Synthesis and characterization of rapeseed oil bio-lubricant dispersed with nano copper oxide: Its effect on wear and frictional behavior of piston ring-cylinder liner combination

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

Volumn 228, Issue 11, 2014, Pages 1308-1318

  Arumugam, S ^a   Sriram, G ^a  

^a SCSVMV UNIVERSITY   (India)

Author keywords

bio lubricant; nanoadditive; Rapeseed oil; vegetable oil

Indexed keywords

ADDITIVES; ATOMIC FORCE MICROSCOPY; CHEMICAL MODIFICATION; CHEMICAL STABILITY; CYLINDERS (SHAPES); LUBRICATING OILS; MORPHOLOGY; NANOPARTICLES; OILSEEDS; PETROLEUM ADDITIVES; PISTON RINGS; PISTONS; SCANNING ELECTRON MICROSCOPY; SURFACE MORPHOLOGY; TRIBOLOGY; VEGETABLE OILS; WEAR OF MATERIALS; WEAR RESISTANCE; X RAY POWDER DIFFRACTION;

BIO LUBRICANTS; HIGH FREQUENCY RECIPROCATING RIG; MORPHOLOGICAL CHARACTERIZATION; NANOADDITIVE; RAPESEED OIL; SCANNING ELECTRON MICROSCOPIC; SYNTHESIS AND CHARACTERIZATIONS; THERMO-OXIDATIVE STABILITY;

COPPER OXIDES;

EID: 84907546656     PISSN: 13506501     EISSN: 2041305X     Source Type: Journal    
DOI: 10.1177/1350650114535384     Document Type: Article

References (26)

1. Salimon J, Salih N, Yousif E. Biolubricants: Raw materials, chemical modifications and environmental benefits. Eur J Lipid Sci Technol. 2010 ; 112: 519-530
2. Bartz WJ. Ecotribology: Environmentally acceptable tribological issues. Tribol Int. 2006 ; 39 (8). 728-733
3. Sharma BK, Adhvaryu A, Perez JM, et al. Bio based grease with improved oxidation performance for industrial application. J Agric Food Chem. 2006 ; 54: 7594-7599
4. Uosukainen E, Linko YY, Lamasa M, et al. Transesterification of trimethylolpropane and rapeseed oil methyl ester to environmentally acceptable lubricants. J Am Oil Chem Soc. 1998 ; 75: 1557-1563
5. Fang JH, Pan FS, Chen BS, et al. Friction and wear performances of magnesium alloy against steel under lubrication of rapeseed oil with S-containing additive. Trans Nonferr Met Soc China. 2011 ; 21 (12). 2649-2653
6. Ajith Kumar G, Jayadas NH, Bhasi M. Analysis of the pour point of coconut oil as a lubricant base stock using differential scanning calorimetry. Lubr Sci. 2009 ; 21: 13-26
7. Goud VV, Mungroo R, Pradhan NC, et al. Modification of epoxidized canola oil. Asia-Pacific J Chem Eng. 2011 ; 6: 4-22
8. Adhvaryu A, Erhan SZ. Epoxidized soybean oil as a potential source of high temperature lubricants. J Ind Crops Prod. 2002 ; 15: 247-254
9. Wu XD, Zhang XG, Yang SR, et al. The study of epoxidized rapeseed oil used as a potential biodegradable lubricant. J Am Oil Chem Soc. 2000 ; 77 (5). 561-563
10. Salimon J, Salih N. Oleic acid diesters: Synthesis, characterization and low temperature properties. Eur J Sci Res. 2009 ; 32: 216-222
11. Lee PM, Priest M, Stark M, et al. Extraction and tribological investigation of top piston ring zone oil from a gasoline engine. Proc IMechE, Part J: J Engineering Tribology. 2006 ; 220: 171-180
12. Smith O, Priest M, Taylor RI, et al. Simulated fuel dilution and friction-modifier effects on piston ring friction. Proc IMechE, Part J: J. Engineering Tribology. 2006 ; 220: 181-189
13. Papadopoulos P, Priest M, Rainforth WM. Investigation of fundamental wear mechanisms at the piston ring and cylinder wall interface in internal combustion engines. Proc IMechE, Part J: J Engineering Tribology. 2007 ; 221: 333-343
14. Arumugam S, Sriram G. Effect of bio-lubricant and biodiesel-contaminated lubricant on tribological behavior of cylinder liner-piston ring combination. Tribol Trans. 2012 ; 55: 438-445
15. Arumugam S, Sriram G and Santhanam V. Formulation of green crankcase oil - A novel approach. In: IEEEInternational conference on advances in engineering science and management, Nagapattinam, Tamil Nadu, India, 30-31 March 2012, pp.2530.
16. Arumugam S, Sriram G. Synthesis and characterization of rapeseed oil bio-lubricant -Its effect on wear and frictional behavior of piston ring- cylinder liner combination. Proc IMechE, Part J: J Engineering Tribology. 2013 ; 227: 3-15
17. Wu YY, Tsui WC, Liu TC. Experimental analysis of tribological properties of lubricating oils with nano particle additives. Wear. 2007 ; 262: 819-825
18. Demas NG, Timofeeva EV, Routbort JL, et al. Tribological effects of BN and MoS2 nano particles added to polyalphaolefin oil in piston skirt/cylinder liner tests. Tribol Lett. 2012 ; 47: 91-102
19. Thottackkad MV, Perikinalil RK, Kumarapillai PN. Experimental evaluation on the tribological properties of coconut oil by the addition of CuO nano particles. Int J Precis Eng Manuf. 2012 ; 13: 111-116
20. Kleinova A, Fodran P, Brncalova L, et al. Substituted esters of stearic acid as potential lubricants. Biomass Bioenergy. 2008 ; 32 (4). 366-371
21. Rajesh Kumar B, Subbarao T. AFM studies on surface morphology, topography and texture of nano structured zinc aluminium oxide thin films. Dig J Nanomater Biostruct. 2012 ; 7(4): 1881-1889
22. Arumugam S, Sriram G and Rajmohan T. Multi response optimization of epoxidation process parameters of rapeseed oil using response surface methodology (RSM) based desirability analysis. Arab J SciEng. DOI: 10.1007/s13369-013-0789-5.
23. Poley J. Diesel engine used oil analysis. In: ER Booser (ed.) Tribology data handbook. Boca Raton: CRC Press, ch. 18, 1997.
24. Tung SC, Gao H. Tribological characteristics and surface interaction between piston ring coatings and a blend of energy-conserving oils and ethanol fuels. Wear. 2003 ; 255: 1276-1285
25. Van de Voort FR, Sedman J, Cocciardi RA, et al. FTIR condition monitoring of In-service lubricants: On going developments and future perspectives. Tribol Trans. 2006 ; 49 (3). 410-418
26. Goud VV, Pradhan NC, Patwardhan AV. Epoxidation of Karanja oil (Pongamia glabra) by H2O2 - Kinetics and side reactions. J Am Oil Chem Soc. 2006 ; 83: 635-640