Thermo-sensitive chitosan–cellulose derivative hydrogels: swelling behaviour and morphologic studies

Cellulose

Volumn 21, Issue 6, 2014, Pages 4531-4544

  Barros, Sandra Cerqueira ^a   da Silva, Ana Alves ^a   Costa, Diana Barbosa ^a   Cesarino, Ivana ^b,c   Costa, Carlos M ^a   Lanceros Méndez, Senentxu ^a   Pawlicka, Agnieszka ^c   Silva, Maria Manuela ^a  

^a UNIVERSITY OF MINHO   (Portugal)

^b SÃO PAULO STATE UNIVERSITY UNESP   (Brazil)

^c UNIVERSITY OF SÃO PAULO   (Brazil)

Author keywords

(Hydroxypropyl)methyl cellulose; Chitosan; LCST; Swelling

Indexed keywords

ATOMIC FORCE MICROSCOPY; BIOCOMPATIBILITY; BIODEGRADABILITY; BIOMOLECULES; BIOPOLYMERS; CELLULOSE; CHITOSAN; CROSSLINKING; FOURIER TRANSFORM INFRARED SPECTROSCOPY; SCANNING ELECTRON MICROSCOPY; SURFACE ROUGHNESS; SWELLING; TEXTILES;

ATTENUATED TOTAL REFLECTANCE FOURIER TRANSFORM INFRARED SPECTROSCOPY; LCST; LOW CRITICAL SOLUTION TEMPERATURES; LOW SURFACE ROUGHNESS; METHYL CELLULOSE; NATURAL BIOPOLYMERS; PHYSICAL CROSSLINKING; PHYSICAL INTERACTIONS;

HYDROGELS;

EID: 84911936313     PISSN: 09690239     EISSN: 1572882X     Source Type: Journal    
DOI: 10.1007/s10570-014-0442-9     Document Type: Article

References (55)

1. Alvarez-Lorenzo C, Blanco-Fernandez B, Puga AM, Concheiro A (2013) Crosslinked ionic polysaccharides for stimuli-sensitive drug delivery. Adv Drug Deliv Rev 65:1148–1171. doi:10.1016/j.addr.2013.04.016
2. Amaral IF, Granja PL, Melo LV, Saramago B, Barbosa MA (2006) Functionalization of chitosan membranes through phosphorylation: atomic force microscopy, wettability, and cytotoxicity studies. J Appl Polym Sci 102:276–284. doi:10.1002/app.23737
3. Anuar NK, Wui WT, Ghodgaonkar DK, Taib MN (2007) Characterization of hydroxypropylmethylcellulose films using microwave non-destructive testing technique. J Pharm Biomed Anal 43:549–557. doi:10.1016/j.jpba.2006.08.014
4. Baumgartner S, Lahajnar G, Sepe A, Kristl J (2002) Investigation of the state and dynamics of water in hydrogels of cellulose ethers by1H NMR spectroscopy. AAPS PharmSciTech 3:86–93. doi:10.1208/pt030436
5. Bhattarai N, Gunn J, Zhang M (2010) Chitosan-based hydrogels for controlled, localized drug delivery. Adv Drug Deliv Rev 62:83–99. doi:10.1016/j.addr.2009.07.019
6. Brogly M, Fahs A, Bistac S (2011) Surface properties of new-cellulose based polymer coatings for oral delivery systems. Polymer Preprints 52:1054–1055
7. Brugnerotto J, Lizardi J, Goycoolea FM, Argüelles-Monal W, Desbrières J, Rinaudo M (2001) An infrared investigation in relation with chitin and chitosan characterization. Polymer 42:3569–3580. doi:10.1016/S0032-3861(00)00713-8
8. Chang C, Zhang L (2011) Cellulose-based hydrogels: present status and application prospects. Carbohydr Polym 84:40–53. doi:10.1016/j.carbpol.2010.12.023
9. Chang C, Duan B, Cai J, Zhang L (2010) Superabsorbent hydrogels based on cellulose for smart swelling and controllable delivery. Eur Polym J 46:92–100. doi:10.1016/j.eurpolymj.2009.04.033
10. Cilurzo F, Selmin F, Minghetti P, Montanari L, Lenardi C, Orsini F, Poletti G (2005) Comparison between gamma and beta irradiation effects on hydroxypropylmethylcellulose and gelatin hard capsules. AAPS PharmSciTech 6:E586–E593. doi:10.1208/pt060473
11. Dhawade PP, Jagtap RN (2012) Characterization of the glass transition temperature of chitosan and its oligomers by temperature modulated differential scanning calorimetry. Adv Appl Sci Res 3:1372–1382
12. Duran S, Şolpan D, Güven O (1999) Synthesis and characterization of acrylamide–acrylic acid hydrogels and adsorption of some textile dyes. Nucl Instrum Methods Phys Res Sect B 151:196–199. doi:10.1016/s0168-583x(99)00151-2
13. Francis Suh JK, Matthew HWT (2000) Application of chitosan-based polysaccharide biomaterials in cartilage tissue engineering: a review. Biomaterials 21:2589–2598. doi:10.1016/S0142-9612(00)00126-5
14. Ganji F, Vasheghani-Farahani S, Vasheghani-Farahani E (2010) Theoretical description of hydrogel swelling: a review. Iran Polym J 19:375–398
15. Goycoolea FM, Heras A, Aranaz I, Galed G, Fernández-Valle ME, Argüelles-Monal W (2003) Effect of chemical crosslinking on the swelling and shrinking properties of thermal and pH-responsive chitosan hydrogels. Macromol Biosci 3:612–619. doi:10.1002/mabi.200300011
16. Guinesi LS, Cavalheiro ÉTG (2006) The use of DSC curves to determine the acetylation degree of chitin/chitosan samples. Thermochim Acta 444:128–133. doi:10.1016/j.tca.2006.03.003
17. Hamidi M, Azadi A, Rafiei P (2008) Hydrogel nanoparticles in drug delivery. Adv Drug Deliv Rev 60:1638–1649. doi:10.1016/j.addr.2008.08.002
18. Hiroki A, Tran HT, Nagasawa N, Yagi T, Tamada M (2009) Metal adsorption of carboxymethyl cellulose/carboxymethyl chitosan blend hydrogels prepared by Gamma irradiation. Radiat Phys Chem 78:1076–1080. doi:10.1016/j.radphyschem.2009.05.003
19. Huang RYM, Moon GY, Pal R (2001) Chitosan/anionic surfactant complex membranes for the pervaporation separation of methanol/MTBE and characterization of the polymer/surfactant system. J Membr Sci 184:1–15. doi:10.1016/S0376-7388(00)00604-9
20. Hussain S, Grandy DB, Reading M, Craig DQM (2004) A study of phase separation in peptide-loaded HPMC films using Tzero-modulated temperature DSC, atomic force microscopy, and scanning electron microscopy. J Pharm Sci 93:1672–1681. doi:10.1002/jps.20066
21. Jiang H, Su W, Caracci S, Bunning TJ, Cooper T, Adams WW (1996) Optical waveguiding and morphology of chitosan thin films. J Appl Polym Sci 61:1163–1171. doi:10.1002/(sici)1097-4628(19960815)61:7<1163:aid-app12>3.0.co;2-z
22. Kayı H, Tuncel SA, Elkamel A, Alper E (2005) Prediction of lower critical solution temperature of N-isopropylacrylamide–acrylic acid copolymer by an artificial neural network model. J Mol Model 11:55–60. doi:10.1007/s00894-004-0221-x
23. Kim SY, Cho SM, Lee YM, Kim SJ (2000) Thermo- and pH-responsive behaviors of graft copolymer and blend based on chitosan and N-isopropylacrylamide. J Appl Polym Sci 78:1381–1391. doi:10.1002/1097-4628(20001114)78:7<1381:aid-app90>3.0.co;2-m
24. Kwon J, Choi J (2013) Clothing insulation and temperature, layer and mass of clothing under comfortable environmental conditions. J Physiol Anthropol 32:11. doi:10.1186/1880-6805-32-11
25. Ladet S, David L, Domard A (2008) Multi-membrane hydrogels. Nature 452:76–79. http://www.nature.com/nature/journal/v452/n7183/suppinfo/nature06619_S1.html
26. Medel S, Manuel García J, Garrido L, Quijada-Garrido I, París R (2011) Thermo- and pH-responsive gradient and block copolymers based on 2-(2-methoxyethoxy)ethyl methacrylate synthesized via atom transfer radical polymerization and the formation of thermoresponsive surfaces. J Polym Sci A Polym Chem 49:690–700. doi:10.1002/pola.24480
27. Milosavljević NB, Ristić MĐ, Perić-Grujić AA, Filipović JM, Štrbac SB, Rakočević ZL, Krušić MTK (2011) Removal of Cu2+ ions using hydrogels of chitosan, itaconic and methacrylic acid: FTIR, SEM/EDX, AFM, kinetic and equilibrium study. Colloid Surf A Physicochem Eng Asp 388:59–69. doi:10.1016/j.colsurfa.2011.08.011
28. Mohammad MF, Ali AO (2008) Lower critical solution temperature determination of smart, thermosensitive N-isopropylacrylamide-alt-2-hydroxyethyl methacrylate copolymers: kinetics and physical properties. J Appl Polym Sci 110:2815–2825. doi:10.1002/app.28840
29. Nishimura H, Donkai N, Miyamoto T (1997) Temperature-responsive hydrogels from cellulose. Macromol Symp 120:303–313. doi:10.1002/masy.19971200130
30. Nosal WH, Thompson DW, Yan L, Sarkar S, Subramanian A, Woollam JA (2005) UV–vis–infrared optical and AFM study of spin-cast chitosan films. Colloid Surf B-Biointerfaces 43:131–137. doi:10.1016/j.colsurfb.2004.08.022
31. OriginLab C (2010) OriginPro, 8.5 SR1 edn., Northampton
32. Pal K, Banthia AK, Majumdar D (2009) Polymeric hydrogels: characterization and biomedical applications: a mini review. Des Monomers Polym 12:197–220. doi:10.1163/156855509X436030
33. Parida UK, Nayak AK, Binhani BK, Nayak PL (2011) Synthesis and characterization of chitosan-polyvinyl alcohol blended with cloisite 30B for controlled release of the anticancer drug curcumin. J Biomater Nanobiotechnol 2:414–425. doi:10.4236/jbnb.2011.24051
34. Parkova I, Vilumsone A (2011) Microclimate of Smart Garment. Mater Sci Text Cloth Technol 6:99–104
35. Pasqui D, De Cagna M, Barbucci R (2012) Polysaccharide-based hydrogels: the key role of water in affecting mechanical properties. Polymers 4:1517–1534. doi:10.3390/polym4031517
36. Patel A, Mequanint K (2011) Hydrogel biomaterials. Biomedical engineering: frontiers and challenges. InTech. doi:10.5772/24856
37. Pawlak A, Mucha M (2003) Thermogravimetric and FTIR studies of chitosan blends. Thermochim Acta 396:153–166. doi:10.1016/S0040-6031(02)00523-3
38. Peppas NA, Bures P, Leobandung W, Ichikawa H (2000) Hydrogels in pharmaceutical formulations. Eur J Pharm Biopharm 50:27–46. doi:10.1016/S0939-6411(00)00090-4
39. Rotta J (2008) Propriedades físico-químicas de soluções formadoras e de filmes de quitosana e hidroxipropilmetilcelulose. Dissertation, Universidade Federal de Santa Catarina
40. Ruel-Gariépy E, Leroux J-C (2004) In situ-forming hydrogels—review of temperature-sensitive systems. Eur J Pharm Biopharm 58:409–426. doi:10.1016/j.ejpb.2004.03.019
41. Sannino A, Demitri C, Madaghiele M (2009) Biodegradable cellulose-based hydrogels: design and applications. Materials 2:353–373. doi:10.3390/ma2020353
42. Sarkar N (1979) Thermal gelation properties of methyl and hydroxypropyl methylcellulose. J Appl Polym Sci 24:1073–1087. doi:10.1002/app.1979.070240420
43. Schittek B et al. (2001) Dermcidin: a novel human antibiotic peptide secreted by sweat glands. Nat Immunol 2:1133–1137. http://www.nature.com/ni/journal/v2/n12/suppinfo/ni732_S1.html
44. Schwall C, Banerjee I (2009) Micro- and nanoscale hydrogel systems for drug delivery and tissue engineering. Materials 2:577–612. doi:10.3390/ma2020577
45. Seo K-W, Kim D-J, Park K-N (2004) Swelling properties of poly(AM-co-AA)/chitosan pH sensitive superporous hydrogels. J Ind Eng Chem 10:794–800
46. Silva SS, Luna SM, Gomes ME, Benesch J, Pashkuleva I, Mano JF, Reis RL (2008) Plasma surface modification of chitosan membranes: characterization and preliminary cell response studies. Macromol Biosci 8:568–576. doi:10.1002/mabi.200700264
47. Slaughter BV, Khurshid SS, Fisher OZ, Khademhosseini A, Peppas NA (2009) Hydrogels in regenerative medicine. Adv Mater 21:3307–3329. doi:10.1002/adma.200802106
48. Tripathi S, Mehrotra GK, Dutta PK (2009) Physicochemical and bioactivity of cross-linked chitosan–PVA film for food packaging applications. Int J Biol Macromol 45:372–376. doi:10.1016/j.ijbiomac.2009.07.006
49. Vrana NE, Liu Y, McGuinness GB, Cahill PA (2008) Characterization of poly(vinyl alcohol)/chitosan hydrogels as vascular tissue engineering scaffolds. Macromol Symp 269:106–110. doi:10.1002/masy.200850913
50. Xu YX, Kim KM, Hanna MA, Nag D (2005) Chitosan–starch composite film: preparation and characterization. Ind Crops Prod 21:185–192. doi:10.1016/j.indcrop.2004.03.002
51. Yang X, Liu Q, Chen X, Yu F, Zhu Z (2008) Investigation of PVA/ws-chitosan hydrogels prepared by combined γ-irradiation and freeze–thawing. Carbohydr Polym 73:401–408. doi:10.1016/j.carbpol.2007.12.008
52. Yin J, Luo K, Chen X, Khutoryanskiy VV (2006) Miscibility studies of the blends of chitosan with some cellulose ethers. Carbohydr Polym 63:238–244. doi:10.1016/j.carbpol.2005.08.041
53. Zhang XH, Li J, Wang YY (2012) Effects of clothing ventilation openings on thermoregulatory responses during exercise. Indian J Fibre Text 37:162–171. doi:10.1109/ICBECS.2010.5462337
54. Zhang H, Zhang F, Wu J (2013) Physically crosslinked hydrogels from polysaccharides prepared by freeze–thaw technique. React Funct Polym 73:923–928. doi:10.1016/j.reactfunctpolym.2012.12.014
55. Wandrey C, Bartkowiak A, Harding SE (2010) Materials for encapsulation. In: Zuidam NJ, Nedovic VA (eds) Encapsulation technologies for active food ingredients and food processing. vol 3. Springer, New York. doi:10.1007/978-1-4419-1008-0