A finite element study of balloon expandable stent for plaque and arterial wall vulnerability assessment

Journal of Applied Physics

Volumn 116, Issue 4, 2014, Pages

  Karimi, Alireza ^a   Navidbakhsh, Mahdi ^a   Razaghi, Reza ^a  

^a IRAN UNIVERSITY OF SCIENCE AND TECHNOLOGY   (Iran)

Author keywords

[No Author keywords available]

Indexed keywords

HISTOLOGY; THERMOELECTRICITY; TISSUE;

ARTERIAL INJURIES; ARTERIAL TISSUE; BALLOON EXPANDABLE STENT; FINITE-ELEMENT STUDY; NONLINEAR FINITE ELEMENT SIMULATION; STENOSED ARTERIES; VON MISES STRESS; VULNERABILITY ASSESSMENTS;

STENTS;

EID: 84905842330     PISSN: 00218979     EISSN: 10897550     Source Type: Journal    
DOI: 10.1063/1.4891019     Document Type: Article

References (59)

1. M. Naghavi, P. Libby, E. Falk, S. W. Casscells, S. Litovsky, J. Rumberger, J. J. Badimon, C. Stefanadis, P. Moreno, and G. Pasterkamp, " From vulnerable plaque to vulnerable patient a call for new definitions and risk assessment strategies: Part I," Circulation 108, 1664-1672 (2003). 10.1161/01.CIR.0000087480.94275.97
2. A. Karimi, M. Navidbakhsh, S. Faghihi, A. Shojaei, and K. Hassani, " A finite elementinvestigation on plaque vulnerability in realistic healthy and atherosclerotic human coronary arteries," Proc. Inst. Mech. Eng., Part H 227, 148-161 (2013). 10.1177/0954411912461239
3. A. Karimi, M. Navidbakhsh, A. Shojaei, and S. Faghihi, " Measurement of the uniaxial mechanical properties of healthy and atherosclerotic human coronary arteries," Mater. Sci. Eng., C 33, 2550-2554 (2013). 10.1016/j.msec.2013.02.016
4. A. Karimi, M. Navidbakhsh, and S. Faghihi, " A comparative study on plaque vulnerability using constitutive equations," Perfusion 29, 179-184 (2014). 10.1177/0267659113502835
5. E. Barati, M. Halabian, A. Karimi, and M. Navidbakhsh, " Numerical evaluation of stenosis location effects on hemodynamics and shear stress through curved artery," J. Biomater. Tissue. Eng. 4, 358-366 (2014). 10.1166/jbt.2014.1176
6. S. Chua, B. Mac Donald, and M. Hashmi, " Finite-element simulation of stent expansion," J. Mater. Process. Tech. 120, 335-340 (2002). 10.1016/S0924-0136(01)01127-X
7. J. C. Palmaz, " Intravascular stenting: From basic research to clinical application," Cardiovasc. Intervent. Radiol. 15, 279-284 (1992). 10.1007/BF02733951
8. A. Colombo, G. Stankovic, and J. W. Moses, " Selection of coronary stents," J. Am. Coll. Cardiol. 40, 1021-1033 (2002). 10.1016/S0735-1097(02) 02123-X
9. R. T. Lee, A. J. Grodzinsky, E. H. Frank, R. D. Kamm, and F. J. Schoen, " Structure-dependent dynamic mechanical behavior of fibrous caps from human atherosclerotic plaques," Circulation 83, 1764-1770 (1991). 10.1161/01.CIR.83.5.1764
10. H. M. Loree, A. J. Grodzinsky, S. Y. Park, L. J. Gibson, and R. T. Lee, " Static circumferential tangential modulus of human atherosclerotic tissue," J. Biomech. 27, 195-204 (1994). 10.1016/0021-9290(94)90209-7
11. N. Salunke, L. Topoleski, J. Humphrey, and W. Mergner, " Compressive stress-relaxation of human atherosclerotic plaque," J. Biomed. Mater. Res. 55, 236-241 (2001). 10.1002/1097-4636(200105)55:2<236::AID-JBM1010>3.0. CO;2-F
12. A. Nair, B. D. Kuban, E. M. Tuzcu, P. Schoenhagen, S. E. Nissen, and D. G. Vince, " Coronary plaque classification with intravascular ultrasound radiofrequency data analysis," Circulation 106, 2200-2206 (2002). 10.1161/01.CIR.0000035654.18341.5E
13. T. T. de Weert, M. Ouhlous, P. E. Zondervan, J. M. Hendriks, D. W. Dippel, M. R. van Sambeek, and A. van der Lugt, " In vitro characterization of atherosclerotic carotid plaque with multidetector computed tomography and histopathological correlation," Eur. Radiol. 15, 1906-1914 (2005). 10.1007/s00330-005-2712-2
14. G. A. Holzapfel, M. Stadler, and T. C. Gasser, " Changes in the mechanical environment of stenotic arteries during interaction with stents: Computational assessment of parametric stent designs," J. Biomech. Eng. 127, 166-180 (2005). 10.1115/1.1835362
15. C. Lally, F. Dolan, and P. Prendergast, " Cardiovascular stent design and vessel stresses: A finite element analysis," J. Biomech. 38, 1574-1581 (2005). 10.1016/j.jbiomech.2004.07.022
16. D. Liang, D. Yang, M. Qi, and W. Wang, " Finite element analysis of the implantation of a balloon-expandable stent in a stenosed artery," Int. J. Cardiol. 104, 314-318 (2005). 10.1016/j.ijcard.2004.12.033
17. W.-Q. Wang, D.-K. Liang, D.-Z. Yang, and M. Qi, " Analysis of the transient expansion behavior and design optimization of coronary stents by finite element method," J. Biomech. 39, 21-32 (2006). 10.1016/j.jbiomech. 2004.11.003
18. J. Ohayon, P. Teppaz, G. Finet, and G. Rioufol, " In-vivo prediction of human coronary plaque rupture location using intravascular ultrasound and the finite element method," Coron. Artery. Dis. 12, 655-663 (2001). 10.1097/00019501-200112000-00009
19. Z.-Y. Li, S. Howarth, and R. A. Trivedi, " Stress analysis of carotid plaque rupture based on in vivo high resolution MRI," J. Biomech. 39, 2611-2622 (2006). 10.1016/j.jbiomech.2005.08.022
20. A. Karimi, M. Navidbakhsh, H. Yamada, and R. Razaghi, " A nonlinear finite element simulation of balloon expandable stent for assessment of plaque vulnerability inside a stenotic artery," Med. Biol. Eng. Comput. 52, 52 (2014).
21. I. Pericevic, C. Lally, D. Toner, and D. J. Kelly, " The influence of plaque composition on underlying arterial wall stress during stent expansion: the case for lesion-specific stents," Med. Eng. Phys. 31, 428-433 (2009). 10.1016/j.medengphy.2008.11.005
22. A. Karimi, M. Navidbakhsh, and R. Razaghi, " Dynamic simulation and finite element analysis of the human mandible injury protected by polyvinyl alcohol sponge," Mater. Sci. Eng., C 42, 608-614 (2014). 10.1016/j.msec.2014.06.001
23. S. N. David Chua, B. J. Mac Donald, and M. S. J. Hashmi, " Finite element simulation of stent and balloon interaction," J. Mater. Process. Technol. 143-144, 591-597 (2003). 10.1016/S0924-0136(03)00435-7
24. A. Karimi, M. Navidbakhsh, A. Shojaei, K. Hassani, and S. Faghihi, " Study of plaque vulnerability in coronary artery using Mooney-Rivlin model: A combination of finite element and experimental method," Biomed. Eng: Appl. Basis. Commun. 26, 145-152 (2014). 10.4015/S1016237214500136
25. C. Lally, A. Reid, and P. Prendergast, " Elastic behavior of porcine coronary artery tissue under uniaxial and equibiaxial tension," Ann. Biomed. Eng. 32, 1355-1364 (2004). 10.1114/B:ABME.0000042224.23927.ce
26. H. Zahedmanesh and C. Lally, " Determination of the influence of stent strut thickness using the finite element method: Implications for vascular injury and in-stent restenosis," Med. Biol. Eng. Comput. 47, 385-393 (2009). 10.1007/s11517-009-0432-5
27. G. A. Holzapfel, G. Sommer, C. T. Gasser, and P. Regitnig, " Determination of layer-specific mechanical properties of human coronary arteries with nonatherosclerotic intimal thickening and related constitutive modeling," Am. J. Physiol. Heart Circ. Physiol. 289, H2048-H2058 (2005). 10.1152/ajpheart.00934.2004
28. A. Karimi, M. Navidbakhsh, M. Alizadeh, and A. Shojaei, " A comparative study on the mechanical properties of the umbilical vein and umbilical artery under uniaxial loading," Artery. Res. 8, 51-56 (2014). 10.1016/j.artres.2014.02.001
29. A. Karimi, M. Navidbakhsh, and A. Motevalli Haghi, " An experimental study on the structural and mechanical properties of polyvinyl alcohol sponge using different stress-strain definitions," Adv. Polym. Tech. (published online). 10.1002/adv.21441
30. A. Karimi, M. Navidbakhsh, M. Alizadeh, and R. Razaghi, " A comparative study on the elastic modulus of polyvinyl alcohol sponge using different stress-strain definitions," Biomed. Tech. (Berl) (published online). 10.1515/bmt-2013-0110
31. A. Karimi, M. Navidbakhsh, and R. Razaghi, " An experimental-finite element analysis on the kinetic energy absorption capacity of polyvinyl alcohol sponge," Mater. Sci. Eng., C 39, 253-258 (2014). 10.1016/j.msec.2014.03.009
32. A. Karimi, M. Navidbakhsh, and S. Faghihi, " Measurement of the mechanical failure of PVA sponge using biaxial puncture test," J. Biomater. Tissue. Eng. 4, 46-50 (2014). 10.1166/jbt.2014.1134
33. A. Karimi and M. Navidbakhsh, " An experimental study on the mechanical properties of rat brain tissue using different stress-strain definitions," J. Mater. Sci. Mater. Med. 25, 1623-1630 (2014). 10.1007/s10856-014-5198-0
34. A. Karimi, R. Faturechi, M. Navidbakhsh, and A. Hashemi, " A nonlinear hyperelastic behavior to identify the mechanical properties of rat skin under uniaxial loading," J. Mech. Med. Biol. 14, 1450075-1450089 (2014).
35. S. Faghihi, M. Gheysour, A. Karimi, and R. Salarian, " Fabrication and mechanical characterization of graphene oxide-reinforced poly (acrylic acid)/gelatin composite hydrogels," J. Appl. Phys. 115, 083513-083520 (2014). 10.1063/1.4864153
36. A. Karimi, M. Navidbakhsh, T. Rezaee, and K. Hassani, " Measurement of the circumferential mechanical properties of the umbilical vein: Experimental and numerical analyses," Comput. Methods Biomech. Biomed. Eng. (published online). 10.1080/10255842.2014.910513
37. A. Karimi, M. Navidbakhsh, B. Beigzadeh, and S. Faghihi, " Hyperelastic mechanical behavior of rat brain infected by Plasmodium berghei ANKA-Experimental testing and constitutive modeling," Int. J. Damage Mech. (published online). 10.1177/1056789513514072
38. A. Karimi and M. Navidbakhsh, " Mechanical properties of polyvinyl alcohol sponge under different strain rates," Int. J. Mater. Res. 105, 404-408 (2014). 10.3139/146.111036
39. A. Karimi and M. Navidbakhsh, " Measurement of the nonlinear mechanical properties of a poly(vinyl alcohol) sponge under longitudinal and circumferential loading," J. Appl. Polym. Sci. 131, 40257-40264 (2013). 10.1002/APP.40257
40. R. W. Ogden, Non-linear Elastic Deformations (Dover, New York, 1997).
41. A. Karimi, M. Navidbakhsh, and M. Haghpanahi, " Constitutive model for numerical analysis of polyvinyl alcohol sponge under different strain rates," J. Thermoplast. Compos. Mater. (published online). 10.1177/0892705713520176
42. A. Karimi, M. Navidbakhsh, and R. Razaghi, " Dynamic finite element simulation of the human head damage mechanics protected by polyvinyl alcohol sponge," Int. J. Damage. Mech. (published online). 10.1177/1056789514535945
43. A. Karimi, M. Navidbakhsh, H. Yousefi, and M. Alizadeh, " An experimental study on the elastic modulus of gelatin hydrogel using different stress-strain definitions," J. Thermoplast. Compos. Mater. (published online). 10.1177/0892705714533377
44. A. Karimi and M. Navidbakhsh, " Material properties in unconfined compression of gelatin hydrogel for skin tissue engineering applications," Biomed. Tech. (Berl) (in press), doi: 10.1515/bmt-2014-0028.
45. A. Karimi and M. Navidbakhsh, " Measurement of the uniaxial mechanical properties of rat skin using different stress-strain definitions," Skin. Res. Tech. (in press), doi: 10.1111/srt.12171.
46. A. Karimi, M. Navidbakhsh, R. Razaghi, and M. Haghpanahi, " A computational fluid-structure interaction model for plaque vulnerability assessment in atherosclerotic human coronary arteries," J. Appl. Phys. 115, 144702-144711 (2014). 10.1063/1.4870945
47. S. Faghihi, A. Karimi, M. Jamadi, R. Imani, and R. Salarian, " Graphene oxide/poly(acrylic acid)/gelatin nanocomposite hydrogel: Experimental and numerical validation of hyperelastic model," Mater. Sci. Eng., C 38, 299-305 (2014). 10.1016/j.msec.2014.02.015
48. A. Karimi, M. Navidbakhsh, A. Motevalli Haghi, and S. Faghihi, " Measurement of the uniaxial mechanical properties of rat brains infected by Plasmodium berghei ANKA," Proc. Inst. Mech. Eng., Part H 227, 609-614 (2013). 10.1177/0954411913476779
49. A. Karimi, M. Navidbakhsh, and S. Faghihi, " Fabrication and mechanical characterization of polyvinyl alcohol sponge for tissue engineering applications," Perfusion 29, 232-238 (2014). 10.1177/0267659113513823
50. A. Karimi, M. Navidbakhsh, H. Yamada, T. Rezaee, and K. Hassani, " A comparative study on the quasilinear viscoelastic mechanical properties of umbilical artery and umbilical vein," Perfusion (in press), doi: 10.1177/0267659114536761.
51. A. Karimi, M. Navidbakhsh, H. Yousefi, A. Motevalli Haghi, and S. J. Adnani Sadati, " Experimental and numerical study on the mechanical behavior of rat brain tissue," Perfusion 29, 307-314 (2014). 10.1177/0267659114522088
52. W. Wu, W.-Q. Wang, D.-Z. Yang, and M. Qi, " Stent expansion in curved vessel and their interactions: A finite element analysis," J. Biomech. 40, 2580-2585 (2007). 10.1016/j.jbiomech.2006.11.009
53. G. A. Holzapfel, G. Sommer, and P. Regitnig, " Anisotropic mechanical properties of tissue components in human atherosclerotic plaques," J. Biomech. Eng. 126, 657-665 (2004). 10.1115/1.1800557
54. A. J. Hamilton, H. Kim, A. Nagaraj, J.-H. Mun, L. L. Yan, S. I. Roth, D. D. McPherson, and K. B. Chandran, " Regional material property alterations in porcine femoral arteries with atheroma development," J. Biomech. 38, 2354-2364 (2005). 10.1016/j.jbiomech.2004.10.018
55. A. J. Martin, A. I. Gotlieb, and R. M. Henkelman, " High-resolution MR imaging of human arteries," J. Magnet. Reson. Imag. 5, 93-100 (1995). 10.1002/jmri.1880050117
56. G. M. LaMuraglia, J. F. Southern, V. Fuster, and H. L. Kantor, " Magnetic resonance images lipid, fibrous, calcified, hemorrhagic, and thrombotic components of human atherosclerosis in vivo," Circulation 94, 932-938 (1996). 10.1161/01.CIR.94.5.932
57. L. Topoleski, N. Salunke, J. Humphrey, and W. Mergner, " Composition- and history-dependent radial compressive behavior of human atherosclerotic plaque," J. Biomed. Mater. Res. 35, 117-127 (1997). 10.1002/(SICI)1097-4636(199704)35:1<117::AID-JBM12>3.0.CO;2-G
58. A. Karimi, M. Navidbakhsh, and B. Beigzadeh, " A visco-hyperelastic constitutive approach for modeling polyvinylalcohol sponge," Tissue Cell 46, 97-102 (2014). 10.1016/j.tice.2013.12.004
59. A. Karimi and M. Navidbakhsh, " Mechanical properties of PVA material for tissue engineering applications," Mater. Technol. 29, 90-100 (2014). 10.1179/1753555713Y.0000000115