. Dev. 1983, 22, 207-212.
94. 3, Appl. Catal. B: Environ. 1993, 2, 131-146.
95. 3 of low molybdena loading, Catal. Lett. 1992, 16, 311-321.
96. 3 catalysts for NO reduction by CO, J. Catal. 1999, 185, 138-151.
97. Noronha, F.B.; Baldanza, M.A.S.; Schmal, M.; CO and NO adsorption on Alumina-Pd-Mo catalysts: effect of the precursor salts, J. Catal. 1999, 188, 270-280.
98. Neyertz, C.; Volpe, M.; Preparation of binary palladium-vanadium supported catalysts from metal acetylacetonates, Colloids Surf. A 1998, 136, 63-69.
99. Kim, D.H.; Woo, S.I.; Noh, J.; Yang, O.B.; Synergistic effect of vanadium and zirconium oxides in the Pd-only three-way catalysts synthesized by sol-gel method, Appl. Catal. A: Gen. 2001, 207, 69-77.
100. Yentekakis, I.V.; Lambert, R.M.; Tikhov, M.S.; Konsolakis, M.; Kiousis, V.; Promotion by sodium in emission control catalysis: a kinetic and spectroscopic study of the Pd-catalyzed reduction of NO by propene, J. Catal. 1998, 176, 82-92.
101. 3 catalysts operated under simulated "Three-Way" conditions. J. Catal. 2001, 198, 128-135.
102. Sekiba, T.; Kimura, S.; Yamamoto, H.; Okada, A.; Development of automotive palladium three-way catalysts, Catal. Today 1994, 22, 113-126.
103. Shinjoh, H.; Isomura, N.; Sobukawa, H.; Sugiura, M.; Effect of alkaline addition on hydrocarbon oxidation activities of palladium three-way catalyst, Stud. Surf. Sci. Catal. 1998, 116, 83-91.
104. Kobayashi, T.; Yamada, T.; Kayano, K.; Effect of basic metal additives on NOx reduction property of Pd-based three-way catalyst, Appl. Catal. B: Environ. 2001, 30, 287-292.
105. Mikulova, J.; Rossignol, S.; Gérard, F.; Mesnard, D.; Kappenstein, C.; Duprez, D.; Properties of cerium-zirconium mixed oxides partially substituted by neodymium: Comparison with Zr-Ce-Pr-O ternary oxides, J. Solid State Chem. 2006, 179, 2511-2520.
106. 3 solid solution and its catalytic performances, J. Alloy. Compd. 2008, 460, 485-490.
107. 2 mixed oxides, Solid State Sci. 2007, 9, 636-643.
108. 2 solid solution modified by praseodymia in three-way catalysts, J. Rare Earth 2003, 21, 430-435.
109. Wang, Q.Y.; Li, G.F.; Zhao, B.; Zhou, R.X.; Investigation on properties of a novel ceria-zirconia -praseodymia solid solution and its application in Pd-only threeway catalyst for gasoline engine emission control, Fuel 2011, 90, 3047-3055.
110. Wang, Q.Y.; Li, G.F.; Zhao, B.; Zhou, R.X.; The effect of Nd on the properties of ceria-zirconia solid solution and the catalytic performance of its supported Pdonly three-way catalyst for gasoline engine exhaust reduction, J. Hazard. Mater. 2011, 189, 150-157.
111. Wang, Q.Y.; Li, G.F.; Zhao, B.; Zhou, R.X.; The effect of rare earth modification on ceria-zirconia solid solution and its application in Pd-only three-way catalyst, J. Mol. Catal. A: Chem. 2011, 339, 52-60.
112. 2 mixed oxide, J. Catal. 1997, 171, 160-168.
113. 2 solid solutions, Colloids Surf. A 1999, 151, 435-447.
114. Hu, Y.C.; Hydrothermal synthesis of nano Ce-Zr-Y oxide solid solution for automotive three-way catalyst, J. Amer. Ceram. Soc. 2006, 89, 2949-2951.
115. Yamamoto, M.; Tanaka, H.; Influence of support materials on durability of palladium in three-way catalyst, SAE Paper 980664, 1998.
116. Yamada, K.; Tanaka, H.; Yamamoto, M.; Oxygen storage capacity on cerium oxide-precious metal system, SAE Paper 970464, 1997.
117. 3 (M = Y, Ca or Ba) used for the total oxidation of propane, Fuel 2010, 89, 2244-2251.
118. 3 calcined at super high temperature and used for C3H8 total oxidation, Fuel 2013, 103, 799-804.
119. 2 on the properties and catalytic behaviour of Pd-only three-way catalyst for automotive emission control, J. Hazard. Mater. 2011, 186, 911-920.
120. 2 three-way catalyst before and after aging, Appl. Catal. B: Environ. 2010, 97, 41-48.
121. 2 and its application in Pd-only three-way catalysts for automotive emission control, Fuel 2012, 92, 360-368.
122. 2 (x = 0.75, 0.62) solid solution and its application in Pd-only three-way catalysts. Catal. Today 2007, 126, 296-302.
123. 3 on Pd Close- Coupled Catalysts. Chin, J. Catal. 2011, 32, 589-594.
124. 3 catalysts used for stoichiometric CO and NO elimination. Part 1: Nanoscopic characterization of the catalysts, J. Catal. 2005, 235, 251-261.
125. 3 catalysts used for stoichiometric CO and NO elimination. Part 2: Catalytic activity and in situ spectroscopic studies, J. Catal. 2005, 235, 262-271.
126. 3 and Pd-Cu/(Ce,Zr)Ox catalysts for CO and NO elimination, J. Catal. 2002, 206, 281-294.
127. Illas, F.; López, N.; Ricart, J. M.; Clotet, A.; Conesa, J.C.; Fernández-García, M.; Interaction of CO and NO with PdCu(111) surfaces, J. Phys. Chem. B 1998, 102, 8017-8023.
128. Iglesias-Juez, A.; Hungría, A.B.; Martínez-Arias, A.; Anderson, J.A.; Fernández- García, M.; Pd-based (Ce,Zr)Ox-supported catalysts: Promoting effect of base metals (Cr, Cu, Ni) in CO and NO elimination, Catal. Today 2009, 143, 195-202.
129. 2 mixed oxides catalyst for automotive exhaust emissions control, Catal. Today 2004, 96, 165-170.
130. Zhou, K.B.; Chen, H.D.; Tian, Q.; Hao, Z.P.; Shen, D.X.; Xu, X.B.; Pd-containing perovskite-type oxides used for three-way catalysts, J. Mol. Catal. A: Chem. 2002, 189, 225-232.
131. Nishihata, Y.; Mizuki, J.; Akao, T.; Tanaka, H.; Uenishi, M.; Kimura, M.; Okamoto, T.; Hamadak, N.; Self-regeneration of a Pd-perovskite catalyst for automotive emissions control, Nature 2002, 418, 164-167.
132. 3-supported Pd catalysts, Appl. Catal. A: Gen. 1995, 133, 59-65.
133. Uenishi, M.; Taniguchi, M.; Tanaka, H.; Kimura, M.; Nishihata, Y.; Mizuki, J.; Kobayashi, T.; Redox behavior of palladium at start-up in the perovskitetype LaFePdOx automotive catalysts showing a self-regenerative function, Appl. Catal. B: Environ. 2005, 57, 267-273.
134. 2 by Combustion Method: Effect of metal-ceria interaction on catalytic activities for NO reduction and CO and hydrocarbon oxidation, J. Catal. 2000, 196, 293-301.
135. 2: A superior de-NOx catalyst to Pt or Rh metal ion doped ceria, Catal. Commun. 2008, 9, 811-815.
136. Kim, D.H.; Woo, S.I.; Yang, O.B.; Effect of pH in a sol-gel synthesis on the physicochemical properties of Pd-alumina three-way catalyst, Appl. Catal. B: Environ. 2000, 26, 285-289.
137. 3 catalysts, Catal. Today 2001, 65, 77-89.
138. Zhu, Z.; Lu, G.; Guo, Y.; Guo, Y.; Zhang, Z.; Wang, Y.; Influences of Pd precursors and preparation method on the catalytic performances of Pd-only close-coupled catalysts, J. Ind. Eng. Chem. 2012, 18, 2135-2140.
139. van den Tillaart, J.A.A.; Leyrer, J.; Eckhoff, S.; Lox, E.S.; Effect of support oxide and noble metal precursor on the activity of automotive diesel catalysts, Appl. Catal. B: Environ. 1996, 10, 53-68.
140. Kim, D.H.; Woo, S.I.; Lee, J.M.; Yang, O.B.; The role of lanthanum oxide on Pd-only three-way catalysts prepared by co-impregnation and sequential impregnation methods, Catal. Lett. 2000, 70, 35-41.
141. Garcia, T.; Weng, W.H.; Solsona, B.J.; Carter, E.; Carley A.F.; Kiely, C.J.; Taylor, S.H.; The significance of the order of impregnation on the activity of vanadia promoted palladium-alumina catalysts for propane total oxidation, Catal. Sci. Technol. 2011, 1, 1367-1375.
142. Wang, Q.Y.; Li, Z.G.; Zhao, B.; Li, G.F.; Zhou, R.X.; Effect of synthesis method on the properties of ceria-zirconia modified alumina and the catalytic performance of its supported Pd-only three-way catalyst, J. Mol. Catal. A: Chem. 2011, 344, 132-137.
143. 2 aerogels, J. Mater. Chem. 1996, 6, 1025-1029.
144. 2 mixed oxides by a surfactant-assisted approach, Catal. Today 1998, 43, 79-88.
145. 2 catalyst for NO reduction by CO with excess oxygen, Appl. Surf. Sci. 2005, 243, 319-328.
146. 2- supported palladium catalysts, Appl. Catal. A: Gen. 1999, 189, 15-21.
147. Chen, H.R.; Ye, Z.Q.; Cui, X.Z.; Shi, J.L.; Yan, D.S.; A novel mesostructured alumina-ceria-zirconia tri-component nanocomposite with high thermal stability and its three-way catalysis, Micropor. Mesopor. Mat. 2011, 143, 368-374.
148. 2 catalysts prepared by high-energy mechanical milling, J. Catal. 1997, 169, 490-502.
149. Gallopoulos, N.E.; Bridging the present to the future in personal transportationthe role of internal combustion engines, SAE Paper 920721, 1992.
150. Laing, P.M.; Development of an alternator-powered electrically-heated catalyst system, SAE Paper 941042, 1994.
151. Kim, D.J.; Kim, J.W.; Yie, J.E.; Temperature-programmed adsorption and characteristics of honeycomb hydrocarbon adsorbers, Ind. Eng. Chem. Res. 2002, 41, 6589-6592.
152. Chen, S.F.; Amundsen, A.R.; Rabinowitz, H.N.; Yamada, T.; The development of a close coupled plus underfloor catalyst for a ULEV application, SAE Paper 960796, 1996.
153. Matsumoto, S.; Recent advances in automobile exhaust catalyst, Catal. Surv. Jpn. 1997, 1, 111-117
154. Härkönen, M.; Kivioja, M.; Lappi, P.; Mannila, P.; Maunula, T.; Slotte, T.; Performance and durability of palladium only metallic three-way catalyst, SAE Paper 940935, 1994.
155. Beck, D.D.; Sommers, J.W.; Impact of sulfur on the performance of vehicle-aged palladium monoliths. Appl. Catal. B: Environ. 1995, 6, 185-200.
156. Heck, R.M.; Hu, Z.; Smaling, R.; Amundsen, A.; Close coupled catalyst system design and ULEV performance after 1050°C aging, SAE Paper 952415, 1995.
157. Hu, Z.; Heck, R.M.; Rabinowitz, H.N.; Close-coupled catalyst, US Patent, 2000, 6044644.
158. Hu, Z.; Heck, R.M.; Rabinowitz, H.N.; Method for using a close-coupled catalyst, US Patent, 2001, 6254842B1.
159. Williamson, W.B.; Richmond, R.P.; Nunan, J.G.; Bortun, A.; Robota, H.J.; Palladium and platinum/rhodium dual-catalyst NLEV and tier II a close-coupled emission solutions. SAE Paper 2001-01-0923, 2001.
160. Williamson, W.B.; Dou, D.; Robota, H.J.; Dual-catalyst undefloor LEV/ULEV strategies for effective precious metal management, SAE Paper 1999-01-0776, 1999.
161. 2 (NM: noble metal) catalysts, Catal. Today 1999, 50, 175-206.
162. Hu, Z.; Wan, C.Z.; Lui, Y.K.; Dettling, J.; Layered catalyst composite, US Patent, 1997, 5597771.
163. Hu, Z.; Wan, C.Z.; Lui, Y.K.; Dettling, J.; Steger, J.J.; Design of a novel Pd threeway catalyst: integration of catalytic functions in three dimensions, Catal. Today 1996, 30, 83-89.
164. Aoki, Y.; Sakagami, S.; Kawai, M.; Takahashi, N.; Tanabe, T.; Sunada, T.; Development of advanced zone-coated three-way catalysts, SAE Paper 2011-01- 0296, 2011.
165. Taylor, K.C. Nitric oxide catalysis in automotive exhaust systems, Catal. Rev.- Sci. Eng. 1993, 35, 457-481.
166. Muraki, H.; Shinjoh, H.; Fujitani, Y.; Reduction of NO by CO over aluminasupported palladium catalyst, Ind. Eng. Chem. Prod. Res. Dev. 1986, 25, 419-424.
167. Holles, J.H.; Switzer, M.A.; Davis, R.J.; Influence of ceria and lanthana promoters on the kinetics of NO and N2O reduction by CO over alumina-supported palladium and rhodium, J. Catal. 2000, 190, 247-260.
168. Mamede, A.S.; Leclercq, G.; Payen, E.; Granger, P.; Grimblot, J.; In situ Raman characterisation of surface modifications during NO transformation over automotive Pd-based exhaust catalysts, J. Mol. Struct. 2003, 651-653, 353-364.
169. Hamdaoui, A.E.; Bergeret, G.; Massardier, J.; Primet, M.; Renouprez, A.; CO and NO interaction with Pd-Ag and Pd-Cr bimetallic catalysts, J. Catal. 1994, 148, 47-55.
170. Granger, P.; Dhainaut, F.; Pietrz, S.; Malfoy, P.; Mamede, A.S.; Leclercq, L.; Leclercq, G.; An overview: Comparative kinetic behaviour of Pt, Rh and Pd in the NO + CO and NO + H2 reactions, Top. Catal. 2006, 39, 65-76.
171. 3 catalysts, J. Phys. Chem. B 1997, 101, 10769-10774.
172. 3 catalysts, J. Catal. 1997, 167, 234-241.
173. 3 by selective enhancement and selective poisoning, J. Catal. 1998, 180, 161-170.
174. 3, J. Catal. 1999, 184, 189-201.
175. 3 catalysts, Appl. Catal. A: Gen. 2003, 239, 121-139.
176. Newton, M.A.; Di Michiel, M.; Kubacka, A.; Fernández-García, M.; Combining time-resolved hard x-ray diffraction and diffuse reflectance infrared spectroscopy to illuminate CO dissociation and transient carbon storage by supported Pd nanoparticles during CO/NO cycling, J. Amer. Chem. Soc. 2010, 132, 4540-4541.
177. 3, Catal. Today 2013, 205, 3-9.
178. 2 and NO over Pd (100), J. Phys. Chem. 1993, 97, 5445-5446.
179. Kubacka, A.; Martínez-Arias, A.; Fernández-García, M.; Di Michiel, M.; Newton, M. A.; Multitechnique analysis of supported Pd particles upon dynamic, cycling CO/NO conditions: Size-dependence of the structure-activity relationship, J. Catal. 2010, 270, 275-284.
180. Newton, M. A.; Di Michiel, M.; Kubacka, A.; Iglesias-Juez, A.; Fernández-García, M.; Observing oxygen storage and release at work during cycling redox conditions: synergies between noble metal and oxide promoter, Angew. Chem. Int. Ed. 2012, 51, 2363-2367.
181. 3: the key role of transient NCO formation in the subsequent generation of ammonia, Appl. Catal. B: Environ. 2003, 46, 483-495.
182. Kobylinski, T.P.; Taylor, B.W.; The catalytic chemistry of nitric oxide: II. Reduction of nitric oxide over noble metal catalysts, J. Catal. 1974, 33, 376-384.
183. Dhainaut, F.; Pietrzyk, S.; Granger, P.; Kinetics of the NO + H2 reaction over supported noble metal based catalysts: Support effect on their adsorption properties, Appl. Catal. B: Environ. 2007, 70, 100-110.
184. Dhainaut, F.; Pietrzyk, S.; Granger, P.; Kinetic investigation of the NO reduction by H2 over noble metal based catalysts, Catal. Today 2007, 119, 94-99.
185. Paredis, K.; Ono, L. K.; Behafarid, F.; Zhang, Z.; Yang, J.C.; Frenkel, A.I.; Cuenya, B.R.; Evolution of the structure and chemical state of Pd nanoparticles during the in situ catalytic reduction of NO with H2, J. Amer. Chem. Soc. 2011, 133, 13455-13464.
186. Chambers, D.C.; Angove, D.E.; Cant, N.W.; The formation and hydrolysis of isocyanic acid during the reaction of NO, CO, and H2 mixtures on supported platinum, palladium, and rhodium, J. Catal. 2001, 204, 11-22.
187. Rahkamaa-Tolonen, K.; Salmi,T.; Murzin, D.Y.; Dillon, L.B.; Lassi, U.; Keiski, R. L.; Investigation of NO reduction by H2 on Pd monolith with transient and isotopic exchange techniques II. H2/D2 exchange in the reduction of NO, J. Catal. 2002, 210, 30-38.
188. Oh, S. H.; Triplett, T.; Reaction pathways and mechanism for ammonia formation and removal over palladium-based three-way catalysts: Multiple roles of CO, Catal. Today 2014, 231, 22-32.
189. Schwab, G. M.; Gossner, K.; The carbon monoxide combustion via silver, palladium and their alloy, Z. Phys. Chem. 1958, 16, 39-63 (in German).
190. Engel, T.; Ertl, G.; A molecular beam investigation of the catalytic oxidation of CO on Pd (111), J. Chem. Phys. 1978, 69, 1267-1281.
191. Szanyi, J.; Kuhn, K.; Goodman, D.W.; CO oxidation on palladium. 2. A combined kinetic-infrared reflection absorption spectroscopic study of Pd (111), J. Phys. Chem. 1994, 98, 2978-2981.
192. Xu, X.; Goodman, D.W.; An infrared and kinetic study of CO oxidation on model silica-supported palladium catalysts from 10-9 to 15 Torr, J. Phys. Chem. 1993, 97, 7711-7718.
193. 2 exposure, Phys. Chem. Chem. Phys. 2012, 14, 4796-4801.
194. Parker, S. F.; The role of hydroxyl groups in low temperature carbon monoxide oxidation, Chem. Commun. 2011, 47, 1988-1990.
195. 3 catalysts, Chem. Commun. 2008, 320-322.
196. Rajasree, R.; Hoebink, J.H.B.J.; Schouten, J.C.; Transient kinetics of carbon monoxide oxidation by oxygen over supported palladium/ceria/zirconia threeway catalysts in the absence and presence of water and carbon dioxide, J. Catal. 2004, 223, 36-43.
197. 3, Kinet. Catal. 2008, 49, 22-30.
198. Petrova, M.V.; Williams, F.A.; A small detailed chemical-kinetic mechanism for hydrocarbon combustion, Combust. Flame 2006, 144, 526-544.
199. Ma, L.; Bart, H.; Ning, P.; Zhang, A.; Wu, G.; Zhu, Z.; Kinetic study of threeway catalyst of automotive exhaust gas: Modeling and application, Chem. Eng. J. 2009, 155, 241-247.
200. 3 catalyst, Chem. Eng. Proc. 1995, 34, 469-478.
201. Cullis, C. F.; Nevell, T. G.; The kinetics of the catalytic oxidation over palladium of some alkanes and cycloalkanes, Proc. R. Soc. Lond. A 1976, 349, 523-534.
202. Yao, Y.F.Y.; Oxidation of alkanes over noble metal catalysts, Ind. Eng. Chem. Prod. Res. Dev. 1980, 19, 293-298.
203. Aryafar, M.; Zaera, F.; Kinetic study of the catalytic oxidation of alkanes over nickel, palladium, and platinum foils, Catal. Lett. 1997, 48, 173-183.
204. 3 catalysts: effect of thermal aging, J. Catal. 2004, 221, 148-161.
205. Xu, Q.; Kharas, K.C.; Croley, B.J.; Datye, A.K.; The sintering of supported Pd automotive catalysts, Chem. Cat, Chem. 2011, 3, 1004-1014.
206. Birgersson, H.; Boutonnet, M.; Klingstedt, F.; Murzin, D.Y.; Stefanov, P.; Naydenov, A.; An investigation of a new regeneration method of commercial aged three-way catalysts, Appl. Catal. B: Environ. 2006, 65, 93-100.
207. Williamson, W.B.; Lewis, D.; Perry, J.; Gandhi, H.S.; Durability of Palladium Automotive Catalysts: Effects of trace lead levels, exhaust composition, and misfueling, Ind. Eng. Chem. Prod. Res. Dev. 1984, 23, 531-536.
208. Hansen,T. W.; Delariva, A. T.; Challa,S. R.; Datye, A. K.; Sintering of catalytic nanoparticles: particle migration or ostwald ripening?, Acc. Chem. Res. 2013, 46, 1720-1730.
209. Wynblatt,P.; Gjostein,N.; A. Supported metal crystallites, Prog. Solid State Chem. 1975, 9, 21-58.
210. McCarty, J. G.;Malukhin, G.; Poojary, D. M.; Datye, A. K.; Xu, Q.; Thermal coarsening of supported palladium combustion catalysts, J. Phys. Chem. B 2005, 109, 2387-2391.
211. Kang, S.B.; Kwon, H.J.; Nam, I.S.; Activity function for describing alteration of three-way catalyst performance over palladium-only three-way catalysts by catalyst mileage, Ind. Eng. Chem. Res. 2011, 50, 5499-5509.
212. Datye, A.K.; Bravo, J.; Nelson, T.R.; Atanasova, P.; Lyubovsky, M.; Pfefferle, L.; Catalyst microstructure and methane oxidation reactivity during the Pd-PdO transformation on alumina supports, Appl. Catal. A: Gen. 2000, 198, 179-196.
213. Kang, S. B.; Han, S. J.; Nam, S. B.; Nam, I.S.; Cho, B. K.; Kim, C. H.; Oh, S. H.; Effect of Aging Atmosphere on Thermal Sintering of Modern Commercial TWCs, Top. Catal. 2013, 56, 298-305.
214. 3 catalysts, Appl. Catal. B: Environ. 2002, 38, 151-158.
215. Heo, I.; Choung, J.W.; Kim, P.-S.; Nam, I.S.; Song, Y.L.; In, C.B.; Yeo, G.K.; The alteration of the performance of field-aged Pd-based TWCs towards CO and C3H6 oxidation, Appl. Catal. B: Environ. 2009, 92, 114-125.
216. Xu, L.; Guo, G.; Dairene, U.; O'Neill, A.E.; Weber, W.H.; Rokosz, M.J.; McCabe, R.W.; Cerium phosphate in automotive exhaust catalyst poisoning, Appl. Catal. B: Environ. 2004, 50, 113-125.
217. O'Neill, A.E.; Dairene, U.; Raman studies of automotive catalyst deactivation, SAE Paper 2006-01-0409, 2006.
218. 2 model three-way catalyst by P, Ca and Zn deposition, Appl. Catal. B: Environ. 2012, 111-112, 233-245.
219. 2 on the oxygen storage capacity of ceria-based catalysts, Catal. Lett. 2000, 70, 131-135.
220. 2, Top. Catal. 2001, 16-17, 299-306.