SCOPUS 정보 검색 플랫폼

Macromolecular Materials and Engineering

Volumn 296, Issue 8, 2011, Pages 719-728

The effects of process engineering on the performance of PLA and PHBV blends

(3) Nanda, Malaya R a Misra, Manjusri a Mohanty, Amar K a

a UNIVERSITY OF GUELPH (Canada)

Author keywords

biopolymers; blends; modulus; poly(3 hydroxybutyrate co 3 hydroxyvalerate); poly(L lactic acid)

Indexed keywords

BLENDS; CRYSTALLINITIES; GORDON-TAYLOR; MELT BLENDING; MODULUS; POLY(3-HYDROXYBUTYRATE-CO-3-HYDROXYVALERATE); POLY(L -LACTIC ACID); RULE OF MIXTURE; THEORETICAL MODELING; THEORETICAL VALUES;

BIOPOLYMERS; BLENDING; LACTIC ACID; OPTIMIZATION; ORGANIC POLYMERS; PROCESS ENGINEERING;

GLASS TRANSITION;

EID: 80051635355 PISSN: 14387492 EISSN: 14392054 Source Type: Journal
DOI: 10.1002/mame.201000417 Document Type: Article

Times cited : (133)

References (44)

1
- 0033659049
- A. K. Mohanty, M. Misra, G. Hinrichsen, Macromol. Mater. Eng. 2000, 276, 1.
- (2000) Macromol. Mater. Eng. , vol.276 , pp. 1
- Mohanty, A.K.¹ Misra, M.² Hinrichsen, G.³

2
- 0038604096
- J. M. Luengo, B. Garcia, A. Sandoval, G. Naharro, E. R. Olivera, Curr. Opin. Microbiol. 2003, 6, 251.
- (2003) Curr. Opin. Microbiol. , vol.6 , pp. 251
- Luengo, J.M.¹ Garcia, B.² Sandoval, A.³ Naharro, G.⁴ Olivera, E.R.⁵

3
- 73149084896
- S. Kuciel, A. Liber-Knec, J. Biobased Mater. Bioenerg. 2009, 3, 269.
- (2009) J. Biobased Mater. Bioenerg. , vol.3 , pp. 269
- Kuciel, S.¹ Liber-Knec, A.²

4
- 36649031616
- P. Maiti, C. A. Batt, E. P. Giannelis, Biomacromolecules 2007, 8, 3393.
- (2007) Biomacromolecules , vol.8 , pp. 3393
- Maiti, P.¹ Batt, C.A.² Giannelis, E.P.³

5
- 0037929051
- M. Flieger, M. Kantorova, A. Prell, T. Rezanka, J. Votruba, Folia Microbiol. 2003, 48, 27.
- (2003) Folia Microbiol. , vol.48 , pp. 27
- Flieger, M.¹ Kantorova, M.² Prell, A.³ Rezanka, T.⁴ Votruba, J.⁵

6
- 33745593082
- R. Bhardwaj, A. K. Mohanty, L. T. Drzal, F. Pourboghrat, M. Misra, Biomacromolecules 2006, 7, 2044.
- (2006) Biomacromolecules , vol.7 , pp. 2044
- Bhardwaj, R.¹ Mohanty, A.K.² Drzal, L.T.³ Pourboghrat, F.⁴ Misra, M.⁵

7
- 0023416746
- D. Byrom, Trends Biotechnol. 1987, 5, 246.
- (1987) Trends Biotechnol. , vol.5 , pp. 246
- Byrom, D.¹

8
- 70449670915
- J. Lu, R. C. Tappel, C. T. Nomura, J. Macromol. Sci. Polym. Rev. 2009, 49, 226.
- (2009) J. Macromol. Sci. Polym. Rev. , vol.49 , pp. 226
- Lu, J.¹ Tappel, R.C.² Nomura, C.T.³

9
- 41949139326
- S. Singh, A. K. Mohanty, T. Sugie, Y. Takai, H. Hamada, Composites A 2008, 39, 875.
- (2008) Composites A , vol.39 , pp. 875
- Singh, S.¹ Mohanty, A.K.² Sugie, T.³ Takai, Y.⁴ Hamada, H.⁵

10
- 0142054848
- Z. Qiu, T. Ikehara, T. Nishi, Polymer 2003, 44, 7519.
- (2003) Polymer , vol.44 , pp. 7519
- Qiu, Z.¹ Ikehara, T.² Nishi, T.³

11
- 4944238523
- S. O. Han, W. K. Son, D. Cho, J. H. Youk, W. H. Park, Polym. Degrad. Stabil. 2004, 86, 257.
- (2004) Polym. Degrad. Stabil. , vol.86 , pp. 257
- Han, S.O.¹ Son, W.K.² Cho, D.³ Youk, J.H.⁴ Park, W.H.⁵

12
- 55349093989
- Y. Parulekar, A. K. Mohanty, Macromol. Mater. Eng. 2007, 292, 1218.
- (2007) Macromol. Mater. Eng. , vol.292 , pp. 1218
- Parulekar, Y.¹ Mohanty, A.K.²

13
- 3042816714
- B. Fei, C. Chen, H. Wu, S. Peng, X. Wang, L. Dong, Polym. Int. 2004, 53, 903.
- (2004) Polym. Int. , vol.53 , pp. 903
- Fei, B.¹ Chen, C.² Wu, H.³ Peng, S.⁴ Wang, X.⁵ Dong, L.⁶

14
- 0030282248
- J. J. Kolstad, J. Appl. Polym. Sci. 1996, 62, 1079.
- (1996) J. Appl. Polym. Sci. , vol.62 , pp. 1079
- Kolstad, J.J.¹

15
- 33744977919
- M. S. Huda, L. T. Drzal, M. Misra, A. K. Mohanty, Compos. Sci. Technol. 2006, 66, 1813.
- (2006) Compos. Sci. Technol. , vol.66 , pp. 1813
- Huda, M.S.¹ Drzal, L.T.² Misra, M.³ Mohanty, A.K.⁴

16
- 58149388045
- E. Richards, R. Rizvi, A. Chow, H. Naguib, J. Polym. Environ. 2008, 16, 258.
- (2008) J. Polym. Environ. , vol.16 , pp. 258
- Richards, E.¹ Rizvi, R.² Chow, A.³ Naguib, H.⁴

17
- 33751210885
- M. S. Huda, L. T. Drzal, M. Misra, A. K. Mohanty, J. Appl. Polym. Sci. 2006, 102, 4856.
- (2006) J. Appl. Polym. Sci. , vol.102 , pp. 4856
- Huda, M.S.¹ Drzal, L.T.² Misra, M.³ Mohanty, A.K.⁴

18
- 70349569629
- M. Todo, J. Park, H. Kuraoka, J. Kim, K. Taki, M. Ohshima, J. Mater. Sci. 2009, 44, 4191.
- (2009) J. Mater. Sci. , vol.44 , pp. 4191
- Todo, M.¹ Park, J.² Kuraoka, H.³ Kim, J.⁴ Taki, K.⁵ Ohshima, M.⁶

19
- 0347449045
- M. Avella, M. E. Errico, B. Immirzi, M. Malinconico, E. Martuscelli, L. Paolillo, L. Falcigno, Angew. Makromol. Chem. 1997, 246, 49.
- (1997) Angew. Makromol. Chem. , vol.246 , pp. 49
- Avella, M.¹ Errico, M.E.² Immirzi, B.³ Malinconico, M.⁴ Martuscelli, E.⁵ Paolillo, L.⁶ Falcigno, L.⁷

20
- 39749098388
- T. Yokohara, M. Yamaguchi, Eur. Polym. J. 2008, 44, 677.
- (2008) Eur. Polym. J. , vol.44 , pp. 677
- Yokohara, T.¹ Yamaguchi, M.²

21
- 63249124779
- S. Li, E. M. Woo, Polym. Int. 2008, 57, 1242.
- (2008) Polym. Int. , vol.57 , pp. 1242
- Li, S.¹ Woo, E.M.²

22
- 33847324596
- T. Furukawa, H. Sato, R. Murakami, J. Zhang, N. Noda, S. Ochiai, Y. Ozaki, Polymer 2007, 48, 1749.
- (2007) Polymer , vol.48 , pp. 1749
- Furukawa, T.¹ Sato, H.² Murakami, R.³ Zhang, J.⁴ Noda, N.⁵ Ochiai, S.⁶ Ozaki, Y.⁷

23
- 35349000107
- Y. Agari, K. Sakai, Y. Kano, R. Nomura, J. Polym. Sci. Part B: Polym. Phys. 2007, 45, 2972.
- (2007) J. Polym. Sci. Part B: Polym. Phys. , vol.45 , pp. 2972
- Agari, Y.¹ Sakai, K.² Kano, Y.³ Nomura, R.⁴

24
- 4544325730
- I. Noda, M. M. Satkowski, A. E. Dowrey, C. Marcott, Macromol. Biosci. 2004, 4, 269.
- (2004) Macromol. Biosci. , vol.4 , pp. 269
- Noda, I.¹ Satkowski, M.M.² Dowrey, A.E.³ Marcott, C.⁴

25
- 0028765999
- S. Innace, L. Ambrosio, S. J. Huang, L. Nicolais, J. Appl. Polym. Sci. 1994, 54, 1525.
- (1994) J. Appl. Polym. Sci. , vol.54 , pp. 1525
- Innace, S.¹ Ambrosio, L.² Huang, S.J.³ Nicolais, L.⁴

26
- 0037049141
- B. M. P. Ferreira, C. A. C. Zavaglia, E. A. R. Duek, J. Appl. Polym. Sci. 2002, 86, 2898.
- (2002) J. Appl. Polym. Sci. , vol.86 , pp. 2898
- Ferreira, B.M.P.¹ Zavaglia, C.A.C.² Duek, E.A.R.³

27
- 17644423124
- P. Krutohum, P. Supaphol, Eur. Polym. J. 2005, 41, 1561.
- (2005) Eur. Polym. J. , vol.41 , pp. 1561
- Krutohum, P.¹ Supaphol, P.²

28
- 0001106314
- M. Gordon, J. S. Taylor, J. Appl. Chem. 1952, 2, 493.
- (1952) J. Appl. Chem. , vol.2 , pp. 493
- Gordon, M.¹ Taylor, J.S.²

29
- 0003947026
- rd edition, John Wiley & Sons, New York
- rd edition, John Wiley & Sons, New York 2001, p. 69.
- (2001) Introduction to Physical Polymer Science , pp. 69
- Sperling, L.H.¹

30
- 0006327851
- J. W. Barlow, D. R. Paul, Annu. Rev. Mater. Sci. 1981, 11, 299.
- (1981) Annu. Rev. Mater. Sci. , vol.11 , pp. 299
- Barlow, J.W.¹ Paul, D.R.²

31
- 77955729237
- S. Jain, M. M. Reddy, A. K. Mohanty, M. Misra, A. K. Ghosh, Mcromol. Mater. Eng. 2010, 295, 750.
- (2010) Mcromol. Mater. Eng. , vol.295 , pp. 750
- Jain, S.¹ Reddy, M.M.² Mohanty, A.K.³ Misra, M.⁴ Ghosh, A.K.⁵

32
- 0000382189
- E. W. Fisher, H. J. Sterzel, G. Wegner, Kolloid-Z. Z. Polym. 1973, 25, 980.
- (1973) Kolloid-Z. Z. Polym. , vol.25 , pp. 980
- Fisher, E.W.¹ Sterzel, H.J.² Wegner, G.³

33
- 22944442585
- M. S. Huda, L. T. Drzal, M. Misra, A. K. Mohanty, K. Williams, F. Mielewski, Ind. Eng. Chem. Res. 2005, 44, 5593.
- (2005) Ind. Eng. Chem. Res. , vol.44 , pp. 5593
- Huda, M.S.¹ Drzal, L.T.² Misra, M.³ Mohanty, A.K.⁴ Williams, K.⁵ Mielewski, F.⁶

34
- 65349186441
- K. L. Dagnon, H. H. Chen, L. H. Innocentine-Mei, N. A. D'Souza, Polym. Int. 2009, 58, 133.
- (2009) Polym. Int. , vol.58 , pp. 133
- Dagnon, K.L.¹ Chen, H.H.² Innocentine-Mei, L.H.³ D'Souza, N.A.⁴

35
- 33847324596
- T. Furukawa, H. Sato, R. Murakami, J. Zhang, N. Noda, S. Ochiai, Y. Ozaki, Polymer 2007, 48, 1749.
- (2007) Polymer , vol.48 , pp. 1749
- Furukawa, T.¹ Sato, H.² Murakami, R.³ Zhang, J.⁴ Noda, N.⁵ Ochiai, S.⁶ Ozaki, Y.⁷

36
- 0021870587
- I. Mc Neill, H. Leiper, Polym. Degrad. Stabil. 1985, 11, 309.
- (1985) Polym. Degrad. Stabil. , vol.11 , pp. 309
- Mc Neill, I.¹ Leiper, H.²

37
- 0021820885
- I. Mc Neill, H. Leiper, Polym. Degrad. Stabil. 1985, 11, 267.
- (1985) Polym. Degrad. Stabil. , vol.11 , pp. 267
- Mc Neill, I.¹ Leiper, H.²

38
- 0025698325
- M. Kunioka, Y. Doi, Macromolecules 1990, 23, 1933.
- (1990) Macromolecules , vol.23 , pp. 1933
- Kunioka, M.¹ Doi, Y.²

39
- 0003918387
- nd edition, Academic Press, New York
- nd edition, Academic Press, New York 1997, p. 793.
- (1997) Thermal Characterization of Polymeric Materials , pp. 793
- Turi, E.A.¹

40
- 0003699264
- nd edition, CRC Press, New York
- nd edition, CRC Press, New York 1999, p. 85.
- (1999) Dynamic Mechanical Analysis: A Practical Introduction , pp. 85
- Menard, K.P.¹

41
- 0032753430
- A. K. Rana, B. C. Mitra, A. N. Banerjeer, J. Appl. Polym. Sci. 1999, 71, 531.
- (1999) J. Appl. Polym. Sci. , vol.71 , pp. 531
- Rana, A.K.¹ Mitra, B.C.² Banerjeer, A.N.³

42
- 80051632801
- ASTM D4092-07, Standard Terminology for Plastics: Dynamic Mechanical Properties
- ASTM D4092-07, Standard Terminology for Plastics: Dynamic Mechanical Properties.

43
- 80051639765
- ASTM D 648-07, Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in Edgewise Position
- ASTM D 648-07, Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in Edgewise Position.

44
- 33751530087
- N. Kawamoto, A. Sakai, T. Horikoshi, T. Urushihara, E. Tobita, J. Appl. Polym. Sci. 2007, 103, 244.
- (2007) J. Appl. Polym. Sci. , vol.103 , pp. 244
- Kawamoto, N.¹ Sakai, A.² Horikoshi, T.³ Urushihara, T.⁴ Tobita, E.⁵

* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.