HF test current injection based self-sensing control of PMSM for low and zero speed range using Two-Degree-of-Freedom current control

2014 IEEE 5th International Symposium on Sensorless Control for Electrical Drives, SLED 2014

Volumn , Issue , 2014, Pages

  Seilmeier, Markus ^a   Ebersberger, Sebastian ^a   Piepenbreier, Bernhard ^a  

^a UNIVERSITY OF ERLANGEN NUREMBERG   (Germany)

Author keywords

permanent magnet motors; saliency; sensorless control; test current injection

Indexed keywords

DEGREES OF FREEDOM (MECHANICS); ELECTRIC CURRENT CONTROL; INDUCTANCE;

CURRENT INJECTIONS; MODEL-BASED CONTROL SCHEMES; PERMANENT MAGNET MOTOR; POSITION ERROR SIGNALS; SALIENCY; SALIENCY BASED SENSORLESS CONTROL; SENSOR LESS CONTROL; TWO-DEGREE-OF-FREEDOM CONTROL;

TESTING;

EID: 84904497803     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/SLED.2014.6844962     Document Type: Conference Paper

References (32)

1. D. Zaltni, M. N. Abdelkrim, M. Ghanes, and J. P. Barbot, "Observability analysis of pmsm," in Internation Conference on Signals, Circuits and Systems, 2009.
2. R. Bojoi, M. Pastorelli, J. Bottomley, and P. Giangrande, "Sensorless control of pm motor drives - a technology status review," in IEEE Workshop on Electrical Machines Design Control and Diagnosis (WEMDCD), 2013.
3. M. Linke, R. Kennel, and J. Holtz, "Sensorless speed and position control of synchronous machines using alternating carrier injection," in Electric Machines and Drives Conference, 2003. IEMDC'03., 2003.
4. J. Holtz, "Acquisition of position error and magnet polarity for sensorless control of pm synchronous machines," in IEEE Transactions on Industry Appliactions, 2008.
5. P. L. Jansen and R. D. Lorenz, "Transducerless position and velocity estimation in induction and salient ac machines," in IEEE Transactions on Industry Applications, 1995.
6. S. Kim and S.-K. Sul, "High performance position sensorless control using rotating voltage signal injection in IPMSM," in Proceedings of the 14th European Conference on : Power Electronics and Applications (EPE 2011), 2011, pp. 1-10.
7. S. C. Yang and R. D. Lorenz, "Comparison of resistance-based and inductance-based self-sensing control for surface permanent magnet machine using high frequency signal injection," in 2011 IEEE Energy Conversion Congress and Exposition. IEEE, 2011, pp. 2701-2708.
8. F. Poltschak and W. Amrhein, "Influence of winding layout of pmsm on inductance and its impact on suitability for sensorless vector control," in International Symposium on Power Electronics, Electrical Drives, Automation and Motion, 2010.
9. J. Graus, A. Boehm, and I. Hahn, "Influence of stator saturation on the differential inductances of PM-synchronous machines with concentrated winding," in Third Symposium on Sensorless Control for Electrical Drives. IEEE, 2012.
10. T. Frenzke, "Impacts of cross-saturation on sensorless control of surface permanent magnet synchronous motors," in 2005 European Conference on Power Electronics and Applications. IEEE, 2005.
11. D. Reigosa, P. Garcia, D. Raca, F. Briz, and R. D. Lorenz, "Measurement and Adaptive Decoupling of Cross-Saturation Effects and Secondary Saliencies in Sensorless-Controlled IPM Synchronous Machines," in IEEE Industry Applications Annual Meeting, 2007.
12. A. Piippo and J. Luomi, "Inductance harmonics in permanent magnet synchronous motors and reduction of their effects in sensorless control," in Proceedings of the XVII International Conference on Electric Machines (ICEM 2006), 2006.
13. N. Limsuwan, T. Kato, C.-Y. Yu, J. Tamura, D. Reigosa, K. Akatsu, and R. D. Lorenz, "Secondary resistive losses with high-frequency injectionbased self-sensing in IPM machines," in 2011 IEEE Energy Conversion Congress and Exposition. IEEE, 2011, pp. 622-629.
14. D. D. Reigosa, P. Garcia, F. B. D. Raca, and R. D. Lorenz, "Modeling and adaptive decoupling of high-frequency resistance and temperature effects in carrier-based sensorless control of pm synchronous machines," in IEEE Transactions on Industry Applications, Vol. 46, 2010.
15. L. A. S. Ribeiro, M. W. Degner, F. Briz, and R. D. Lorenz, "Comparison of carrier signal voltage and current injection for the estimation of flux angle and rotor position," in IEEE Industry Applications Conference, 1998.
16. S. Ebersberger, M. Seilmeier, and B. Piepenbreier, "Flatness Based Sensorless Control of PMSM using Test Current Signal Injection and Compensation for Differential Cross-Coupling Inductances at Standstill and Low Speed Range," in 4th Symposium on Sensorless Control for Electrical Drives, 2013.
17. M. Seilmeier, S. Arenz, B. Piepenbreier, and I. Hahn, "Model based closed loop control scheme for compensation of harmonic currents in PM-synchronous machines," in SPEEDAM 2010. IEEE, 2010, pp. 1-6.
18. M. Seilmeier, S. Ebersberger, and B. Piepenbreier, "PMSM Model for Sensorless Control Considering Saturation Induced Secondary Saliencies," in 4th Symposium on Sensorless Control for Electrical Drives, 2013.
19. J. Melkebeek and J. Willems, "Reciprocity relations for the mutual inductances between orthogonal axis windings in saturated salient-pole machines," IEEE Transactions on Industry Applications, vol. 26, no. 1, pp. 107-114, 1990.
20. S.-C. Yang and R. D. Lorenz, "Surface permanent magnet synchronous machine self-sensing position estimation at low speed using eddy current reflected asymmetric resistance," in Proceedings of the 14th European Conference on : Power Electronics and Applications (EPE 2011), 2011.
21. M. Seilmeier, S. Ebersberger, and B. Piepenbreier, "Identification of high frequency resistances and inductances for sensorless control of PMSM," in 4th Symposium on Sensorless Control for Electrical Drives, 2013.
22. L. Alberti, N. Bianchi, M. Morandin, and J. Gyselinck, "Finite-element analysis of electrical machines for sensorless drives with signal injection," in Energy Conversion Congress and Exposition (ECCE), 2012 IEEE, 2012, pp. 861-868.
23. P. L. Falb and W. A. Wolovich, "Decoupling in the design and synthesis of multivariable control systems," IEEE Transactions on Automatic Control, vol. AC-12, No. 6, pp. 651-659, 1967.
24. M. Fliess, J. Levine, P. Martin, and P. Rouchon, "Flatness and defect of non-linear systems: introductory theory and examples," Internation Journal of Control, vol. 61, Issue 6, pp. 1327-1361, 1995.
25. B. A. Francis and W. M. Wonham, "The internal model principle for linear multivariable regulators," Applied Mathematics & Optimization, vol. 2, no. 2, pp. 170-194, 1975.
26. L. Ribeiro, M. Degner, F. Briz, and R. Lorenz, "Comparison of carrier signal voltage and current injection for the estimation of flux angle or rotor position," in Conference Record of 1998 IEEE Industry Applications Conference. Thirty-Third IAS Annual Meeting (Cat. No.98CH36242). IEEE, 1998, pp. 452-459.
27. M. Liserre, R. Teodorescu, and F. Blaabjerg, "Multiple harmonics control for three-phase grid converter systems with the use of PI-RES current controller in a rotating frame," IEEE Transactions on Power Electronics, vol. 21, no. 3, pp. 836-841, 2006.
28. L. Limongi, R. Bojoi, G. Griva, and A. Tenconi, "Digital current-control schemes," Industrial Electronics Magazine, IEEE, vol. 3, no. 1, pp. 20- 31, 2009.
29. S. Ebersberger and B. Piepenbreier, "Identification of differential inductances of permanent magnet synchronous machines using test current signal injection," in International Symposium on Power Electronics, Electrical Drives, Automation and Motion, 2012.
30. M. Seilmeier, A. Boehm, I. Hahn, and B. Piepenbreier, "Identification of time-variant high frequency parameters for sensorless control of PMSM using an internal model principle based high frequency current control," in XXth International Conference on Electrical Machines, 2012.
31. M. Seilmeier, S. Ebersberger, and B. Piepenbreier, "PMSM Model for Sensorless Control Considering Saturation Induced Secondary Saliencies," in 4th Symposium on Sensorless Control for Electrical Drives, 2013.
32. M. Seilmeier and B. Piepenbreier, "Identification of steady-state inductances of PMSM using polynomial representations of the flux surfaces," in Industrial Electronics Conference (IECON), Vienna, 2013.