Foams from non-aqueous systems

Current Opinion in Colloid and Interface Science

Volumn 15, Issue 5, 2010, Pages 359-364

  Friberg, Stig E ^a  

^a CLARKSON UNIVERSITY   (United States)

Author keywords

Liquid crystals; Metal foams; Oil foams; Particle stabilization; Rubber foams

Indexed keywords

CRYSTAL LINES; LIQUID OIL; METAL FOAMS; MULTIPHASE APPROACH; NON-AQUEOUS LIQUIDS; NON-AQUEOUS SYSTEM; OIL FOAMS; PARTICLE STABILIZATION; PLASTIC FOAMS; SOLID METALS; SOLID PARTICLES;

CRYSTALS; LIQUID CRYSTALS; METALS; RUBBER; STABILIZATION;

FOAMS;

METAL; OIL; PLASTIC; RUBBER;

AEROSOL; FOAM; LIQUID CRYSTAL; MOLECULAR STABILITY; REVIEW; SOLID;

EID: 77955773886     PISSN: 13590294     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.cocis.2010.05.011     Document Type: Review

References (71)

1. Bikerman J. Foams 1953, Reinholds, New York.
2. Exerowa D., Kruglyakov P. Foam and Foam Films. Fundamentals of Interface and Colloid Science 1998, Elsevier, Amsterdam, Chapter 7. J. Lyklema (Ed.).
3. Scheludko A. Thin liquid films. Adv Colloid Interface Sci 1967, 1:391-403.
4. Bergeron V., Walstra P. Fundamentals of Interface and Colloid Science 2005, vol. 5. Elsevier, Amsterdam, Chapter 7. J. Lyklema (Ed.).
5. Foams. Theory, Measurements and Applications 1996, Marcel Dekker, New York. R. Prudhomme, S.A. Khan (Eds.).
6. Langevin D. Influence of interfacial rheology on foam and emulsion properties. Adv Colloid Interface Sci 2000, 88:209-222.
7. Highlights in Colloid Science 2008, Wiley-VCH, Weinheim. D. Platikanov, D. Exerowa (Eds.).
8. Budai I., Kaptay G. A new class of engineering materials: particle-stabilized metallic emulsions and tectic alloys. Metall Mat Trans A 2009, 40:1524-1527.
9. Callaghan I.C., McKechnie A.L., Ray J.E., Wainwright J.C. Identification of crude oil components responsible for foaming. SPE J 1985, 25:171-175.
10. Poindexter M., Zaki N., Kilpatrick P. Factors contributing to petroleum foaming. Energy Fuels 2002, 16:700-709.
11. Lieberman N., Golden S. Foaming is leading cause of tower flooding. Oil Gas J 1989, 87:45-53.
12. Habib I., Shaban A. Study of foaming and carry-over problems in oil and gas separators. Gas Sep Purif 1995, 9:81-86.
13. Kremer, L. N. Silicone defoamer to control hydrocarbon foam. US Patent 7427350, 2008.
14. Stuart, R., Fournier, L B. Hydrocarbon Foams, US patent 4432882, 1984.
15. Bergeron V., Shogl F.N. Thin film forces in hydrocarbon foam films and their application to gas-blocking foams in enhanced oil recovery. Colloid Surf A 1997, 123:609-622.
16. Karl F. Oil Field Chemicals 2003, Elsevier Science, Amsterdam.
17. Yang J., Jovancicevic V., Ramachandran S. Foam for gas well deliquificatio. Colloids Surf A 2007, 309:177-181.
18. Vikingstad A.K., Aarra M.G., Skauge A. Effect of surfactant structure on foam-oil interactions: comparing fluorinated surfactant and alpha olefin sulfonate in static foam tests. Colloids Surf A 2006, 279:105-112.
19. Kichkin G.I. Foam formation in lubricating oils. Chem Technol Fuels Oils 1966, 2:272-274.
20. Yutaka T. Base oil foaming in driving system oil and effects of antifoaming agent. Idemitsu Techn Rep 1999, 42:375-381.
21. Nadcarni K.R.A. Foam test for lubricating oils. J ASTM Int (JAI) 2009, 6:1-15.
22. Mellema J., Benjamins K. The importance of the Marangoni effect for the foaming of hot oils with phospholipids. Colloids Surf 2004, A 237:113-118.
23. Schmidt D.L. Non-Aqueous Foams. Foams. Theory, Measurements and Applications 1996, 287-315. Marcel Dekker, New York. R. Prudhomme, S.A. Khan (Eds.).
24. Negishi S., Itakura M., Arimoto N., Takeshi T., Tsukia T. Measurement of foaming of frying oil and effect of the composition of TG on foaming. J Am Oil Chem Soc 2003, 80:471-474.
25. Atallah S., Buccigross H.L. Development of halogenated hydrocarbon foam (halofoam) extinguishants. Fire Technol 1971, (7).
26. Firefighter's Handbook I and II 2009, Penn Well Co, Oklahoma. G. Corbett (Ed.).
27. Shastri V.P., Martin I., Langer R. Macroporous polymer foams by hydrocarbon templating. Proc Natl Acad Sci USA 2000, 97:170-1975.
28. Altoe P., Dean G.H., Parenti V., Clavel P. Comparison of technology and new developments with hydrocarbon blown rigid foams. J Cell Plast 2000, 36:70-85.
29. Polyurethanes, Wikipedia, Nov 2009.
30. Coda, R. A study of biodegradable cellulosic materials for foams and sponges. Thesis, Department of Chemical Engineering, Georgia Institute of Technology, GA April 18, 2005.
31. Mombara N., Pilosof A.M.R. Mathematical model for formation rate and collapse of foams from enzyme modified wheat flour. J Food Sci 2006, 59:626-628.
32. Primo-Martín C., Hamer R.J., de Jongh H.H.J. Surface layer properties of dough liquor components. Food Bioph 2006, 1:83-93.
33. Davies G.J., Zhen J. Review of metallic foams: their production, properties and applications. J Mat Sci 1983, 18:1899-1911.
34. Kaptay G. Interfacial criteria to produce metal matrix composites and ceramic particle stabilized metallic foams. Mat Sci Forum 2003, 414-415:419-424.
35. Sakai T., Kaneko Y. The effect of some foam boosters on the foamability and foam stability of anionic systems. J Surfactants Deterg 2004, 7:291-295.
36. Oyo M., Minagawa M. Measurement of liquid volume fraction of foam by the electric capacitance method. J Jpn Oil Chem Soc 1993, 42:302-308.
37. Pacho D., Davies D. Detection and monitoring of oil foams using raw capacitance data. Ind Eng Chem Res 2003, 42:636-645.
38. Masatoshi S., Michio T., Teijo K., Noburo S. Foaming ability of a non-aqueous fluid with dextrin fatty esters having different hydrocarbon chains. J Jpn Soc Col Mat 2003, 76:93-96.
39. Ross S., Nishioka G. Foaminess of binary and ternary solutions. Colloid Polym Sci 1977, 255:560-568.
40. Friberg S.E., Ahmad S. Liquid crystals and the foaming capacity of an amine dissolved in water and p-xylene. J Colloid Interface Sci 1971, 35:175-177.
41. Jederstroem G., Rydhag L., Friberg S.E. Liquid crystalline phases in aerosol formulations. J Pharm Sci 1979, 62:1979-1983.
42. Friberg S.E., Wohn C.S., Greene B., van Gilder R. A non-aquepous foam with excellent stability. J Colloid Interface Sci 1984, 101:593-595.
43. Friberg S.E., Blute I., Kunieda H., Stenius P. Stability of hydrophobic foams. Langmuir 1986, 2:659-667.
44. Zisman W. Relation of the equilibrium contact angle to liquid and solid constitution. Adv Chem Ser 1964, vol. 43:1-13. ACS, Washington. R. Gould (Ed.).
45. Blute I., Friberg S.E., Stenius P. Foam stability in a glycerol system. J Colloid Interface Sci 1989, 118:543-549.
46. Young T. An essay on the cohesion of fluids. Phil Trans R Soc Lond 1805, 95:65-87.
47. Widom B. Line tension at the wettng transition. Physica A 1990, 168:149-159.
48. Aveyard R., Clint J.H. Particle wettability and line tension. J Chem Soc Faraday Trans 1996, 92:85-89.
49. Binks B.P., Murakami R. Phase inversion of particle-stabilized materials from foams to dry water. Nat Mater 2006, 5:865-869.
50. Gonzenbach U.T., Studart A.R., Tervoort E., Gauckler L. Tailoring the microstructure of particle-stabilized wet foam. Langmuir 2007, 23:1025-1032.
51. Denkov N.D., Ivanov I.B., Kralchevsky P.A., Wasan D.T. A possible mechanism of stabilization of emulsions by solid particles. J Colloid Interface Sci 1992, 150:589-593.
52. Kaptay G. On the equation of maximum capillary pressure induced by solid particles to stabilize emulsions and foams and on the emulsion stability diagrams. Colloid Surf 2006, 282-283:387-401.
53. Friberg S.E. Emulsion stabilization by solid particles - a two layer approach. J Dispersion Sci Technol 2005, 26:647-654.
54. Exerowa D., Platikanov D. Thin liquid films from aqueous solutions of non-ionic polymeric surfactants. Adv Colloid Interface Sci 2009, 74:147-148.
55. Georgireva D., Cagna A., Langevin D. Link between surface elasticity and foam stability. Soft Matter 2009, 5:2063-2071.
56. Bu W.F., Jin H., Ichinose I. Foam films obtained with ionic liquid. Angew Chem Int Ed 2008, 47:901-905.
57. Friberg S.E. Evaporation from an ionic liquid emulsion. J Colloid Interface Sci 2007, 307:494-499.
58. Chen Z.-L., Yan Y.-L., Huang X.-B. Stabilization of foams solely with polyoxyethylene type surfactant. Colloids Surf A Physicochem Eng Asp 2008, 331:239-244.
59. Shrestha L.K., Aramaki K., Kato H., Takase Y., Kunieda H. Foaming propertes of monoglycerol esters in non-polar oil. Langmuir 2006, 22:8337-8345.
60. Kunieda H., Shrestha L.K., Acharya D.P., Kato H., Takase Y., Gutierez J.M. Superstable non-aqueous foams in diglycerol fatty esters-non-polar oils system. J Dispers Sci Technol 2007, 28:133-142.
61. Krog N.J., Sparsoe F.V. Food emulsifiers: their chemical and physical properties. Food Emulsions 2004, 45-92. Marcel Dekker, New York. 4th edn. S.E. Friberg, K. Larsson, J. Sjoeblom (Eds.).
62. Shrestha L.K., Shrestha R.G., Sharma S.C., Aramaki K. Stabilization of non-aqueous foams with lamellar liquid crystals in diglycerol monolaurate system. J Colloid Interface Sci 2008, 328:172-179.
63. Shrestha R.G., Shrestha L.K., Solans C., Gonzales C., Aramaki K. Nonaqueous foam with outstanding stability in diglycerol monomyristate/olive oil system. Colloid Surf A 2010, 353:157-165.
64. Akartuna I., Tervoort E., Wong J.C.-H. Macroporous polymers from particle-stabilized emulsions. Polymer 2009, 50:3645-3651.
65. Wan D., Jianhua Xu J., Zhang J., Tong X., Hu J. Historical and projected emissions of major halocarbons in China. Atmos Environ 2009, 43:5822-5829.
66. Gandini A. Polymers from reneable resources: a challenge for the future of macomolecular materials. Macromolecules 2008, 41:9491-9504.
67. Monomers, Polymers and Composites from Renewable Resources 2008, Elsevier, Amsterdam. M.N. Belgacem, A. Gandini (Eds.).
68. Lee S.T., Park C.B., Ramesh N.B. Biodegradable Foams 2007, Taylor and Francis, Boca Raton, Florida.
69. Meiling Deng M., Zhou Q., Anke D.A., van Kasteren J., Wang Y. Preparation of nanoporous cellulose foams from cellulose-ionic liquid solutions. Mat Lett 2009, 63:18551-1854.
70. Salgado P.R., Schmidt V.C., Ortiz S.E.M., Mauri A.N., Laurindo J.B. Biodegradable foams based on cassava starch, sunflower proteins and cellulose fibers obtained by a baking process. J Food Eng 2008, 85:435-443.
71. Wang H.J., Rong M.Z., Hu J., Chen H.W., Czigani T. Biodegradable foam plastics based on castor oil. Biomacromolecules 2008, 9:615-623.