A multi-objective surrogate-based optimization of the crashworthiness of a hybrid impact absorber

International Journal of Mechanical Sciences

Volumn 88, Issue , 2014, Pages 46-54

  Costas, M ^a   Diaz J ^a   Romera, L ^a   Hernandez S ^a  

^a UNIVERSITY OF A CORUÑA   (Spain)

Author keywords

Composites; Crashworthiness; Hybrid parts; Multi objective; Optimization; Surrogate methods

Indexed keywords

COMPOSITE MATERIALS; CRASHWORTHINESS; OPTIMIZATION; STRAIN RATE;

HYBRID PARTS; MULTI OBJECTIVE; MULTI-OBJECTIVE OPTIMIZATION TECHNIQUES; MULTIVARIATE ADAPTIVE REGRESSION SPLINES; SENSITIVE PROPERTIES; SPECIFIC ENERGY ABSORPTION; SURROGATE METHODS; SURROGATE-BASED OPTIMIZATION; IMPACT ABSORBERS;

MULTIOBJECTIVE OPTIMIZATION; COMPOSITE MATERIALS;

COMPOSITES; FINITE ELEMENT ANALYSIS; OPTIMIZATION; PROBLEM SOLVING; REGRESSION ANALYSIS;

EID: 84905013260     PISSN: 00207403     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijmecsci.2014.07.002     Document Type: Article

References (41)

1. J.M. Alexander An approximate analysis of the collapse of thin cylindrical shells under axial loading Q J Mech Appl Math 13 1 1960 10 15
2. D. Kecman Bending collapse of rectangular and square section tubes Int J Mech Sci 25 9-10 1983 623 636 (Pubitemid 15540266)
3. K.R.F. Andrews, G.L. England, and E. Ghani Classification of the axial collapse of cylindrical tubes under quasi-static loading Int J Mech Sci 25 9-10 1983 687 696 (Pubitemid 15540262)
4. W. Abramowicz, and N. Jones Dynamic axial crushing of square tubes Int J Impact Eng 2 2 1984 179 208 (Pubitemid 14668662)
5. W. Abramowicz, and N. Jones Dynamic axial crushing of circular tubes Int J Impact Eng 2 3 1984 263 281 (Pubitemid 15465215)
6. W. Abramowicz, and N. Jones Dynamic progressive buckling of circular and square tubes Int J Impact Eng 4 4 1986 243 270 (Pubitemid 17567023)
7. M.D. White, and N. Jones Experimental quasi-static axial crushing of top-hat and double-hat thin-walled sections Int J Mech Sci 41 2 1999 179 208
8. M.D. White, N. Jones, and W. Abramowicz A theoretical analysis for the quasi-static axial crushing of top-hat and double-hat thin-walled sections Int J Mech Sci 41 2 1999 209 233
9. A.G. Mamalis, D.E. Manolakos, G.A. Demosthenous, and M.B. Ioannidis The static and dynamic axial collapse of fibreglass composite automotive frame rails Compos Struct 34 1 1996 77 90 (Pubitemid 126398220)
10. Starbuck JM, Jacob GC, Dillard DA, Pohlit DJ. Crashworthiness of adhesively bonded composite structures and their strain-rate sensitivities. In: Proceedings of the 2006 SEM annual conference and exposition on experimental and applied mechanics 2006, vol. 4; 2006. p. 1808-19. (Pubitemid 44627199)
11. K.C. Shin, J.J. Lee, K.H. Kim, M.C. Song, and J.S. Huh Axial crush and bending collapse of an aluminum/GFRP hybrid square tube and its energy absorption capability Compos Struct 57 1-4 2002 279 287
12. M. Stamenović, S. Putić, M. Zrilić, J. Milović, and L.J. Pavlović-Krstić Specific energy absorption capacity of glass-polyester composite tubes under static compressive loading Metalurgija 50 3 2011 197 200
13. S.R. Reid, and T.Y. Reddy Axial crushing of foam-filled tapered sheet metal tubes Int J Mech Sci 28 10 1986 643 656 (Pubitemid 17516827)
14. S.R. Reid, T.Y. Reddy, and M.D. Gray Static and dynamic axial crushing of foam-filled sheet metal tubes Int J Mech Sci 28 5 1986 295 322 (Pubitemid 16633488)
15. A.G. Hanssen, M. Langseth, and O.S. Hopperstad Static and dynamic crushing of circular aluminium extrusions with aluminium foam filler Int J Mech Sci 24 4 2000 475 507 (Pubitemid 30567340)
16. A.G. Hanssen, M. Langseth, and O.S. Hopperstad Static and dynamic crushing of square aluminium extrusions with aluminium foam filler Int J Mech Sci 24 4 2000 347 383 (Pubitemid 30555610)
17. W. Chen, and T. Wierzbicki Relative merits of single-cell, multi-cell and foam-filled thin-walled structures in energy absorption Thin-Walled Struct 39 4 2001 287 306 (Pubitemid 32272126)
18. K. Yamazaki, and J. Han Maximization of the crushing energy absorption of tubes Struct Optim 16 1 1998 37 46 (Pubitemid 128647649)
19. P.O. Marklund, and L. Nilsson Optimization of a car body component subjected to side impact Struct Multidiscip Optim 21 5 2001 383 392 (Pubitemid 32694087)
20. J. Sobieszczanski-Sobieski, S. Kodiyalam, and R.Y. Yang Optimization of car body under constraints of noise, vibration, and harshness (NVH), and crash Struct Multidiscip Optim 22 4 2001 295 306 (Pubitemid 33128226)
21. T. Jansson, L. Nilsson, and M. Redhe Using surrogate models and response surfaces in structural optimization - with application to crashworthiness design and sheet metal forming Struct Multidiscip Optim 25 2 2003 129 140
22. S. Hou, Q. Li, S. Long, X. Yang, and W. Li Design optimization of regular hexagonal thin-walled columns with crashworthiness criteria Finite Elem Anal Des 43 6-7 2007 555 565 (Pubitemid 46435743)
23. S. Hou, Q. Li, S. Long, X. Yang, and W. Li Crashworthiness design for foam filled thin-wall structures Mater Des 30 6 2009 2024 2032
24. E. Acar, M.A. Guler, B. Gereker, M.E. Cerit, and B. Bayram Multi-objective crashworthiness optimization of tapered thin-walled tubes with axisymmetric indentations Thin-Walled Struct 49 1 2011 94 105
25. S. Hou, X. Han, G. Sun, S. Long, W. Li, and X. Yang et al. Multiobjective optimization for tapered circular tubes Thin-Walled Struct 49 7 2011 855 863
26. X. Song, G. Sun, G. Li, W. Gao, and Q. Li Crashworthiness optimization of foam-filled tapered thin-walled structure using multiple surrogate models Struct Multidiscip Optim 47 2 2013 221 231
27. X. Gu, G. Sun, G. Li, L. Mao, and Q. Li A comparative study on multiobjective reliable and robust optimization for crashworthiness design of vehicle structure Struct Multidiscip Optim 2013 1 16
28. M. Kiani, I. Gandikota, A. Parrish, K. Motoyama, and M. Rais-Rohani Surrogate-based optimisation of automotive structures under multiple crash and vibration design criteria Int J Crashworthiness 18 5 2013 473 482
29. SAE Standard. J211: instrumentation for impact test.
30. M. Huang Vehicle crash mechanics 2002 CRC Press Boca Raton, USA
31. M. McKay, R. Beckman, and W. Conover A comparison of three methods for selecting values of input variables in the analysis of output from a computer code Technometrics 21 2 1979 239 245 (Pubitemid 9452235)
32. J.H. Friedman Multivariate adaptive regression splines Ann Stat 19 1991 1 141
33. ABAQUS 6.12 Documentation. Dassault Systèmes; 2012.
34. Adams B, Bauman L, Bohnhoff W, Dalbey K, Ebeida M, Eddy J, et al., DAKOTA, a multilevel parallel object-oriented framework for design optimization, parameter estimation, uncertainty quantification, and sensitivity analysis: version 5.3.1 user's manual. Sandia National Laboratories; December 2009 [updated April 2013].
35. M. Costas, J. Díaz, L.E. Romera, S. Hernández, and A. Tielas Static and dynamic axial crushing analysis of car frontal impact hybrid absorbers Int J Impact Eng 62 0 2013 166 181
36. Costas M, Díaz J, Romera LE, Hernández S, Ledo R. Influence of welded joints on the crashworthiness response of hybrid structural elements. SAE technical papers, vol. 2; 2013.
37. Cook GR, Johson WH. A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures. In: Proceedings of seventh international symposium on Ballistics; 1983.
38. Seidt JD. EOD material characterization, supplemental reports: constitutive and fracture models for ASTM A36 hot rolled steel. Battelle technical report prepared for the Naval Explosive Ordnance Disposal Technology Division, Columbus, Ohio; November 2005.
39. Y. Xiang, Q. Wang, Z. Fan, and H. Fang Optimal crashworthiness design of a spot-welded thin-walled hat section Finite Elem Anal Des 42 2006 846 855
40. BASF. Ultramid (R) A3WG10 BK00564 Polyamide 66. Product information sheet; July 2012.
41. European New Car Assessment Programme (Euro NCAP). Frontal impact testing protocol, version 6.0; August 2012.