Numerical evaluation of stenosis location effects on hemodynamics and shear stress through curved artery

Journal of Biomaterials and Tissue Engineering

Volumn 4, Issue 5, 2014, Pages 358-366

  Barati, Ebrahim ^a   Halabian, Mahdi ^b   Karimi, Alireza ^b   Navidbakhsh, Mahdi ^b  

^a Ferdowsi University of Mashhad   (Iran)

^b IRAN UNIVERSITY OF SCIENCE AND TECHNOLOGY   (Iran)

Author keywords

Atherosclerotic; Blood flow; Hemodynamics; Newtonian flow; S shaped arteries

Indexed keywords

ALGORITHM; ARTICLE; BLOOD CLOTTING; BLOOD VESSEL DIAMETER; FEMORAL ARTERY; FLOW KINETICS; GEOMETRY; HEMODYNAMICS; MATHEMATICAL MODEL; PHYSICAL PARAMETERS; REYNOLD NUMBER; SHEAR STRESS; SIMULATION; STENOSIS; VELOCITY;

EID: 84920936689     PISSN: 21579083     EISSN: 21579091     Source Type: Journal    
DOI: 10.1166/jbt.2014.1176     Document Type: Article

References (36)

1. K. M. Channon, Endothelium and the Pathogenesis of Atherosclerosis. Medicine 30, 54 (2002)
2. A. G. Olson, Atherosclerosis: Biology and Clinical Science, Churchill Livingstone, London (1987)
3. A. Cheer, H. A. Dwyer, and T. Kim, New method for improved calculations of unsteady complex flows in large arteries. Acta Mathematica Scientia 31, 2274 (2011)
4. Y. Tokuda, M. H. Song, Y. Ueda, A. Usui, T. Akita, S. Yoneyama, and S. Mauruyama, Three-dimensional numerical simulation of blood flow in the aortic arch during cardiopulmonary bypass. Eur. J. Cardiothorac. Surg. 33, 164 (2007)
5. F. J. H. Gijsen, E. Allanic, F. N. Van De Vosse, and J. D. Janssen, The influence of the non-Newtonian properties of blood on the flow in large arteries: Unsteady flow in a 90_ curved tube. J. Biomech. 32, 705 (1999)
6. K. Perktold, R. M. Nerem, and R. O. Peter, A numerical calculation of flow in a curved tube model of the left main coronary artery. J. Biomech. 24, 175 (1991)
7. C. R. Ethier, S. Prakash, D. A. Steinman, R. L. Leask, G. G. Couch, and M. Ojha, Steady flow separation patterns in a 45 degree junction. J. Fluid Mech. 411, 1 (2000)
8. K. Jurczuk, M. Kretowski, J. J. Bellanger, P. A. Eliat, H. Saint-Jalmes, and J. Bézy-Wendling, Computational modeling of MR flow imaging by the lattice Boltzmann method and Bloch equation. Magnetic Resonance Imaging 31, 1163 (2013)
9. L. H. Back, T. K. Liem, E. Y. Kwack, and D. W. Crawford, Flow measurements in a highly curved atherosclerotic coronary artery cast of man. J. Biomech. Eng. 114, 232 (1992)
10. R. K. Banerjee, Y. L. Cho, and L. H. Back, Numerical studies of three-dimensional arterial flows in reverse curvature geometry: Part I–Peak flow. J. Biomech. Eng. 115, 316 (1993)
11. A. C. I. Malossi, P. J. Blanco, and S. Deparis, A two-level time step technique for the partitioned solution of one-dimensional arterial networks. Computer Methods in Applied Mechanics and Engineering 237–240, 212 (2012)
12. Y. Fan, Z. Xu, W. Jiang, X. Deng, K. Wang, and A. Sun, An S-type bypass can improve the hemodynamics in the bypassed arteries and suppress intimal hyperplasia along the host artery floor. J. Biomech. 41, 2498 (2008)
13. K. E. Lee, J. S. Lee, and J. Y. Yoo, A numerical study on steady flow in helically sinuous vascular prostheses. Medical Engineering and Physics 33, 38 (2011)
14. Y. Niu, W. K. Chu, L. C. Lee, and H. Y. Yu, Numerical evaluation of curvature effects on shear stresses across arterial stenoses. Biomed. Eng. Appli. Basis and Comm. 14, 26 (2002)
15. X. Liu, F. Pu, Y. Fan, X. Deng, D. Li, and S. Li, A numerical study on the flow of blood and the transport of LDL in the human aorta: The physiological significance of the helical flow in the aortic arch. Am. J. Physiol. Heart. Circ. Physiol. 297, H163 (2009)
16. H. Niazmand and E. Rajabi Jaghargh, Bend sweep angle and Reynolds number effects on hemodynamics of S-shaped arteries. Ann. Biomed. Eng. 38, 2817 (2010)
17. M. R. Kaazempur-Mofrad, S. Wada, J. G. Myers, and C. R. Ethier, Mass transport and fluid flow in stenotic arteries: Axisymmetric and asymmetric models. International Journal of Heat and Mass Transfer 48, 4510 (2005)
18. Z. Keshavarz-Motamed and L. Kadem, 3D pulsatile flow in a curved tube with coexisting model of aortic stenosis and coarctation of the aorta. Medical Engineering and Physics 33, 315 (2011)
19. G. Jayaraman and A. Sarkar, Nonlinear analysis of arterial blood flow—Steady streaming effect. Nonlinear Analysis: Theory, Methods and Applications 63, 880 (2005)
20. A. M. K. P. Taylor, J. H. Whitelaw, and M. Yianneskis, Developing flow in S-shaped ducts 2: Circular cross-section duct. United States: NASA contractor Report (1984)
21. A. Karimi, M. Navidbakhsh, A. Shojaei, and S. Faghihi, Measurement of the uniaxial mechanical properties of healthy and atherosclerotic human coronary arteries. Materials Science and Engineering: C 33, 2550 (2013)
22. A. Karimi, M. Navidbakhsh, S. Faghihi, A. Shojaei, and K. Hassani, A finite element investigation on plaque vulnerability in realistic healthy and atherosclerotic human coronary arteries. Proc. Inst. Mech. Eng. H 227, 148 (2013)
23. A. Karimi, M. Navidbakhsh, and S. Faghihi, A comparative study on plaque vulnerability using constitutive equations. Perfusion 29, 179 (2014)
24. A. Karimi, M. Navidbakhsh, M. Alizadeh, and A. Shojaei, A comparative study on the mechanical properties of the umbilical vein and umbilical artery under uniaxial loading. Artery Res. 8, 51 (2014)
25. A. Karimi, M. Navidbakhsh, A. Shojaei, K. Hassani, and S. Faghihi, Study of plaque vulnerability in coronary artery using Mooney- Rivlin model: A combination of finite element and experimental method. Biomed. Eng. Appli. Basis and Comm. 26, 145 (2013)
26. A. Karimi, M. Navidbakhsh, and S. Faghihi, Measurement of the mechanical failure of PVA sponge using biaxial puncture test. Journal of Biomaterials and Tissue Engineering 4, 46 (2014)
27. R. Faturechi, A. Karimi, A. Hashemi, and M. Navidbakhsh, Mechanical characterization of Peritoneum/Fascia under uniaxial loading. Journal of Biomaterials and Tissue Engineering 4, 25 (2014)
28. A. Karimi, M. Navidbakhsh, and M. Haghpanahi, Constitutive model for numerical analysis of polyvinyl alcohol sponge under different strain rates. Journal of Thermoplastic Composite Materials (2014), In press. DOI: 10.1177/0892705713520176
29. A. Karimi, M. Navidbakhsh, H. Yousefi, A. M. Haghi, and S. J. A. Sadati, Experimental and numerical study on the mechanical behavior of rat brain tissue. Perfusion (2014), In press. DOI: 10.1177/0267659114522088
30. A. Karimi, M. Navidbakhsh, B. Beigzadeh, and S. Faghihi, Hyperelastic mechanical behavior of rat brain infected by Plasmodium berghei ANKA-Experimental testing and constitutive modeling. International Journal of Damage Mechanics. (2013), In press. DOI: 10.1177/1056789513514072
31. A. Karimi, M. Navidbakhsh, and S. Faghihi, Fabrication and mechanical characterization of polyvinyl alcohol sponge for tissue engineering applications. Perfusion 29, 231 (2014)
32. A. Karimi and M. Navidbakhsh, Mechanical properties of PVA material for tissue engineering applications. Materials Technology: Advanced Performance Materials 29, 90 (2014)
33. A. Karimi, M. Navidbakhsh, and B. Beigzadeh, A visco-hyperelastic constitutive approach for modeling polyvinyl alcohol sponge. Tissue Cell 46, 97 (2014)
34. A. Karimi and M. Navidbakhsh, Measurement of the nonlinear mechanical properties of PVA sponge under longitudinal and circumferential loading. J. Appl. Polym. Sci. (2013), In press. DOI: 10.1002/app.40257
35. A. Karimi, M. Navidbakhsh, and H. Yousefi, Mechanical properties of polyvinyl alcohol sponge under different strain rates. International Journal of Materials Research (2014), In press. DOI 10.3139/146.111036
36. A. Karimi, M. Navidbakhsh, A. M. Haghi, and S. Faghihi, Measurement of the uniaxial mechanical properties of rat brains infected by Plasmodium berghei ANKA. Proc. Inst. Mech. Eng. H 227, 609 (2013).