Fibre hybridisation in polymer composites: A review

Composites Part A: Applied Science and Manufacturing

Volumn 67, Issue , 2014, Pages 181-200

  Swolfs, Yentl ^a   Gorbatikh, Larissa ^a   Verpoest, Ignaas ^a  

^a UNIVERSITY OF LEUVEN   (Belgium)

Author keywords

A. Carbon fibre; A. Hybrid; A. Polymer matrix composites (PMCs); B. Mechanical properties

Indexed keywords

CARBON FIBERS; COMPETITION; FIBER REINFORCED PLASTICS; MECHANICAL PROPERTIES;

A. HYBRID; FIBRE REINFORCED COMPOSITES; HYBRID COMPOSITES; IMPACT AND FATIGUE PROPERTIES; POLYMER COMPOSITE; POLYMER MATRIX COMPOSITES (PMCS); STRUCTURAL APPLICATIONS; SYNERGISTIC EFFECT;

POLYMER MATRIX COMPOSITES;

EID: 84907860123     PISSN: 1359835X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesa.2014.08.027     Document Type: Review

References (163)

1. Q. Hui, E.S. Greenhalgh, M.S.P. Shaffer, and A. Bismarck Carbon nanotube-based hierarchical composites: a review J Mater Chem 20 23 2010 4751 4762
2. N. De Greef, L. Gorbatikh, A. Godara, L. Mezzo, S.V. Lomov, and I. Verpoest The effect of carbon nanotubes on the damage development in carbon fiber/epoxy composites Carbon 49 14 2011 4650 4664
3. N. De Greef, L. Gorbatikh, S.V. Lomov, and I. Verpoest Damage development in woven carbon fiber/epoxy composites modified with carbon nanotubes under tension in the bias direction Compos Part a - Appl Sci Manufact 42 11 2011 1635 1644
4. P. Fratzl, and R. Weinkamer Nature's hierarchical materials Prog Mater Sci 52 8 2007 1263 1334
5. L. Gorbatikh, S.V. Lomov, and I. Verpoest Original mechanism of failure initiation revealed through modelling of naturally occurring microstructures J Mech Phys Solids 58 5 2010 735 750
6. A.R. Studart Towards high-performance bioinspired composites Adv Mater 24 37 2012 5024 5044
7. A. Shindo On the carbonization of polyacrylonitrile fiber Carbon 1 3 1964 391 392
8. M.M. Tang, and R. Bacon Carbonization of cellulose fibers - 1. Low temperature pyrolysis Carbon 2 3 1964 211 220
9. E. Fitzer PAN-based carbon fibers - present state and trend of the technology from the viewpoint of possibilities and limits to influence and to control the fiber properties by the process parameters Carbon 27 5 1989 621 645
10. G. Kretsis A review of the tensile, compressive, flexural and shear properties of hybrid fibre-reinforced plastics Composites 18 1 1987 13 23
11. E. Sevkat, B. Liaw, F. Delale, and B.B. Raju Effect of repeated impacts on the response of plain-woven hybrid composites Compos Part B - Eng. 41 5 2010 403 413
12. Z.S. Wu, C.Q. Yang, Y.H. Tobe, L.P. Ye, and T. Harada Electrical and mechanical characterization of hybrid CFRP sheets J Compos Mater 40 3 2006 227 244
13. G. Czél, and M.R. Wisnom Demonstration of pseudo-ductility in high performance glass/epoxy composites by hybridisation with thin-ply carbon prepreg Compos A Appl Sci Manuf 52 2013 23 30
14. P.W. Manders, and M.G. Bader The strength of hybrid glass/carbon fibre composites. Part 1. Failure strain enhancement and failure mode J Mater Sci 16 8 1981 2233 2245
15. Hayashi T. On the improvement of mechanical properties of composites by hybrid composition. In: Proc 8th int reinforced plastics conference; 1972. p. 149-52.
16. G. Marom, S. Fischer, F.R. Tuler, and H.D. Wagner Hybrid effects in composites: conditions for positive or negative effects versus rule-of-mixtures behavior J Mater Sci 13 7 1978 1419 1426
17. J. Summerscales, and D. Short Carbon fiber and glass fibre hybrid reinforced plastics Composites 9 3 1978 157 166
18. M.G. Phillips Composition parameters for hybrid composite materials Composites 12 2 1981 113 116
19. M.G. Phillips On composition parameters for hybrid composite materials Composites 13 1 1982 18 20
20. L.N. Phillips The hybrid effect - does it exist? Composites 7 1 1976 7 8
21. B. Harris, and A.R. Bunsell Impact properties of glass fibre/carbon fibre hybrid composites Composites 6 5 1975 197 201
22. Y.P. Qiu, and P. Schwartz Micromechanical behavior of Kevlar-149/S-glass hybrid 7-fiber microcomposites: II. Stochastic modeling of stress-rupture of hybrid composites Compos Sci Technol 47 3 1993 303 315
23. J. Aveston, and J.M. Sillwood Synergistic fiber strengthening in hybrid composites J Mater Sci 11 10 1976 1877 1883
24. C. Zweben Tensile strength of hybrid composites J Mater Sci 12 7 1977 1325 1337
25. H. Fukuda, and T.W. Chou Stress concentrations in a hybrid composite sheet J Appl Mech - Trans Asme 50 4A 1983 845 848
26. D.G. Harlow Statistical properties of hybrid composites. I. Recursion analysis Proc R Soc London Ser a - Math Phys Eng Sci 389 1796 1983 67 100
27. Q.D. Zeng, F.Q. Fan, and Y.Y. Zhang A random critical-core theory of microdamage in interply hybrid composites 1. First failure strain and hybrid effect Compos Sci Technol 49 4 1993 341 348
28. R. Kulkarni, and O. Ochoa Transverse and longitudinal CTE measurements of carbon fibers and their impact on interfacial residual stresses in composites J Compos Mater 40 8 2006 733 754
29. C.S. Dong Development of a model for predicting the transverse coefficients of thermal expansion of unidirectional carbon fibre reinforced composites Appl Compos Mater 15 3 2008 171 182
30. D.L. Motoc, J. Ivens, and N. Dadirlat Coefficient of thermal expansion evolution for cryogenic preconditioned hybrid carbon fiber/glass fiber-reinforced polymeric composite materials J Therm Anal Calorim 112 3 2013 1245 1251
31. A.R. Bunsell, and B. Harris Hybrid carbon and glass fibre composites Composites 5 4 1974 157 164
32. P.W. Manders, and M.G. Bader The strength of hybrid glass/carbon fibre composites. Part 2. A statistical model J Mater Sci 16 8 1981 2246 2256
33. B.W. Rosen Tensile failure of fibrous composites AIAA J 2 11 1964 1985 1991
34. J.M. Hedgepeth, and P. Van Dyke Local stress concentrations in imperfect filamentary composite materials J Compos Mater 1 3 1967 294 309
35. C.M. Landis, and R.M. McMeeking Stress concentrations in composites with interface sliding, matrix stiffness and uneven fiber spacing using shear lag theory Int J Solids Struct 36 28 1999 4333 4361
36. M.R. Nedele, and M.R. Wisnom Stress-concentration factors around a broken fiber in a unidirectional carbon-fiber-reinforced epoxy Composites 25 7 1994 549 557
37. Y. Swolfs, L. Gorbatikh, V. Romanov, S. Orlova, S.V. Lomov, and I. Verpoest Stress concentrations in an impregnated fibre bundle with random fibre packing Compos Sci Technol 74 2013 113 120
38. A.E. Scott, M. Mavrogordato, P. Wright, I. Sinclair, and S.M. Spearing In situ fibre fracture measurement in carbon-epoxy laminates using high resolution computed tomography Compos Sci Technol 71 2011 1471 1477
39. S. Pimenta, and S.T. Pinho Hierarchical scaling law for the strength of composite fibre bundles J Mech Phys Solids 61 6 2013 1337 1356
40. Y. Swolfs, L. Gorbatikh, and I. Verpoest Stress concentrations in hybrid unidirectional fibre-reinforced composites with random fibre packings Compos Sci Technol 85 2013 10 16
41. L.N. Phillips On the usefulness of glass-fibre-carbon hybrids 1976 British Plastics Federation Congress Brighton (United Kingdom)
42. W.A. Curtin Dimensionality and size effects on the strength of fiber-reinforced composites Compos Sci Technol 60 4 2000 543 551
43. M.R. Wisnom, B. Khan, and S.R. Hallett Size effects in unnotched tensile strength of unidirectional and quasi-isotropic carbon/epoxy composites Compos Struct 84 1 2008 21 28
44. J.M. Hedgepeth Stress concentrations in filamentary structures NASA TN 1961 1 36 D-882()
45. X. Ji, X.R. Liu, and T.W. Chou Dynamic stress concentration factors in unidirectional composites J Compos Mater 19 3 1985 269 275
46. Y. Xia, and C. Ruiz Analysis of damage in stress wave loaded unidirectional composites Comput Struct 38 3 1991 251 258
47. J. Xing, G.C. Hsiao, and T.W. Chou A dynamic explanation of the hybrid effect J Compos Mater 15 SEP 1981 443 461
48. D.G. Harlow, and S.L. Phoenix The chain-of-bundles probability model for the strength of fibrous materials I: analysis and conjectures J Compos Mater 12 APR 1978 195 214
49. H. Fukuda An advanced theory of the strength of hybrid composites J Mater Sci 19 3 1984 974 982
50. S.J. Fariborz, C.L. Yang, and D.G. Harlow The tensile behavior of intraply hybrid composites I: model and simulation J Compos Mater 19 4 1985 334 354
51. V.V. Kobelev Explicit crack problem solutions of hybrid composites Int J Solids Struct 30 3 1993 413 426
52. H. Fukunaga, T.W. Chou, and H. Fukuda Probabilistic strength analyses of interlaminated hybrid composites Compos Sci Technol 35 4 1989 331 345
53. C. Zweben An approximate method of analysis for notched unidirectional composites Eng Fract Mech 6 1 1974 1 10
54. X.F. Zhou, and H.D. Wagner Stress concentrations caused by fiber failure in two-dimensional composites Compos Sci Technol 59 7 1999 1063 1071
55. Q.D. Zeng A statistical analysis of the tensile failure and hybrid effect of an intraply hybrid composite Int J Fract 68 4 1994 351 362
56. H. Fukunaga, C. Tsu-Wei, and H. Fukuda Strength of intermingled hybrid composites J Reinf Plast Compos 3 2 1984 145 160
57. H. Fukuda, and T.W. Chou Monte Carlo simulation of the strength of hybrid composites J Compos Mater 16 SEP 1982 371 385
58. N. Pan, and R. Postle The tensile strength of hybrid fibre composites: a probabilistic analysis of the hybrid effects Phil Trans R Soc London Ser a - Math Phys Eng Sci 354 1714 1996 1875 1897
59. S.J. Fariborz, and D.G. Harlow The tensile behavior of intraply hybrid composites. II: micromechanical model J Compos Mater 21 9 1987 856 875
60. D.G. Harlow Statistical properties of hybrid composites: asymptotic distributions for strain Rel Eng Syst Safe 56 3 1997 197 208
61. Manders PW. The strength of mixed fibre composites. PhD. thesis. University of Surrey, UK; 1979.
62. K.D. Jones, and A.T. Dibenedetto Fiber fracture in hybrid composite systems Compos Sci Technol 51 1 1994 53 62
63. L. Mishnaevsky Jr, and G. Dai Hybrid carbon/glass fiber composites: micromechanical analysis of structure-damage resistance relationships Comput Mater Sci 81 2014 630 640
64. P.G. Ren, Z.P. Zhang, L. Xie, F. Ren, Y.L. Jin, and Y.Y. Di Hybrid effect on mechanical properties of M40-T300 carbon fiber reinforced Bisphenol A Dicyanate ester composites Polym Compos 31 12 2010 2129 2137
65. A. Peijs, and J.M.M. Dekok Hybrid composites based on polyethylene and carbon fibres. Part 6: tensile and fatigue behavior Composites 24 1 1993 19 32
66. C.E. Bakis, A. Nanni, J.A. Terosky, and S.W. Koehler Self-monitoring, pseudo-ductile, hybrid FRP reinforcement rods for concrete applications Compos Sci Technol 61 6 2001 815 823
67. Y. Liang, C. Sun, and F. Ansari Acoustic emission characterization of damage in hybrid fiber-reinforced polymer rods J Compos Constr 8 1 2004 70 78
68. M.J. Pitkethly, and M.G. Bader Failure modes of hybrid composites consisting of carbon fibre bundles dispersed in a glass fibre epoxy resin matrix J Phys D-Appl Phys 20 3 1987 315 322
69. M. Jawaid, and H. Khalil Cellulosic/synthetic fibre reinforced polymer hybrid composites: a review Carbohydr Polym 86 1 2011 1 18
70. Y. Zhang, Y. Li, H. Ma, and T. Yu Tensile and interfacial properties of unidirectional flax/glass fiber reinforced hybrid composites Compos Sci Technol 88 2013 172 177
71. Taketa I. Analysis of failure mechanisms and hybrid effects in carbon fibre reinforced thermoplastic composites. PhD thesis. KU Leuven, Leuven; 2011.
72. J.L. Perry, and D.F. Adams Charpy impact experiments on graphite/epoxy hybrid composites Composites 6 4 1975 166 172
73. A. Peijs, P. Catsman, L.E. Govaert, and P.J. Lemstra Hybrid composites based on polyethylene and carbon fibres. Part 2: influence of composition and adhesion level of polyethylene fibers on mechanical properties Composites 21 6 1990 513 521
74. I. Taketa, J. Ustarroz, L. Gorbatikh, S.V. Lomov, and I. Verpoest Interply hybrid composites with carbon fiber reinforced polypropylene and self-reinforced polypropylene Compos A Appl Sci Manuf 41 8 2010 927 932
75. Diao H, Bismarck A, Robinson P, Wisnom MR. Pseudo-ductile behaviour of unidirectional fibre reinforced polyamide 12 composite by intra-tow hybridization. In: Proceedings of the 15th European conference on composite materials, Venice; 2012.
76. C.C. Chamis, R.F. Lark, and J.H. Sinclair Mechanical property characterisation of intraply hybrid composites C.C. Chamis, Test methods and design allowables for fibrous composites 1981 ASTM 261 280
77. Y.J. You, Y.H. Park, H.Y. Kim, and J.S. Park Hybrid effect on tensile properties of FRP rods with various material compositions Compos Struct 80 1 2007 117 122
78. K.S. Pandya, C. Veerraju, and N.K. Naik Hybrid composites made of carbon and glass woven fabrics under quasi-static loading Mater Des 32 7 2011 4094 4099
79. J. Zhang, K. Chaisombat, S. He, and C.H. Wang Hybrid composite laminates reinforced with glass/carbon woven fabrics for lightweight load bearing structures Mater Des 36 2012 75 80
80. A.G. Dumanli, and A.H. Windle Carbon fibres from cellulosic precursors: a review J Mater Sci 47 10 2012 4236 4250
81. T.W. Chou, and A. Kelly Mechanical properties of composites Annu Rev Mater Sci 10 1980 229 259
82. J. Aveston, and A. Kelly Tensile first cracking strain and strength of hybrid composites and laminates Phil Trans R Soc London Ser a - Math Phys Eng Sci 294 1411 1980 519 534
83. Y. Shan, and K. Liao Environmental fatigue behavior and life prediction of unidirectional glass-carbon/epoxy hybrid composites Int J Fatigue 24 8 2002 847 859
84. C. Wonderly, J. Grenestedt, G. Fernlund, and E. Cěpus Comparison of mechanical properties of glass fiber/vinyl ester and carbon fiber/vinyl ester composites Compos B Eng 36 5 2005 417 426
85. F. Tanaka, T. Okabe, H. Okuda, I.A. Kinloch, and R.J. Young The effect of nanostructure upon the compressive strength of carbon fibres J Mater Sci 48 5 2013 2104 2110
86. Choi SR. Free-roller versus fixed-roller fixtures in flexure testing of advanced ceramic materials. In: Proceedings of the 20th annual conference on composites, advanced ceramics, materials, and structures - A: ceramic engineering and science proceedings. John Wiley & Sons, Inc.; 2008. p. 69-77.
87. B.D. Davidson, and X. Sun Effects of friction, geometry, and fixture compliance on the perceived toughness from three-and four-point bend end-notched flexure tests J Reinf Plast Compos 24 15 2005 1611 1628
88. M.R. Wisnom, J.W. Atkinson, and M.I. Jones Reduction in compressive strain to failure with increasing specimen size in pin-ended buckling tests Compos Sci Technol 57 9-10 1997 1303 1308
89. M.R. Wisnom The effect of specimen size on the bending strength of unidirectional carbon fibre-epoxy Compos Struct 18 1 1991 47 63
90. C.S. Dong, J. Duong, and I.J. Davies Flexural properties of S-2 glass and TR30S carbon fiber-reinforced epoxy hybrid composites Polym Compos 33 5 2012 773 781
91. J.W. Giancaspro, C.G. Papakonstantinou, and P.N. Balaguru Flexural response of inorganic hybrid composites with E-glass and carbon fibers J Eng Mater Technol 2010 8 021005
92. I.J. Davies, and H. Hamada Flexural properties of a hybrid polymer matrix composite containing carbon and silicon carbide fibres Adv Compos Mater 10 1 2001 77 96
93. C. Dong, and I.J. Davies Optimal design for the flexural behaviour of glass and carbon fibre reinforced polymer hybrid composites Mater Des 37 2012 450 457
94. R. Petrucci, C. Santulli, D. Puglia, F. Sarasini, L. Torre, and J.M. Kenny Mechanical characterisation of hybrid composite laminates based on basalt fibres in combination with flax, hemp and glass fibres manufactured by vacuum infusion Mater Des 2013
95. M. Boopalan, M. Niranjanaa, and M.J. Umapathy Study on the mechanical properties and thermal properties of jute and banana fiber reinforced epoxy hybrid composites Compos B Eng 51 2013 54 57
96. P.N. Khanam, G.R. Reddy, K. Raghu, and S.V. Naidu Tensile, flexural, and compressive properties of coir/silk fiber-reinforced hybrid composites J Reinf Plast Compos 29 14 2010 2124 2127
97. A. Haneefa, P. Bindu, I. Aravind, and S. Thomas Studies on tensile and flexural properties of short banana/glass hybrid fiber reinforced polystyrene composites J Compos Mater 42 15 2008 1471 1489
98. M. Sayer, N.B. Bektasc, and O. Sayman An experimental investigation on the impact behavior of hybrid composite plates Compos Struct 2010 1256 1262
99. R. Park, and J.S. Jang Impact behavior of aramid fiber glass fiber hybrid composite: evaluation of four-layer hybrid composites J Mater Sci 36 9 2001 2359 2367
100. B.Z. Jang, L.C. Chen, C.Z. Wang, H.T. Lin, and R.H. Zee Impact resistance and energy-absorption mechanisms in hybrid composites Compos Sci Technol 34 4 1989 305 335
101. A. Enfedaque, J.M. Molina-Aldareguia, F. Galvez, C. Gonzalez, and J. Llorca Effect of glass fiber hybridization on the behavior under impact of woven carbon fiber/epoxy laminates J Compos Mater 44 25 2010 3051 3068
102. E. Sevkat, B. Liaw, F. Delale, and B.B. Raju Drop-weight impact of plain-woven hybrid glass-graphite/toughened epoxy composites Compos A Appl Sci Manuf 40 8 2009 1090 1110
103. L. Onal, and S. Adanur Effect of stacking sequence on the mechanical properties of glass-carbon hybrid composites before and after impact J Ind Text 31 4 2002 255 271
104. De Cuyper P. Interlayer hybridisation of steel fibre and self-reinforced composites. Master thesis. KU Leuven, Leuven; 2012.
105. N.K. Naik, R. Ramasimha, H. Arya, S.V. Prabhu, and N. ShamaRao Impact response and damage tolerance characteristics of glass-carbon/epoxy hybrid composite plates Compos B Eng 32 7 2001 565 574
106. M.V. Kowsika, and P.R. Mantena Static and low-velocity impact response characteristics of pultruded hybrid glass-graphite/epoxy composite beams J Thermoplast Compos Mater 12 2 1999 121 132
107. C. Pavithran, P.S. Mukherjee, M. Brahmakumar, and A.D. Damodaran Impact properties of sisal-glass hybrid laminates J Mater Sci 26 2 1991 455 459
108. I.M. De Rosa, F. Marra, G. Pulci, C. Santulli, F. Sarasini, and J. Tirillo Post-impact mechanical characterisation of E-glass/basalt woven fabric interply hybrid laminates Exp Polym Lett 5 5 2011 449 459
109. F. Sarasini, J. Tirillò, M. Valente, T. Valente, S. Cioffi, and S. Iannace Effect of basalt fibre hybridization on the impact behaviour under low impact velocity of glass/basalt woven fabric/epoxy resin composites Compos A Appl Sci Manuf 47 2013 109 123
110. F. Sarasini, J. Tirillò, M. Valente, L. Ferrante, S. Cioffi, and S. Iannace Hybrid composites based on aramid and basalt woven fabrics: impact damage modes and residual flexural properties Mater Des 49 2013 290 302
111. R. Park, and J. Jang Effect of laminate geometry on impact performance of aramid fiber/polyethylene fiber hybrid composites J Appl Polym Sci 75 7 2000 952 959
112. A. Peijs, and R.W. Venderbosch Hybrid composites based on polyethylene and carbon fibres. Part 4: influence of hybrid design on impact strength J Mater Sci Lett 10 19 1991 1122 1124
113. H.M. El-Dessouky, and C.A. Lawrence Ultra-lightweight carbon fibre/thermoplastic composite material using spread tow technology Compos B Eng 2013
114. T. Yokozeki, A. Kuroda, A. Yoshimura, T. Ogasawara, and T. Aoki Damage characterization in thin-ply composite laminates under out-of-plane transverse loadings Compos Struct 93 1 2010 49 57
115. H. Saito, M. Morita, K. Kawabe, M. Kanesaki, H. Takeuchi, and M. Tanaka Effect of ply-thickness on impact damage morphology in CFRP laminates J Reinf Plast Compos 30 13 2011 1097 1106
116. Swolfs Y, Gorbatikh L, Hine P, Ward I, Verpoest I. Toughening of carbon fibre composites by hybridization with self-reinforced polypropylene. In: Proceedings of the 9th international conference on composite science and technology. Sorrento, Italy; 2013.
117. N.L. Hancox Fibre composite hybrid materials 1981 Applied Science Publishers Ltd. London
118. Z.S. Wu, X. Wang, K. Iwashita, T. Sasaki, and Y. Hamaguchi Tensile fatigue behaviour of FRP and hybrid FRP sheets Compos Part B - Eng 41 5 2010 396 402
119. R.F. Dickson, G.F. Fernando, T. Adam, H. Reiter, and B. Harris Fatigue behavior of hybrid composites. Part 2. Carbon-glass hybrids J Mater Sci 24 1 1989 227 233
120. G. Fernando, R.F. Dickson, T. Adam, H. Reiter, and B. Harris Fatigue behavior of hybrid composites. Part 1. Carbon-kevlar hybrids J Mater Sci 23 10 1988 3732 3743
121. K.E. Hofer Jr., N. Rao, and M. Stander Fatigue behaviour of graphite/glass/epoxy hybrid composites Carbon Fibres 1974 201 212
122. K.E. Hofer, M. Stander, and L.C. Bennett Degradation and enhancement of the fatigue behavior of glass/graphite/epoxy hybrid composites after accelerated aging Polym Eng Sci 18 2 1978 120 127
123. Y. Shan, K.F. Lai, K.T. Wan, and K. Liao Static and dynamic fatigue of glass-carbon hybrid composites in fluid environment J Compos Mater 36 2 2002 159 172
124. B. Burks, D. Armentrout, and M. Kumosa Characterization of the fatigue properties of a hybrid composite utilized in high voltage electric transmission Compos A Appl Sci Manuf 42 9 2011 1138 1147
125. B. Burks, and M. Kumosa The effects of atmospheric aging on a hybrid polymer matrix composite Compos Sci Technol 72 15 2012 1803 1811
126. B. Burks, J. Middleton, and M. Kumosa Micromechanics modeling of fatigue failure mechanisms in a hybrid polymer matrix composite Compos Sci Technol 72 15 2012 1863 1869
127. Yu H, Potter KD, Wisnom MR. Aligned short fibre composites with high performance. In: Van Hoa S, Hubert P, editors. 19th International conference on composites materials. Montreal, Canada: CACSMA; 2013. p. 2583-90.
128. Czél G, Wisnom MR. Study of non-linear tensile behaviour of discontinuous carbon-epoxy prepreg composites. In: Van Hoa S, Hubert P, editors. 19th International conference on composite materials. Montreal, Canada: CACSMA; 2013. p. 4410-8.
129. M. Jalalvand, G. Czél, and M.R. Wisnom Numerical modelling of the damage modes in UD thin carbon/glass hybrid laminates Compos Sci Technol 94 2014 39 47
130. W. Somboonsong, F.K. Ko, and H.G. Harris Ductile hybrid fiber reinforced plastic reinforcing bar for concrete structures: design methodology ACI Mater J 95 6 1998 655 666
131. V.C. Li Can concrete be bendable? The notoriously brittle building material may yet stretch instead of breaking Am Sci 100 6 2012 484 493
132. V.C. Li On Engineered Cementitious Composites (ECC) - a review of the material and its applications J Adv Concr Technol 1 3 2003 215 230
133. M.G. Callens, L. Gorbatikh, and I. Verpoest Ductile steel fibre composites with brittle and ductile matrices Compos A Appl Sci Manuf 61 2014 235 244
134. S. Thysen Mechanical behavior of hybrid steel and glass fibre composites [Master thesis] 2013 KU Leuven Leuven
135. Y. Swolfs, L. Crauwels, L. Gorbatikh, and I. Verpoest The influence of weave architecture on the mechanical properties of self-reinforced polypropylene Compos A Appl Sci Manuf 53 2013 129 136
136. Y. Swolfs, Q. Zhang, J. Baets, and I. Verpoest The influence of process parameters on the properties of hot compacted self-reinforced polypropylene composites Compos A Appl Sci Manuf 65 2014 38 46
137. Y. Swolfs, W. Van den fonteyne, J. Baets, and I. Verpoest Failure behaviour of self-reinforced polypropylene at and below room temperature Compos A Appl Sci Manuf 65 2014 100 107
138. A. Peijs, R.W. Venderbosch, and P.J. Lemstra Hybrid composites based on polyethylene and carbon fibres. Part 3: impact resistant structural composites through damage management Composites 21 6 1990 522 530
139. M.T. Dehkordi, H. Nosraty, M.M. Shokrieh, G. Minak, and D. Ghelli Low velocity impact properties of intra-ply hybrid composites based on basalt and nylon woven fabrics Mater Des 31 8 2010 3835 3844
140. A. Pegoretti, E. Fabbri, C. Migliaresi, and F. Pilati Intraply and interply hybrid composites based on E-glass and poly(vinyl alcohol) woven fabrics: tensile and impact properties Polym Int 53 9 2004 1290 1297
141. S. Jayabal, U. Natarajan, and S. Sathiyamurthy Effect of glass hybridization and staking sequence on mechanical behaviour of interply coir-glass hybrid laminate Bull Mater Sci 34 2 2011 293 298
142. C. Pavithran, P.S. Mukherjee, and M. Brahmakumar Coir-glass intermingled fibre hybrid composites J Reinf Plast Compos 10 1 1991 91 101
143. L.Q.N. Tran, C.A. Fuentes, C. Dupont-Gillain, A.W. Van Vuure, and I. Verpoest Understanding the interfacial compatibility and adhesion of natural coir fibre thermoplastic composites Compos Sci Technol 80 2013 23 30
144. P. Hine, M. Bonner, I. Ward, Y. Swolfs, I. Verpoest, and A. Mierzwa Hybrid carbon fibre/nylon 12 single polymer composites Compos A Appl Sci Manuf 65 2014 19 26
145. Y. Swolfs, L. Crauwels, E. Van Breda, L. Gorbatikh, P. Hine, and I. Ward Tensile behaviour of intralayer hybrid composites of carbon fibre and self-reinforced polypropylene Compos A Appl Sci Manuf 59 2014 78 84
146. I. Verpoest, S. Lomov, Y. Swolfs, P. Jacquet, V. Michaud, and J.-A. Manson Advanced materials enabling high-volume road transport applications of lightweight structural composite parts SAMPE J 50 3 2014 30 37
147. S. Nunna, P.R. Chandra, S. Shrivastava, and A.K. Jalan A review on mechanical behavior of natural fiber based hybrid composites J Reinf Plast Compos 31 11 2012 759 769
148. M. Jawaid, H.P.S.A. Khalil, and A. Abu Bakar Woven hybrid composites: tensile and flexural properties of oil palm-woven jute fibres based epoxy composites Mater Sci Eng, A 528 15 2011 5190 5195
149. N. Venkateshwaran, A. Elayaperumal, and G.K. Sathiya Prediction of tensile properties of hybrid-natural fiber composites Compos B Eng 43 2 2012 793 796
150. M. Idicula, K. Joseph, and S. Thomas Mechanical performance of short banana/sisal hybrid fiber reinforced polyester composites J Reinf Plast Compos 29 1 2010 12 29
151. I.M. De Rosa, C. Santulli, F. Sarasini, and M. Valente Effect of loading-unloading cycles on impact-damaged jute/glass hybrid laminates Polym Compos 30 12 2009 1879 1887
152. I.M. De Rosa, C. Santulli, F. Sarasini, and M. Valente Post-impact damage characterization of hybrid configurations of jute/glass polyester laminates using acoustic emission and IR thermography Compos Sci Technol 69 7-8 2009 1142 1150
153. J.H.S. Almeida Jr, S.C. Amico, E.C. Botelho, and F.D.R. Amado Hybridization effect on the mechanical properties of curaua/glass fiber composites Compos B Eng 55 2013 492 497
154. L.U. Devi, S.S. Bhagawan, and S. Thomas Dynamic mechanical analysis of pineapple leaf/glass hybrid fiber reinforced polyester composites Polym Compos 31 6 2010 956 965
155. C. Santulli, M. Janssen, and G. Jeronimidis Partial replacement of E-glass fibers with flax fibers in composites and effect on falling weight impact performance J Mater Sci 40 13 2005 3581 3585
156. M.S. Sreekala, J. George, M.G. Kumaran, and S. Thomas The mechanical performance of hybrid phenol-formaldehyde-based composites reinforced with glass and oil palm fibres Compos Sci Technol 62 3 2002 339 353
157. K. John, and S.V. Naidu Tensile properties of unsaturated polyester-based sisal fiber-glass fiber hybrid composites J Reinf Plast Compos 23 17 2004 1815 1819
158. K. Sabeel Ahmed, and S. Vijayarangan Tensile, flexural and interlaminar shear properties of woven jute and jute-glass fabric reinforced polyester composites J Mater Process Technol 207 1-3 2008 330 335
159. S.C. Amico, C.C. Angrizani, and M.L. Drummond Influence of the stacking sequence on the mechanical properties of glass/sisal hybrid composites J Reinf Plast Compos 29 2 2010 179 189
160. H.P.S.A. Khalil, C.W. Kang, A. Khairul, R. Ridzuan, and T.O. Adawi The effect of different laminations on mechanical and physical properties of hybrid composites J Reinf Plast Compos 28 9 2009 1123 1137
161. P.N. Khanam, H.P.S.A. Khalil, M. Jawaid, G.R. Reddy, C.S. Narayana, and S.V. Naidu Sisal/carbon fibre reinforced hybrid composites: tensile, flexural and chemical resistance properties J Polym Environ 18 4 2010 727 733
162. V.A. Patel, B.D. Bhuva, and P.H. Parsania Performance evaluation of treated-untreated jute-carbon and glass-carbon hybrid composites of bisphenol-C based mixed epoxy-phenolic resins J Reinf Plast Compos 28 20 2009 2549 2556
163. A. Atiqah, M.A. Maleque, M. Jawaid, and M. Iqbal Development of kenaf-glass reinforced unsaturated polyester hybrid composite for structural applications Compos B Eng 56 2014 68 73