Evaluation of the mechanical behavior of epoxy composite reinforced with Kevlar plain fabric and glass/Kevlar hybrid fabric

Composites Part B: Engineering

Volumn 70, Issue , 2015, Pages 1-8

  Valenҫa, Silvio Leonardo ^a   Griza, Sandro ^a   De Oliveira, Vandalucia Gomes ^a   Sussuchi, Eliana Midori ^a   De Cunha, Frederico Guilherme Carvalho ^a  

^a FEDERAL UNIVERSITY OF SERGIPE   (Brazil)

Author keywords

A. Fabrics textiles; A. Hybrid; A. Polymer matrix composites; B. Mechanical properties

Indexed keywords

BENDING TESTS; MECHANICAL PROPERTIES; POLYMER MATRIX COMPOSITES; REINFORCEMENT; SCANNING ELECTRON MICROSCOPY;

A. HYBRID; COMPOSITE PLATES; EPOXY COMPOSITE; EPOXY MATRICES; FABRICS/TEXTILES; HYBRID STRUCTURE; MECHANICAL BEHAVIOR; PROPERTIES OF COMPOSITES;

ARAMID FIBERS;

EID: 84910022473     PISSN: 13598368     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesb.2014.09.040     Document Type: Article

References (36)

1. Carvalho V, Belsley M, Vasconcelos RM, Soares FO. Yarn periodical errors determination using three signal processing approaches. Digital Signal Process 2013;23:1427-40.
2. Gellert EP, Turley DM. Seawater immersion ageing of glass-fibre reinforced polymer laminates for marine applications. Composites Part A 1999;30:1259-65.
3. Hufenbach W, Böhm R, Kroll L, Langkamp A. Theoretical and experimental investigation of anisotropic damage in textile reinforced composite structures. Mech Compos 2004;40(6):519-32.
4. Kisner A, Rainert KT, Ferrari F, Nau CT, Barcellos IO, Pezzin SH, et al. Chemical functionalization of polyamide 6.6 fabrics. React Funct Polym 2013;73:1349-56.
5. Sarasini F, Tirillò J, Ferrante L, Valente M, Valente T, Lampani L, et al. Drop-weight impact behaviour of woven hybrid basalt-carbon/epoxy composites. Composites: Part B 2014;59:204-20.
6. Isa MT, Ahmed AS, Aderemi BO, Taib RM, Mohammed-Dabo IA. Effect of fiber type and combinations on the mechanical, physical and thermal stability properties of polyester hybrid composites. Composites: Part B 2013;52:217-23.
7. de Vasconcellos DS, Sarasini F, Touchard F, Chocinski-Arnault L, Pucci M, Santulli C, et al. Influence of low velocity impact on fatigue behaviour of woven hemp fibre reinforced epoxy composites. Composites: Part B 2014;66:46-57.
8. Li Ting-Ting, Wang Rui, Lou Ching-Wen, Lin Jia-Horng. Static and dynamic puncture behaviors of compound fabrics with recycled high-performance Kevlar fibers. Composites: Part B 2014;59:60-6.
9. Joshi H, Purnima J. Development of glass fiber, wollastonite reinforced polypropylene hybrid composite: mechanical properties and morphology. Mater Sci Eng, A 2010;527:1946-51.
10. Chen Qi, Zhao Y, Zhou Z, Rahman A, Wub Xiang-Fa, Wuc W, et al. Fabrication and mechanical properties of hybrid multi-scale epoxy composites reinforced with conventional carbon fiber fabrics surface-attached with electrospun carbon nanofiber mats. Composites Part B 2013;44:1-7.
11. Gu Y, Tan X, Yang Z, li Min, Zhang Z. Hot compaction and mechanical properties of ramie fabric/epoxy composite fabricated using vacuum assisted resin infusion molding. Mater Des 2014;56:852-61.
12. Paiva Júnior CZ, de Carvalho LH, Fonseca VM, Monteiro SN. Analysis of the tensile strength of polyester/hybrid ramie-cotton fabric composites. Polym Test 2004;23:131-5.
13. Moezzi M, Ghane M, Nicoletto G, Nedoushan RJ. Analysis of the mechanical response of a woven polymeric fabric with locally induced damage. Mater Des 2014;54:279-90.
14. Guermazi N, Haddar N, Elleuch K, Ayedi HF. Investigations on the fabrication and the characterization of glass/epoxy, carbon/epoxy and hybrid composites used in the reinforcement and the repair of aeronautic structures. Mater Des 2014;56:714-24.
15. Griza Sandro, Ueki Marcelo M, Souza Dárcio HG, Cervieri André, Strohaecker Telmo R. Thermally induced strains and total shrinkage of the polymethylmethacrylate cement in simplified models of total hip arthroplasty. J Mech Behav Biomed Mater 2013;18:29-36.
16. Mousa G, Anita HS. Study of the cure reaction of DGEBA/ABS blend in the presence of aromatic diamine. Iran Polym J 2008;17(6):395-405.
17. Block C, Van Mele B, Van Puyvelde P, Van Assche G. Time-temperature-transformation (TTT) and temperature-conversion-transformation (TxT) cure diagrams by RheoDSC: combined rheometry and calorimetry on an epoxyamine thermoset. React Funct Polym 2013;73:332-9.
18. Li Cheng, Zuo Chunmiao, Fan Hong, Yu Mingxin, Li Bogeng. Novel silicone aliphatic amine curing agent for epoxy res, 1,3-Bis(2-aminoethylaminomethyl) tetramethyldisiloxane. 1. Non-isothermal cure and thermal decomposition property. Thermochim Acta 2012;545:75-81.
19. Li Cheng, Fan Hong, Hu Jijiang, Li Bogeng. Novel silicone aliphatic amine curing agent for epoxy resin: 1,3-Bis(2-aminoethylaminomethyl) tetramethyldisiloxane. 2. Isothermal cure, and dynamic mechanical property. Thermochim Acta 2012;549:132-9.
20. Hardis R, Jessop Julie LP, Peters Frank E, Kessler Michael R. Cure kinetics characterization and monitoring of an epoxy resin using DSC, Raman spectroscopy, and DEA. Composites: Part A 2013;49:100-8.
21. Wan YZ, Lian JJ, Huanga Y, Wang YL, Chen GC. Two-step surface treatment of 3D braided carbon/Kevlar hybrid fabric and influence on mechanical performance of its composites. Mater Sci Eng, A 2006;429:304-11.
22. Ko FK. Preform fiber architecture for ceramic-matrix composites. Ceram Bull 1989;68(2):401.
23. Banerjee S, Sankar BV. Mechanical properties of hybrid composites using finite element method based micromechanics. Composites: Part B 2014;58:318-27.
24. Taraghi I, Fereidoon A, Taheri-Behrooz F. Low-velocity impact response of woven Kevlar/epoxy laminated composites reinforced with multi-walled carbon nanotubes at ambient and low temperatures. Mater Des 2014;53:152-8.
25. Segovia F et al. Cure effects on post-impact tensile characteristics of 2D epoxy composites. J Mater Process Technol 2003;143-144:209-13.
26. Wooa Sung-Choong, Kim Tae-Won. High-strain-rate impact in Kevlar-woven composites and fracture analysis using acoustic emission. Composites: Part B 2014;60:125-36.
27. Zeng X, Brown LP, Endruweit A, Matveev M, Long AC. Geometrical modelling of 3D woven reinforcements for polymer composites: prediction of fabric permeability and composite mechanical properties. Composites: Part A 2014;56:150-60.
28. Cherif C, Krzywinski S, Lin H, Schulz C, Haasemann G. New process chain for realisation of complex 2D/3D weft knitted fabrics for thermoplastic composite applications. Proc Mater Sci 2013;2:111-29.
29. Zhou Yi, Chen X, Wells G. Influence of yarn gripping on the ballistic performance of woven fabrics from ultra-high molecular weight polyethylene fibre. Composites: Part B 2014;62:198-204.
30. Huang T, Li T, Xin Y, Liu P, Su C. Mechanical and tribological properties sof hybrid fabric-modified polyetherimide composites. Wear 2013;306:64-72.
31. Zhang J, Chaisombat K, He Shuai, Wang CH. Hybrid composite laminates reinforced with glass/carbon woven fabrics for lightweight load bearing structures. Mater Des 2012;36:75-80.
32. Sarasini F, Tirillò J, Valente M, Ferrante L, Cioffi S, Iannace S, et al. Hybrid composites based on aramid and basalt woven fabrics: impact damage modes and residual flexural properties. Mater Des 2013;49:290-302.
33. Chensong Dong, Davies Ian J. Optimal design for theflexural behaviour of glass end carbon fiber reinforced polymer hybrid composites. Mater Des 2012;37:450-7.
34. Wisnom MR, Khan B, Hallett SR. Size effects in unnotched tensile strength of unidirectional and quasi-isotropic carbon/epoxy laminates. Compos Struct 2008;84:21-8.
35. Soutis C, Curtis PT. A method for predicting the fracture toughness of CFRP laminates failing by fibre microbuckling. Composites Part A: Appl Sci Manuf 2000;31:733-40.
36. Bienias̈ J, Ostapiuk M, Surowska B. Fractography and damage analysis of carbon/epoxy composites under static and dynamic loads at elevated temperatures. Acta Mech et Autom 2012;6(1).