Analysis of porous electrospun fibers from poly(l-lactic acid)/poly(3-hydroxybutyrate-co-3-hydroxyvalerate) blends

ACS Sustainable Chemistry and Engineering

Volumn 2, Issue 8, 2014, Pages 1976-1982

  Wagner, Alexis ^a   Poursorkhabi, Vida ^a,b   Mohanty, Amar K ^a,b   Misra, Manjusri ^a,b  

^a UNIVERSITY OF GUELPH   (Canada)

^b UNIVERSITY OF GUELPH   (Canada)

Author keywords

Composite fiber; Electrospinning; Fiber characterization; PHBV; PLLA; Porosity

Indexed keywords

BLENDING; DIFFERENTIAL SCANNING CALORIMETRY; ELECTROSPINNING; FIBERS; ORGANIC POLYMERS; POROSITY; SCANNING ELECTRON MICROSCOPY; TENSILE STRENGTH; THERMOGRAVIMETRIC ANALYSIS; WEAVING;

COMPOSITE FIBERS; DYNAMIC MECHANICAL ANALYSIS (DMA); ELECTROSPINNING PROCESS; FIBER CHARACTERIZATIONS; HIGH SURFACE-TO-VOLUME RATIO; PHBV; PLLA; POLYMER CONCENTRATIONS;

TEXTILE BLENDS;

EID: 84905592628     PISSN: None     EISSN: 21680485     Source Type: Journal    
DOI: 10.1021/sc5000495     Document Type: Article

References (45)

1. Schiffman, J. D.; Schauer, C. L. A review: Electrospinning of biopolymer nanofibers and their applications Polym. Rev. 2008, 48 (2) 317-352
2. Philp, J.; Bartsev, A.; Ritchie, R.; Baucher, M.; Guy, K. Bioplastics science from a policy vantage point New Biotechnol. 2012, 30 (6) 635-646
3. Somleva, M. N.; Peoples, O. P.; Snell, K. D. PHA bioplastics, biochemicals, and energy from crops Plant Biotechnol. J. 2013, 11 (2) 233-252
4. Baccile, N. Nanomaterials from Renewable Resources. In Nanomaterials: A Danger or a Promise?; Brayner, R.; Fiévet, F.; Coradin, T., Eds.; Springer: London, 2013; pp 335-356.
5. Langeveld, H.; Sanders, J.; Meeusen, M., Eds.; The Biobased Economy: Biofuels, Materials, and Chemicals in the Post-Oil Era; Earthscan: London, 2012.
6. Agarwal, S.; Wendorff, J. H.; Greiner, A. Use of electrospinning technique for biomedical applications Polymer 2008, 49 (26) 5603-5621
7. Bhardwaj, N.; Kundu, S. C. Electrospinning: A fascinating fiber fabrication technique Biotechnol. Adv. 2010, 28 (3) 325-347
8. Kumar, P. R.; Khan, N.; Vivekanandhan, S.; Satyanarayana, N.; Mohanty, A. K.; Misra, M. Nanofibers: effective generation by electrospinning and their applications J. Nanosci. Nanotechnol. 2011, 11, 1-25
9. Nguyen, L. T.; Chen, S.; Elumalai, N. K.; Prabhakaran, M. P.; Zong, Y.; Vijila, C.; Allakhverdiev, S. I.; Ramakrishna, S. Biological, chemical, and electronic applications of nanofibers Macromol. Mater. Eng. 2012, 298 (8) 822-867
10. Shih, Y.; Yang, J.; Li, S.; Yang, W. V.; Chen, C. Bio-electrospinning of poly(l-lactic acid) hollow fibrous membrane Text. Res. J. 2012, 82 (6) 602-612
11. Feng, S.; Shen, X.; Fu, Z.; Shao, M. Preparation and characterization of gelatin-poly(l -lactic) acid/poly(hydroxybutyrate-co-hydroxyvalerate) composite nanofibrous scaffolds J. Macromol. Sci. 2011, 50 (9) 1705-1713
12. Krishnan, R.; Sundarrajan, S.; Ramakrishna, S. Green processing of nanofibers for regenerative medicine Macromol. Mater. Eng. 2012, 298 (10) 1034-1058
13. Gérard, T.; Budtova, T. In PLA-PHA Blends: Morphology, Thermal and Mechanical Properties; International Conference on Biodegradable and Biobased Polymers-BIOPOL, University of Strasbourg, France, August 29-31, 2011.
14. Nyambo, C.; Mohanty, A. K.; Misra, M. Polylactide-based renewable green composites from agricultural residues and their hybrids Biomacromolecules 2010, 11 (6) 1654-1660
15. Vink, E. T.; Rabago, K. R.; Glassner, D. A.; Gruber, P. R. Applications of life cycle assessment to NatureWorks polylactide (PLA) production Polym. Degrad. Stab. 2003, 80 (3) 403-419
16. Jamshidian, M.; Tehrany, E. A.; Imran, M.; Jacquot, M.; Desobry, S. Poly-lactic acid: Production, applications, nanocomposites, and release studies Compr. Rev. Food Sci. Food Saf. 2010, 9 (5) 552-571
17. Luzier, W. D. Materials derived from biomass/biodegradable materials Proc. Natl. Acad. Sci. U.S.A. 1992, 89 (3) 839-842
18. Nanda, M. R.; Misra, M.; Mohanty, A. K. The effects of process engineering on the performance of PLA and PHBV blends Macromol. Mater. Eng. 2011, 296 (8) 719-728
19. Zaverl, M.; Seydibeyoǧlu, M. Ö; Misra, M.; Mohanty, A. Studies on recyclability of polyhydroxybutyrate-co-valerate bioplastic: Multiple melt processing and performance evaluations J. Appl. Polym. Sci. 2012, 125 (S2) E324-E331
20. Sombatmankhong, K.; Suwantong, O.; Waleetorncheepsawat, S.; Supaphol, P. Electrospun fiber mats of poly(3-hydroxybutyrate), poly(3-hydroxybutyrate-co-3- hydroxyvalerate), and their blends J. Polym. Sci., Polym. Phys. 2006, 44 (19) 2923-2933
21. Bledzki, A.; Jaszkiewicz, A. Mechanical performance of biocomposites based on PLA and PHBV reinforced with natural fibres-A comparative study to PP Compos. Sci. Technol. 2010, 70 (12) 1687-1696
22. Shin, Y.; Hohman, M.; Brenner, M.; Rutledge, G. Electrospinning: A whipping fluid jet generates submicron polymer fibers Appl. Phys. Lett. 2001, 78, 1149
23. Ramakrishna, S.; Fujihara, K.; Teo, W.-E.; Lim, T.-C.; Ma, Z. An Introduction to Electrospinning and Nanofibers; World Scientific Publishing Company: Singapore, 2005.
24. Persano, L.; Camposeo, A.; Tekmen, C.; Pisignano, D. Industrial upscaling of electrospinning and applications of polymer nanofibers: A review Macromol. Mater. Eng. 2013, 298 (5) 504-520
25. Huang, Z.; Zhang, Y.; Kotaki, M.; Ramakrishna, S. A review on polymer nanofibers by electrospinning and their applications in nanocomposites Compos. Sci. Technol. 2003, 63 (15) 2223-2253
26. Pham, Q. P.; Sharma, U.; Mikos, A. G. Electrospinning of polymeric nanofibers for tissue engineering applications: A review Tissue Eng. 2006, 12 (5) 1197-1211
27. Megelski, S.; Stephens, J. S.; Chase, D. B.; Rabolt, J. F. Micro-and nanostructured surface morphology on electrospun polymer fibers Macromolecules 2002, 35 (22) 8456-8466
28. Tong, H.; Wang, M. Electrospinning of poly(hydroxybutyrate-co- hydroxyvalerate) fibrous scaffolds for tissue engineering applications: Effects of electrospinning parameters and solution properties J. Macromol. Sci., Part B: Phys. 2011, 50 (8) 1535-1558
29. Yu, W.; Lan, C.; Wang, S.; Fang, P.; Sun, Y. Influence of zinc oxide nanoparticles on the crystallization behavior of electrospun poly(3-hydroxybutyrate-co-3-hydroxyvalerate) nanofibers Polymer 2010, 51 (11) 2403-2409
30. Buttafoco, L.; Kolkman, N. G.; Engbers-Buijtenhuijs, P.; Poot, A. A.; Dijkstra, P. J.; Vermes, I.; Feijen, J. Electrospinning of collagen and elastin for tissue engineering applications Biomaterials 2006, 27 (5) 724-734
31. Zuo, W.; Zhu, M.; Yang, W.; Yu, H.; Chen, Y.; Zhang, Y. Experimental study on relationship between jet instability and formation of beaded fibers during electrospinning Polym. Eng. Sci. 2005, 45 (5) 704-709
32. Ero-Phillips, O.; Jenkins, M.; Stamboulis, A. Tailoring crystallinity of electrospun PLLA fibres by control of electrospinning parameters Polymers 2012, 4 (3) 1331-1348
33. Li, S.; Mccarthy, S. Influence of crystallinity and stereochemistry on the enzymatic degradation of poly(lactide)s Macromolecules 1999, 32, 4454-4456
34. Dagnon, K. L.; Chen, H. H.; Innocentini-Mei, L. H.; D'Souza, N. A. Poly[(3-hydroxybutyrate)-co-(3-hydroxyvalerate)] layered double hydroxide nanocomposites Polym. Int. 2009, 58 (2) 133-141
35. Lee, S.; Lee, J. W. Characterization and processing of biodegradable polymer blends of poly (lactic acid) with poly(butylene succinate adipate) Korea-Aust. Rheol. J. 2005, 17 (2) 71-77
36. Choi, J. S.; Lee, S. W.; Jeong, L.; Bae, S.; Min, B. C.; Youk, J. H.; Park, W. H. Effect of organosoluble salts on the nanofibrous structure of electrospun poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Int. J. Biol. Macromol. 2004, 34 (4) 249-256
37. Cheng, M.; Lin, C.; Su, H.; Chen, P.; Sun, Y. Processing and characterization of electrospun poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) nanofibrous membranes Polymer 2008, 49 (2) 546-553
38. Sultana, N.; Wang, M. PHBV/PLLA-based composite scaffolds fabricated using an emulsion freezing/freeze-drying technique for bone tissue engineering: Surface modification and in vitro biological evaluation Biofabrication 2012, 4 (1) 015003
39. McCullen, S. D.; Stano, K. L.; Stevens, D. R.; Roberts, W. A.; Monteiro-Riviere, N. A.; Clarke, L. I.; Gorga, R. E. Development, optimization, and characterization of electrospun poly(lactic acid) nanofibers containing multi-walled carbon nanotubes J. Appl. Polym. Sci. 2007, 105 (3) 1668-1678
40. Wang, C.; Cheng, Y.; Hsu, C.; Chien, H.; Tsou, S. How to manipulate the electrospinning jet with controlled properties to obtain uniform fibers with the smallest diameter? A brief discussion of solution electrospinning process J. Polym. Res. 2011, 18 (1) 111-123
41. Yarin, A.; Koombhongse, S.; Reneker, D. Taylor cone and jetting from liquid droplets in electrospinning of nanofibers J. Appl. Phys. 2001, 90 (9) 4836-4846
42. Doshi, J.; Reneker, D. H. Electrospinning process and applications of electrospun fibers J. Electrost. 1995, 35 (2) 151-160
43. Avella, M.; Martuscelli, E.; Raimo, M. Review properties of blends and composites based on poly(3-hydroxy)butyrate (PHB) and poly(3-hydroxybutyrate- hydroxyvalerate)(PHBV) copolymers J. Mater. Sci. 2000, 35 (3) 523-545
44. Cheng, M.; Chen, P.; Lan, C.; Sun, Y. Structure, mechanical properties and degradation behaviors of the electrospun fibrous blends of PHBHHx/PDLLA Polymer 2011, 52 (6) 1391-1401
45. Asran, A. S.; Salama, M.; Popescu, C.; Michler, G. Solvent influences the morphology and mechanical mroperties of electrospun poly(l -lactic acid) scaffold for tissue engineering applications Macromolecular Symposia 2010, 294, 153-161