The sliding wear of TiC and Ti(C,N) cermets prepared with a stoichiometric Ni3Al binder

Wear

Volumn 318, Issue 1-2, 2014, Pages 153-167

  Stewart, Tyler L ^a   Plucknett, Kevin P ^a  

^a DALHOUSIE UNIVERSITY   (Canada)

Author keywords

Abrasive wear; Adhesive wear; Focused ion beam microscopy; Scanning electron microscopy; Tribolayer

Indexed keywords

ABRASION; ALUMINUM; BINDERS; DEBRIS; FOCUSED ION BEAMS; NICKEL; SCANNING ELECTRON MICROSCOPY; SINTERING; TITANIUM CARBIDE; TRIBOLOGY; WEAR RESISTANCE; X RAY SPECTROSCOPY;

ADHESIVE WEARS; COUNTER-FACE MATERIALS; ENERGY DISPERSIVE X RAY SPECTROSCOPY; FOCUSED ION BEAM MICROSCOPY; RECIPROCATING SLIDING; TI(C , N)-BASED CERMETS; TRIBO LAYERS; TRIBOLOGICAL BEHAVIOUR;

CERMETS;

EID: 84904489271     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.wear.2014.06.025     Document Type: Article

References (72)

1. Humenik M., Parikh N. Cermets, 1. Fundamental concepts related to microstructure and physical properties of cermet systems. J. Am. Ceram. Soc. 1956, 39:60-63.
2. Ettmayer P., Kolaska H., Lengauer W., Dreyer K. Ti(C,N) cermets - metallurgy and properties. Int. J. Refract. Met. Hard Mater. 1995, 13:343-351.
3. Cardinal S., Malchère A., Garnier V., Fantozzi G. Microstructure and mechanical properties of TiC-TiN based cermets for tools application. Int. J. Refract. Met. Hard Mater. 2009, 27:521-527.
4. Zhang S. Titanium carbonitride-based cermets - processes and properties. Mater. Sci. Eng. A 1993, 163:141-148.
5. Zhang H., Yan J., Zhang X., Tang S. Properties of titanium carbonitride matrix cermets. Int. J. Refract. Met. Hard Mater. 2006, 24:236-239.
6. Russias J., Cardinal S., Aguni Y., Fantozzi G., Bienvenu K., Fontaine J. Influence of titanium nitride addition on the microstructure and mechanical properties of TiC-based cermets. Int. J. Refract. Met. Hard Mater. 2005, 23:358-362.
7. Bolognini S., Feusier G., Mari D., Viatte T., Benoit W. High temperature mechanical behaviour of Ti (C,N)-Mo-Co cermets. Int. J. Refract. Met. Hard Mater. 1998, 16:257-268.
8. Qi F., Kang S. A study on microstructural changes in Ti(CN)-NbC-Ni cermets. Mater. Sci. Eng. A 1998, 251:276-285.
9. Stewart T., Collier R.B., Farhat Z.N., Kipouros G.J., Plucknett K.P. Melt-infiltration processing of titanium carbide-stainless steel cermets. Ceram. Eng. Sci. Proc. 2010, 31:97-104.
10. 3Al cermets. Can. Metall. Q. 2013, 52:69-80.
11. Onuoha C.C., Farhat Z.N., Kipouros G.J., Plucknett K.P. The reciprocating wear behaviour of TiC-304L stainless steel composites prepared by melt infiltration. Wear 2013, 303:321-333.
12. Plucknett K.P., Becher P.F. Processing and microstructure development of titanium carbide-nickel aluminide composites prepared by melt infiltration/sintering (MIS). J. Am. Ceram. Soc. 2001, 84:55-61.
13. 3Al and its alloys. Int. Mater. Rev. 1989, 34:153-184.
14. Deevi S.C., Sikka V.K. Nickel and iron aluminides: an overview on properties, processing, and applications. Intermetallics 1996, 4:357-375.
15. Plucknett K.P., Becher P.F., Waters S.B. Flexure strength of melt-infiltration processed titanium carbide/nickel aluminide composites. J. Am. Ceram. Soc. 1998, 81:1839-1844.
16. Pickens J.R., Gurland J. The fracture toughness of WC-Co alloys measured on single-edge notched beam specimens precracked by electron discharge machining. Mater. Sci. Eng. 1978, 33:135-142.
17. Shetty D.K., Wright I.G., Mincer P.N., Clauer A.H. Indentation fracture of WC-Co cermets. J. Mater. Sci. 1985, 20:1873-1882.
18. Upadhyaya G.S. Cemented Tungsten Carbides: Production, Properties, and Testing 1998, Noves Publications, Westwood, New Jersey, USA.
19. Larsen-Basse J. Effect of composition, microstructure and service conditions on the wear of cemented carbides. J. Met. 1983, 35:35-42.
20. Engqvist H., Axén N., Hogmark S. Resistance of a binderless cemented carbide to abrasion and particle erosion. Tribol. Lett. 1998, 4:251-258.
21. Engqvist H., Botton G.A., Ederyd S., Phaneul M., Fondelius J., Axén N. Wear phenomena on WC-based face seal rings. Int. J. Refract. Met. Hard Mater. 2000, 18:39-46.
22. Montimer B., Lancaster J.K. Extending the life of aerospace dry bearings by the use of hard smooth counterfaces. Wear 1988, 121:289-305.
23. Bonny K., De Baets P., Ost W., Huang S., Vleugels J., Liu W., Lauwers B. Influence of electrical discharge machining on the reciprocating sliding friction and wear response of WC-Co cemented carbides. Int. J. Refract. Met. Hard Mater. 2009, 27:350-359.
24. Bonny K., De Baets P., Quintelier J., Vleugels J., Jiang D., Van der Biest O., Lauwers B., Liu W. Surface finishing: impact on tribological characteristics of WC-Co hardmetals. Tribol. Int. 2009, 43:40-54.
25. 2/VC addition on the dry sliding friction and wear response of WC-Co cemented carbides. Wear 2009, 267:1642-1652.
26. Manoj Kumar B.V., Basu B. Fretting wear properties of TiCN-Ni cermets: influence of load and secondary carbide addition. Metall. Mater. Trans. A 2008, 39A:539-550.
27. Manoj Kumar B.V., Basu B., Kalin M., Vizintin J. Load-dependent transition in the sliding wear properties of TiCN-WC-Ni cermets. J. Am. Ceram. Soc. 2007, 90:153-1540.
28. K.P. Plucknett, T.N. Tiegs, P.F. Becher, Method of Making Ductile Intermetallic-Bonded Ceramic Composites. U.S. Patent #5,905,937, May 1999.
29. Plucknett K.P., Becher P.F., Alexander K.B. In-situ SEM observation of the fracture behaviour of titanium carbide/nickel aluminide composites. J. Microsc. 1997, 185:206-216.
30. Garber R.M., Dickerson C. Maintenance of high strength alloy steel components. Aero Mag. 2003, 22:22-34.
31. Smith B.W. The Boeing 777. Adv. Mater. Processes 2003, 161:41-44.
32. Boyer R.R. Attributes, characteristics, and applications of titanium and its alloys. JOM 2010, 62:35-43.
33. Collier R.B., Plucknett K.P. A comparison of anionic and cationic polyelectrolytes for the aqueous colloidal processing of titanium carbide ceramics. Int. J. Refract. Met. Hard Mater. 2011, 29:298-305.
34. Mendelson M.I. Average grain size in polycrystalline ceramics. J. Am. Ceram. Soc. 1969, 52:443-446.
35. Gurland J., Bardzil P. Relation of strength, composition, and grain size of sintered WC-Co alloys. Trans. AIME, J. Met. 1955, 203:311-315.
36. Nakamura M., Gurland J. The fracture toughness of WC-Co two-phase alloys - A preliminary model. Metall. Mater. Trans. A 1980, 11:141-146.
37. IC of brittle solids by the indentation method with low crack-to-indent ratios. J. Mater. Sci. Lett. 1982, 1:13-16.
38. Lancaster J.K. The influence of substrate hardness on the formation and endurance of molybdenum disulphide films. Wear 1967, 10:103-117.
39. Giannuzzi L.A., Stevie F.A. A review of focused ion beam milling techniques for TEM specimen preparation. Micron 1999, 30:197-204.
40. German R.M. Liquid Phase Sintering 1985, Plenum Publishing Corporation, New York.
41. Dong-Il C., Kim D.-Y., Eun K.-Y. Microstructural evolution during the sintering of TiC-Mo-Ni cermets. J. Am. Ceram. Soc. 1993, 76:2049-2052.
42. Zachrisson J., Rolander U., Andrén H.-O. Development of cermet microstructures during sintering. Metall. Mater. Trans. A 2001, 32:85-94.
43. Gao M., Pan Y., Oliveira F.J., Yang L., Baptista J.L., Vieira J.M. The formation of core-rim structures in Fe40Al/(TiC-TiN-WC) cermets produced by pressureless melt infiltration. Mater. Sci. Eng. A 2004, 371:277-282.
44. Subramanian R., Schneibel J.H. FeAl-TiC cermets - melt infiltration processing and mechanical properties. Mater. Sci. Eng. 1997, A239-240:633-639.
45. Dmitrieva G.P., Razumova N.A., Shurin A.K. Phase equilibrium diagram of the Ni-TiC-HfC system. Sov. Powder Metall. Met. Ceram. 1984, 23:159-162.
46. Engqvist H., Jacobson S., Axén N. A model for the hardness of cemented carbides. Wear 2002, 252:384-393.
47. 1-x). J. Alloys Compd. 2000, 309:L5-L9.
48. Jia K., Fischer T.E. Sliding wear of conventional and nanostructured cemented carbides. Wear 1997, 203:310-318.
49. Sigl L.S., Mataga P., Dalgleish B., McMeeking R.M., Evans A.G. On the toughness of brittle materials reinforced with a ductile phase. Acta Metall. 1988, 36:945-953.
50. Manoj Kumar B.V., Basu B., Vizintin J., Kalin M. Tribochemistry in sliding wear of TiCN-Ni-based cermets. J. Mater. Res. 2008, 23:1214-1227.
51. Monteverde F., Bellosi A. Oxidation behaviour of titanium carbonitride based materials. Corros. Sci. 2002, 44:1967-1982.
52. Yang Q., Xiong W., Li S., Yao Z., Chen X. Early high temperature oxidation behaviour of Ti(C,N)-based cermets in air. Corros. Sci. 2010, 52:3205-3211.
53. Zhang L., Koka R.V. A study on the oxidation and carbon diffusion of TiC in alumina±titanium carbide ceramics using XPS and Raman spectroscopy. Mater. Chem. Phys. 1998, 57:23-32.
54. 3Al) based alloys: Wear properties and case histories. International Symposium on Nickel and Iron Aluminides: Processing, Properties, and Applications 1997, 377-386. ASM International, Materials Park, OH, USA. S.C. Deevi, V.K. Sikka, P.J. Maziasz, R.W. Cahn (Eds.).
55. Archard J.F. Contact and rubbing of flat surfaces. J. Appl. Phys. 1953, 24:981-988.
56. Pirso J., Viljus M., Letunovits S. Sliding wear of TiC-NiMo cermets. Tribol. Int. 2004, 37:817-824.
57. Czichos H., Becker S., Lexow J. International multi-laboratory sliding wear tests with ceramics and steel. Wear 1989, 135:171-191.
58. Enomoto Y., Mizuhara K. Characterisation of wear behaviour of steel and ceramics in the VAMAS round-robin tests. Wear 1993, 162:119-125.
59. Heintze S.D., Barkmeier W.W., Latta M.A., Rousson V. Round robin test: Wear of nine dental restorative materials in six different wear simulators - supplement to the round robin test of 2005. Dental Mater. 2011, 27:e1-e9.
60. Campbell P.Q., Celis J.P., Roos J.R., Van der Biest O. Fretting wear of selected ceramics and cermets. Wear 1994, 174:47-56.
61. Gee M., Gant A. B. Roebuck, Wear mechanisms in abrasion and erosion of WC/Co and related hardmetals. Wear 2007, 263:137-148.
62. Lawn B.R., Wilshaw R. Indentation fracture: principles and applications. J. Mater. Sci. 1975, 10:1049-1081.
63. Lawn B.R. Indentation of ceramics with spheres: a century after Hertz. J. Am. Ceram. Soc. 1998, 81:1977-1994.
64. Hashin Z., Shtrikman S. A variational approach to the theory of the elastic behaviour of multiphase materials. J. Mech. Phys. Solids 1963, 11:127-140.
65. Budiansky B. On the elastic moduli of some heterogeneous materials. J. Mech. Phys. Solids 1965, 13:223-227.
66. Hannink R.H.J., Murray M.J. Elastic moduli measurements of some cubic transition metal carbides and alloyed carbides. J. Mater. Sci. 1974, 9:223-228.
67. 3Al. Rom. J. Phys. 2011, 56:935-951.
68. Dey G. Physical metallurgy of nickel aluminides. Sadhana 2003, 28:247-262.
69. Ibrahim I.A., Mohamed F.A., Lavernia E.J. Particulate reinforced metal matrix composites - a review. J. Mater. Sci. 1991, 26:1137-1156.
70. Sigl L.S., Schmauder S. A finite element study of crack growth in WC-Co. Int. J. Fract. 1998, 36:305-317.
71. Doi H., Fujiwara Y., Miyake K., Oosawa Y. A systematic investigation of elastic moduli of WC-Co alloys. Metall. Mater. Trans. 1970, 1:1417-1425.
72. Bodhak S., Basu B., Venkateswaran T., Jo W., Jung K.-H., Kim D.-Y. Mechanical and fretting wear behaviour of novel (W,Ti)C-Co cermets. J. Am. Ceram. Soc. 2006, 89:1639-1651.