Effect of deposition parameters on mechanical properties of shaped metal deposition parts

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

Volumn 226, Issue 1, 2012, Pages 126-136

  Baufeld, B ^a  

^a UNIVERSITY OF SHEFFIELD   (United Kingdom)

Author keywords

Additive layer manufacturing; Mechanical properties; Shaped metal deposition; Titanium alloy

Indexed keywords

BASE PLATES; DEPOSITION PARAMETERS; ENERGY INPUTS; LAYER MANUFACTURING; LAYER MANUFACTURING TECHNIQUES; MECHANICAL PERFORMANCE; METAL DEPOSITION; PART GEOMETRY; SHAPED METAL DEPOSITION; THERMAL HISTORY; TI-6AL-4V; TUNGSTEN INERT GAS WELDING; ULTIMATE TENSILE STRENGTH; WIRE FEED RATE; YOUNG'S MODULUS;

DEPOSITION RATES; FABRICATION; HARDNESS; INERT GASES; MECHANICAL PROPERTIES; STRAIN RATE; TENSILE STRENGTH; TENSILE TESTING; TITANIUM; TITANIUM ALLOYS; TUNGSTEN; VANADIUM; WIRE;

DEPOSITION;

EID: 84855950080     PISSN: 09544054     EISSN: 20412975     Source Type: Journal    
DOI: 10.1177/0954405411403669     Document Type: Conference Paper

References (30)

1. Clark, D., Bache, M., and Whittaker, M. Shaped metal deposition of a nickel alloy for aero engine applications. J. Mater. Process. Technol., 2008, 203(1-3), 439-448.
2. Skiba, T., Baufeld, B., and Van der Biest, O. Microstructure and mechanical properties of stainless steel component manufactured by shaped metal deposition. ISIJ Int., 2009, 49(10), 1588-1591.
3. Skiba, T., Baufeld, B., and van der Biest, O. Shaped metal deposition of 300M steel. Proc. IMechE, Vol. 225, Part B, J. Engng Manuf., 2011, in press.
4. Katou, M., Oh, J., Miyamoto, Y., Matsuura, K., and Kudoh, M. Freeform fabrication of titanium metal and intermetallic alloys by three-dimensional micro welding. Mater. Design, 2007, 28(7), 2093-2098. (Pubitemid 46796676)
5. Charles, C. and Järvstrat, N. Development of a microstructure model for metal deposition of titanium alloy Ti-6Al-4V. In Proceedings of the 11th World Conference on Titanium (Ti-2007), Kyoto, Japan, 2007, pp. 1201-1204.
6. Charles, C. and Järvstrat, N. Modelling Ti-6Al-4V microstructure by evolution laws implemented as finite element subroutines: application to TIG metal deposition. Trends in Welding Research, In Proceedings of the 8th International Conference, Pine Mountain, GA, USA, 2008, pp. 477-485. DOI: 10.1361/cp2008twr477.
7. Baufeld, B., Swarnakar, A. K., van der Biest, O., and Gault, R.Shaped metal deposition of Ti: microstructure and mechanical properties. In Proceedings of MS&T 2009, Pittsburgh, USA, 2009, pp. 2057-2068.
8. Baufeld, B. and van der Biest, O. Mechanical properties of Ti-6Al-4V specimens produced by shaped metal deposition. Sci. Technol. Adv. Mater., 2009, 10(1). DOI: 10.1088/1468-6996/10/1/015008.
9. Baufeld, B., van der Biest, O., and Dillien, S. Texture and crystal orientation in Ti-6Al-4V builds fabricated by shaped metal deposition. Metallurg. Mater. Trans. A, 2009, 41(8), 2010-1917.
10. Baufeld, B., Van der Biest, O., and Gault, R. Microstructure of Ti-6Al-4V specimens produced by shaped metal deposition. Int. J. Mater. Res, 2009, 100(11), 1536-1542.
11. Baufeld, B., van der Biest, O., and Gault, R. Additive manufacturing of Ti-6Al-4V components by shaped metal deposition: microstructure and mechanical properties. Mater. Design, 2010, 31(S1), S106-S111.
12. Baufeld, B., van der Biest, O., Gault, R., and Ridgway, K. Manufacturing Ti-6Al-4V components by shaped metal deposition: microstructure and mechanical properties. Proceedings of TRAM 2009, Sheffield, UK.
13. Baufeld, B., Brandl, E., and Van der Biest, O. Wire based additive layer manufacturing: comparison of microstructure and mechanical properties of Ti-6Al-4V components fabricated by laser-beam deposition and shaped metal deposition. J. Mater. Process. Technol., 2011, 211(6), 1146-1158.
14. Boyer, R., Welsch, G., and Collings, E. W. Materials properties handbook: Titanium alloys, 1994 (ASM International, Materials Park, OH, USA).
15. Lampman, S. R. Wrought titanium and titanium alloys. In ASM Handbook, Vol. 2, Properties and Selection: Nonferrous Alloys and Special-Purpose Materials (Eds J. R. Davis and P. Allen), 1990, pp. 592-633 (ASM International, Materials Park, OH, USA).
16. Ahmed, T. and Rack, H. J. Phase transformations during cooling in a b titanium alloys. Mater. Sci. Engng A, 1998, 243(1-2), 206-211. (Pubitemid 128406825)
17. Leyens, C. and Peters, M. Titanium and titanium alloys, 2003 (Wiley-VCH, Weinheim).
18. Kobryn, P. A. and Semiatin, S. L. Microstructure and texture evolution during solidification processing of Ti-6Al-4V. J. Mater. Process. Technol., 2003, 135(2-3), 330-339.
19. Kelly, S. M. and Kampe, S. L. Microstructural evolution in laser-deposited multilayer Ti-M-4V builds: Part I. Microstructural characterization. Metallurg. Mater. Trans. A, 2004, 35A(6), 1861-1867.
20. Kelly, S. M. and Kampe, S. L. Microstructural evolution in laser-deposited multilayer Ti-6AI-4V builds: Part II. Thermal modeling. Metallurg. Mater. Trans. A, 2004, 35A(6), 1869-1879.
21. Nowotny, S., Scharek, S., Beyer, E., and Richter, K.- H. Laser beam build-up welding: precision in repair, surface cladding, and direct 3D metal deposition. J. Thermal Spray Technol., 2007, 16(3), 344-348. (Pubitemid 47322401)
22. Brandl, E., Leyens, C., Dalle-Donne, C., and Holzinger, V.Deposition of Ti-6Al-4V using Nd:YAG laser and wire: microstructure and mechanical properties. NATO AVTZ-163 Specialists' Meeting on Additive Technology for Repair of Military HardwareBonn, 2009, pp. 1-13.
23. Dinda, G. P., Song, L., and Mazumder, J. Fabrication of Ti-6Al-4V Scaffolds by Direct Metal Deposition. Metallurg. Mater. Trans. A, 2008, 39A(12), 2914-2922.
24. Taminger, K. M. and Hafley, R. A.Electron beam freeform fabrication for cost effective near-net shape manufacturing. NATO/RTOAVT-139 Specialists' Meeting on Cost Effective Manufacture via Net Shape Processing, Processing, Amsterdam, the Netherlands, 2006, pp. 9-25.
25. Fachinotti, V. D., Cardona, A., Baufeld, B., and Van der Biest, O. Evolution of microstructure during shaped metal deposition. In Mecanica Computacional, vol. 29 (Eds E. Dvorkin, M. Goldschmit and M. Storti), 2010, pp. 4927-4934 (Asociacion Argentina de Mecanica Computacional, Buenos Aires, Argentina).
26. Swarnakar, A. K., Van der Biest, O., and Baufeld, B. Thermal expansion and lattice parameters of shaped metal deposited Ti-6Al-4V. J. Alloys Compd, 2011, 509(6), 2723-2728.
27. Brandl, E., Leyens, C., and Palm, F. Mechanical properties of additive manufactured Ti-6Al-4V using wire and powder based processes. Trends in Aerospace Manufacturing (TRAM), Sheffield, UK, 2009.
28. Swarnakar, A. K., Van der Biest, O., and Baufeld, B. Young's modulus and damping in dependence on temperature of Ti-6A-4V components fabricated by shaped metal deposition. Journal of Materials Science, 2011, 46(11), 3802-3811. DOI: 10.1007/s10853-011-5294-1.
29. Lütjering, G. Influence of processing on microstructure and mechanical properties of (a+b) titanium alloys. Mater. Sci. Engng A, 1998, 243(1-2), 32-45. (Pubitemid 128406802)
30. Burgers, W. G. On the process of transition of the cubic-body-centered modification into the hexagonal-close-packed modification of zirconium. Physica, 1934, 1(7-12), 561-586.