Development of an equation to model electrical conductivity of polymer-based carbon nanocomposites

ECS Journal of Solid State Science and Technology

Volumn 3, Issue 6, 2014, Pages

  Taherian, Reza ^a  

^a SHAHROOD UNIVERSITY OF TECHNOLOGY   (Iran)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84904737131     PISSN: 21628769     EISSN: 21628777     Source Type: Journal    
DOI: 10.1149/2.023406jss     Document Type: Article

References (83)

1. R. L. B. Carter, development and modeling of electrically conductive reins for fuel cell bipolar plate applications, in Chemical Engineering. Michigan, Chemical Engineering; 2008.
2. J. M. Wernik and S. A. Meguid, Applied Mechanics Reviews, 63, 50801 (2010).
3. C. Lu and Y. W. Mai, J Mater Sci, 43, 6012 (2008).
4. D. Hull and T. W. Clyne, An Introduction to Composite Materials. 2 edn: Cambridge University Press; 1996.
5. J. Kovacs, B. S. Velagala, K. Schulte, and W. Bauhofer, Compos Sci Technol, 67, 922 (2007).
6. N. Hu, Z.Masuda, and H. Fukunaga, Prediction of Electrical Conductivity of Polymer Filled by Carbon Nanotubes. In Proceedings of the 16th International Conference on Composite Materials; Kyoto, Japan 2007.
7. J. Li, P. C. Ma, W. S. Chou, C. K. To, B. Z. Tang, and J. K. Kim, Adv Funct Mater, 17, 3207 (2007).
8. C. A. Martin, J. K. W. Sandler, M. S. P. Shaffer, M. K. Schwarz, W. Bauhofer, K. Schulte, and A. H. Windle, Compos SciTechnol, 64, 2309 (2004).
9. R. Bhatia, V. Prasad, and M. Reghu, Electrical Percolation Studies of Polystyrene- Multi Wall Carbon Nanotubes Composites. In AIP Conf Proc 2009: 402-408.
10. M. L. Clingerman, J. A. King, K. H. Schulz, and J. D. Meyers, Journal of Applied Polymer Science, 83, 1341 (2002).
11. D. Zhao, Q. Lei, C. Qin, and X. Bai, Pigment Resin Techno, 35, 341 (2006).
12. J. Tiusanen, D. Vlasveld, and J. Vuorinen, Composites Science and Technology, 72, 1741 (2012).
13. N. Grossiord, J. Loos, L. L. Van, M. Maugey, C. Zakri, and C. Koninget al., Adv Funct Mater, 18, 3226 (2008).
14. I. Alig, P. Pötschke, D. Lellinger, T. Skipa, and S. Pegelet al. Polymer, 53, 4 (2012).
15. W. Bauhofer and J. Z. Kovacs, Compos Sci Technol, 69, 1486 (2009).
16. A. E. Eken, E. J. Tozzi, D. J. Klingenberg, and W. Bauhofer, Polymer, 52, 5178 (2011).
17. T. Skipa, D. Lellinger, W. Böhm, M. Saphiannikova, and I. Alig, Polymer, 51, 201 (2010).
18. I. Alig, D. Lellinger, M. Engel, T. Skipa, and P. Pötschke, Polymer, 49, 1902 (2008).
19. J. Y. Yi and G. M. Choi, J Electroceram, 3, 361 (1999).
20. F. Y. Castillo, R. Socher, B. Krause, R. Headrick, B. P. Grady, and R. Prada-Silvyet al., Polymer, 52, 3835 (2011).
21. S. White, B. Di Donna, M. Mu, T. Lubensky, and K. Winey, Phys Rev B, 79, 24301 (2009).
22. S. Bose, R. A. Khare, and P. Moldenaers, Polymer, 51, 975 (2010).
23. Y. Pan, H. K. F. Cheng, L. Li, S. H. Chan, J. Zhao, and Y. K. Juay, J Polym Sci Part B: Polym Phys, 48, 2238 (2010).
24. H. Kim, M.-S. Choi, J. Joo, S. Cho, and H. Yoon, Phys Rev B, 74, 54202 (2006).
25. K. Y. Yan, Q. Z. Xue, Q. B. Zheng, and L. Z. Hao, Nanotechnology, 18, 255705 (2007).
26. I. Alig, P. Pötschke, D. Lellinger, T. Skipa, S. Pegel, G. R. Kasaliwal, and T. Villmow, Polymer, 53, 4 (2012).
27. F. Lux, Journal of Materials Science, 28, 285 (1993).
28. S. Kirkpatrick, Reviews of modern physics, 45, 574 (1973).
29. R. Zallen, The Physics of Amorphous Solids, The Percolation Model. Newyork: John Wiley & Sons; 1983.
30. D. S. McLachlan, M. Blaszkiewicz, and R. E. Newnham, Journal of the American Ceramic Society, 73, 2187 (1990).
31. E. P. Mamunya, V. V. Davidenko, and E. V. Lebedev, Composite Interfaces, 4, 169 (1997).
32. E. P. Mamunya, V. Davidenko, and E. V. Lebedev, Dop Akad Nauk Ukr RSR, 5, 124 (1991).
33. Debdatta Ratna, Handbook of Thermoset Resins. iSmithers; 2009.
34. R. Taherian, A. Nozad, and M. J. Hadianfard, Materials and Design, 32, 3883 (2011).
35. A. Akturk and N. Goldsman, Journal of Applied Physics, 103, 53702 (2008).
36. X. Lu and Z. Chen, Chemical Reviews, 105, 3643 (2005).
37. S. Hong and S. Myung, Nature Nanotechnology, 2, 207 (2007).
38. M. L. Clingerman, Development and modeling of electrically conductive composite materials. Michigan technological university, Chemical engineering; 1998.
39. T. Kuilla, S. Bhadra, D. Yao, N. H. Kim, S. Bose, and J. H. Lee, Progress in Polymer Science, 35, 1350 (2010).
40. I. Alig, T. Skipa, D. Lellinger, M. Bierdel, and H. Meyer, Physica Status Solidi B-Basic Solid State Physics, 245, 2264 (2008).
41. R. Schueler, J. Petermann, K. Schulte, and H. P.Wentzel, Journal of Applied Polymer Science, 63, 1741 (1997).
42. J. K. W. Sandler, J. E. Kirk, I. A. Kinloch, M. S. P. Shaffer, and A. H. Windle, Polymer, 44, 5893 (2003).
43. J. F. Gao, Z. M. Li, Q. J. Meng, and Q. Yang, Mater Lett, 62, 3530 (2008).
44. B. P. Grady, Macromol Rapid Commun, 31, 247 (2010).
45. X. Jing, W. Zhao, and L. Lan, J Mater Sci Lett, 19, 377 (2000).
46. J. Aneli, G. Zaikov, and O. Mukbaniani, Molecular Crystals and Liquid Crystals, 554, 167 (2012).
47. P. K. Pramanik, D. Khastgir, and T. N. Saha, Composites Part A: Applied Science and Manufacturing, 23, 183 (1991).
48. M. H. Al-Saleh and U. Sundararaj, Carbon, 47, 2 (2009).
49. R. Taipalus, T. Harmia, M. Q. Zhang, and K. Friedrich, Composites Science and Technology, 61, 801 (2001).
50. P. Tsotra and K. Friedrich, Composites: Part A, 34, 75 (2003).
51. N. J. S. Sohi, S. Bhadra, and D. Khastgir, Carbon, 49, 1349 (2011).
52. Y. F. Buys, T. Aoyama, S. Akasaka, S. Asai, and M. Sumita, Composites Science and Technology, 70, 200 (2010).
53. I. D. Rosca and S. V. Hoa, Carbon, 47, 1958 (2009).
54. !!! INVALID CITATION !!!
55. M. Wu and L. Shaw, J Appl Polym Sci, 99, 477 (2006).
56. M. Wu, J Power Sources, 136, 37 (2004).
57. G. Kasaliwal, A. Göldel, and P. Pötschke, J Appl Polym Sci, 112, 3494 (2009).
58. H. B. E. N. Daly, K. T. Nguyen, B. Sanschagrin, and K. C. Cole, Structure, 2, 59 (1998).
59. C. S. Li, C. F. Hung, and Y. K. Shen, J Polym Res, 1, 163 (1994).
60. H. Dai, E. W. Wong, and C. M. Lieber, Science, 272, 523 (1996).
61. M. B. Nardelli, J. L. Fattebert, D. Orlikowski, C. Roland, Q. Zhao, and J. Bernholc, Carbon, 38, 1703 (2000).
62. Y. F. Hsiou, C. Chen, C. H. Chan, L. Stobinski, and Y. J. Yang, Jpn J Appl Phys, Part 1, 44, 4245 (2005).
63. P. M. Ajayan, O. Stephan, C. Colliex, and D. Trauth, Science, 265, 1212 (1994).
64. H. Ajiki and T. Ando, J Phys Soc Jpn, 62, 2470 (1993).
65. J. P. Lu, Phys Rev Lett, 74, 1123 (1995).
66. H. Ajiki and T. Ando, J Phys Soc Jpn, 64, 4382 (1995).
67. W. Yi and Q. Yang, Appl Phys A: Mater Sci Process, 98, 659 (2010).
68. S. S. Rahatekar, M. Hamm, M. S. P. Shaffer, and J. A. Elliott, J Chem Phys, 123, 134702 (2005).
69. F. Du, J. Fischer, and K. Winey, Phys Rev B, 72, 1 (2005).
70. A. Behnam, J. Guo, and A. Ural, J Appl Phys, 102, 44313 (2007).
71. T. Villmow, S. Pegel, P. Potschke, and U. Wagenknecht, Compos Sci Technol, 68, 777 (2008).
72. K. Enomoto, T. Yasuhara, N. Ohtake, and K. Kato, JSME Int J Ser A, 46, 353 (2003).
73. R. Dweiri and J. Sahari, Journal of Power Sources, 171, 424 (2007).
74. J. M. Keith, J. A. King, and R. L. Barton, Journal of Applied Polymer Science, 102, 3293 (2006).
75. T. A. Ezquerra, M. T. Connor, S. Roy, M. Kulescza, J. F. Nascimento, and F. J. B. Calleja, Composites Science and Technology, 61, 903 (2001).
76. S. J. Kang, D. O. Kim, J. H. Lee, P. C. Lee, M. H. Lee, Y. Lee, J. Y. Lee, H. R. Choi, J. H. Lee, and Y. S. Oh, Journal of Power Sources, 195, 3794 (2010).
77. W. Thongruang, R. J. Spontak, and C. M. Balik, polymer, 43, 2279 (2002).
78. F. Dalmas, R.Dendievel, L. Chazeau, J. Y. Cavaillé, and C.Gauthier, Acta Materialia, 54, 2923 (2006).
79. S. Chem, Determining Critical Surface Tension of Solid Substrates. Determining Critical Surface Tension of Solid Substrates; 2007.
80. R. Sengupta,M. Bhattacharya, S. Bandyopadhyay, and A. K. Bhowmick, Prog Polym Sci, 36, 638 (2011).
81. R.Taherian,M. J.Hadianfard, and A. N. Golikand, ECS Journal of Solid State Science and Technology, 1, 1 (2012).
82. T. Kuilla, S. Bhadra, D. Yao, N. H. Kim, S. Bose, and J. H. Lee, Prog Polym Sci, 35, 1350 (2010).
83. B. Chen, K. Wu, and W. Yao, Cement and Concrete Composites, 26, 291 (2004).