Nanocolumnar structured porous Cu-Sn thin film as anode material for lithium-ion batteries

ACS Applied Materials and Interfaces

Volumn 6, Issue 14, 2014, Pages 10877-10885

  Polat, Deniz B ^a   Lu, Jun ^b   Abouimrane, Ali ^b   Keles, Ozgul ^a   Amine, Khalil ^b,c  

^a ISTANBUL TECHNICAL UNIVERSITY   (Turkey)

^b ARGONNE NATIONAL LABORATORY   (United States)

^c KING ABDULAZIZ UNIVERSITY   (Saudi Arabia)

Author keywords

anode; electron beam; inclined nanocolum; lithium ion battery; oblique angle deposition; porous thin film

Indexed keywords

ANODES; ATOMIC FORCE MICROSCOPY; DEPOSITION; ELECTRON BEAMS; LITHIUM BATTERIES; LITHIUM COMPOUNDS; THICK FILMS; THIN FILMS; TIN; X RAY DIFFRACTION; X RAY PHOTOELECTRON SPECTROSCOPY;

ELECTROCHEMICAL MEASUREMENTS; ELECTRON BEAM CO-EVAPORATION; INCLINED NANOCOLUM; LITHIUM-ION BATTERY; OBLIQUE-ANGLE DEPOSITION; POROUS THIN FILMS; STRUCTURAL AND MORPHOLOGICAL PROPERTIES; THIN FILM X-RAY DIFFRACTIONS;

COPPER;

EID: 84905052038     PISSN: 19448244     EISSN: 19448252     Source Type: Journal    
DOI: 10.1021/am405994b     Document Type: Review

References (36)

1. Lee, K. H. Si Nanowires for an Anode Material of Li Batteries. Ph.D. Thesis, Pohang University, Korea, 2007.
2. Wachtler, M.; Besenhard, J. O. Tin and Tin-Based Intermetallics as New Anode Materials for Lithium-Ion Cells J. Power Sources 2001, 94, 189-193
3. Besenhard, J. O.; Yang, J.; Winter, M. Will Advanced Lithium-Alloy Anodes Have a Chance in Lithium-Ion Batteries ? J. Power Sources 1997, 68, 87-90
4. Kamali, A. R.; Fray, D. Tin-Based Materials as Advanced Anode Materials for Lithium Ion Batteries: a Review J. Rev. Adv. Mater. Sci. 2011, 27, 14-24
5. Lindsay, M. J.; Wang, G. X.; Li, H. K. Al-Based Anode Materials for Li-Ion Batteries J. Power Sources 2003, 119, 84-87
6. Kumar, T. P.; Ramesh, R.; Lin, Y. Y.; Fey, G. T. K. Tin-Filled Carbon Nanotubes as Insertion Anode Materials For Lithium-Ion Batteries Electrochem. Commun. 2004, 6, 520-525
7. 2 and Sn-Based Anodes for Lithium-Ion Batteries. J Energy Environ. Sci. 2009, 2, 818-838
8. Besenhard, J. O.; Komenda, P.; Paxinos, A.; Wudy, E.; Josowicz, M. Binary and Ternary Li-Alloys as Anode Materials in Rechargeable Organic Electrolyte Li-Batteries Solid State Ionics 1986, 18-19, 823-827
9. Besenhard, J. O.; Hess, M.; Komenda, P. Dimensionally Stable Li-Alloy Electrodes for Secondary Batteries Solid State Ionics 1990, 40-41, 525-529
10. Wang, J.; Raistrick, I. D.; Huggins, R. A. Behavior of Some Binary Lithium Alloys as Negative Electrodes in Organic Solvent-Based Electrolytes J. Electrochem. Soc. 1986, 133, 457-460
11. Thacheray, M. M.; Vaughey, J. T.; Johnson, C. S.; Kropf, A. J.; Benedek, R.; Fransson, L. M. L.; Edstrom, K. Structural Considerations of Intermetallic Electrodes for Lithium Batteries J. Power Sources 2003, 113, 124-130
12. Benedek, R.; Thacheray, M. M. Lithium Reactions with Intermetallic- Compound Electrodes J. Power Sources 2002, 110, 406-411
13. Wang, F.; Zhao, M.; Song, X. Influence of The Preparation Conditions on the Morphology and Electrochemical Performance of Nano-Sized Cu-Sn Alloy Anodes J. Alloys Compd. 2007, 439, 249-253
14. 5 (0 < x < 13): An Intermetallic Insertion Electrode for Rechargeable Lithium Batteries Electrochem. Solid-State Lett. 1999, 2, 307-309
15. 5 and their reaction products Electrochem. Commun. 2004, 8, 816-820
16. Naille, S.; Bousquet, C. M.; Robert, F.; Morato, F.; Lippens, P.-E.; Fourcade, O. Sn-based intermetallic materials: Performances and mechanisms J. Power Sources. 2007, 2, 1091-1094
17. 5 Anodes J. Power Sources 2002, 109, 230-233
18. Xue, L.; Fu, Z.; Yao, Y.; Huang, T.; Yu, A. Three-Dimensional Porous Sn-Cu Alloy Anode for Lithium-Ion Batteries Electrochim. Acta 2010, 55, 7310-7314
19. 5 Thin-Film Anodes J. Electrochem. Soc. 2007, 154, A433-A437
20. Bazin, L.; Mitra, S.; Taberna, P. L.; Poizot, P.; Gressier, M.; Menu, M. J.; Barnabé, A.; Simon, P.; Trascon, J. M. High Rate Capability Pure Sn-Based Nano-Architectured Electrode Assembly for Rechargeable Lithium Batteries J.Power Sources 2009, 188, 578-582
21. 5 Nanowires as the Anode Material for Lithium Ion Batteries J. Power Sources 2012, 199, 341-345
22. Tian, M.; Wang, W.; Lee, S. H.; Lee, Y. C.; Yang, R. Enhancing Ni-Sn Nanowire Lithium-Ion Anode Performance by Tailoring Active/Inactive Material Interfaces J. Power Sources 2011, 196, 10207-10212
23. Karabacak, T.; Wang, G. C.; Lu, T. M. Enhanced Layer Coverage of Thin Films by Oblique Angle Deposition Mater. Res. Soc. Symp. Proc. 2005, 859 E, JJ9.5.1-6
24. Hu, R. Z.; Zhang, Y.; Zhu, M. Microstructure and Electrochemical Properties of Electron-Beam Deposited Sn-Cu Thin Film Anodes for Thin Film Lithium Ion Batteries Electrochim. Acta 2008, 53, 3377-3385
25. Pu, W.; He, X.; Ren, J.; Wan, C.; Jiang, C. Electrodeposition of Sn-Cu Alloy Anodes for Lithium Batteries Electrochim. Acta 2005, 50, 4140-4145
26. Jensen, M. O.; Brett, M. J. Porosity Engineering in Glancing Angle Deposition Thin Films Appl. Phys. A: Mater. Sci. Process. 2005, 80, 763-768
27. Robbie, K.; Brett, M. J. Sculptured Thin Films and Glancing Angle Deposition: Growth Mechanics and Applications J. Vac. Sci. Technol. A 1997, 15, 1460-1465
28. Li, J.; Swiatowska, J.; Seyeux, A.; Huang, L. Maurice, V., Sun,S.; Marcus, P. XPS and ToF-SIMS study of Sn-Co Alloy Thin Films as Anode for Lithium Ion Battery J. Power Sources 2010, 24, 8251-8257
29. Chen, Y. C.; Chen, J. M.; Huang, Y. H.; Lee, Y. R.; Shih, H. C. Size Effect Of Tin Oxide Nanoparticles On High Capacity Lithium Battery Anode Materials Surf. Coat. Technol. 2007, 202, 1313-1318
30. Nguyen, C.; Woo, S. W.; Song, S. W. Understanding the Interfacial Processes at Silicon-Copper Electrodes in Ionic Liquid Battery Electrolyte J. Phys. Chem. C 2012, 116, 14764-14771
31. Shieh, D. T.; Yin, J.; Yamamoto, K.; Wada, M.; Tanase, S.; Sakai, T. Surface Characterization on Lithium Insertion/Deinsertion Process for Sputter-Deposited AgSn Thin-Film Electrodes by XPS J. Electrochem. Soc. 2006, 153, A106-112
32. 6 in Propylene Carbonate J. Phys. Chem. C 2013, 117 (48) 25381-25389
33. 5 Composite Thin Film Anodes for Lithium Ion Batteries Prepared by Electron-Beam Evaporation Deposition Electrochim. Acta 2009, 54, 2843-2850
34. Xia, Y.; Sakai, T.; Fujieda, T.; Wada, M.; Yoshinaga, H. Flake Cu-Sn Alloys as Negative Electrode Materials for Rechargeable Lithium Batteries J. Electrochem. Soc. 2001, 5, A471-481
35. Kepler, K. D.; Vaughey, J. T.; Thackeray, M. M. Copper-Tin Anodes for Rechargeable Lithium Batteries: An Exemple of the Matrix effect in an Intermetallic System J.Power Sources 1999, 81-82, 383-387
36. Park, J. W.; Eom, J.; Kwon, H. Charge-Discharge Characteristics of a Layered-Structure Electroplated Cu/Sn anode for Li-Ion Batteries Electrochim. Acta 2010, 5, 1825-1828