Fly ash/polyurethane thin film for the adsorption of volatile organic compounds (VOCs) from air

Fibers and Polymers

Volumn 15, Issue 7, 2014, Pages 1393-1398

  Kim, Han Joo ^a   Pant, Hem Raj ^a,b   Choi, Nag Jung ^a   Kim, Cheol Sang ^a  

^a Chonbuk National University   (South Korea)

^b TRIBHUVAN UNIVERSITY   (Nepal)

Author keywords

Composite film; Fly ash; Polyurethane; Volatile organic compounds

Indexed keywords

ADSORPTION; BENZENE; CHLORINE COMPOUNDS; FILLERS; FLY ASH; GAS CHROMATOGRAPHY; MECHANICAL PROPERTIES; POLYURETHANES; TOLUENE; VOLATILE ORGANIC COMPOUNDS;

ADSORPTION CAPACITIES; ADSORPTION OF VOLATILE ORGANIC COMPOUNDS; ASH PARTICLES; CHARACTERIZATION METHODS; FILLER MATERIALS; POLYURETHANE FILMS; SOLUTION-CASTING METHOD; VOCS ADSORPTIONS;

COMPOSITE FILMS;

EID: 84905050255     PISSN: 12299197     EISSN: None     Source Type: Journal    
DOI: 10.1007/s12221-014-1393-3     Document Type: Article

References (32)

1. K. P. Singh, D. Mohan, G. S. Tandon, and G. S. D. Gupta, Ind. Eng. Chem. Res., 41, 2480 (2002).
2. M. Ahmaruzzaman, Energ. Fuel., 23, 1494 (2009).
3. J. C. Chai, K. Onitsuk, and S. Hayashi, J. Hazard. Mater., 166, 67 (2009).
4. C. Alkan, M. Arslan, C. Mehmet, M. Kaya, and M. Aksoy, Resour. Conserv. Recy., 13, 147 (1995).
5. A. Telesca, M. Marroccoli, D. Calabrese, G. L. Valenti, and F. Montagnaro, Waste Manage., 33, 628 (2013).
6. T. Cicek and M. Tanr verdi, Constr. Build. Mater., 21, 1295 (2007).
7. B. Cetin, A. H. Aydilek, and Y. Guney, Resour. Conserv. Recy., 54, 878 (2010).
8. M. Nascimento, P. S. M. Soares, and V. P. Souza, Fuel, 88, 1714 (2009).
9. S. V. Vassilev and C. G. Vassileva, Fuel, 86, 1490 (2007).
10. V. Viswanathan, T. Laha, K. Balani, A. Agarwal, and S. Seal, Mat. Sci. Eng. R., 54, 121 (2006).
11. G. Kickelbick, Prog. Polym. Sci., 28, 83 (2003).
12. J. Jordan, K. I. Jacob, R. Tannenbaum, M. A. Sharaf, and I. Jasiuk, Mat. Sci. Eng. A-Struct., 393, 1 (2005).
13. H. Pant, B. Pant, C. Park, H. Kim, D. Lee, L. Tijing, B. Hwang, H. Kim, and C. Kim, Fiber. Polym., 14, 970 (2013).
14. M. Lee, T. Lee, and W. Park, Fiber. Polym., 14, 1271 (2013).
15. M. Zanetti, S. Lomakin, and G. Camino, Macromol. Mater. Eng., 279, 1 (2000).
16. T. Lindgren and D. Norback, Indoor Air, 12, 263 (2002).
17. T. K. Poddar, S. Majumdar, and K. K. Sirkar, J. Membrane Sci., 120, 221 (1996).
18. B. Giordan, Noise Health, 4, 25 (2002).
19. S. J. Garcia and J. Suay, Corros. Sci., 49, 3256 (2007).
20. Z. W. Wicks, D. A. Wicks, and J. W. Rosthauser, Prog. Org. Coat., 44, 161 (2002).
21. K. Jindal, D. Bhattacharya, L. F. Francis, A. V. McCormick, L. T. Germinario, and C. Williams, Prog. Org. Coat., 67, 296 (2010).
22. K. Nagata, S. Kodama, H. Kawasaki, S. Deki, and M. Mizuhata, J. Appl. Polym. Sci., 56, 1313 (1995).
23. D. Y. Godovski, Adv. Polym. Sci., 119, 79 (1995).
24. E. Scholten, L. Bromberg, G. C. Rutledge, and T. A. Hatton, ACS Appl. Mater. Interf., 3, 3902 (2011).
25. J. P. Hu, X. F. Wang, B. Ding, J. Y. Lin, J. Y. Yu, and G. Sun, Macromol. Rapid Comm., 32, 1729 (2011).
26. Y. J. Chung, S. K. Lee, S. H. Han, C. Zhao, M. K. Kim, S. C. Park, and J. K. Park, Int. J. Urol., 17, 944 (2010).
27. H. J. Kim, H. R. Pant, N. J. Choi, and C. S. Kim, Chem. Eng. J., 230, 244 (2013).
28. P. Roach, N. J. Shirtcliffe, and M. I. Newton, Soft Matter, 4, 224 (2008).
29. L. D. Tijing, C. H. Park, W. L. Choi, M. T. G. Ruelo, A. Amarjargal, H. R. Pant, I. T. Im, and C. S. Kim, Compos. Part B-Eng., 44, 613 (2013).
30. Q. Li, J. Pang, B. Wang, D. Tao, X. Xu, L. Sun, and J. Zhai, Adv. Power Technol., 24, 288 (2013).
31. J. Volter, J. Catal., 3, 297 (1964).
32. C. Minot and P. Gallezot, J. Catal., 123, 341 (1990).