High Energy Fluid Jet Machining (HEFJet-Mach): From scientific and technological advances to niche industrial applications

CIRP Annals - Manufacturing Technology

Volumn 63, Issue 2, 2014, Pages 751-771

  Axinte, D A ^a   Karpuschewski, B ^b   Kong, M C ^c   Beaucamp, A T ^d,e   Anwar, S ^a   Miller, D ^f   Petzel, M ^b  

^a UNIVERSITY OF NOTTINGHAM   (United Kingdom)

^b OTTO VON GUERICKE UNIVERSITY   (Germany)

^c UNIVERSITY OF BIRMINGHAM   (United Kingdom)

^d CHUBU UNIVERSITY   (Japan)

^e ZEEKO LTD   (United Kingdom)

^f Finepart AB ^*  (Sweden)

Author keywords

Abrasion; Fluid jet; Waterjet machining

Indexed keywords

ABRASION; TECHNOLOGY;

DEVELOPMENT OF SCIENCE AND TECHNOLOGIES; DIFFICULT-TO-CUT MATERIALS; FLUID JET; MACHINE MAINTENANCE; NICHE APPLICATIONS; TECHNOLOGICAL ADVANCES; WATER-JET MACHINING; WORKPIECE MATERIALS;

MANUFACTURE;

EID: 84905908834     PISSN: 00078506     EISSN: 17260604     Source Type: Journal    
DOI: 10.1016/j.cirp.2014.05.001     Document Type: Article

References (181)

1. Abrasive Feeding System 2013 Waterjet AG Aarwangen, Switzerland
2. M. Achtsnick High Performance Micro Abrasive Blasting (Ph.D. Thesis) 2005 TU Delft The Netherlands
3. M. Achtsnick, J. Drabbe, A. Hoogstrate, and B. Karpuschewski Erosion Behaviour and Pattern Transfer Accuracy of Protecting Masks for Micro-abrasive Blasting Journal of Materials Processing Technology 149 1-3 2004 43 49
4. M. Achtsnick, A.M. Hoogstrate, and B. Karpuschewski Advances in High Performance Micro Abrasive Blasting Annals of the CIRP 54 1 2005 281 284
5. A. Akkurt Effect of Feed Rate on Surface Roughness in Abrasive Waterjet Cutting Applications Journal of Materials Processing Technology 147 3 2004 389 396
6. M. Annoni, and M. Monno Waterjet Decoating WJTA American Waterjet Conference, Paper 1-E 2003
7. M. Annoni, F. Arleo, and M. Guagliano Water Jet Peening of a Low-Alloy Steel by Means of a Standard Water Jet Cutting Machine Under Different Process Conditions Structural Durability & Health Monitoring 6 1 2010 1 16
8. M. Annoni, L. Cristaldi, S. Member, and M. Lazzaroni Measurements, Analysis, and Interpretation of the Signals From a High-Pressure Waterjet Pump IEEE Transactions on Instrumentation and Measurement 57 1 2008 34 47
9. M. Annoni, L. Cristaldi, S. Member, M. Norgia, and C. Svelto Measurement of Water Jet Velocity Distribution Using Laser Velocimetry IEEE Transactions on Instrumentation and Measurement 57 8 2008 1524 1528
10. M. Annoni, A. Monno, and A. Henning The Continuous Control of the Abrasive Mass Flow Rate and Feed Rate as a New Opportunity in the AWJ Precision Machining 16th International Conference on Water Jetting 2002 315 327
11. A.I. Ansari, and M. Hashish Effect of Abrasive Waterjet Parameters on Volume Removal Trends in Turning ASME Journal of Engineering for Industry 117 4 1995 475 484
12. S. Anwar, D.A. Axinte, and A.A. Becker Finite Element Modelling of a Single-Particle Impact During Abrasive Waterjet Milling Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 225 8 2011 821 832
13. S. Anwar, D.A. Axinte, and A.A. Becker Finite Element Modelling of Overlapping Abrasive Waterjet Milled Footprints Wear 303 2013 426 436
14. S. Anwar, D.A. Axinte, and A.A. Becker Finite Element Modelling of Abrasive Waterjet Milled Footprints Journal of Materials Processing Technology 213 2 2013 180 193
15. D. Arola, M.L. Mccain, S. Kunaporn, and M. Ramulu Waterjet and Abrasive Waterjet Surface Treatment of Titanium?: A Comparison of Surface Texture and Residual Stress Control 249 2002 943 950
16. M. Arola, and M. Ramulu A Study of Kerf Characteristics in Abrasive Water Jet Machining of Graphite/Epoxy Composite Journal of Engineering Materials and Technology 118 2 1996 256 265
17. D.A. Axinte, and M.C. Kong An Integrated Monitoring Method to Supervise Waterjet Machining CIRP Annals - Manufacturing Technology 58 1 2009 303 306
18. D.A. Axinte, D.S. Srinivasu, J. Billingham, and M. Cooper Geometrical Modelling of Abrasive Waterjet Footprints: A Study for 90̊ Jet Impact Angle CIRP Annals - Manufacturing Technology 59 1 2010 341 346
19. D.A. Axinte, D.S. Srinivasu, M.C. Kong, and P.W. Butler-Smith Abrasive Waterjet Cutting of Polycrystalline Diamond: A Preliminary Investigation International Journal of Machine Tools and Manufacture 49 10 2009 797 803
20. D.A. Axinte, J.P. Stepanian, M.C. Kong, and J. McGourlay Abrasive Waterjet Turning - An Efficient Method to Profile and Dress Grinding Wheels International Journal of Machine Tools and Manufacture 49 3-4 2009 351 356
21. D. Axinte, and D.S. Srinivasu Freeform Jet, Nottingham Innovative Manufacturing Research Centre - Final Report 2009 Univeristy of Nottingham UK
22. M.A. Azmir, and A.K. Ahsan Investigation on Glass/Epoxy Composite Surfaces Machined by Abrasive Water Jet Machining Journal of Materials Processing Technology 198 1-3 2008 122 128
23. M.K. Babu, and O.V.K. Chetty A Study on Recycling of Abrasives in Abrasive Water Jet Machining Wear 254 7-8 2003 763 773
24. R. Balz, and K.C. Heiniger Determination of Spatial Velocity Distributions of Abrasive Particles in Abrasive Water Jets Using Laser-induced Fluorescence Under Real Conditions Proceedings of 16th WJTA-IMCA Conference and Expo 2011
25. R. Balz, R. Mokso, C. Narayanan, D.A. Weiss, and K.C. Heiniger Ultra-Fast X-Ray Particle Velocimetry Within a Three-Phase Flow Experiments in Fluids 54 3 2013 1 13
26. A. Beaucamp Novel Ultra-Precision Finishing Processes for Optical Surfaces in Infra-Red to X-Ray Applications 2012 Chubu University
27. A. Beaucamp, R. Freeman, A. Matsumoto, and Y. Namba Fluid Jet and Bonnet Polishing of Optical Moulds for Applications from Visible to X-Ray SPIE Optical Engineering+ Application, International Society for Optics and Photonics 2011 81260U
28. A. Beaucamp, and Y. Namba Super-Smooth Finishing of Diamond Turned Hard X-Ray Molding Dies by Combined Fluid Jet and Bonnet Polishing CIRP Annals - Manufacturing Technology 62 1 2013 315 318
29. A. Beaucamp, Y. Namba, and R. Freeman Dynamic Multiphase Modeling and Optimization of Fluid Jet Polishing Process CIRP Annals - Manufacturing Technology 61 1 2012 315 318
30. J. Billingham, C.B. Miron, D.A. Axinte, and M.C. Kong Mathematical Modelling of Abrasive Waterjet Footprints for Arbitrarily Moving Jets: Part II - Overlapped Single and Multiple Straight Paths International Journal of Machine Tools and Manufacture 68 2013 30 39
31. J.G.A. Bitter A Study of Erosion Phenomena, Part 2 Wear 6 1963 161 190
32. S. Booij Fluid Jet Polishing - Possibilities and Limitations of a New Fabrication Technique (Ph.D. Thesis) 2003 Technical University of Delft
33. J.H.M.T.T. Boonkkamp, and J.K.M. Jansen An Analytical Solution for Mechanical Etching of Glass by Powder Journal of Engineering Mathematics 43 2-4 2002 385 399
34. F. Boud, C. Carpenter, J. Folkes, and P.H. Shipway Abrasive Waterjet Cutting of a Titanium Alloy: The Influence of Abrasive Morphology and Mechanical Properties on Workpiece Grit Embedment and Cut Quality Journal of Materials Processing Technology 210 15 2010 2197 2205
35. M.J. Bunce, and T.R. Fewell Portable Cutting Applications 18th International Conference on Water Jetting Gdansk, Poland 2006
36. T. Burzynski, and M. Papini Level Set Methods for the Modelling of Surface Evolution in the Abrasive Jet Micromachining of Features Used in MEMS and Microfluidic Devices Journal of Micromechanics and Microengineering 20 8 2010 085004
37. Bystronic Geschäftseinheit Wasserstrahlschneiden 2009
38. F.L. Chen, E. Siores, K. Patel, and A.W. Momber Minimising Particle Contamination at Abrasive Waterjet Machined Surfaces by a Nozzle Oscillation Technique International Journal of Machine Tools and Manufacture 42 13 2002 1385 1390
39. A. Chillman, M. Ramulu, and M. Hashish Waterjet Peening and Surface Preparation at 600 MPa: A Preliminary Experimental Study Journal of Fluids Engineering 129 4 2007 485
40. X. Claude, A. Merlen, B. Thery, and O. Gatti Abrasive Waterjet Velocity Measurements Proceedings from the 14th International Conference on Jet Cutting Technology 1998 235 251
41. Conform2Jet, http://conformjet.eu/.
42. L. Cui, L. An, L. Mao, and J. Li Application of Infrared Thermal Testing and Mathematical Models for Studying the Temperature Distributions of the High-Speed Waterjet Journal of Materials Processing Technology 209 9 2009 4360 4365
43. Cutting Edge of Precision Waterjet Systems, http://www.medicaldevice- network.com/features/feature98991/feature98991-1.html.
44. S. Dallaire Slurry Erosion Resistance of Boride-Based Overlays Containing Boride Crystals Oriented Perpendicularly to the Wearing Surface Wear 297 1-2 2013 1006 1015
45. R. Deam Modelling of the Abrasive Water Jet Cutting Process Wear 257 9-10 2004 877 891
46. M.G. Droubi, R.L. Reuben, and G. White Acoustic Emission Monitoring of Abrasive Particle Impacts on Carbon Steel Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 226 3 2012 187 204
47. M.S. Eltobgy, E. Ng, and M.A. Elbestawi Finite Element Modeling of Erosive Wear International Journal of Machine Tools and Manufacture 45 2005 1337 1346
48. E.O. Ezugwu, and Z.M. Wang Materials Titanium Alloys and Their Machinability - A Review Journal of Materials Processing Technology 68 1997 262 274
49. O.W. Fähnle, H. Brug, and H.J. Frankena Fluid Jet Polishing of Optical Surfaces Applied Optics 37 28 1998 6771 6773
50. J.M. Fan, C.Y. Wang, and J. Wang Modelling the Erosion Rate in Micro Abrasive Air Jet Machining of Glasses Wear 266 9-10 2009 968 974
51. H. Fang, P. Guo, and J. Yu Surface Roughness and Material Removal in Fluid Jet Polishing Applied Optics 45 17 2006 4012 4019
52. H. Fang, P. Guo, and J. Yu Dwell Function Algorithm in Fluid Jet Polishing Applied Optics 18 2006 4291 4296
53. Y. Feng, W. Jianming, and L. Feihong Numerical Simulation of Single Particle Acceleration Process by SPH Coupled FEM for Abrasive Waterjet Cutting The International Journal of Advanced Manufacturing Technology 59 1-4 2011 193 200
54. Finecut AB, http://www.finecut.se/page/3/services.aspx.
55. I. Finnie The Mechanism of Erosion of Ductile Metals Proceedings of the 3rd U.S. National Congress of Applied Mechanics New York, USA 1958 527 532
56. G. Fowler, I.R. Pashby, and P.H. Shipway The Effect of Particle Hardness and Shape When Abrasive Water Jet Milling Titanium Alloy Ti6Al4V Wear 266 7-8 2009 613 620
57. G. Fowler, P. Shipway, and I. Pashby A Technical Note on Grit Embedment Following Abrasive Water-Jet Milling of a Titanium Alloy Journal of Materials Processing Technology 159 3 2005 356 368
58. G. Fowler, P. Shipway, and I. Pashby Abrasive Water-Jet Controlled Depth Milling of Ti6Al4V Alloy an Investigation of the Role of Jet Workpiece Traverse Speed and Abrasive Grit Size on the Characteristics of the Milled Material Journal of Materials Processing Technology 161 3 2005 407 414
59. R.R. Freeman, A. Beaucamp, D. Walker, R. Morton, and G. McCavana Advances in Small-Tool Polishing for Free-Form Surfaces Frontiers in Optics, OSA Technical Digest 2004
60. H. Getu, A. Ghobeity, J. Spelt, and M. Papini Abrasive Jet Micromachining of Acrylic and Polycarbonate Polymers at Oblique Angles of Attack Wear 265 5-6 2008 888 901
61. A. Ghobeity, T. Krajac, T. Burzynski, M. Papini, and J.K. Spelt Surface Evolution Models in Abrasive Jet Micromachining Wear 264 3 2008 185 198
62. J. Gonzalez-Garcia, A. Cordero-Davila, E. Luna, M. Nunez, E. Ruiz, L. Salas, V. Cabrera-Pelaez, I. Cruz-Gonzalez, and E. Sohn Static and Dynamic Removal Rates of a New Hydrodynamic Polishing Tool Applied Optics 43 18 2004 3623 3631
63. S.K. Gordeev, S.G. Zhukov, L.V. Danchukova, and T. Ekström Method of Manufacturing a Diamond Composite and a Composite Produced by Same US Patent 6,447,852 2002
64. D. Griffin, A. Daadbin, and S. Datta The Development of a Three-Dimensional Finite Element Model for Solid Particle Erosion on an Alumina Scale/MA956 Substrate Wear 256 2004 900 906
65. P. Gudimetla, J. Wang, and W. Wong Kerf Formation Analysis in the Abrasive Waterjet Cutting of Industrial Ceramics Journal of Materials Processing Technology 128 2002 123 129
66. P. Gudimetla, and P.K.D.V. Yarlagadda Finite Element Analysis of the Interaction Between an AWJ Particle and a Polycrystalline Alumina Ceramic Journal of Achievements in Materials and Manufacturing Engineering 23 1 2007 7 14
67. P. Guo, H. Fang, and J. Yu Edge Effect in Fluid Jet Polishing Applied Optics 45 26 2006 6729 6735
68. A. Hascalik, U. Caydas, and H. Gurun Effect of Traverse Speed on Abrasive Waterjet Machining of Ti-6Al-4V Alloy Materials & Design 28 6 2007 1953 1957
69. M. Hashish A Modeling Study of Metal Cutting with Abrasive-Waterjets ASME Transactions - Journal of Engineering Materials and Technology 106 1984 88 100
70. M. Hashish Visualisation of Surfaces Machined with Abrasive Waterjet Cutting Process Experimental Mechanics 28 2 1988 159 168
71. M. Hashish Pressure Effects in Abrasive Waterjet (AWJ) Machining Journal Engineering Materials and Technology ASME 111 1989 221 228
72. M. Hashish AWJ Milling of Gamma Titanium Aluminide Journal of Manufacturing Science and Engineering 132 4 1991
73. M. Hashish Characteristics of Surfaces Machined with Abrasive Waterjet Journal of Engineering Materials and Technology 113 1991 354 362
74. M. Hashish Optimization Factors in Abrasive-Waterjet Machining ASME Journal of Engineering for Industry 113 1991 29 37
75. M. Hashish Inside Abrasive Waterjet Nozzles WJTA American Waterjet Conference 2003
76. M. Hashish Abrasive Waterjet Machining Advances and Challenges 1st Annual manufacturing Technology Summit 2004
77. M. Hashish Machining Airframe Composites with Abrasive Waterjet JEC Composites Magazine 47 2009 54 58
78. M. Hashish Robotic Waterjet Cutting 20th International Conference on Water Jetting 2010
79. M. Hashish, D.O. Monserud, S.J. Craigen, M.H. Marvin, P.H. Tacheron, D.H. Bothell, R.C. Lilley, and P.J. Miles Method and Apparatus for Abrasive WaterJet Millings US Patent 57048241998 1998
80. A.I. Hassan, and J. Kosmol Dynamic Elastic-Plastic Analysis of 3D Deformation in Abrasive Waterjet Machining Journal of Materials Processing Technology 113 2001 337 341
81. A.I. Hassan, C. Chen, and R. Kovacevic On-line Monitoring of Depth of Cut in AWJ Cutting International Journal of Machine Tools and Manufacture 44 6 2004 595 605
82. K.C. Heiniger Introduction to the Flow States in Water Jet Systems 2001 FHA University of Applied Sciences Krakow, Poland
83. A.M. Hoogstrate Towards High-Definition Abrasive Waterjet Cutting - A Model-Based Approach to Plan Small-Batch Cutting Operations of Advanced Materials by High Pressure Abrasive Waterjets (Ph.D. Thesis) 2000 TU Delft The Netherlands
84. A.M. Hoogstrate, T. Susuzlu, and B. Karpuschewski High Performance Cutting with Abrasive Waterjets beyond 400 MPa Quality 55 1 2006 1 4
85. J.J. Hopkins, A. Hawes, and L. William Method and Apparatus for Sealing an Ultrahigh-Pressure Fluid System US Patent 7247006 2007
86. L. Huang, J. Folkes, P. Kinnell, and P.H. Shipway Mechanisms of Damage Initiation in a Titanium Alloy Subjected to Water Droplet Impact During Ultra-High Pressure Plain Waterjet Erosion Journal of Materials Processing Technology 212 9 2012 1906 1915
87. H. Iseki Flexible and Incremental Bulging of Sheet Metal Using High-Speed Waterjet JSME International Journal, Series C 44 2 2001 486 493
88. ISO, Contact-Free Cutting - Water Jet Cutting - Geometrical Product Specification and Quality (Standard Proposal).
89. Y. Iwai, T. Miyajima, T. Honda, T. Matsubara, K. Kanda, and S. Hogmark Evaluation of Erosive Wear Resistance of TiN Coatings by a Slurry Jet Impact Test Wear 261 1 2006 112 118
90. Y. Iwai, T. Miyajima, A. Mizuno, T. Honda, T. Itou, and S. Hogmark Micro-Slurry-Jet Erosion (MSE) Testing of CVD TiC/TiN and TiC Coatings Wear 267 1-4 2009 264 269
91. M. Junkar, K.C. Heiniger, and B. Jurisevic Application of Water Jet Technology for Incremental Sheet Metal Forming Strojniski Vestnik - Journal of Mechanical Engineering 50 12 2004 613 622
92. M. Junkar, B. Jurisevic, M. Fajdiga, and M. Grah Finite Element Analysis of Single-Particle Impact in Abrasive Water Jet Machining International Journal of Impact Engineering 32 7 2006 1095 1112
93. B. Jurisevic, K. Kuzman, and M. Junkar Water Jetting Technology: An Alternative in Incremental Sheet Metal Forming The International Journal of Advanced Manufacturing Technology 31 1-2 2005 18 23
94. B. Karpuschewski, and M. Petzel Ice Blasting - An Innovative Concept for the Problem-Oriented Deburring of Workpieces Burrs - Analysis, Control and Removal 2010 197 201
95. B. Karpuschewski, T. Emmer, K. Schmidt, and M. Petzel Cryogenic Wet-Ice Blasting - Process Conditions and Possibilities CIRP Annals - Manufacturing Technology 62 1 2013 319 322
96. M.C. Kong Response of Special Purpose Aerospace Materials to Abrasive Waterjet Machining (Ph.D. Thesis) 2010 The University of Nottingham Nottingham, UK
97. M.C. Kong, and D. Axinte Response of Titanium Aluminide Alloy to Abrasive Waterjet Cutting: Geometrical Accuracy and Surface Integrity Issues Versus Process Parameters Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 223 1 2009 19 42
98. M.C. Kong, S. Anwar, J. Billingham, and D.A. Axinte Mathematical Modelling of Abrasive Waterjet Footprints for Arbitrarily Moving Jets: Part I - Single Straight Paths International Journal of Machine Tools and Manufacture 53 1 2012 58 68
99. M.C. Kong, D. Axinte, and W. Voice An Innovative Method to Perform Maskless Plain Waterjet Milling for Pocket Generation: A Case Study in Ti-Based Superalloys International Journal of Machine Tools and Manufacture 51 7-8 2011 642 648
100. M.C. Kong, D. Axinte, and W. Voice Aspects of Material Removal Mechanism in Plain Waterjet Milling on Gamma Titanium Aluminide Journal of Materials Processing Technology 210 3 2010 573 584
101. M.C. Kong, D. Axinte, and W. Voice Challenges in Using Waterjet Machining of NiTi Shape Memory Alloys: An Analysis of Controlled-Depth Milling Journal of Materials Processing Technology 211 6 2011 959 971
102. M.C. Kong, D. Srinivasu, D. Axinte, W. Voice, J. McGourlay, and B. Hon On Geometrical Accuracy and Integrity of Surfaces in Multi-Mode Abrasive Waterjet Machining of NiTi Shape Memory Alloys CIRP Annals - Manufacturing Technology 62 1 2013 555 558
103. W. Kordonski, A. Shorey, and M. Tricard Magnetorheological Jet Finishing Technology Journal of Fluids Engineering 128 1 2006 20 26
104. R. Kösters, and A. Lüdtke Wear Part Formed of a Diamond-Containing Composite Material, and Production Method US Patent 7879129 2011
105. R. Kovacevic, R. Mohan, and H.E. Beardsley Monitoring of Thermal Energy Distribution in Abrasive Waterjet Cutting Using Infrared Thermography Journal of Manufacturing Science and Engineering 118 4 1996 555 563
106. F. Kroos Randschichtverfestigung durch Hochdruck-Wasserstrahlen 1995 University of Hannover
107. M.K. Kulekci Processes and Apparatus Developments in Industrial Waterjet Applications International Journal of Machine Tools and Manufacture 42 12 2000 1297 1306
108. M.K. Kulekci, and A. Güray Endüstriyel Malzemeleri Keserek ekillendirmede Su Jeti uygulamalar 8th Denizli Malzeme Sempozyumu 2000 85 93
109. S. Kunaporn, M. Ramulu, M.G. Jenkins, and M. Hashish Residual Stress Induced by Waterjet Peening: A Finite Element Analysis Journal of Pressure Vessel Technology 126 3 2004 333
110. A. Lebar, M. Junkar, A. Poredoš, and M. Cvjeticanin Method for Online Quality Monitoring of AWJ Cutting by Infrared Thermography CIRP Journal of Manufacturing Science and Technology 2 3 2010 170 175
111. Z. Li, S. Li, Y. Dai, and X. Peng Optimization and Application of Influence Function in Jet Polishing Applied Optics 49 15 2010 2947 2953
112. H.T. Liu, D. McNiel, E. Schubert, and A. Tupin Micro-AWJ Technology for meso-micro machining Proceedings of the WJTA American Waterjet Conference 2011
113. P. Liu Flash Vaporizing Water Jet and Piercing with Flash Vaporization WIPO Patent 2008033248 2008
114. P.T.H. Liu Abrasive Jet Systems, Including Abrasive Jet Systems Utilizing Fluid Repelling Materials, and Associated Methods US Patent 13/038,779 2011
115. P.T.H. Liu, and E.H. Schubert Piercing and/or Cutting Devices for Abrasive Waterjet Systems and Associated Systems and Methods WIPO Patent 2012048047 2012
116. I.C.A.V. Luttervelt, and H.J.J. Kals Modelling of High Velocity, Loose Abrasive Machining Processes Power 2 2002 2 5
117. C. Ma, and R. Deam A Correlation for Predicting the Kerf Profile from Abrasive Water Jet Cutting Experimental Thermal and Fluid Science 30 4 2006 337 343
118. L. Ma, R. Bao, and Y. Guo Waterjet Penetration Simulation by Hybrid Code of SPH and FEA International Journal of Impact Engineering 35 9 2008 1035 1042
119. T. Mabrouki Numerical Simulation and Experimental Study of the Interaction Between a Pure High-Velocity Waterjet And Targets: Contribution to Investigate the Decoating Process Wear 239 2 2000 260 273
120. T. Mabrouki, and K. Raissi Stripping Process Modelling: Interaction Between a Moving Waterjet and Coated Target International Journal of Machine Tools and Manufacture 42 11 2002 1247 1258
121. A.R. Machado, and J. Wallbank Machining of Titanium and Its Alloys: A Review Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 204 1 1990 53 60
122. K. Maniadaki, and A. Antoniadis Effect of Impact Angle and Velocity in Crater Circularity in Abrasive Water Jet Machining by Means of Multi-Particle Impact Simulation International Journal of Machining and Machinability of Materials 10 2011 34 47
123. K. Maniadaki, T. Kestis, N. Bilalis, and A. Antoniadis A Finite Element-Based Model for Pure Waterjet Process Simulation The International Journal of Advanced Manufacturing Technology 31 9-10 2006 933 940
124. R. Manu, and N.R. Babu An Erosion-Based Model for Abrasive Waterjet Turning of Ductile Materials Wear 266 11-12 2009 1091 1097
125. T.R. Massa, J.J. Prizzi, and D.R. Siddle Methods of Making an Abrasive Water Jet with Superhard Materials US Patent 6,924,454 2005
126. T. Matsumura, and S. Fueki Abrasive Water Jet Machining of Glass with Stagnation Effect CIRP Annals - Manufacturing Technology 60 1 2011 355 358
127. J.A. McGeough Advanced Method of Machining 1988 Chapman & Hall London
128. F. Mendi, and M.K. Kulekci Su Jeti Teknolojisindeki Geliş meler ve Su Jeti Ile Kesme Uygulamalar Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi 1 2001 147 157
129. W. Messelink Prepolishing and Finishing of Optical Surfaces Using Fluid Jet Polishing Proceedings of SPIE 5869 2005 586908
130. W. Messelink, and O. Faehnle Exploiting the Process Stability of Fluid Jet Polishing. Optical Fabrication and Testing OSA Technical Digest 2008
131. Method of Making an Abrasive Water Jet with Superhard Materials, US Patent 6924 454 B2.
132. Micro Abrasive Waterjet Machining, http://www.med-techinnovation.com/ Articles/articles/article/57.
133. D. Miller Developments in Abrasive Waterjets for Micromachining Proceedings of the WJTA American Waterjet Conference 2003
134. D. Miller Micromachining with Abrasive Waterjets Journal of Materials Processing Technology 149 1-3 2004 37 42
135. L. Miller, and J.H. Archibald Measurement of Particle Velocities in an Abrasive Jet Cutting System Proceedings of the 6th American Water Jet Conference 1991
136. A.W. Momber The Kinetic Energy of Wear Particles Generated by Abrasive - Water-Jet Erosion Journal of Materials Processing Technology 83 1998 121 126
137. A.W. Momber Energy Transfer During the Mixing of Air and Solid Particles into a High-Speed Waterjet: An Impact-Force Study Experimental Thermal and Fluid Science 25 2001 31 41
138. A.W. Momber Stress-Strain Relation for Water-Driven Particle Erosion of Quasi-Brittle Materials Theoretical and Applied Fracture Mechanics 35 1 2001 19 37
139. A.W. Momber Hydroblasting and Coating of Steel Structures 2003 Elsevier Science Ltd. Oxford
140. A.W. Momber, and R. Kovacevic Principles of Abrasive Water Jet Machining 1998 Springer New York
141. A.W. Momber, I. Eusch, and R. Kovacevic Machining Refractory Ceramics with Abrasive Water Jets Journal of Materials Science 31 24 1996 6485 6493
142. C. Narayanan, R. Balz, D.A. Weiss, and K. Heiniger Modelling of Abrasive Particle Energy in Water Jet Cutting and Milling Devices Journal of Materials Processing Technology 213 12 2013 2201 2210
143. B.S. Nie, J.Q. Meng, and Z.F. Ji Numerical Simulation on Flow Field of Pre-mixed Abrasive Water Jet Nozzle Asia Simulation Conference - 7th International Conference on System Simulation and Scientific Computing 2008 247 251
144. K.M.C. Ojmertz Abrasive Water Jet Milling: An Experimental Investigation Proceedings of the 7th US Water Jet Conference 1993 Water Jet Technology Association 777 791
145. K.L. Pang, T. Nguyen, J.M. Fan, and J. Wang Modelling of the Micro-Channelling Process on Glasses Using an Abrasive Slurry Jet International Journal of Machine Tools and Manufacture 53 1 2012 118 126
146. K.J. Patel Quantitative Evaluation of Abrasive Contamination in Ductile Material During Abrasive Water Jet Machining and Minimising with a Nozzle Head Oscillation Technique International Journal of Machine Tools and Manufacture 44 10 2004 1125 1132
147. S. Paul, A. Hoogstrate, C. Luttervelt, and H.J. Kals An Experimental Investigation of Rectangular Pocket Milling with Abrasive Water Jet Journal of Materials Processing Technology 73 1-3 1998 179 188
148. V.N. Pi Performance Enhancement of Abrasive Waterjet Cutting 2008 TU Delft The Netherlands
149. V.N. Pi, and A.M. Hoogstrate Cost Calculation For Recycled Abrasives and for Abrasive Selecting in Abrasive Waterjet Machining International Journal of Precision Technology 1 1 2007 40 54
150. A. Rabani, I. Marinescu, and D. Axinte Acoustic Emission Energy Transfer Rate: A Method for Monitoring Abrasive Waterjet Milling International Journal of Machine Tools & Manufacture 61 2012 80 89
151. Report Global Industry Analysts Inc. Waterjet Cutting Machines: A Global Strategic Business 2010
152. P. Roth, H. Looser, K.C. Heiniger, and S. Bühler Determination of Abrasive Particle Velocity Using Laser-Induced Fluorescence and Particle Tracking Methods in Abrasive Water Jets Proceedings of 13th American Waterjet Conference 2005
153. B. Sadasivam, A. Hizal, S. Park, and D. Arola An Evaluation of Abrasive Waterjet Peening With Elastic Prestress Journal of Manufacturing Science and Engineering 131 1 2009 011010
154. Safety Manual MS-2274 Revision A 2000 Flow International Corporation
155. D.K. Shanmugam, F.L. Chen, E. Siores, and M. Brandt Comparative Study of Jetting Machining Technologies Over Laser Machining Technology for Cutting Composite Materials Composite Structures 57 1 2002 289 296
156. P. Shipway, G. Fowler, and I. Pashby Characteristics of the surface of a titanium alloy following milling with abrasive waterjets Wear 258 1-4 2005 123 132
157. D.S. Sivasrinivasu, and M. Nicolescu Issues in Machining of Hollow Core Honeycomb Sandwich Structures by Abrasive Waterjet Machining Journal of Machine Engineering 13 1 2013 117 125
158. P.J. Slikkerveer, and F.H. Veld Model for Patterned Erosion Wear 1999 377 386
159. A. Sou, S. Hosokawa, and A. Tomiyama Effects of Cavitation in a Nozzle on Liquid Jet Atomization Journal of Heat and Mass 50 17 2007 3575 3582
160. D.S. Srinivasu, and D.A. Axinte An Analytical Model for Top Width of Jet Footprint in Abrasive Waterjet Milling: A Case Study on SiC Ceramics Proceedings of the IMechE, Part B: Journal of Engineering Manufacture 225 2011
161. D.S. Srinivasu, D.A. Axinte, P.H. Shipway, and J. Folkes Influence of Kinematic Operating Parameters on Kerf Geometry in Abrasive Waterjet Machining of Silicon Carbide Ceramics International Journal of Machine Tools and Manufacture 49 14 2009 1077 1088
162. R. Srinon, D.A. Summers, R.D. Fossey, and L.J. Tyler Relative Cutting Performance of Commercially Available Abrasive Waterjet Nozzles 16th International Conference on Water Jetting, Aix-en-Provence, BHR Group 2002
163. R.M. Stark, J.G. Gardner, and M.J. O'Malley Method for Preparing Abrasive Waterjet Mixing Tubes WIPO Patent 2010042429 2010
164. T. Susuzlu, and A.M. Hoogstrate Energy Efficiency of Abrasive Waterjet Cutting Beyond 400 MPa BHR Conference 2006
165. M. Takaffoli, and M. Papini Finite Element Analysis of Single Impacts of Angular Particles on Ductile Targets Wear 267 1-4 2009 144 151
166. M. Tamulu, and D. Arola Material Removal in Abrasive Waterjet Machining of Metals a Residual Stress Analysis Wear 211 2 1997 302 310
167. A. Tazibt, F. Parsy, and N. Abriak Theoretical Analysis of the Particle Acceleration Process in Abrasive Water Jet Cutting Computational Materials Science 5 1996 243 254
168. TechniWaterjet. Electric Servo Pump, http://www.techniwaterjet.com/.
169. F.C. Tsai, B.H. Yan, C.Y. Kuan, and F.Y. Huang A Taguchi and Experimental Investigation into the Optimal Processing Conditions for the Abrasive Jet Polishing of SKD61 Mold Steel International Journal of Machine Tools and Manufacture 48 7-8 2008 932 945
170. G. Vikram, and N.R. Babu Modelling and Analysis of Abrasive Water Jet Cut Surface Topography International Journal of Machine Tools and Manufacture 42 12 2002 1345 1354
171. J. Wang Abrasive Waterjet Machining of Polymer Matrix Composites - Cutting Performance, Erosive Process and Predictive Models The International Journal of Advanced Manufacturing Technology 15 10 1999 757 768
172. J. Wang Abrasive Waterjet Machining of Engineering Materials 2003 Trans Tech Publications Ltd. Zurich, Switzerland
173. R. Wang, and M. Wang A Two-Fluid Model of Abrasive Waterjet Journal of Materials Processing Technology 210 1 2010 190 196
174. Y. Wang, and Z. Yang Finite Element Model Of Erosive Wear on Ductile and Brittle Materials Wear 265 5-6 2008 871 878
175. WARDJet Waterjet University™, Waterjet Relationship Parameters (Chapter 2), http://www.wardjet.com/waterjet-university.html.
176. G. Wenjun, W. Jianming, and G. Na Numerical Simulation for Abrasive Water Jet Machining Based on ALE Algorithm The International Journal of Advanced Manufacturing Technology 2010 247 253
177. S.S. Wu, and T.J. Kim An Application Study of Plain Waterjet Process for Coating Removal 8th US Water Jet Conference 1995 779 792
178. B.H. Yan, F.C. Tsai, L.W. Sun, and R.T. Hsu Abrasive Jet Polishing on SKD61 Mold Steel Using SiC Coated with Wax Journal of Materials Processing Technology 208 1-3 2008 318 329
179. Z.R. Yu, C.H. Kuo, C.C. Chen, W.Y. Hsu, and D.P. Tsai Study of Air-Driving Fluid Jet Polishing Proceedings of SPIE 8126 2011 1 6
180. J. Zhao, G. Galeck, and D.A. Summers The Use of Steel Grit, Garnet and Diamond Coating of Nozzles in Extending Nozzle Life 20th International Conference on Water Jetting 2010
181. H.T. Zhu, C.Z. Huang, J. Wang, Q.L. Li, and C.L. Che Experimental Study on Abrasive Waterjet Polishing for Hard-Brittle Materials International Journal of Machine Tools and Manufacture 49 7-8 2009 569 578