Material properties in unconfined compression of gelatin hydrogel for skin tissue engineering applications

Biomedizinische Technik

Volumn 59, Issue 6, 2014, Pages 479-486

  Karimi, Alireza ^a   Navidbakhsh, Mahdi ^a  

^a IRAN UNIVERSITY OF SCIENCE AND TECHNOLOGY   (Iran)

Author keywords

Constitutive equation; Finite element modeling; Gelatin hydrogel; Skin tissue; Yeoh

Indexed keywords

BIOCOMPATIBILITY; BIODEGRADABILITY; BIOMECHANICS; CELL CULTURE; CELL ENGINEERING; COMPRESSION TESTING; CONSTITUTIVE EQUATIONS; ELASTIC MODULI; ELASTICITY; FINITE ELEMENT METHOD; HYDROGELS; STRAIN ENERGY; SUBSTRATES; TISSUE;

BIOMECHANICAL SIMULATION; FINITE ELEMENT SIMULATIONS; GELATIN HYDROGELS; SKIN TISSUE; STRAIN ENERGY DENSITY FUNCTIONS; TISSUE ENGINEERING APPLICATIONS; UNCONFINED COMPRESSION TESTS; YEOH;

TISSUE ENGINEERING;

EID: 84925348035     PISSN: 00135585     EISSN: None     Source Type: Journal    
DOI: 10.1515/bmt-2014-0028     Document Type: Article

References (53)

1. Ahmad M, Benjakul S, Prodpran T, Agustini TW. Physicomechanical and antimicrobial properties of gelatin film from the skin of unicorn leatherjacket incorporated with essential oils. Food Hydrocolloids 2012; 28: 189-199.
2. Bader DL, Bowker P. Mechanical characteristics of skin and underlying tissues in vivo. Biomaterials 1983; 4: 305-308.
3. Baumberger T, Caroli C, Martina D. Solvent control of crack dynamics in a reversible hydrogel. Nat Mater 2006; 5: 552-555.
4. Deepachitra R, Chamundeeswari M, Santhosh Kumar B, et al. Osteo mineralization of fibrin-decorated graphene oxide. Carbon 2013; 56: 64-76.
5. Delalleau A, Josse G, Lagarde J-M, Zahouani H, Bergheau J-M. Characterization of the mechanical properties of skin by inverse analysis combined with the indentation test. J Biomech 2006; 39: 1603-1610.
6. Faghihi S, Gheysour M, Karimi A, Salarian R. Fabrication and mechanical characterization of graphene oxide-reinforced poly (acrylic acid)/gelatin composite hydrogels. J Appl Phys 2014; 115: 083513-083520.
7. Faghihi S, Karimi A, Jamadi M, Imani R, Salarian R. Graphene oxide/poly(acrylic acid)/gelatin nanocomposite hydrogel: experimental and numerical validation of hyperelastic model. Mater Sci Eng C 2014; 38: 299-305.
8. Farahnaky A, Dadfar SMM, Shahbazi M. Physical and mechanical properties of gelatin-clay nanocomposite. J Food Eng 2014; 122: 78-83.
9. Fu Y, Xu K, Zheng X, Giacomin AJ, Mix AW, Kao WJ. 3D cell entrapment in crosslinked thiolated gelatin-poly(ethylene glycol) diacrylate hydrogels. Biomaterials 2012; 33: 48-58.
10. Gautam S, Chou C-F, Dinda AK, Potdar PD, Mishra NC. Surface modification of nanofibrous polycaprolactone/gelatin composite scaffold by collagen type I grafting for skin tissue engineering. Mater Sci Eng C 2014; 34: 402-409.
11. Gautam S, Dinda AK, Mishra NC. Fabrication and characterization of PCL/gelatin composite nanofibrous scaffold for tissue engineering applications by electrospinning method. Mater Sci Eng: C 2013; 33: 1228-1235.
12. Grover CN, Cameron RE, Best SM. Investigating the morphological, mechanical and degradation properties of scaffolds comprising collagen, gelatin and elastin for use in soft tissue engineering. J Mech Behav Biomed Mater 2012; 10: 62-74.
13. Hendriks F, Brokken D, Van Eemeren J, Oomens C, Baaijens F, Horsten J. A numerical-experimental method to characterize the non-linear mechanical behaviour of human skin. Skin Res Tech 2003; 9: 274-283.
14. Ionita M, Pandele MA, Iovu H. Sodium alginate/graphene oxide composite films with enhanced thermal and mechanical properties. Carbohydr Polym 2013; 94: 339-344.
15. Kang H-W, Tabata Y, Ikada Y. Fabrication of porous gelatin scaffolds for tissue engineering. Biomaterials 1999; 20: 1339-1344.
16. Kania RE, Meunier A, Hamadouche M, Sedel L, Petite H. Addition of fibrin sealant to ceramic promotes bone repair: long-term study in rabbit femoral defect model. J Biomed Mater Res 1998; 43: 38-45.
17. Karimi A, Navidbakhsh M. Measurement of the nonlinear mechanical properties of PVA sponge under longitudinal and circumferential loading. J Appl Polym Sci 2013; 131: 40257-40264.
18. Karimi A, Navidbakhsh M. An experimental study on the mechanical properties of rat brain tissue using different stress-strain definitions. J Mater Sci Mater Med 2014; 25: 1623-1630.
19. Karimi A, Navidbakhsh M. Mechanical properties of polyvinyl alcohol sponge under different strain rates. Int J Mater Res 2014; 4: 404-408.
20. Karimi A, Navidbakhsh M. Mechanical properties of PVA material for tissue engineering applications. Mater Tech Adv Perform Mater 2014; 29: 90-100.
21. Karimi S, Navidbakhsh M, Razaghi R. Dynamic simulation and finite element analysis of the human mandible injury protected by polyvinyl alcohol sponge. Mater Sci Eng: C 2014; 42: 608-614.
22. Karimi A, Navidbakhsh M, Alizadeh M, Razaghi R. A comparative study on the elastic modulus of polyvinyl alcohol sponge using different stress-strain definitions. Biomed. Eng.-Biomed. Tech. 2014; 59: 439-446.
23. Karimi A, Navidbakhsh M, Alizadeh M, Shojaei A. A comparative study on the mechanical properties of the umbilical vein and umbilical artery under uniaxial loading. Artery Res 2014; 8: 51-56.
24. Karimi A, Navidbakhsh M, Beigzadeh B. A visco-hyperelastic constitutive approach for modeling polyvinyl alcohol sponge. Tissue Cell 2014; 46: 97-102.
25. Karimi A, Navidbakhsh M, Beigzadeh B, Faghihi S. Hyperelastic mechanical behavior of rat brain infected by Plasmodium berghei ANKA - experimental testing and constitutive modeling. Int J Damage Mech 2013; in press. DOI: 10.1177/1056789513514072.
26. Karimi A, Navidbakhsh M, Faghihi S. Measurement of the mechanical failure of PVA sponge using biaxial puncture test. J Biomater Tissue Eng 2014; 4: 46-50.
27. Karimi A, Navidbakhsh M, Faghihi S. A comparative study on plaque vulnerability using constitutive equations. Perfusion 2014; 29: 179-184.
28. Karimi A, Navidbakhsh M, Faghihi S. Fabrication and mechanical characterization of polyvinyl alcohol sponge for tissue engineering applications. Perfusion 2014; 29: 232-238.
29. Karimi A, Navidbakhsh M, Faghihi S, Shojaei A, Hassani K. A finite element investigation on plaque vulnerability in realistic healthy and atherosclerotic human coronary arteries. Proc IMechE Part H J Eng Med 2013; 227: 148-161.
30. Karimi A, Navidbakhsh M, Haghpanahi M. Constitutive model for numerical analysis of polyvinyl alcohol sponge under different strain rates. J Thermoplast Compos Mater 2014; in press. DOI: 10.1177/0892705713520176.
31. Karimi A, Navidbakhsh M, Motevalli Haghi A, Faghihi S. Measurement of the uniaxial mechanical properties of rat brains infected by Plasmodium berghei ANKA. Proc IMechE Part H J Eng Med 2013; 227: 609-614.
32. Karimi A, Navidbakhsh M, Razaghi R. An experimental-finite element analysis on the kinetic energy absorption capacity of polyvinyl alcohol sponge. Mater Sci Eng C 2014; 39: 253-258.
33. Karimi A, Navidbakhsh M, Razaghi R. Dynamic finite element simulation of the human head damage mechanics protected by polyvinyl alcohol sponge. Int J Damage Mech 2014; in press. DOI: 10.1177/1056789514535945.
34. Karimi A, Navidbakhsh M, Razaghi R, Haghpanahi M. A computational fluid-structure interaction model for plaque vulnerability assessment in atherosclerotic human coronary arteries. J Appl Phys 2014; 115: 144702-144711.
35. Karimi A, Navidbakhsh M, Rezaii T, Hassani K. Measurement of the circumferential mechanical properties of the umbilical vein - experimental and numerical analysis. Comput Methods Biomech Biomed Eng 2014; in press. DOI: 10.1080/10255842.2014.910513.
36. Karimi A, Navidbakhsh M, Shojaei A, Faghihi S. Measurement of the uniaxial mechanical properties of healthy and atherosclerotic human coronary arteries. Mater Sci Eng C 2013; 33: 2550-2554.
37. Karimi A, Navidbakhsh M, Shojaei A, Hassani K, Faghihi S. Study of plaque vulnerability in coronary artery using Mooney-Rivlin model: a combination of finite element and experimental method. Biomed Eng Appl Basis Commun 2014; 26: 145-152.
38. Karimi A, Navidbakhsh M, Yousefi H, Alizadeh M. An experimental study on the elastic modulus of gelatin hydrogel using different stress-strain definitions. J Thermoplast Compos Mater 2014; in press. DOI: 10.1177/0892705714533377.
39. Karimi A, Navidbakhsh M, Yousefi H, Motevalli Haghi A, Adnani Sadati SJ. Experimental and numerical study on the mechanical behavior of rat brain tissue. Perfusion 2014; 29: 307-314.
40. Kaster T, Sack I, Samani A. Measurement of the hyperelastic properties of ex vivo brain tissue slices. J Biomech 2011; 44: 1158-1163.
41. Kharaziha M, Nikkhah M, Shin S-R, et al. PGS:Gelatin nanofibrous scaffolds with tunable mechanical and structural properties for engineering cardiac tissues. Biomaterials 2013; 34: 6355-6366.
42. Lamers E, van Kempen THS, Baaijens FPT, Peters GWM, Oomens CWJ. Large amplitude oscillatory shear properties of human skin. J Mech Behav Biomed Mater 2013; 28: 462-470.
43. Liu Y, Geever LM, Kennedy JE, Higginbotham CL, Cahill PA, McGuinness GB. Thermal behavior and mechanical properties of physically crosslinked PVA/Gelatin hydrogels. J Mech Behav Biomed Mater 2010; 3: 203-209.
44. Muliana A, Rajagopal KR. Modeling the response of nonlinear viscoelastic biodegradable polymeric stents. Int J Solids Struct 2012; 49: 989-1000.
45. Nagahama H, Maeda H, Kashiki T, Jayakumar R, Furuike T, Tamura H. Preparation and characterization of novel chitosan/gelatin membranes using chitosan hydrogel. Carbohydr Polym 2009; 76: 255-260.
46. Nguyen SY, Dormieux L. A Burger model for the effective behavior of a microcracked viscoelastic solid. Int J Damage Mech 2011; 20: 1116-1129.
47. Ní Annaidh A, Bruyère K, Destrade M, Gilchrist MD, Otténio M. Characterization of the anisotropic mechanical properties of excised human skin. J Mech Behav Biomed Mater 2012; 5: 139-148.
48. Ogden RW. Non-linear elastic deformations. New York: Dover 1997.
49. Pailler-Mattei C, Bec S, Zahouani H. In vivo measurements of the elastic mechanical properties of human skin by indentation tests. Med Eng Phys 2008; 30: 599-606.
50. Rashid B, Destrade M, Gilchrist MD. Inhomogeneous deformation of brain tissue during tension tests. Comput Mater Sci 2012; 64: 295-300.
51. Saarai A, Kasparkova V, Sedlacek T, Saha P. On the development and characterisation of crosslinked sodium alginate/gelatine hydrogels. J Mech Behav Biomed Mater 2013; 18: 152-166.
52. Sasson A, Patchornik S, Eliasy R, Robinson D, Haj-Ali R. Hyperelastic mechanical behavior of chitosan hydrogels for nucleus pulposus replacement - experimental testing and constitutive modeling. J Mech Behav Biomed Mater 2012; 8: 143-153.
53. Stammen JA, Williams S, Ku DN, Guldberg RE. Mechanical properties of a novel PVA hydrogel in shear and unconfined compression. Biomaterials 2001; 22: 799-806.