Adhesive forces and surface properties of cold gas plasma treated UHMWPE

Colloids and Surfaces A: Physicochemical and Engineering Aspects

Volumn 460, Issue , 2014, Pages 83-89

  Preedy, Emily Callard ^a   Brousseau, Emmanuel ^b   Evans, Sam L ^b   Perni, Stefano ^a,c   Prokopovich, Polina ^a,b,c  

^a CARDIFF UNIVERSITY   (United Kingdom)

^b CARDIFF UNIVERSITY   (United Kingdom)

^c Massachusetts Institute of Technology   (United States)

Author keywords

Adhesion forces; AFM; Cold atmospheric plasma treatment; Material modification; Surface topography; UHMWPE

Indexed keywords

ADHESION; BIOCOMPATIBILITY; BONE; FRICTION; HELIUM; HYDROPHILICITY; PLASMA APPLICATIONS; SURFACE TOPOGRAPHY; ULTRAHIGH MOLECULAR WEIGHT POLYETHYLENES;

ADHESION FORCES; AFM; BIOCOMPATIBLE POLYMER; COLD ATMOSPHERIC PLASMAS; HYDROPHILIC SURFACES; LOW FRICTION COEFFICIENTS; MATERIAL MODIFICATIONS; WEAR CHARACTERISTICS;

NONMETALLIC MATRIX COMPOSITES;

HELIUM; OXYGEN; POLYMER; PROTEIN; SILICATE; ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE; WATER;

ADHESION; ARTICLE; BONE REGENERATION; CELL ADHESION; COLD ATMOSPHERIC PLASMA; CONTACT ANGLE; ENERGY; HIP; HYDROPHILICITY; IMPLANT; KNEE ARTHROPLASTY; LABORATORY TEST; PERFORMANCE; SURFACE PROPERTY; TECHNOLOGY;

EID: 84907101586     PISSN: 09277757     EISSN: 18734359     Source Type: Journal    
DOI: 10.1016/j.colsurfa.2014.03.052     Document Type: Article

References (46)

1. Dressler M.R., et al. Predicting wear of UHMWPE: decreasing wear rate following a change in direction. Wear 2011, 271(11-12):2879-2883.
2. Jeffery A.K. Articular cartilage and the orthopaedicsurgeon. Part 2: Degeneration, injury and repair. Curr. Orthop. 1994, 8(2):108-115.
3. Suh J.-K., et al. Basic science of articular cartilage injury and repair. Operative Tech. Sports Med. 1995, 3(2):78-86.
4. Goldring S.R., Goldring M.B. Clinical aspects, pathology and pathophysiology of osteoarthritis. J. Musculoskelet. Neuronal Interact. 2006, 6(4):376-378.
5. Frankel L., et al. Osteoarthritis patients' perceptions of appropriateness for total joint replacement surgery. Osteoarthritis Cartilage 2012, 20(9):967-973.
6. Katz J.N. Total joint replacement in osteoarthritis. Best Pract. Res. Clin. Rheumatol. 2006, 20(1):145-153.
7. Brach Del Prever E.M., et al. UHMWPE for arthroplasty: past or future?. J. Orthop. Traumatol. 2009, 10(1):1-8.
8. Fisher J. Wear of ultra high molecular weight polyethylene in total artificial joints. Curr. Orthop. 1994, 8(3):164-169.
9. Prokopovich P., et al. Spatial variation of wear on Charite´ lumbar discs. Acta Biomater. 2011, 7(11):3914-3926.
10. Davis J.R. Handbook of materials for medical devices. Overview of Biomaterials and Their Uses in Medical Devices 2003, ASM International.
11. Wilches L.V., Uribe J.A., Toro A. Wear of materials used for artificial joints in total hip replacements. Wear 2008, 265(1-2):143-149.
12. Lapcikova M., et al. Nanometer size wear debris generated from ultra high molecular weight polyethylene in vivo. Wear 2009, 266(1-2):349-355.
13. Perni S., Kong M.G., Prokopovich P. Cold atmospheric pressure gas plasma enhances the wear performance of ultra-high molecular weight polyethylene. Acta Biomater. 2012, 8(3):1357-1365.
14. Cummings C.S., et al. The effects of proton radiation on UHMWPE material properties for space flight and medical applications. Adv. Space Res. 2011, 48(10):1572-1577.
15. Turos A., et al. The effects of ion bombardment of ultra-high molecular weight polyethylene. Nucl. Instrum. Methods Phys. Res., Sect. B: Beam Interact. Mater. At. 2006, 249(1-2):660-664.
16. Goldman M., Pruitt L. Comparison of the effects of gamma radiation and low temperature hydrogen peroxide gas plasma sterilization on the molecular structure, fatigue resistance, and wear behavior of UHMWPE. J. Biomed. Mater. Res. 1998, 40(3):378-384.
17. Bracco P., et al. Radiation-induced crosslinking of UHMWPE in the presence of co-agents: chemical and mechanical characterisation. Polymer 2005, 46(24):10648-10657.
18. Bielin´ski D.M., et al. Ion bombardment of polyethylene-influence of polymer structure. Vacuum 2007, 81(10):1256-1260.
19. Liu H., et al. Surface modification of ultra-high molecular weight polyethylene (UHMWPE) by argon plasma. Appl. Surf. Sci. 2010, 256(12):3941-3945.
20. Bracco P., et al. Stabilisation of ultra-high molecular weight polyethylene with Vitamin E. Polym. Degrad. Stab. 2007, 92(12):2155-2162.
21. Tendero C., et al. Atmospheric pressure plasmas: a review. Spectrochim. Acta, B: At. Spectrosc. 2006, 61(1):2-30.
22. Chug A., et al. Osseointegration-molecular events at the bone-implant interface: a review. J. Oral. Maxillofac. Surg. Med. Pathol. 2013, 25(1):1-4.
23. Walsh J.L., Kong M.G. Contrasting characteristics of linear-field and cross-field atmospheric plasma jets. Appl. Phys. Lett. 2008, 93(11):111501-111503.
24. Cao Z.et al. Spatially extended atmospheric plasma arrays. Plasma Sources Sci. Technol. 2010, 19(2):025003.
25. Sader J.E., et al. Method for the calibration of atomic force microscope cantilevers. Rev. Sci. Instrum. 1995, 66(7):3789-3798.
26. Prokopovich P., Perni S. Multiasperity contact adhesion model for universal asperity height and radius of curvature distributions. Langmuir 2010, 26(22):17028-17036.
27. Nalaskowski J., et al. Adhesion between hydrocarbon particles and silica surfaces with different degrees of hydration as determined by the AFM colloidal probe technique. Am. Chem. Soc. 2003, 19:5311-5317.
28. Sader J.E., et al. Spring constant calibration of atomic force microscope cantilevers of arbitrary shape. Rev. Sci. Instrum. 2012, 83(10):103705.
29. Craig V.S.J., Neto C. In situ calibration of colloid probe cantilevers in force microscopy: hydrodynamic drag on a sphere approaching a wall. Langmuir 2001, 17(19):6018-6022.
30. Mahapoonyanont N., et al. Power of the test of one-way Anova after transforming with large sample size data. Procedia Soc. Behav. Sci. 2010, 9(0):933-937.
31. Kagan A., Letac G. Characterization of the normal distribution through the power of a one-way ANOVA. J. Stat. Plann. Inference 1999, 77(1):1-9.
32. Gordon A.Y. Unimprovability of the Bonferroni procedure in the class of general step-up multiple testing procedures. Stat. Probab. Lett. 2007, 77(2):117-122.
33. Hommel G., Bernhard G. Bonferroni procedures for logically related hypotheses. J. Stat. Plann. Inference 1999, 82(1-2):119-128.
34. Ruxton G.D., Beauchamp G. Some suggestions about appropriate use of the Kruskal-Wallis test. Anim. Behav. 2008, 76(3):1083-1087.
35. ® macro implementation of a multiple comparison post hoc test for a Kruskal-Wallis analysis. Comput. Methods Programs Biomed. 2011, 102(1):75-80.
36. Johnson K.L., Kendall K., Roberts A.D. Surface energy and the contact of elastic solids. Math. Phys. Sci. 1971, 324:301-313.
37. Derjaguin K.L., Muller V.M., Toporov Y.P. Effect of contact deformation on the adhesion of particles. J. Colloid Interface Sci. 1975, 53(2):314-326.
38. Prokopovich P., Starov V. Adhesion models: from single to multiple asperity contacts. Adv. Colloid Interface Sci. 2011, 168(1-2):210-222.
39. Prokopovich P., Perni S. Comparison of JKR- and DMT-based multi-asperity adhesion model: theory and experiment. Colloids Surf., A: Physicochem. Eng. Aspects 2011, 383(1-3):95-101.
40. Patel S., Hossain F.S., Haddad F.S. Focus on bearing surfaces in lower limb total joint arthroplasty. J. Bone Joint Surg. 2010, 357(3):1-4.
41. Bush A.W., Gibson R.D., Thomas T.R. The elastic contact of a rough surface. Wear 1975, 35(1):87-111.
42. Hunter A., et al. Attachment and proliferation of osteoblasts and fibroblasts on biomaterials for orthopaedic use. Biomaterials 1995, 16(4):287-295.
43. Wang N., et al. Nanomechanical and tribological characterization of the MPC phospholipid polymer photografted onto rough polyethylene implants. Colloids Surf., B: Biointerfaces 2013, 108(0):285-294.
44. Khan S.N., et al. Osseointegration and more-a review of literature. Indian J. Dent. 2012, 3(2):72-76.
45. Anselme K. Osteoblast adhesion on biomaterials. Biomaterials 2000, 21(7):667-681.
46. Goda T., et al. Photoinduced phospholipid polymer grafting on Parylene film: advanced lubrication and antibiofouling properties. Colloids Surf., B: Biointerfaces 2007, 54(1):67-73.