High strength modified nanofibrillated cellulose-polyvinyl alcohol films

Cellulose

Volumn 21, Issue 5, 2014, Pages 3561-3571

  Virtanen, Sanna ^a   Vuoti, Sauli ^a   Heikkinen, Harri ^a   Lahtinen, Panu ^a  

^a NONE   (Finland)

Author keywords

Chemical surface modification; Nanocomposites; Nanofibrillated cellulose; Polyvinyl alcohol; Reactive grinding

Indexed keywords

CELLULOSE; CELLULOSE FILMS; CHEMICAL MODIFICATION; GRINDING (MACHINING); NANOCOMPOSITES; POLYVINYL ALCOHOLS; REINFORCEMENT; SURFACE TREATMENT;

CHEMICAL SURFACE MODIFICATION; DEGREES OF SUBSTITUTION; MECHANICAL PERFORMANCE; NANOFIBRILLATED CELLULOSE; NANOFIBRILLATED CELLULOSE (NFC); POLY (VINYL ALCOHOL) (PVA); REACTIVE GRINDING; SOLUTION-CASTING TECHNIQUE;

COMPOSITE FILMS;

CELLULOSE DERIVATIVES; CELLULOSE FILM; GRINDING; MECHANICAL PROPERTIES; POLYVINYL ALCOHOL; REINFORCEMENT;

EID: 84904276210     PISSN: 09690239     EISSN: None     Source Type: Journal    
DOI: 10.1007/s10570-014-0347-7     Document Type: Article

References (54)

1. Alexy P, Káchova D, Kršiak M, Bakoš D, Šimkova B (2002) Poly(vinyl alcohol) stabilisation in thermoplastic processing. Polym Degrad Stab 78: 413-421.
2. Arola S, Tammelin T, Setälä H, Tullila A, Linder MB (2012) Immobilization stabilization of proteins on nanofibrillated cellulose derivatives and their bioactive film formation. Biomacromolecules 13: 594-603.
3. Asikainen S, Fuhrmann A, Robertsen F (2010) Birch pulp fractions for fine paper and board. Nord Pulp Pap Res J 25: 269-276.
4. Bai Y, Li Y, Wang M (2006) Study on synthesis of a hydrophilic bead carrier containing epoxy groups and its properties for glucoamylase immobilization. Enzyme Microb Technol 39: 540-547.
5. Bhatnagar A, Sain M (2005) Processing of cellulose nanofiber-reinforced composites. J Reinf Plast Compos 24: 1259-1268.
6. Bledzki A, Gassan J (1999) Composites reinforced with cellulose based fibres. Prog Polym Sci 24: 221-274.
7. Bulota A, Jääskeläinen AS, Paltakari J, Hughes M (2011) Properties of biocomposites: influence of preparation method, testing environment and a comparison with theoretical models. J Mater Sci 46: 3387-3398.
8. Burton S, Harding D (1997) Bifunctional etherification of bead cellulose for ligand attachment with allyl bromide and allyl glycidyl ether. J Chromatogr A 775: 29-38.
9. Cai X, Riedl B, Ait-Kadi A (2003) Effect of surface-grafted ionic groups on the performance of cellulose-fiber-reinforced thermoplastic composites. J Pol Sci B Polym Phys 41: 2022-2032.
10. Chai W-L, Chow J-D, Chen C-C (2012) Effects of modified starch and different molecular weight polyvinyl alcohols on biodegradable characteristics of polyvinyl alcohol/starch blends. J Polym Environ 20: 550-564.
11. Dufresne A, Cavaille JY, Vignon MR (1997) Mechanical behaviour of sheets prepared from sugar beet cellulose microfibrils. J Appl Polym Sci 64: 1185-1194.
12. Ebeling T, Paillet M, Borsali R, Diat O, Dufresne A, Cavaille JY, Chanzy H (2009) Shear-induced orientation phenomena in suspensions of cellulose microcrystals, revealed by small angle X-ray scattering. Langmuir 15: 6123-6126.
13. Eronen P, Österberg M, Heikkinen S, Tenkanen M, Laine J (2011) Interactions of structurally different hemicelluloses with nanofibrillar cellulose. Carbohydr Polym 86: 1281-1290.
14. Fakirov S, Bhattacharyya D, Shields RJ (2008) Nanofibril reinforced composites from polymer blends. Colloids Surf A Physicochem Eng Aspects 313-314: 2-8.
15. Flieger M, Kantorová M, Prell A, Řezanka T, Votruba J (2003) Biodegradable plastics from renewable sources. Folia Microbiol 48(1): 27-44.
16. Fukuzumi H, Saito T, Iwata T, Kumamoto Y, Isogai A (2009) Transparent and high gas barrier films of cellulose nanofibers prepared by TEMPO-mediated oxidation. Biomacromolecules 10: 162-165.
17. Guirguis OW, Moselhey MTH (2012) Thermal and structural properties of poly(vinyl alcohol) and hydroxypropyl cellulose blends. Nat Sci 4(1): 57-67.
18. Heinze T, Lincke T, Fenn D, Koschella A (2008) Efficient allylation of cellulose in dimethyl sulfoxide/tetrabutylammonium fluoride trihydrate. Polym Bull 61: 1-9.
19. Hrabalova M, Schwanninger M, Wimmer R, Gregorova A, Zimmermann T, Mundigler N (2011) Fibrillation of flax and wheat straw cellulose: effects on thermal, morphological, and viscoelastic properties of poly(vinylalcohol)/fibre composites. BioResources 6(2): 1631-1647.
20. Hubbe M, Rojas O, Lucia L, Sain M (2008) Cellulosic nanocomposites: a review. BioResources 3: 929-980.
21. Huijbrechts A, Haar R, Schols H, Franssen M, Boeriu C, Sudhölter E (2010) Synthesis and application of epoxy starch derivatives. Carbohydr Polym 79: 858-866.
22. Jandura P, Kokta B, Riedl B (2000) Fibrous long-chain organic acid cellulose esters and their characterization by diffuse reflectance FTIR spectroscopy, solid state CP/MAS 13C-NMR, and X-ray diffraction. J Appl Polym Sci 78: 1354-1365.
23. Jipa IM, Dobre L, Stroescu M, Stoica-Guzun A, Jinga S, Dobre T (2012) Preparation and characterization of bacterial cellulose-poly (vinyl alcohol) films with antimicrobial properties. Mater Lett 66: 125-127.
24. Jonoobi M, Harun J, Mathew AP, Oksman K (2010) Mechanical properties of cellulose nanofiber (CNF) reinforced polylactic acid (PLA) prepared by twin screw extrusion. Compos Sci Technol 70: 1742-1747.
25. Kangas H, Lahtinen P, Sneck A, Saariaho A-M, Laitinen O, Hellen E (2014) Characterization of fibrillated celluloses. A short review and evaluation of characteristics with a combination of methods. Nordic Pulp Pap Res J 29: 129-143.
26. Kavaliauskaite R, Klimaviciute R, Zemaitaitis A (2008) Factors influencing production of cationic starches. Carbohydr Polym 73: 665-675.
27. Leitner J, Hinterstoisser B, Wastyn M, Keckes J, Gindl W (2007) Sugar beet cellulose nanofibril-reinforced composites. Cellulose 14: 419-425.
28. Li W, Zhao X, Huang Z, Liu S (2013) Nanocellulose fibrils isolated from BHKP using ultrasonication and their reinforcing properties in transparent poly(vinyl alcohol) films. J Polym Res 20(8): 1-7.
29. Lin MS, Huang CS (1992) Syntheses and characterizations of allyl cellulose and glycidyl cellulose. J Polym Sci Part A Polym Chem 30(11): 2303-2312.
30. Liu D, Sun X, Tian H, Maiti S, Ma Z (2013) Effects of cellulose nanofibrils on the structure and properties on PVA nanocomposites. Cellulose 20: 2981-2989.
31. Lu J, Wang T, Drzal LT (2008) Preparation and properties of microfibrillated cellulose polyvinyl alcohol composite materials. Compos A 39: 738-746.
32. Mu-Shih L, Chung-Song H (1992) Syntheses and characterizations of allyl cellulose and glycidyl cellulose. J Polym Sci A 30: 2303-2312.
33. Nakagaito AN, Yano H (2008) The effect of fiber content on the mechanical and thermal expansion properties of biocomposites based on microfibrillated cellulose. Cellulose 15: 555-559.
34. Nakagaito AN, Fujimura A, Sakai T, Hama Y, Yano H (2009) Production of microfibrillated cellulose (MFC)-reinforced polylactic acid (PLA) nanocomposites from sheets obtained by a papermaking-like process. Comp Sci Technol 69: 1293-1297.
35. Nichifor M, Stanciu M, Simionescu B (2010) New cationic hydrophilic and amphiphilic polysaccharides synthesized by one pot procedure. Carbohydr Polym 82: 965-975.
36. Nishimura M, Donkai N, Miyamoto T (1997) Preparation and properties of a new type of comb-shaped, amphiphilic cellulose derivative. Cellulose 4: 89-98.
37. Peresin MS, Habibi Y, Zoppe JO, Pawlak JJ, Rojas OJ (2010) Nanofiber composites of polyvinyl alcohol and cellulose nanocrystals: manufacture and characterization. Biomacromolecules 11: 674-681.
38. Shang Y, Peng Y (2007) Research of a PVA composite ultrafiltration membrane used in oil-in-water. Desalination 204: 322-327.
39. Shiramizu K, Shiga N, Magara T, Oguni K, Lin L (2012) Cellulose nanofibers, method for producing same, composite resin composition and molded body. US Patent 2012/0328877 A1.
40. Siqueira G, Bras J, Dufresne A (2010) Cellulosic bionanocomposites: a review of preparation, properties and applications. Polymers 2: 728-765.
41. Spinu M, Dos Santos N, Le Moigne N, Navard P (2011) How does the never-dried state influence the swelling and dissolution of cellulose fibres in aqueous solvent? Cellulose 18: 247-256.
42. Srithep Y, Turng L-S, Sabo R, Clemons C (2012) Nanofibrillated cellulose (NFC) reinforced polyvinylalcohol (PVOH) nanocomposites: properties, solubility of carbon dioxide, and foaming. Cellulose 19: 1209-1223.
43. Stenstad P, Andresen M, Tanem BS, Stenius P (2008) Chemical surface modifications of microfibrillated cellulose. Cellulose 15: 35-45.
44. Tang C, Liu H (2008) Cellulose reinforced poly (vinyl alcohol) composite film with high visible light transmittance. Compos A 39: 1638-1643.
45. 13C NMR determination of substituent distribution in carboxymethylcellulose by use of its pre-esterified derivatives. Carbohydr Res 291: 99-108.
46. Tomasik P, Schilling C (2004) Chemical modification of starch. Adv Carbohydr Chem Biochem 59: 175-403.
47. Virtanen S, Vartiainen J, Setälä H, Tammelin T, Vuoti S (2014) Modified nanofibrillated cellulose-polyvinyl alcohol films with improved mechanical performance. RSC Adv 4: 11343-11350.
48. Vuoti S, Talja R, Johansson L-S, Heikkinen H, Tammelin T (2013) Solvent impact on esterification and film formation ability of nanofibrillated cellulose. Cellulose 20: 2359-2370.
49. Wan WK, Hutter JL, Millon LE, Guhados G (2006) Bacterial cellulose and its nanocomposites for biomedical applications. In: Oksman K, Sain M (eds) Cellulose nanocomposites. Processing, characterization, and properties. American Chemical Society, Washington DC.
50. Wang B, Sain M (2007) Dispersion of soybean stock-based nanofiber in a plastic matrix. Polym Int 56: 538-546.
51. White J, Beck L, Ferguson D, Haw J (1992) Background suppression in MAS-NMR. J Magn Res 100: 336-341.
52. Wu J, Yu D, Chan C-M, Kim J, Mai Y-W (2000) Effect of fiber pretreatment condition on the interfacial strength and mechanical properties of wood fiber/PP composites. J Appl Polym Sci 76: 1000-1010.
53. Zhang W, Yang X, Li C, Liang M, Lu C, Deng Y (2011) Mechanochemical activation of cellulose and its thermoplastic polyvinyl alcohol ecocomposites with enhanced physicochemical properties. Carbohydr Polym 83: 257-263.
54. Zimmerman T, Pöhler E, Geiger T (2004) Cellulose fibrils for polymer reinforcement. Adv Eng Mater 6: 754-761.