Synthetic adhesives for wood panels: Chemistry and technology - A critical review

Reviews of Adhesion and Adhesives

Volumn 2, Issue 1, 2014, Pages 85-125

  Pizzi, A ^a,b  

^a UNIVERSITÉ DE LORRAINE   (France)

^b KING ABDULAZIZ UNIVERSITY   (Saudi Arabia)

Author keywords

Isocyanates; Melamine formaldehyde; Melamine urea formaldehyde; Phenol formaldehyde; Urea formaldehyde; Wood panel adhesives

Indexed keywords

ADHESIVES; CHEMICAL BONDS; FORMALDEHYDE; METABOLISM; UREA;

ADHESIVES FOR WOOD; ISOCYANATE; MELAMINE UREA FORMALDEHYDES; MELAMINE-FORMALDEHYDE; PHENOL FORMALDEHYDE; PHENOL-FORMALDEHYDE; SYNTHETIC ADHESIVES; UREA FORMALDEHYDE; WOOD PANEL ADHESIVE; WOOD PANELS;

UREA FORMALDEHYDE RESINS;

EID: 84911455660     PISSN: 21680965     EISSN: 21680973     Source Type: Journal    
DOI: 10.7569/raa.2013.097317     Document Type: Article

References (150)

1. A. Pizzi (Ed.), Wood Adhesives, Chemistry and Technology, Vol. 1, Marcel Dekker, New York (1983).
2. A. Pizzi, Advanced Wood Adhesives Technology. Marcel Dekker, New York (1994).
3. nd edition, Marcel Dekker, New York (2003).
4. M. Dunky, Aminoplastic glue resins, in Duroplastics Vol. 10, W. Woebecken (Ed.), pp. 593-614, Carl Hanser, Munich (1988).
5. M. Dunky, Urea-formaldehyde glue resins, in Polymeric Materials Encyclopedia Vol. 11, J.C. Salamone (Ed.), CRC Press, Boca Raton, FL (1996).
6. K. Lederer, Aminoplaste, in Polymere Werkstoffe Vol. III, H. Batzer (Ed.), pp. 95-291, G. Thieme, Stuttgart (1984).
7. B. Meyer, Urea-Formaldehyde Resins. Addison-Wesley, London (1979).
8. H. Petersen, Aminoresins, in Methods of Organic Chemistry K.H. Büchel (Ed.), pp 1811-1890, G. Thieme, Stuttgart, (1987).
9. A. Pizzi, L. Lipschitz and J. Valenzuela, Theory and practice of the preparation of low formaldehyde emission UF adhesives for particleboard. Holzforschung 48, 254-261 (1994).
10. M.G. Kim, L.W. Amos and E.E. Barnes, Study of the reaction rates and structures of a phenol-formaldehyde resol resin by carbon-13 NMR and gel permeation chromatography, Ind.Eng.Chem.Res. 29, 2032-2037 (1990).
11. C. Soulard, C. Kamoun and A. Pizzi, Uron and uron-urea-formaldehyde resins. J. Appl. Polym. Sci. 72, 277-289 (1999).
12. L.E. Smythe, The reaction of urea and formaldehyde in presence of sulphuric acid, J. Phys. Colloid Chem. 51, 369 (1947).
13. G.A. Growe and C.C. Lynch, Curing of urea-formaldehyde adhesives under acid conditions, J. Am. Chem. Soc. 70, 3795 (1948); 71, 3731 (1949); 75, 574 (1953).
14. L. Bettelheim and J. Cedwall, The slow condensation to polymers of methylol ureas, Svenska Kem. Tidskr. 60, 208-214 (1948).
15. C. Zhao, A. Pizzi and S. Garnier, Fast advancement and hardening acceleration of low condensation alkaline PF resins by esters and copolymerized urea. J. Appl. Polym. Sci. 74, 359-378 (1999).
16. M. Gordon, A. Halliwel and T. Wilson, Kinetics of the addition stage in the melamine-formaldehyde reaction, J. Appl. Polym. Sci. 10, 1153 (1966).
17. J.I. de Jong and J. de Jonge, Kinetics of the reaction between mono-methylolurea and methylene diurea, Recl. Trav. Chim. Pays-Bas 72, 207 (1953).
18. J.I. de Jong and J. de Jonge, The reaction of methylene diurea with formaldehyde, Recl. Trav. Chim. Pays-Bas 72, 213 (1953).
19. A. Pizzi, UF resins adhesion to wood-A quantification method for adhesive formulators. Holzforschung Holzverwertung 43, 63-67 (1991).
20. K. Erhardt and H. Petersen, Aminoplastisches bindemittel fuer holzwerstoffe, German Patent DE 2 207 921, assigned to BASF (1972).
21. D. Merkel and H. Petersen, Bindemittel fuer die holzverleimung, German Patent DE 2 550 739, assigned to BASF (1975).
22. M. Dunky, K. Lederer and E. Zimmer, Effect of molecular weight distribution of ureaformaldehyde resins on the technological properties of particle boards bonded with such resins, Holzforschung Holzverwertung 33, 61-71 (1981).
23. M. Dunky, Einfluss des Molverhaeltnisses auf die Eigenschaften der Leime und die erreichbaren Bindefestigkeiten bei Sperrholzverleimungen. Harnstoff-Formaldehyd-Leime, Holzforschung Holzverwertung 37, 75-82 (1985).
24. G.E. Myers, Resin hydrolysis and mechanisms of formaldehyde release from bonded wood products, in: Proceedings Wood Adhesives 2005: Status and Needs, Forest Products Society, Madison, WI, pp. 119-156 (1985).
25. H. Yamaguchi, M. Higuchi and I. Sakata, Hydrolytic dissolution behavior of a hardened urea-formardehyde resin, Mokuzai Gakkaishi 26, 199-204 (1980).
26. G.E. Myers, Hydrolytic stability of cured urea-formaldehyde resins, Wood Sci. 15, 127-138 (1982).
27. G.E. Myers and J.A. Koutsky, Procedure for measuring formaldehyde liberation from formaldehyde-based resins, Forest Prod. J. 37, 56-60 (1987).
28. C. Cremonini and A. Pizzi, Improved waterproofing of UF plywood adhesives by melamine salts as glue-mix hardeners. Holzforschung Holzverwertung 49, 11-15 (1997).
29. C. Cremonini and A. Pizzi, Field weathering of plywood panels bonded with UF adhesives and low proportion of melamine salts. Holz Roh Werkstoff 57, 318 (1999).
30. C. Kamoun and A. Pizzi, Performance effectiveness of addition to UF of melamine salts vs. melamine alone in MUF adhesives for plywood. Holz Roh Werkstoff 56, 86 (1998).
31. M. Prestifilippo, A. Pizzi, H. Norback and P. Lavisci, Low addition of melamine salts for improved UF adhesives water resistance. Holz Roh Werkstoff 54, 393-398 (1996).
32. G.E. Myers, Use of acid scavengers to improve durability of acid-catalyzed adhesive wood bonds, Forest Prod.J. 33, 49-57 (1983).
33. R. Koehler, über einige Versuche zur Härtung von Melaminformaldehyd-Kondensationsprodukten, Kolloid Z. 103, 138-144 (1943).
34. K. Frey, Kondensationsreaktionen von Anilin mit Formaldehyd und deren Bedeutung für die Herstellung plastischer Massen, Helv. Chim. Acta 18, 491-513 (1935).
35. D. Braun and H.J. Ritzert, Gemeinsame Kondensation von Harnstoff, Melamin und Formaldehyd. II. Modellreaktionen, Angew. Makromol. Chem. 156, 1-20 (1988).
36. D. Braun, M. de Lourdes Abrao and H.J.Ritzert, Gemeinsame kondensation von harnstoff, melamin und formaldehyd. I. Einfluß der reaktionsparameter, Angew. Makromol. Chem. 135, 193-210 (1985).
37. T.A. Mercer and A. Pizzi, Consideration on the principles of preparation of melamineurea-formaldehyde adhesive resins for particleboard. Holzforschung Holzverwertung. 46(3), 51-54 (1994).
38. C. Cremonini, A. Pizzi and P. Tekely, Improvement of PMUF adhesives performance for fireproof plywood. Holz Roh Werkstoff. 54(2), 85-88 (1996).
39. M. Higuchi, J.-K. Roh, S. Tajima, H. Irita, T.Honda and I.Sakata, Polymeric structures of melamine-based composite adhesives, in Proceedings of the Adhesives and Bonded Wood Symposium, Forest Products Society, Madison, pp. 429-449 (1994).
40. H. Czepel, Verfahren zur herstellung von formaldehyd-harnstoff-melamin kondensationsprodukte, German Patent DE 2 455 420, assigned to Lentia (1974).
41. H. Etling and H. Diem, Process for the preparation of melamine-urea-formaldehyde condensates, German Patent DE 3 442 454, assigned to BASF (1984).
42. J.J. Houtjer, Manufacture of particle board and a novel suitable bonding agent, European Patent EP 62 389, assigned to Methanol Chemie Nederland (1982).
43. H.O. McCaskey, Resin coated substrate using a short-set, high-flow melamineformaldehyde impregnating resin, US Patent 4,123,579, assigned to Westinghouse Electric Corp. (1978).
44. R.A. Breyer and S.G. Hollis, Low mole ratio melamine-urea-formaldehyde resin, US Patent 5,681,917, assigned to Georgia-Pacific Resins (1996).
45. F. Kauesbauer and W. Bolz, Process for the preparation of amino adhesive resins, German Patent DE 3 116 547, assigned to BASF (1981).
46. H. Diem and C. Dudeck, Method of preparing aminoplast resins, European Patent EP 52 212, assigned to BASF (1981).
47. M. Zanetti and A. Pizzi, Low addition of melamine salts for improved MUF adhesives water resistance. J. Appl. Polym. Sci. 88, 287-292 (2003).
48. A. Pizzi, M. Beaujean, C. Zhao, M. Properzi and Z. Huang, Acetals-induced strength increases and lower resin contents in MUF and other polycondensation adhesives J. Appl. Polym. Sci. 84, 2561-2571 (2002).
49. M. Zanetti, A. Pizzi, M. Beaujean, H. Pasch, K. Rode and P. Dalet, Acetals induced strength increase of MUF polycondensation adhesives, Part 2: Solubility and colloidal state disruption. J. Appl. Polym. Sci. 86, 1855-1862 (2002).
50. M. Zanetti and A. Pizzi, Variation of acetals on the performance of phenol-formaldehyde resin adhesives. J. Appl. Polym. Sci. 91, 2058-2060 (2004).
51. M. Zanetti, A. Pizzi and C. Kamoun, Upgrading of MUF particleboard adhesives and decrease of melamine content by buffer and additives. Holz Roh Werkstoff 61(1), 55-65 (2003).
52. C. Kamoun, A. Pizzi and M. Zanetti, Upgrading of MUF resins by buffering additives-Part 1: Hexamine sulphate effect and its limits. J. Appl. Polym. Sci. 90, 203-214 (2003).
53. M. Zanetti and A. Pizzi, Upgrading of MUF resins by buffering additives-Part 2: Hexamine sulphate mechanisms and alternate buffers. J. Appl. Polym. Sci. 90, 215-226 (2003).
54. A. Pizzi, 2001, High performance MUF resins of low melamine content by a number of novel techniques, in: Proceedings Wood Adhesives 2000, Forest Products Society, Madison,WI, pp 219-240 (2001).
55. J. Mayer and C. Schmidt-Hellerau, Wood adhesive, German Patent DE 2 020 481, assigned to BASF (1970).
56. H. Diem and H. Fritsch, Process for the preparation of cocondensates which form weatherproof adhesive bonds, German Patent DE 3 125 874, assigned to BASF (1981).
57. H. Diem and H. Fritsch, Process for the preparation of cocondensates which form a weatherproof adhesive bond, German Patent DE 3 145 328, assigned to BASF (1981).
58. M. Prestifilippo and A. Pizzi, Poor performance of PMUF adhesives prepared by final coreaction of a MUF with a PF resin. Holz. Roh. Werkstoff. 54, 272 (1996).
59. C. Cremonini, A. Pizzi and P. Tekely, Influence of PMUF resins preparation method on their molecular structure and performance as adhesives for plywood. Holz. Roh. Werkstoff. 54, 85-88 (1996).
60. D. Braun and W. Kraube, Gemeinsame Kondensation von Phenol, Melamin und Formaldehyd. I. Modellreaktionen, Angew. Makromol. Chem. 108, 141-159 (1982).
61. D. Braun and W. Kraube, Gemeinsame Kondensation von Phenol, Melamin und Formaldehyd, II. Chromatographische und spektroskopische Untersuchungen Angew. Makromol. Chem. 118, 165-182 (1983).
62. D. Braun, and H.J. Ritzert, Gemeinsame kondensation von phenol, melamin und formaldehyd. III. Vorkondensation, Angew. Makromol. Chem. 125, 9-26 (1984).
63. D. Braun, and H.J. Ritzert, Gemeinsame kondensation von phenol, melamin und formaldehyd. IV. Härtung, Angew. Makromol. Chem. 125, 27-36 (1984).
64. M. Higuchi and I. Sakata, Studies on the improvement of urea-formaldehyde resin adhesives (1). A possibility of water-resistance improvement, Mokuzai. Gakkaishi 25, 496-502 (1979).
65. M. Higuchi, H. Shimokawa and I. Sakata, Studies on the improvement of ureaformaldehyde resin adhesives (2). Effect of some urea derivatives and melamine as additives on water-resistance of a UF resin, Mokuzai. Gakkaishi 25, 630-635 (1979).
66. M. Higuchi, S. Tohmura and I. Sakata, Acceleration of the cure of phenolic resin adhesives V. Catalytic actions of carbonates and formamide, Mokuzai. Gakkaishi 40, 604-611 (1994).
67. A. Pizzi, J. Valenzuela and C. Westermeyer, Non-emulsifiables, water-based, diisocyanate adhesives for exterior plywood, Part 2: Industrial application. Holzforschung 47, 69-72 (1993).
68. C. Simon, B. George and A. Pizzi, UF/pMDI wood adhesives: Networks blend vs. copolymerization. J. Appl. Polym. Sci. 86, 3681-3688 (2002).
69. X. Zhou, H. Essawy, A. Pizzi, K. Li, K. Rode and G. Du, Upgrading of MUF wood adhesives for particleboard by highly-branched polymers. J. Adhesion Sci. Technol 27, 1058-1068 (2013).
70. N.J.L. Megson, Phenolic Resin Chemistry, Butterworth, London (1958).
71. A. Pizzi and A. Stephanou, On the chemistry, behaviour and cure acceleration of phenol-formaldehyde resins under very alkaline conditions. J. Appl. Polym. Sci. 49, 2157-2170 (1993).
72. K. Lenghaus, G.G. Qiao and D.H. Solomon, Model studies of the curing of resole phenol-formaldehyde resins Part 1. The behaviour of ortho quinone methide in a curing resin, Polymer 41, 1973-1978 (2000).
73. M. Duval, B. Bloch, and S. Kohn, Analysis of phenol-formaldehyde resols by gel permeation chromatography, J. Appl. Polym. Sci. 16, 1585-1602 (1972).
74. S. So and A. Rudin, Analysis of the formation and curing reactions of resole phenolics J. Appl. Polym. Sci. 41, 205-232 (1990).
75. E.R. Wagner and R.J. Greff, Analysis of resoles by gel permeation chromatography, J. Polym. Sci. A1, 9, 2193-2207 (1971).
76. K. Oldörp, Holzwerkstoffe: Neue entwicklungen, applikationen, in: Proceedings Klebstoffe für Holzwerkstoffe und Faserformteile J.Klein and R.Marutzky (Eds.), Braunschweig, Germany (1997).
77. K. Oldörp and H. Miertzsch, Untersuchungen zum Ersatz von Natriumhydroxid bei Phenolharzen durch Ammoniak, Holz. Roh. Werkstoff 55, 97-102 (1997).
78. St.E. Johnson and F.A. Kamke, Quantitative analysis of gross adhesive penetration in wood using fluorescence microscopy, J. Adhesion 40, 47-61 (1992).
79. St.E. Johnson and F.A. Kamke, Characteristics of phenol formaldehyde adhesive bonds in steam-injection pressed flakeboard, Wood Fiber Sci. 26, 259-269 (1994).
80. R.A.Haupt and T.Sellers. Jr., Characterizations of phenol-formaldehyde resol resins, Forest Prod. J. 44, 69-73 (1994).
81. S. Ellis, Natural adhesive-bonded particleboard, Forest Prod. J. 43, 66-68 (1993).
82. S. Ellis and P.R. Steiner, in: Proceedings Wood Adhesives 1990, Forest Products Society; Madison, Wisconsin, pp. 76-85 (1990).
83. S. Ellis and P.R. Steiner, The relationship between cure and flow parameters in powdered phenolic resins. Wood Fiber Sci. 23, 85-97 (1991).
84. W.L.-S. Nieh and T. Sellers, Jr., Performance of flakeboard bonded with three PF resins of different mole ratios and molecular weights, Forest Prod.J. 41(6), 49-53 (1991).
85. R.S. Stephens and N.P. Kutscha, Effect of resin molecular weight on bonding flakeboard, Wood Fiber Sci. 19, 353-361(1987).
86. L. Gollob, R.L. Krahmer, J.D. Wellons and A.W. Christiansen, Relationship between chemical characteristics of phenol-formaldehyde resins and adhesive performance, Forest Prod. J. 35(3), 42-48(1985).
87. R.H. Young, Wood adhesives 1985: Status and needs, in: Proceedings, Wood Adhesives: Status and Needs, Forest Products Society, Madison, WI, pp. 267-276 (1985).
88. R.A. Haupt and T. Sellers, Jr., Characterizations of phenol-formaldehyde resol resins, Ind. Eng. Chem. Res. 33, 693-697 (1994).
89. A. Pizzi and A. Stephanou, Phenol-formaldehyde wood adhesives under very alkaline conditions, Part 1: Behaviour and proposed mechanism. Holzforschung 48, 35-40 (1994).
90. X. Lu and A. Pizzi, Curing conditions effects on the characteristics of thermosetting adhesives-bonded wood joints-Part 1: Substrate influence on TTT and CHT curing diagrams of wood adhesives. Holz Roh Werkstoff 56, 339-346 (1998).
91. A. Pizzi, B. Mtsweni and W. Parsons, Wood-induced catalytic activation of PF adhesives autopolymerization vs. PF/wood covalent bonding. J. Appl. Polym. Sci. 52, 1847-1856 (1994).
92. A. Pizzi, R. Vosloo, F.A. Cameron and E.Orovan, Self-neutralizing acid-set PF wood adhesives. Holz. Roh. Werkstoff 44, 229-234 (1986).
93. A. Pizzi, R. Garcia and S. Wang, On the networking mechanisms of additives accelerated PF polycondensates. J. Appl. Polym. Sci. 66, 255-266 (1997).
94. A. Pizzi and A. Stephanou, Phenol-formaldehyde wood adhesives under very alkaline conditions, Part 2: Acceleartion mechanism and applied results. Holzforschung 48, 150-156 (1994).
95. B. Riedl and B.-D. Park, in: Proceedings Wood Adhesion Research, Forest Products Society, Madison, WI, pp.115-121 (1998).
96. P.R. Steiner, G.E. Troughton and A.W. Andersen, Aqueous phenolic dispersions for bonding higher moisture content veneers, Forest Prod. J. 43, 29-34 (1993).
97. S. Tohmura, Acceleration of the cure of phenolic resin adhesives VII: Influence of extractives of merbau wood on bonding, J. Wood Sci. 44, 211-216 (1998).
98. S. Tohmura and M. Higuchi, Acceleration of the cure of phenolic resin adhesives VI. Cure-accelerating action of propylene carbonate, Mokuzai. Gakkaishi. 41, 1109-1114 (1995).
99. C. Zhao, A. Pizzi, A. Kühn and S. Garnier, Fast advancement and hardening acceleration of low condensation alkaline PF resins by esters and copolymerized urea. Part 2: Esters during resin reaction and effect of guanidine salts. J. Appl. Polym. Sci. 77, 249-259 (2000).
100. P.R. Steiner, G.E. Troughton and A.W. Andersen, A new approach to phenolformaldehyde adhesives for wood panels, in: Proceedings Adhesives and Bonded Wood Products, Seattle, WA, pp. 205-214 (1991).
101. M.R. Clarke, P.R. Steiner and A.W. Anderson, Phenol formaldehyde adhesive for bonding wood pieces of high moisture content and composite board and veneers bonded with such adhesive, US Patent 4,824,896, assigned to Georgia-Pacific (1988).
102. T. Gramstad and J. Sandstroem, Thioamides and nitriles as proton acceptors in hydrogen bond formation and a discussion of solvent shifts in electronic spectra, Spectrochim. Acta 25A, 31 (1969).
103. E. Scopelitis and A. Pizzi, Urea-resorcinol-formaldehyde adhesives of low resorcinol content. J. Appl. Polym. Sci. 48, 2135-2146 (1993).
104. K. Oldörp and R. Marutzky, Untersuchungen an Spanplatten mit harnstoffmodifi-zierten PF-Harzen, Holz. Roh. Werkstoff 56, 75-77 (1998).
105. B. Tomita and C.-Y. Hse, Cocondensation of urea with methylolphenols in acidic conditions, J. Polym. Sci. Polym .Chem. 30, 1615-1624 (1992).
106. B. Tomita and C.-Y. Hse, Syntheses and structural analyses of cocondensed resins from urea and methylolphenols, Mokuzai Gakkaishi 39, 1276-1284 (1993).
107. B. Tomita, M. Ohyama and C.-Y. Hse, Synthesis of phenol-urea-formaldehyde cocondehsed resins from UF-concentrate and phenol, Holzforschung 48, 522-526 (1994).
108. B. Tomita, M. Ohyama, A. Itoh, K. Doi and C.-Y. Hse, Analysis of curing process and thermal properties of phenol-urea-formaldehyde cocondensed resins, Mokuzai. Gakkaishi. 40, 170-175 (1994).
109. B. Tomita, Y. Yoshida, and C.-Y. Hse, Kinetics on cocondensation between phenol and urea through formaldehyde, in: Proceedings, Adhesive Technology and Bonded Tropical Wood Products, Taipei, Taiwan, pp. 71-83 (1993).
110. M. Ohyama, B. Tomita and C.-Y. Hse, Curing property and plywood adhesive performance of resol-type phenol-urea-formaldehyde cocondensed resins, Holzforschung 49, 87-91 (1995).
111. A. Pizzi, A. Stephanou, I. Antunes and G. de Beer, Alkaline PF resins linear extension by urea condensation with hydroxybenzyl alcohol groups. J. Appl. Polym. Sci. 50, 2201-2207 (1993).
112. Y. Yoshida, B. Tomita and C.-Y. Hse, Kinetics of cocondensation between phenol and urea through formaldehyde III. Concurrent reactions of monomethylolphenol and urea involving cocondensation and self-condensation, Mokuzai Gakkaishi 41, 652-658 (1995).
113. B. Tomita and C.-Y. Hse, Phenol-urea-formaldehyde (PUF) co-condensed wood adhesives, Int. J. Adhesion. Adhesives 18, 69-79 (1998).
114. E. Kulvijk, Chestnut wood tannin extract in plywood adhesives, Adhesives Age, 20, 33-34, (March 1977).
115. A. Trosa and A. Pizzi, Stability and performance of tannin-accelerated PF resins for plywood. Holz. Roh. Werkstoff 55, 306-308 (1997).
116. C.M. Chen, Effects of extraction on the quantity of formaldehyde requirement in reaction of extractives of bark and agricultural residues with formaldehyde, Holzforschung. 36, 65-70 (1982).
117. B. Dix and R. Marutzky, Möglichkeiten der vermeilung von Holz mit kebstoffen auf der basis von naturlichen polyphenolen, Adhäsion 26(12), 4-10 (1982).
118. H.-J. Deppe and K. Ernst, Isocyanate als Spanplattenbindemittel, Holz. Roh. Werkstoff. 29, 45-50 (1971).
119. A. Pizzi and T. Walton, Non-emulsifiable, water-based diisocyanate adhesives for exterior plywood, Part 1: Novel reaction mechanisms and their chemical evidence, Holzforschung 46, 541-547 (1992).
120. A. Pizzi, J. Valenzuela and C. Westermeyer, Non-emulsifiable, water-based, diisocyanate adhesives for exterior plywood, Part 2: Industrial application. Holzforschung 47, 69-72 (1993).
121. D.B. Batubenga, A. Pizzi, A. Stephanou, P. Cheeseman and R. Krause, Isocyanate/phenolic wood adhesives by catalytic acceleration of copolymerisation. Holzforschung 49, 84-86 (1995).
122. C.-Y. Hse, R.L. Geimer, W.E. Hsu and R.C. Tang, Effect of resin type on properties of steam-press-cured flakeboards, Forest Prod. J. 45(1), 57-62 (1995).
123. KW. Haider, M.A. Wittig, J.A. Dettore, J.A. Dodge and J.W. Rosthauser, On the trail to isocyanate/phenolic hybrid wood binders: Model compound studies., in: Proceedings Wood Adhesives 2000, Forest Products Society, Madison, WI, pp 376-378 (2000).
124. H.J. Deppe, Technische Fortschritte bei der Isocyanatverleimung von Holzspanplatten, Holz. Roh. Werkstoff. 35, 295-297 (1977).
125. G.W. Ball and R.P. Redman, Isocyanates as adhesives for panels, in: Proceedings FESYP International Particleboard Symp., Hamburg, pp 121-126 (1978).
126. K.C. Frisch, L.P. Rumao and A. Pizzi, Diisocyanate wood adhesives in Wood Adhesives: Chemistry and Technology, Vol. 1, A.Pizzi (Ed.), Marcel Dekker, New York (1983).
127. 13C NMR investigation of the reaction in water of UF resins with blocked emulsified isocyanates. J. Appl. Polym. Sci. 99, 589-596 (2006).
128. 13C NMR investigation. J. Appl. Polym. Sci. 100, 1624-1632 (2006).
129. nd Edition, A. Pizzi and K.L. Mittal (Eds.), pp 681-694 Marcel Dekker, New York (2003).
130. F. Mora, F. Pla and A. Gandini, The interactions between wood components and formaldehyde-based resins. I. Monofunctional resin model compounds, Angew. Makromol. Chem. 173, 137-144 (1989).
131. G.C. Allan and A.N. Neogi, The mechanism of adhesion of phenol-formaldehyde resins to cellulosic and lignocellulosic substrates, J. Adhesion. 3, 13-18 (1971).
132. H. Poblete and E. Roffael, über chemische Veränderungen in Holzspänen bei der Herstellung von Harnstoff-Formaldehydharz-gebundenen Spanplatten, Holz. Roh. Werkstoff 43, 57-62 (1985).
133. G.E. Meyers, Adhesion of urea-formaldehyde resins to wood, in Procedings Wood Adhesives 1985: Status and and Needs, Forest Products Research Society, Madison, Wisconsin, pp. 47-62 (1986).
134. A. Pizzi and N. Owens, Interface covalent bonding vs. wood-induced catalytic autocondensation of diisocyanate wood adhesives. Holzforschung 49, 269-272 (1995).
135. J.J. Marcinko, W.H. Newman, C. Phanopoulos and M.A. Sander, The nature of the MDI/wood bond, in: Proc. 2nd Washington State University International Symposium on Particleboard, Pullman, p. 175 (1995).
136. J. Ni and C.E. Frazier, On the occurrence of network interpenetration in the woodisocyanate adhesive interphase, Int. J. Adhesion Adhesives 18, 81-87 (1998).
137. C. Zhao, A. Pizzi and S. Garnier, Fast advancement and hardening acceleration of low condensation alkaline PF resins by esters and copolymerized urea. J. Appl. Polym. Sci. 74, 359-378 (1999).
138. F. Pichelin, A. Pizzi and A. Frühwald, OSB adhesives rate of strength development on single strands couples. Holz. Roh. Werkstoff 58, 182-183 (2000).
139. A. Despres, Mise au point de nouvelles résines aminoplastes écologiques à base de diméthoxyéthanal et sans formaldehyde pour application en tant que colles pour panneaux de particules, Ph.D. thesis, University of Nancy 1, France (2005).
140. F. Johnson, A.M. Wooler, O. Bengston and P. Mayrhofer, Emulsions of isocyanates and their manufacture, US Patent 3,996,154, assigned to ICI (1976).
141. A. Pizzi, E.P. von Leyser, J. Valenzuela and J.G. Clark, The chemistry and development of pine tannin adhesives for exterior particleboard. Holzforschung 47, 168-172 (1993).
142. A. Pizzi, A universal formulation for tannin adhesives for particleboard. J. Macromol. Sci. Chem.Ed. A16, 1243-1248 (1981).
143. A. Pizzi, Pine tannin adhesives for particleboard. Holz. Roh. Werkstoff. 40, 293-300 (1982).
144. A. Pizzi and A. Stephanou, Rapid curing lignins-based exterior wood adhesives, Part 1: diisocyanates reaction mechanisms and application to panel products. Holzforschung 47, 439-445 (1993).
145. A. Pizzi and A. Stephanou, Rapid curing lignins-based exterior wood adhesives, Part 2: Acceleration mechanisms and application to panel products. Holzforschung 47, 501-506 (1993).
146. Z. Osman, A. Pizzi, W. Kantner and M.C. Triboulot, PUF panel adhesives mixed with additional urea and reinforced by isocyanates. Holz. Roh. Werkstoff. 63, 53-56 (2005).
147. H. Lei, A. Pizzi and G. Du, Coreacting PMUF/Isocyanate resins for wood panel adhesives. Holz. Roh. Werkstoff. 64, 117-120 (2006).
148. th European Panel Products Symposium, Llandudno, Wales, UK, pp 40-47 (2005).
149. H.R. Mansouri and A. Pizzi, Recycled polyurethane micronized powders as active extenders of UF and PF wood panel adhesives. Holz. Roh. Werkst. 65, 293-299 (2007).
150. th European Panel Products Symposium, Llandudno, Wales, UK, pp 2-52 to 2-56 (2004).