Viscosity of the oil-in-water Pickering emulsion stabilized by surfactant-polymer and nanoparticle-surfactant-polymer system

Korea Australia Rheology Journal

Volumn 26, Issue 4, 2014, Pages 377-387

  Sharma, Tushar ^a,b   Suresh Kumar, G ^a   Chon, Bo Hyun ^c   Sangwai, Jitendra S ^a  

^a INDIAN INSTITUTE OF TECHNOLOGY MADRAS   (India)

^b PANDIT DEENDAYAL PETROLEUM UNIVERSITY   (India)

^c Inha University   (South Korea)

Author keywords

Nanoparticle; Pickering emulsion; Polyacrylamide; Rheology; Surfactant

Indexed keywords

EID: 84912531895     PISSN: 1226119X     EISSN: 20937660     Source Type: Journal    
DOI: 10.1007/s13367-014-0043-z     Document Type: Article

References (36)

1. Alderman, N.J., 1988, High-temperature, high-pressure rheology of water-based muds, Proceedings of the Annual Technical Conference and Exhibition of the Society of Petroleum Engineers (SPE), Houston.
2. Binks, B.P., J.H. Clint, and C.P. Whitby, 2005, Rheological behavior of water-in-oil emulsions stabilized by hydrophobic bentonite particles, Langmuir 21, 5307-5316.
3. Binks, B.P. and A. Rocher, 2009, Effects of temperature on water-in-oil emulsions stabilised solely by wax microparticles, J. Colloid Interf. Sci. 335, 94-104.
4. Dickinson, E. and K. Pawlowsky, 1996, Effect of high-pressure treatment of protein on the rheology of flocculated emulsions containing protein and polysaccharide, J. Agr. Food Chem. 44, 2992-3000.
5. Dickinson, E. and J.D. James, 1999, Influence of competitive adsorption on flocculation and rheology of high-pressure-treated milk protein-stabilized emulsions, J. Agr. Food Chem. 47, 25-30.
6. English, R.J., J.H. Laurer, R.J. Spontak, and S.A. Khan, 2002, Hydrophobically modified associative polymer solutions: rheology and microstructure in the presence of nonionic surfactants, Ind. Eng. Chem. Res. 41, 6425-6435.
7. Erni, P., E.J. Windhab, R. Gunde, M. Graber, B. Pfisetr, A. Parker, and P. Fischer, 2007, Interfacial rheology of surfaceactive biopolymers: acacia senegal gum versus hydrophobically modifed starch, Biomacromolecules 8, 3458-3466.
8. Frith, W.J., R. Pichot, M. Kirkland, and B. Wolf, 2008, Formation, stability, and rheology of particle stabilized emulsions: influence of multivalent cations, Ind. Eng. Chem. Res. 47, 6434-6444.
9. Hermes, M. and P.S. Clegg, 2013, Yielding and flow of concentrated Pickering emulsions, Soft Matter 9, 7568-7575.
10. Houwen, O.H., 1986, Rheology of oil base muds, Proceedings of the Annual Technical Conference and Exhibition of the Society of Petroleum Engineers (SPE), New Orleans.
11. Jung, J., K. Zhang, B. Chon, and H. Choi, 2013, Rheology and polymer flooding characteristics of partially hydrolyzed polyacrylamide for oil recovery, J. Appl. Polym. Sci. 127, 4833-4839.
12. Kim, S. and C. Kim, 2012, The effects of particle concentration, ionic strength and shearing on the microstructure of alumina nanorod suspensions, Korea-Aust. Rheol. J. 24, 65-71.
13. Kundu, P., A. Agrawal, H. Mateen, and I.M. Mishra, 2013, Stability of oil-in-water macro-emulsion with anionic surfactant: effect of electrolytes and temperature, Chem. Eng. Sci. 102, 176-185.
14. Lan, Q., F. Yang, S. Zhang, S. Liu, J. Xu, and D. Sun, 2007, Synergistic effect of silica nanoparticle and cetyltrimethyl ammonium bromide on the stabilization of o/w emulsions, Colloids Surface A 302, 126-135.
15. Lequeux, F.P., 1998, Emulsion rheology, Curr. Opin. Colloid In. 3, 408-411.
16. Meister, M.J., G.K. Kettenbrink, and A.G. Collins, 1976, Enhanced oil recovery using improved aqueous fluid-injection methods: an annotated bibliography, Energy Research and Development Administration, Technical Information Center, Bartlesville, Oklahoma.
17. Ozel, B.G., A. Orum, M. Yildiz, and Y.Z. Menceloglu, 2014, Experimental study on the rheology of anisotropic, flocculated and low volume fraction colloids, Korea-Aust. Rheol. J. 26, 105-116.
18. Pal, R., 1992, Rheology of polymer-thickened emulsions, J. Rheol. 36, 1245-1259.
19. Pal, R., 1993, Rheological behavior of surfactant-flocculated water-in-oil emulsions, Colloids Surface A 71, 173-185.
20. Pal, R., 1999, Rheology of blends of suspensions and emulsions, Ind. Eng. Chem. Res. 38, 5005-5010.
21. Pei, H., G. Zhang, J. Ge, M. Tang, and Y. Zheng, 2012, Comparative effectiveness of alkaline flooding and alkaline-surfactant flooding for improved heavy-oil recovery, Energ. Fuel. 26, 2911-2919.
22. Perino, A., C. Noik, and C. Dalmazzone, 2013, Effect of fumed silica particles on water-in-crude oil emulsion: emulsion stability, interfacial properties, and contribution of crude oil fractions, Energ. Fuel. 27, 2399-2412.
23. Ponmani, S., J.K.M. William, R. Samuel, R. Nagarajan, and J.S. Sangwai, 2014, Formation and characterization of thermal and electrical properties of CuO and ZnO nanofluids in xanthan gum, Colloids Surface A 443, 37-43.
24. Pons, R., C. Solans, and ThF. Tadros, 1995, Rheological behavior of highly concentrated oil-in-water (o/w) emulsions, Langmuir 11, 1966-1971.
25. Saha, R.K., A. Biswas, and U.C. Goswami, 2011, A simple method for scanning electron microscopy (SEM) study of cladocera: bosmina (bosmina) tripurae, World J. Fish Marine Sci. 3, 71-78.
26. Sangwai, J.S., D.N. Saraf, and S.K. Gupta, 2006, Viscosity of bulk free radical polymerizing systems under near-isothermal and non-isothermal conditions, Polymer 47, 3028-3035.
27. Sangwai, J.S., D.N. Saraf, and S.K. Gupta, 2007, Dynamic viscoelastic properties of free radical bulk polymerizing systems under near-isothermal and non-isothermal conditions, Rheol. Acta 46, 455-468.
28. Sani, A.M. and S.N. Shah, 2001, Experimental investigation of xanthan foam rheology, Proceedings of the Society of Petroleum Engineers (SPE) Production and Operations Symposium, Oklahoma.
29. Sharma, T., G.S. Kumar, B.H. Chon, and J.S. Sangwai, 2014, Thermal stability of oil-in-water Pickering emulsion in the presence of nanoparticle, surfactant and polymer, J. Ind. Eng. Chem., DOI: http://dx.doi.org/10.1016/j.jiec.2014.07.026.
30. Steinborn, R. and D.L. Flock, 1983, The rheology of heavy crude oils and their emulsions, J. Can. Petrol. Technol. 22, 37-52.
31. Thijssen, J.H.J., A.B. Schofield, and P.S. Clegg, 2011, How do (fluorescent) surfactants affect particle-stabilized emulsions?, Soft Matter 7, 7965-7968.
32. Thomas, A., N. Gaillard, and C. Favero, 2012, Some key features to consider when studying acrylamide-based polymers for chemical enhanced oil recovery, Oil Gas Sci. Technol. 67, 887-902.
33. William, J.K.M., S. Ponmani, R. Samuel, R. Nagarajan, and J.S. Sangwai, 2014, Effect of CuO and ZnO nanofluids in xanthan gum on thermal, electrical and high pressure rheology of water based drilling fluids, J. Petrol. Sci. Eng. 117, 15-27.
34. Wolf, B., S. Lam, M. Kirkland, and W.J. Frith, 2007, Shear thickening of an emulsion stabilized with hydrophilic silica particles, J. Rheol. 51, 465-478.
35. Wu, S., 2013, Shear and elongational rheology of partially hydrolyzed polyacrylamide used for EOR, Appl. Rheol. 23, 53800-53807.
36. Zhang, T., A. Davidson, S.L. Bryant, and C. Huh, 2010, Nanoparticle-stabilized emulsions for applications in enhanced oil recovery, Proceedings of the Society of Petroleum Engineers (SPE) Improved Oil Recovery Symposium, Oklahoma.