Understanding surface wear in engineering materials

Surface Coatings for Protection Against Wear

Volumn , Issue , 2006, Pages 1-57

  Wood, R J K ^a  

^a UNIVERSITY OF SOUTHAMPTON   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

CONDENSED MATTER PHYSICS;

ENGINEERING MATERIALS; SURFACE WEAR;

SURFACES;

EID: 84904075159     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1533/9781845691561.1     Document Type: Chapter

References (130)

1. Cohen J.M., Cohen M.J. The Penguin Dictionary of Quotations 1960, Penguin Books, London.
2. Knowles E. The Oxford Dictionary of Quotations 2004, Oxford University Press, Oxford.
3. Larousse Dictionary of Science and Technology 1995, Larousse, Edinburgh. 1st edition. H. Mair, P.M.B. Walker, P. Walker (Eds.).
4. Hertz H. Über die Berührung fester elastischer Körper' ('On the contact of elastic solids'). J. Reine Angew. Math 1882, 92:156-171. (Engl. transl., D.E. Jones and G.A. Schott (Eds) (1896), Miscellaneous Papers by H. Hertz, Macmillan, London).
5. Tribology Group, Institution of Mechanical Engineers (1997), Tribology Design Data, Part 3: Contact Mechanics, Institution of Mechanical Engineers, London.
6. Tribology Laboratory, University of Florida, Gainesville, Florida, USA, . http://www.grove.ufl.edu/~wgsawyer/Laboratory/Software/Software.HTML.
7. Johnson K.L. Contact Mechanics 1985, Cambridge University Press, Cambridge.
8. Suh N.P. Tribophysics 1986, Prentice-Hall, Englewood Cliffs, New Jersey.
9. Rabonowicz E. Friction and Wear of Materials 1965, John Wiley, New York.
10. Alanou M.P., Evans H.P., Snidle R.W. Effect of different surface treatments and coatings on the scuffing performance of hardened steel discs at very high sliding speeds. Tribol. Int 2004, 37:93-102.
11. Kweh C.C., Evans H.P., Snidle R.W. Micro-elastohydrodynamic lubrication of an elliptical contact with transverse and three-dimensional sinusoidal roughness. Trans. ASME, J. Tribol 1989, 111:577.
12. Snidle, R. (2004), Private communication.
13. Hamilton G.M. Explicit equations for the stresses beneath a sliding spherical contact. Proc. Instn Mech. Engrs 1983, 197:53-59.
14. Taylor L., Dratva A., Spikes H.A. Friction and wear behaviour of zinc dialkyl dithiophosphate additive. Tribol. Trans 2000, 43(3):469-479.
15. Bowden F.P., Tabor D. The Friction and Lubrication of Solids, Part I; (1964), The Friction and Lubrication of Solids, Part II 1950, Clarendon Press, Oxford.
16. Morris S., Wood R.J.K., Harvey T.J., Powrie H.E.G. Electrostatic charge monitoring of unlubricated sliding wear of a bearing steel. Wear 2003, 255:430-443.
17. Suh N.P., Sin H.C. The genesis of friction. Wear 1981, 69:91-114.
18. Erdemir A. The role of hydrogen in tribological properties of diamondlike carbon films. Surf. Coat. Technol 2001, 146:292-297.
19. Briscoe B.J., Tabor D. Polymer Surfaces 1978, 1-23. John Wiley, New York, 'Friction and wear of polymers'. D.T. Clark, W.J. Feast (Eds.).
20. Williams J.A. Engineering Tribology 1994, Oxford University Press, Oxford.
21. Holmberg K., Folkeson A. Operational Reliability and Systematic Maintenance 1991, Elsevier, London.
22. Archard J.F. Contact and rubbing of flat surfaces. J. Appl. Phys 1953, 24:981-988.
23. Preston F. The theory and design of plate glass polishing machines. J. Soc. Glass Technol 1927, 9:214-256.
24. Hirst W., Lancaster J.K. Surface film formation and metallic wear. J. Appl. Phys 1956, 27:1057-1065.
25. Lim S.C., Ashby M.F. Wear mechanism maps. Acta Metall 1987, 35(1):1-24.
26. Childs T.H.C. The mapping of metallic sliding wear. Proc. Instn Mech. Engrs, Part C: J. Mech. Engng Sci 1988, 202(C6):376-395.
27. Quinn T.F.J. Microscopic Aspects of Adhesion and Lubrication 1984, 579-597. Elsevier, Amsterdam, 'The role of oxide films in the friction and wear of metals'. J.M. Georges (Ed.).
28. Neale M.J., Gee M. Guide to Wear Problems and Testing for Industry 2000, Professional Engineering Publishing, London.
29. Kusano Y., Hutchings I.M. Modelling the entrainment and motion of particles in a gap: application to abrasive wear. Proc. Instn Mech. Engrs, Part J: J. Engng Tribol 2003, 217:427-433.
30. Shipway P.H. A mechanical model for particle motion in the microscale abrasion wear test. Wear 2004, 257(9-10):984-991.
31. Williams J.A., Hyncica A.M. Abrasive wear in lubricated contacts. J. Phys. D: Appl. Phys 1992, 25:A81.
32. Williams J.A., Hyncica A.M. Mechanisms of abrasive wear in lubricated contacts. Wear 1992, 152(1):57-74.
33. Hokkirigawa K., Kato K. An experimental and theoretical investigation of ploughing, cutting and wedge formation during abrasive wear. Tribol. Int 1988, 21:51-58.
34. Bose K., Wood R.J.K. Influence of load and speed on rolling microabrasion of CVD diamond and other hard coatings. Diamond Relat. Mater 2003, 12(3-7):753-756.
35. Bello J.O., Wood R.J.K. Grooving micro-abrasion of polyamide 11 coated carbon steel tubulars for downhole application. Wear 2003, 255:1157-1167.
36. Adachi K., Hutchings I.M. Wear-mode mapping for the micro-scale abrasion test. Wear 2003, 255:23-29.
37. Archard J.F. Wear Control Handbook 1980, 35-80. American Society of Mechanical Engineers, New York, 'Wear theory and mechanisms'. M.B. Peterson, W.O. Winer (Eds.).
38. Moore M.A. Abrasive wear. Mater. Engng Applic 1978, 1:97-111.
39. Hutchings I.M. Tribology - Friction and Wear of Engineering Materials 1992, Arnold, London.
40. Bourne N.K., Field J.E. A high-speed photographic study of cavitation damage. J. Appl. Phys 1995, 78:4423-4427.
41. Field J.E. Liquid impact erosion. Phys. Bull 1986, 37:70-72.
42. Dear J.P., Field J.E. High-speed photography of surface geometry effects in liquid/solid impact. J. Appl. Phys 1988, 63:1015-1021.
43. Field J.E. Physics of liquid impact, shock wave interactions with cavities, and the implications to shock wave lithotripsy. Phys. Med. Biol 1991, 36:1475-1484.
44. Field J.E., Gorham D.A., Rickerby D.S. Erosion: Prevention and Useful Applications 1979, 298-319. American Society for Testing and Materials, Philadelphia, Pennsylvania, 'High speed liquid jet and drop impact on brittle targets' ASTM STP 664.
45. Bowden F.P., Field J.E. The brittle fracture of solids by liquid impact, by solid impact, and by shock. Proc. R. Soc. A 1964, 282:331-352.
46. Field J.E., Hutchings I.M. 1984 'Impact erosion processes. Proceedings of the 3rd Conference on the Mechanical Properties of Materials at High Rates of Strain, Institute of Physics Conference Series. 1984, Vol. 70:349-371. Oxford.
47. Moore A.J., Wood R.J.K. 1992 'Erosive wear mapping of pipeline materials. Proceedings of the Plastic Pipes Conference, Konigshofen 1992, 1-10. The Plastics and Rubber Institute, London, Paper E1/4.
48. Hashish M. 1987, 'An improved model of erosion by solid particles. Proceedings of the 7th International Conference on Erosion by Liquid and Solid Impact 1987, Cambridge Cavendish Laboratory, Cambridge, Paper 66.
49. Meng H.C., Ludema K.C. Wear models and predictive equations - their form and content. Wear 1995, 181-183:443-457.
50. Finnie I. Some observations on the erosion of ductile metals. Wear 1972, 19:81-90.
51. Gane N., Murray M.S. 1979, 'The transition from ploughing to cutting in erosive wear. Proceedings of the 5th International Conference on Erosion by Solid and Liquid Impact 1979, 1-8. Cambridge, Cavendish Laboratory, Cambridge, Paper 40.
52. Keating A., Nesic S. Numerical prediction of erosion-corrosion in bends. Corrosion 2001, 57(7):621-633.
53. Bergevin K. Effect of slurry velocity on the mechanical and electrochemical components of erosion-corrosion in vertical pipes. Master's Thesis 1984, University of Saskatchewan, Saskatchewan, Canada.
54. Bitter J.G.A. A study of erosion phenomena. Wear 1963, 6:5-21.
55. Forder A., Thew M.T., Harrison D. A numerical investigation of solid particle erosion experienced within oilfield control valves. Wear 1988, 216:184-193.
56. Wood R.J.K., Jones T.F., Miles N.J., Ganeshalingham J. Upstream swirl-induction for reduction of erosion damage from slurries in pipeline bends. Wear 2001, 250(1-12):771-779.
57. Wood R.J.K., Jones T.F. Investigations of sand-water induced erosive wear of AISI 304L stainless steel pipes by pilot-scale and laboratoryscale testing. Wear 2003, 255:206-218.
58. Wood R.J.K., Jones T.F., Ganeshalingam J., Wang M. Erosion modelling of swirling and non-swirling slurries in pipes. Hydrotransport 15, Banff, Canada, 3-5 June 2002 2002, 497. BHR Group, Cranfield, Bedfordshire.
59. Wood R.J.K., Jones T.F., Ganeshalingam J. 2002, 'Erosion in swirl inducing pipes. Proceedings of the ASME Fluids Engineering Division Summer Meeting, Montreal, Canada, July 2002, American Society of Mechanical Engineers, New York, Paper FEDSM2002-31287.
60. van der Zwaag S., Field J.E. The effect of thin hard coatings on the Hertzian stress field. Phil. Mag. A 1982, 46:133-150.
61. Hedenqvist P., Olsson M. Solid particle erosion of titanium carbide coated high speed steel. Tribol. Int 1990, 23:173-181.
62. Pajares A., Wei L., Lawn B.R., Berndt C.C. Contact damage in plasma-sprayed alumina-based coatings. J. Am. Ceram. Soc 1996, 79:1907-1914.
63. Komvopoulos K. Finite element analysis of a layered elastic solid in normal contact with a rigid surface. J. Tribol 1988, 110:477-485.
64. Fisher-Cripps A.C., Lawn B.R., Pajares A., Wei L. Stress analysis of elastic-plastic contact damage in ceramic coatings on metal substrates. J. Am. Ceram. Soc 1996, 79:2619-2625.
65. Verspui M.A., Slikkerveer P.J., Skerka G.J.E., Oomen I., de With G. Validation of the erosion map for spherical particle impacts on glass. Wear 1998, 215:77-82.
66. Komvopoulos K. Elastic-plastic finite element analysis of indented layered media. J. Tribol 1989, 111:430-439.
67. Ritter J.E. Erosion of Ceramic Materials 1992, Trans Tech Publications, Zurich.
68. Wood R.J.K. The sand erosion performance of coatings. Mater. Des 1999, 20:179-191.
69. Wood R.J.K., Mellor B.G., Binfield M.L. Sand erosion performance of detonation gun applied tungsten carbide/cobalt-chromium coatings. Wear 1997, 211:70-83.
70. Speyer A.J., Stokes K.R., Wood R.J.K. Erosion of aluminium based claddings on steel by sand in water. Wear 2001, 250(1-12):803-809.
71. Tan K.S., Wood R.J.K., Stokes K.R. The slurry erosion behaviour of high velocity oxy-fuel (HVOF) sprayed aluminium bronze coatings. Wear 2003, 255:195-205.
72. Wood R.J.K., Puget Y., Trethewey K.R., Stokes K. The performance of marine coatings and pipe materials under fluid-borne sand erosion. Wear 1998, 219:46-59.
73. Wheeler D.W., Wood R.J.K. Erosive wear behaviour of thick CVD diamond coatings. Wear 1999, 225-229:523-536.
74. Wheeler D.W., Wood R.J.K. Solid particle erosion of CVD diamond coatings. Wear 1999, 233-235:306-318.
75. Wood R.J.K., Wheeler D.W., Lejeau D.C., Mellor B.G. Sand erosion performance of CVD boron carbide coated tungsten carbide. Wear 1999, 233-235:134-150.
76. Wheeler D.W., Wood R.J.K. High velocity sand impact damage on CVD diamond. Diamond Relat. Mater 2001, 10:459-462.
77. Wheeler D.W., Wood R.J.K. Erosion of hard surface coatings for use in offshore gate valves. Wear 2005, 258:526-536.
78. Wheeler D.W., Wood R.J.K. Solid particle erosion of diamond coatings under non-normal impact angles. Wear 2001, 250(1-12):796-802.
79. Bose K., Wood R.J.K. High velocity solid particle erosion behaviour of CVD boron carbide on tungsten carbide. Wear 2005, 258(1-4):366-376.
80. Wheeler D.W., Wood R.J.K. CVD diamond: erosion resistant hard material. Surf. Engng 2003, 19(6):466-470.
81. Timoshenko S.P., Goodier J.N. Theory of Elasticity 1970, McGraw-Hill, New York. 3rd edition.
82. Johnson K.L. Contact mechanics and the wear of metals. Wear 1995, 190:162-170.
83. Kapoor A., Johnson K.L., Williams J.A. A model for the mild ratchetting wear of metals. Wear 1996, 200:38-44.
84. Wong S.K., Kapoor A., Williams J.A. Shakedown limits on coated and engineered surfaces. Wear 1997, 203:162-170.
85. Fouvry S., Duo P., Perruchaut P. A quantitative approach of Ti-6Al-4V fretting damage: friction, wear and crack nucleation. Wear 2004, 257(9-10):916-929.
86. Baker R.F., Olver A.V. Direct observations of fretting wear of steel. Wear 1997, 203:425-433.
87. Stolarski T.A. Mechano-chemical wear of ceramics. J. Mater. Sci 1999, 34(15):3609-3622.
88. Rainforth W.M. The sliding wear of ceramics. Ceram. Int 1996, 22(5):365-372.
89. Andersson P., Blomberg A. Instability in the tribochemical wear of silicon carbide in unlubricated sliding contacts. Wear 1994, 174(1-2):1-7.
90. Wilson S., Alpas A.T. Tribo-layer formation during sliding wear of TiN coatings. Wear 2000, 245(1-2):223-229.
91. Wei J.J., Xue Q.J., Wang H.Q. Effect of water and n-alcohols on the tribological properties of a chromium-oxide coating. Lubric. Engng 1993, 49(12):948-953.
92. Standard Guide for Determining Synergism between Wear and Corrosion 1993, ASTM Standard G 119-93, American Society for Testing and Materials, Philadelphia, Pennsylvania.
93. Zeisel H., Durst F. Computations of erosion-corrosion processes in separated two-phase flows. Corrosion/1990 1990, NACE International, Houston, Texas, Paper 29.
94. Zhou S., Stack M.M., Newman R.C. Characterization of synergistic effects between erosion and corrosion in an aqueous environment using electrochemical techniques. Corrosion 1996, 52:934-946.
95. Matsumura M. Erosion-corrosion of metallic materials in slurries. Corros. Rev 1994, 12:321-340.
96. Neville A., Hodgkiess T., Xu H. An electrochemical and microstructural assessment of erosion-corrosion of cast iron. Wear 1999, 235:523-534.
97. Glaeser W., Wright I.G. Metals Handbook 1986, 13. ASM International, Metals Park, Ohio, 'Corrosion'. 9th edition.
98. Wood R.J.K., Hutton S.P. The synergistic effect of erosion and corrosion: trends in published results. Wear 1990, 140:387-394.
99. Wood R.J.K., Wharton J.A., Speyer A.J., Tan K.S. Investigation of erosion-corrosion processes using electrochemical noise measurements. Tribol. Int 2002, 35(10):631-641.
100. Wood R.J.K., Speyer A.J. Erosion-corrosion of candidate HVOF aluminium-based marine coatings. Wear 2004, 256(5):545-556.
101. Wood R.J.K. Challenges of living with erosion-corrosion. Proceedings of the 2nd International Symposium on Advanced Materials for Fluid Machinery 2004, 113-132. Professional Engineering Publishing, London.
102. Wiklund U., Gunners J., Hogmark S. Influence of residual stresses on fracture and delamination of thin hard coatings. Wear 1999, 232:262-269.
103. Evans A.G., Hutchinson J.W. On the mechanics of delamination and spalling in compressed films. Int. J. Solids Structs 1984, 20:455-466.
104. Evans A.G., Drory M.D., Hu M.S. The cracking and decohesion of thin films. J. Mater. Res 1988, 3:1043-1049.
105. Kennedy F.E., Tang L. Factors affecting the sliding performance of titanium nitride coatings. in Mechanics of Coatings, Proceeding of the 16th Leeds-Lyon Symposium on Tribology 1990, 409-415. Elsevier Tribology Series, Elsevies, Amsterdam, Vol. 17. D. Dowson, C.M. Taylor, M. Godet (Eds.).
106. Wheeler D.W. Solid particle erosion of CVD diamond coatings 2001, PhD Thesis, School of Engineering Sciences, University of Southampton.
107. Thornton J.A., Hoffman D.W. Stress-related effects in thin films. Thin Solid Films 1989, 171:5-31.
108. Laribi M., Mesrati N., Vannes A.B., Treheux D. Adhesion and residual stresses determination of thermally sprayed molybdenum on steel. Sur. Coat. Technol 2003, 166(2-3):206-212.
109. Lugscheider E., Bobzin K., Hornig T., Maes A. Investigation of the residual stresses and mechanical properties of (Cr, Al)N arc PVD coatings used for semi-solid metal (SSM) forming dies. Thin Solid Films 2002, 420:318-323.
110. Costa A.K., Camargo S.S. Amorphous SiC coatings for WC cutting tools. Surf. Coat. Technol 2003, 163:176-180.
111. Godet M., Berthier Y., Leroy J.-M., Flamand L., Vincent L. Coating design methodology. in Mechanics of Coatings, Proceeding of the 16th Leeds-Lyon Symposium on Tribology 1990, 53-59. Elsevier, Amsterdam, Elsevier Tribology Series, Vol. 17,. D. Dowson, C.M. Taylor, M. Godet (Eds.).
112. Leroy J.-M., Floquet A., Villechaise B. Thermomechanical behavior of multilayered media - theory. Trans. ASME, J. Tribol 1989, 111:538-545.
113. Leroy J.-M., Villechaise B. Stress determination in elastic coatings and substrate under both normal and tangential loads. in Mechanics of Coatings, Proceedings of the 16th Leeds-Lyon Symposium on Tribology 1990, 195-201. Elsevier, Amsterdam, Elsevier Tribology Series, Vol. 17. D. Dowson, C.M. Taylor, M. Goder (Eds.).
114. Voevodin A.A., Iarve E.V., Ragland W., Zabinski J.S., Donaldson S. Stress analyses and in-situ fracture observation of wear protective multiplayer coatings in contact loading. Surf. Coat. technol 2001, 148:38-45.
115. Sobota J., Bochnicek Z., Holy V. Friction and wear properties of C-N/MeNx nanolayer composites. Thin Solid Films 2003, 433(1-2):155-159.
116. Lee K.W., Li D.J., Chung Y.W. Nanolayer coatings for hard disk and demanding tribological applications. Surf. Engng Mater. Sci 2003, 2:3-14.
117. Gorishnyy T.Z., Olson L.G., Oden M., Aouadi S.M., Rohde S.L. Optimization of wear-resistant coating architectures using finite element analysis. J. Vacuum Sci. Technol. A 2003, 21(1):332-339.
118. Holleck H., Schier V. Multilayer PVD coatings for wear protection. Surf. Coat. Technol 1995, 76-77(1):328-336.
119. Freud L.B., Suresh S. Thin Film Materials: Stress, Defect Formation and Surface Evolution 2003, Cambridge University Press, Cambridge.
120. Konig W., Fritsch R. Physically vapour-deposited coatings on cermets - performance and wear phenomena in interrupted cutting. Surf. Coat. Technol 1994, 68:747-754.
121. Oliveira S.A.G., Bower A.F. An analysis of fracture and delamination in thin coatings subjected to contact loading. Wear 1996, 198:15-32.
122. Bold P.E., Brown M.W., Allen R.J. A review of fatigue crack-growth in steels under mixed mode-I and mode-II loading. Fatigue Fracture Engng Mater. Structs 1992, 15(10):965-977.
123. Cannon D.F., Pradier H. Rail rolling contact fatigue - research by the European Rail Research Institute. Wear 1996, 191(1-2):1-13.
124. Wang L., Snidle R.W., Gu L. Rolling contact silicon nitride bearing technology: a review of recent research. Wear 2000, 246(1-2):159-173.
125. Wang L., Wood R.J.K., Harvey T.J., Morris S. Wear performance of oil lubricated silicon nitride sliding against various bearing steels. Wear 2003, 255(1-6):657-668.
126. Ahmed R., Hadfield M. Wear of high velocity oxy-fuel (HVOF)-coated cones in rolling contact. Wear 1997, 203-204:98-106.
127. Polonsky I.A., Chang T.P., Keer L.M., Sproul W.D. A study of rolling contact fatigue of bearing steel coated with physical vapour deposition TiN films: coating response to cyclic contact stress and physical mechanisms underlying coating effect on the fatigue life. Wear 1998, 215:191-204.
128. Hadfield M., Stolarski T.A. The effect of the test machine on the failure mode in lubricated rolling contact of silicon nitride. Tribol. Int 1995, 28(6):377-382.
129. Sethuramiah A. Lubricated Wear: Science and Technology, Vol. 42 2003, Elsevier, Amsterdam, Elsevier Tribology Series.
130. Stewart S., Ahmed R. Rolling contact fatigue of surface coatings - a review. Wear 2002, 253:1132-1144.