Non-aqueous and crude oil foams;Mousses non aqueuses et mousses pétrolières

Oil and Gas Science and Technology

Volumn 69, Issue 3, 2014, Pages 467-479

  Blázquez, Christian ^a   Emond, Eliane ^a   Schneider, Sophie ^a   Dalmazzone, Christine ^b   Bergeron, Vance ^c  

^a Rhodia   (France)

^b IFP ENERGIES NOUVELLES   (France)

^c UNIVERSITÉ DE LYON   (France)

Author keywords

[No Author keywords available]

Indexed keywords

CHEMICAL ENGINEERING; ENERGY RESOURCES;

AQUEOUS SYSTEM; ENGINEERING PROCESS; FOAM STABILITY; HYDROCARBON FLUIDS; NON-AQUEOUS; NONAQUEOUS MEDIA; SURFACE ACTIVITIES; WATER BASED;

CRUDE OIL;

ADSORPTION; CRUDE OIL; FOAM; SURFACE TENSION;

EID: 84904458822     PISSN: 12944475     EISSN: None     Source Type: Journal    
DOI: 10.2516/ogst/2013186     Document Type: Article

References (79)

1. Vignes-Adler M., Weaire D. (2008) New foams: Fresh challenges and opportunities, Current Opinion in Colloid and Interfaces Science 13, 141-149
2. Cantat I., Cohen-Addad S., Elias F., Graner F., Höhler R., Pitois O., Rouyer F., Saint-Jalmes A. (2010) Les mousses: structure et dynamique, Collection Échelles, Belin, Paris, ISBN 978-2-7011-4284-5
3. Stevenson P. (2012) Foam Engineering: Fundamentals and Applications, John Wiley and Sons, Chichester.
4. Weaire D., Hutzler S. (1999) The physics of Foams, Oxford University Press, New York, ISBN 0-19-851097-7
5. Guillermic R.M., Salonen A., Emile J., Saint-Jalmes A. (2009) Surfactant foams doped with laponite: Unusual behaviour induced by aging and confinement, Soft Matter 5, 4975-4982
6. Goyon J., Bertrand F., Pitois O., Ovarlez G. (2010) Shear Induced Drainage in Foamy Yield-Stress Fluids, Physical Review Letters 104, 12, 128301
7. Exerowa D., Kruglyakov P.M. (1998) Foam and foam films: Theory, Experiment, Application, Möbius D., Miller R. (eds), Elsevier, Amsterdam.
8. Georgieva D., Cagna A., Langevin D. (2009) Link between surface elasticity and foam stability, Soft Matter 5, 2063-2071
9. Langevin D. (2000) Influence of interfacial rheology on foam and emulsion properties, Advances in Colloid and Interface Science 88, 209-222
10. Mittal K.L., Kumar P. (2000) Emulsions, foams and thin films, Marcel Dekker Inc., New York.
11. Prud'homme R.K., Khan S.A. (1996) Foams: Theory, Measurements and Applications, Marcel Dekker Inc., New York.
12. Pugh R.J. (1996) Foaming, foam films, antifoaming and defoaming, Advances in Colloid and Interface Science 64, 67-142
13. Sheludko A. (1967) Thin liquid films, Advances in Colloid and Interface Science 1, 391-403
14. Bergeron V. (2003) Antimousses et agents démoussants -Mécanismes d'action -Mise en oeuvre industrielle, Techniques de l'Ingénieur, Traité génie des procédés J-2-205, J-2-206, J-2-207
15. Beneventi D., Carre B., Gandini A. (2001) Role of surfactant structure on surface and foaming properties, Colloids and Surfaces A: Physicochemical and Engineering Aspects 189, 65-73
16. Hollinger H.B. (1991) Thermodynamics of foam, Journal of Colloid and Interface Science 143, 1, 278-286
17. Schramm L.L. (1994) Foams: Fundamentals and Applications in the Petroleum Industry, American Chemical Society, Washington D.C.
18. Morrison I.D. (1996) Ross's rule: Sydney Ross and the phase diagram, Colloids and Surfaces A: Physicochemical and Engineering Aspects 118, 257-261
19. Morrison I.D., Ross S. (1983) The Equation of State of a Foam, Journal of Colloid and Interface Science 95, 1, 97-101
20. Friberg S.E. (2010) Foams from non-aqueous systems, Current Opinion in Colloid and Interface Science 15, 359-364
21. Sanders P.A. (1970) Stabilization of Aerosol Emulsions and Foams, Journal of the Society of Cosmetic Chemists 21, 377-391
22. Shrestha R.G., Shrestha L.K., Solans C., Gonzalez C., Aramaki K. (2010) Nonaqueous foam with outstanding stability in diglycerol monomyristate/olive oil system, Colloids and Surfaces A: Physicochemical and Engineering Aspects 353, 157-165
23. Shrestha L.K., Shrestha R.G., Solans C., Aramaki K. (2007) Effect of water on foaming properties of diglycerol fatty acid ester-oil system, Langmuir 23, 13, 6918-6926
24. Shrestha L.K., Aramaki K., Kato H., Takase Y., Kunieda H. (2006) Foaming properties of monoglycerol fatty acid ester in nonpolar oil systems, Langmuir 22, 8337-8345
25. Callaghan I.C., McKechnie A.L., Ray J.E., Wainwright J.C. (1985) Identification of crude oil components responsible for foaming, Society of Petroleum Engineers Journal 25, 2, 171-175
26. Mellema M., Benjamins J. (2004) Importance of the Marangoni effect in the foaming of hot oil with phospholipids, Colloids and Surfaces A: Physicochemical and Engineering Aspects 237, 113-118
27. Robb I.D. (1997) Specialist Surfactants, Blackie Academic and Professional, Chapman and Hall, London.
28. Bergeron V., Hanssen J.E., Shoghl F.N. (1997) Thin-film forces in hydrocarbon foam films and their application to gas-blocking foams in enhanced oil recovery, Colloids and Surfaces A: Physicochemical and Engineering Aspects 123-124, 609-622
29. Zaki N.N., Poindexter M.K., Kilpatrick P.K. (2002) Factors contributing to petroleum foaming. 2. Synthetic crude oil systems, Energy and Fuels 16, 711-717
30. Adil I., Maini B.B. (2007) Role of asphaltenes in foamy oil flow, Journal of Canadian Petroleum Technology 46, 4, 18-23
31. Bauget F., Langevin D., Lenormand R. (2001) Dynamic surface properties of asphaltenes and resins at the oil-air interface, Journal of Colloid and Interface Science 239, 501-508
32. Ross S., Nishioka G. (1975) Foaminess of binary and ternary solutions, The Journal of Physical Chemistry 79, 15, 1561-1565
33. Shrestha L.K., Shrestha R.G., Sharma S.C., Aramaki K. (2008) Stabilization of non-aqueous foam with lamellar liquid crystal particle in diglycerol monolaurate/olive oil system, Journal of Colloid and Interface Science 328, 172-179
34. Friberg S.E., Greene B. (1984) A nonaqueous foam with excellent stability, Journal of Colloid and Interface Science 101, 2, 593-595
35. Friberg S.E., Blute E., Stenius P. (1989) Foam stability in a glycerol system, Journal of Colloid and Interface Science 127, 2, 573-582
36. Bikerman J.J. (1973) Foams, Springler-Verlag, Berlin.
37. Binks B.P. (2002) Particles as surfactants - similarities and differences, Current Opinion in Colloid and Interface Science 7, 21-41
38. Binks B.P., Horozov T.S. (2006) Colloidal Particles at Liquid Interfaces, Cambridge University Press, Cambridge, ISBN 978-0-521-84846-6
39. Binks B.P., Rocher A., Kirkland M. (2011) Oil foams stabilised solely by particles, Soft Matter 7, 1800-1808
40. Binks B.P., Davies C.A., Fletcher P.D.I., Sharp E.L. (2010) Non-aqueous foams in lubricating oil systems, Colloids and Surfaces A: Physicochemical and Engineering Aspects 360, 198-204
41. Kichkin G.I. (1966) Foam formation in Lubricating Oils, Chemistry and Technology of Fuels and Oils 2, 4, 272-275
42. Totten G.E., Vestbrook S.R., Shah R.J. (2003) Fuel and Lubricants Handbook: Technology, Properties, Performance, and Testing, ASTM Manual Series: MNL37WCD, ASTM International, West Conshohocken, PA, ISBN 0-8031-2096-6
43. Sepulveda J.J., Falana O.M., Kakadjian S., Morales J.D., Zamora F., Dibiasio M.A., Marshall E., Shirley G. (2008) Oil-Based Foam and Proper Underbalanced-Drilling Practices Improve Drilling Efficiency in a Deep Gulf Coast Well, SPE Annual Technical Conference and Exhibition, SPE 115536-MS, Denver, Colorado, USA, 21-24 Sept.
44. Chin R.W., Inlow H.L., Keja T., Hebert P.B., Bennett J.R., Yin T.C. (1999) Chemical defoamer reduction with new internals in the Mars TLP Separators, SPE Annual Technical Conference and Exhibition, SPE paper 56705, Houston, Texas, 3-6 Oct.
45. Callaghan I.C., Gould C.M., Reid A.J., Seaton D.H. (1985) Crude-oil foaming problems at the Sullom Voe Terminal, Journal of Petroleum Technology 37, 12, 2211-2218
46. Shaban H.I. (1995) A study of foaming and carry-over problems in oil and gas separators, Gas Separation and Purification 9, 2, 81-86
47. Abivin P., Henaut I., Argillier J.-F., Moan M. (2009) Rheological behaviour of foamy oils, Energy and Fuels 23, 1316-1322
48. Abivin P., Henaut I., Chaudemanche C., Argillier J.F., Chinesta F., Moan M. (2009) Dispersed systems in heavy crude oils, Oil and Gas Science and Technology 64, 5, 557-570
49. Arora P., Kovscek A.R. (2001) Mechanistic modelling of solutions gas drive in viscous oils, 2001 SPE International Thermal Operations and heavy oil Symposium, SPE paper 69717, Margarita Island, Venezuela, 12-14 March.
50. Bondino I., McDougall S.R., Hamon G. (2009) Pore-scale modelling of the effect of viscous pressure gradients during heavy oil depletion experiments, Canadian International Petroleum Conference, Paper 2009-187, Calgary, Canada, 16-18 June.
51. Callaghan I.C., Neustadter E.L. (1981) Foaming of crude oils: a study of non-aqueous foam stability, Chemistry and Industry (London) 2, 53-57
52. Huerta M., Otero C., Rico A., Jimenez I., Mirabal M., Rojas G. (1996) Understanding foamy oil mechanisms for heavy oil reservoirs during primary production, SPE Annual Technical Conference and Exhibition, SPE paper 36749, Denver, Colorado, 6-9 Oct.
53. Joseph D.D., Kamp A.M., Bai R. (2002) Modelling foamy oil flow in porous media, International Journal of Multiphase Flow 28, 1659-1686
54. Joseph D.D., Kamp A.M., Ko T., Bai R. (2003) Modelling foamy oil flow in porous media II: Nonlinear relaxation time model of nucleation, International Journal of Multiphase Flow 29, 1489-1502
55. Maini B.B., Busahmin B. (2010) Foamy oil flow and its role in heavy oil production, Porous Media and Its Application in Science, Engineering and Industry, 3rd International Conference, AIP Conferences Proceedings Vol. 1254, pp. 103-108, Montecatini, Italy, 20-25 June.
56. Marcano L., Gutierrez X., Perez B., Martínez E. (2009) Effect of some physicochemical variables on the formation and stability of foam in an oil-air system and their correlation with the formation of foamy crude oil, Latin American and Caribbean Petroleum Engineering Conference, SPE paper 123060, Cartagena de Indias, Colombia, 31 May-3 June.
57. Peng J., Tang G.-Q., Kovscek A.R. (2009) Oil chemistry and its impact on heavy oil solutions gas drive, Journal of Petroleum Science and Engineering 66, 47-59
58. Sheng J.J., Maini B.B., Hayes R.E., Tortike W.S. (1999) A non-equilibrium model to calculate foamy oil properties, Journal of Canadian Petroleum Technology 38, 4, 38-45
59. Sheng J.J., Maini B.B., Hayes R.E., Tortike W.S. (1997) Experimental study of foamy oil stability, Journal of Canadian Petroleum Technology 36, 4, 31-37
60. Wang J., Yuan Y., Zhang L., Wang R. (2009) The influence of viscosity on stability of foamy oil in the process of heavy oil solution gas drive, Journal of Petroleum Science and Engineering 66, 69-74
61. Maini B.B. (2001) Foamy-Oil Flow, Journal of Petroleum Technology 53, 10, 54-64
62. Poindexter M.K., Zaki N.N., Kilpatrick P.K., Marsh S.C., Emmons D.H. (2002) Factors contributing to petroleum foaming. 1, Crude oil systems, Energy and Fuels 16, 700-710
63. George D.S., Hayat O., Kovscek A.R. (2005) A microvisual study of solutions-gas-drive mechanisms in viscous oils, Journal of Petroleum Science and Engineering 46, 101-119
64. Fraga A.K., Rezende D.A., Santos R.F., Mansur C.R.E. (2011) Method to evaluate foaming in petroleum, Brazilian Journal of Petroleum and Gas 5, 1, 25-33
65. Callaghan I.C., Gould C.M., Hamilton R.J., Neustadter E.L. (1983) The relationshipbetween the dilatational rheology and crude oil foam stability. 1, Preliminary studies, Colloids and Surfaces 8, 17-28
66. Sheng J.J., Maini B.B., Hayes R.E., Tortike W.S. (1999) Critical Review of Foamy Oil Flow, Transport in Porous Media 35, 157-187
67. Pacho D., Davies G. (2003) Detection and monitoring of oil foams using raw capacitance data, Industrial and Engineering Chemistry Research 42, 3, 636-645
68. Cohen-Addad S., Höhler R., Pitois O. (2013) Flow in Foams and Flowing Foams, The Annual Review of Fluid Mechanics 45, 241-267
69. Fransen G., Carbajal R., Guevara I. (2009) Foam detection in process units, 2009 SPE Latin American and Caribbean Petroleum Engineering Conference, SPE paper 122236, Cartagena, Colombia, 31 May-3 June.
70. Barigou M. (2001) Foam rupture by mechanical and vibrational methods, Chemical Engineering Technology 24, 659-663
71. Bergeron V., Cooper P., Fischer C., Giermanska-Kahn J., Langevin D., Pouchelon A. (1997) Polydimethylsiloxane (PDMS)-based antifoams, Colloids and Surfaces A: Physicochemical and Engineering Aspects 122, 103-120
72. Colbert J.C. (1981) Foam and Emulsion Control Agents and Processes: Recent Developments, Noyes Data Corporation, Park Ridge, N.J.
73. Karakashev S.L., Grozdanova M.V. (2012) Foams and antifoams, Advances in Colloid and Interface Science 176-177, 1-17
74. Rezende D.A., Bittencourt R.R., Mansur C.R.E. (2011) Evaluation of the efficiency of polyether-based antifoams for crude oil, Journal of Petroleum Science and Engineering 76, 172-177
75. Wylde J.J. (2010) Successful field application of novel, nonsilicone antifoam chemistries for high foaming heavy oil storage tanks in Northern Alberta, SPE Production and Operations 25, 1, 25-30
76. Denkov N.D. (2004) Mechanisms of Foam Destruction by Oil-Based Antifoams, Langmuir 20, 9463-9505
77. Garret P.R. (1992) Defoaming. Theory and Industrial Applications, Surfactant Science Series 45, CRC, Marcel Dekker, New York, ISBN 0-8247-8770-6
78. Hadjiiski A., Tcholakova S., Denkov N.D., Durbut P., Broze G., Mehreteab A. (2001) Effect of Oily Additives on Foamability and Foam Stability. 2, Entry Barriers, Langmuir 17, 7011-7021
79. Luben A.S., Denkov N.D., Surcheva I., Durbut P., Broze G., Mehreteab A. (2001) Effect of Oily Additives on Foama bility and Foam Stability. 1, Role of Interfacial Properties, Langmuir 17, 6999-7010.