A review of dynamic experimental techniques and mechanical behaviour of rock materials

Rock Mechanics and Rock Engineering

Volumn 47, Issue 4, 2014, Pages 1411-1478

  Zhang, Q B ^a   Zhao, J ^a  

^a EPFL   (Switzerland)

Author keywords

Dynamic fracture; Dynamic loading; Experimental techniques; Mechanical behaviour; Rock dynamics; Rock material; Strain rate

Indexed keywords

BRITTLENESS; COMPRESSIVE STRENGTH; DYNAMIC ANALYSIS; DYNAMIC LOADS; DYNAMICS; FRACTURE MECHANICS; FRACTURE TESTING; FRACTURE TOUGHNESS; MECHANISMS; ROCKS; STRESS-STRAIN CURVES; TENSILE STRENGTH; TENSILE TESTING;

DYNAMIC FRACTURES; DYNAMIC LOADINGS; EXPERIMENTAL TECHNIQUES; MECHANICAL BEHAVIOUR; ROCK DYNAMICS; ROCK MATERIALS;

STRAIN RATE;

COMPRESSIVE STRENGTH; DEFORMATION; EXPERIMENTAL STUDY; LOADING TEST; MECHANICAL PROPERTY; ROCK MECHANICS; STRAIN RATE; STRESS ANALYSIS; STRESS-STRAIN RELATIONSHIP;

EID: 84903515348     PISSN: 07232632     EISSN: None     Source Type: Journal    
DOI: 10.1007/s00603-013-0463-y     Document Type: Review

References (384)

1. Agbabian MS (1985) Design of structures to resist nuclear weapons effects, vol 42. Revised edn. Manual 42 of the Committee on Dynamic Effects of the Structural Division of ASCE, New York
2. Ahrens TJ, Rubin AM (1993) Impact-induced tensional failure in rock. J Geophys Res 98(E1):1185-1203. doi: 10.1029/92je02679
3. Ai HA, Ahrens TJ (2006) Simulation of dynamic response of granite: a numerical approach of shock-induced damage beneath impact craters. Int J Impact Eng 33(1-12):1-10. doi: 10.1016/j.ijimpeng.2006.09.046
4. Albertini C, Cadoni E, Labibes K (1999) Study of the mechanical properties of plain concrete under dynamic loading. Exp Mech 39(2):137-141. doi: 10.1007/bf02331117
5. Alves M, Karagiozova D, Micheli GB, Calle MAG (2012) Limiting the influence of friction on the split Hopkinson pressure bar tests by using a ring specimen. Int J Impact Eng 49:130-141. doi: 10.1016/j.ijimpeng.2012.04.005
6. Ashby MF, Hallam SD (1986) The failure of brittle solids containing small cracks under compressive stress states. Acta Metall 34(3):497-510. doi: 10.1016/0001-6160(86)90086-6
7. Ashby MF, Sammis CG (1990) The damage mechanics of brittle solids in compression. Pure Appl Geophys 133(3):489-521. doi: 10.1007/bf00878002
8. ASM (2000) High strain rate tension and compression tests. ASM Handbook, Mechanical Testing and Evaluation ASM Int, Materials Park OH 8:429-446
9. Asprone D, Cadoni E, Prota A, Manfredi G (2009) Dynamic behavior of a Mediterranean natural stone under tensile loading. Int J Rock Mech Min 46(3):514-520. doi: 10.1016/j.ijrmms.2008.09.010
10. ASTM (2008a) D2936-08 Standard test method for direct tensile strength of intact rock core specimens. Annual book of ASTM standards. ASTM International, West Conshohocken
11. ASTM (2008b) D3967-08 Standard test method for splitting tensile strength of intact rock core specimens. Annual book of ASTM standards. ASTM International, West Conshohocken
12. ASTM (2011) E1820-11 Standard test method for measurement of fracture toughness. Annual book of ASTM standards. ASTM International, West Conshohocken
13. Atkinson BK (1982) Subcritical crack propagation in rocks: theory, experimental results and applications. J Struct Geol 4(1):41-56. doi: 10.1016/0191-8141(82)90005-0
14. Atkinson BK (1987) Introduction to fracture mechanics and its geophysical applications. In: Atkinson BK (ed) Fracture mechanics of rock. Academic, London, pp 1-26
15. Atkinson C, Smelser RE, Sanchez J (1982) Combined mode fracture via the cracked Brazilian disk test. Int J Fract 18(4):279-291. doi: 10.1007/bf00015688
16. Avril S, Bonnet M, Bretelle A-S, Grédiac M, Hild F, Ienny P, Latourte F, Lemosse D, Pagano S, Pagnacco E, Pierron F (2008) Overview of identification methods of mechanical parameters based on full-field measurements. Exp Mech 48(4):381-402. doi: 10.1007/s11340-008-9148-y
17. Backers T, Fardin N, Dresen G, Stephansson O (2003) Effect of loading rate on mode I fracture toughness, roughness and micromechanics of sandstone. Int J Rock Mech Min 40(3):425-433. doi: 10.1016/s1365-1609(03)00015-7
18. Banadaki MMD, Mohanty B (2012) Numerical simulation of stress-wave induced fractures in rock. Int J Impact Eng 40-41:16-25. doi: 10.1016/j.ijimpeng.2011.08.010
19. Barla G, Zhao J (2010) Special issue: rock dynamics and earthquake engineering. Rock Mech Rock Eng 43(6):655-960. doi: 10.1007/s00603-010-0120-7
20. Bazant ZP, Bai SP, Gettu R (1993) Fracture of rock: effect of loading rate. Eng Fract Mech 45(3):393-398. doi: 10.1016/0013-7944(93)90024-m
21. Bertram A, Kalthoff JF (2003) Crack propagation toughness of rock for the range of low to very high crack speeds. Key Eng Mater 251-252:423-430. doi: 10.4028/www.scientific.net/KEM.251-252.423
22. Bhat HS, Rosakis AJ, Sammis CG (2012) A micromechanics based constitutive model for brittle failure at high strain rates. J Appl Mech 79(3):031016. doi: 10.1115/1.4005897
23. Bieniawski ZT (1967a) Mechanism of brittle fracture of rock: part I theory of the fracture process. Int J Rock Mech Min Sci Geomech Abstr 4(4):395-406. doi: 10.1016/0148-9062(67)90030-7
24. Bieniawski ZT (1967b) Stability concept of brittle fracture propagation in rock. Eng Geol 2(3):149-162. doi: 10.1016/0013-7952(67)90014-2
25. Bieniawski ZT (1968) Fracture dynamics of rock. Int J Fract Mech 4(4):415-430. doi: 10.1007/bf00186807
26. Bindiganavile V, Banthia N (2006) Size effects and the dynamic response of plain concrete. J Mater Civ Eng 18(4):485-491. doi: 10.1061/(ASCE)0899- 1561(2006)18:4(485)
27. Bischoff P, Perry S (1991) Compressive behaviour of concrete at high strain rates. Mater Struct 24(6):425-450. doi: 10.1007/bf02472016
28. -1 in triaxial compression tests on three rocks. Int J Rock Mech Min Sci Geomech Abstr 18(1):47-62. doi: 10.1016/0148-9062(81)90265-5
29. Bohloli B (1997) Effects of the geological parameters on rock blasting using the Hopkinson split bar. Int J Rock Mech Min 34(3-4):32.e31-32.e39. doi: 10.1016/s1365-1609(97)00228-1
30. Bonamy D, Bouchaud E (2011) Failure of heterogeneous materials: a dynamic phase transition? Phys Rep 498(1):1-44. doi: 10.1016/j.physrep.2010.07.006
31. Brace WF, Bombolakis EG (1963) A note on brittle crack growth in compression. J Geophys Res 68(12):3709-3713. doi: 10.1029/JZ068i012p03709
32. Brace WF, Jones AH (1971) Comparison of uniaxial deformation in shock and static loading of three rocks. J Geophys Res 76(20):4913-4921. doi: 10.1029/JB076i020p04913
33. Braithwaite C (2009) High strain rate properties of geological materials. PhD., University of Cambridge, Cambridge
34. Bratov V, Morozov NF, Petrov Y (2009) Dynamic strength of continuum. St.-Petersburg University Press, St.-Petersburg
35. Budiansky B, O'Connell RJ (1976) Elastic moduli of a cracked solid. Int J Solids Struct 12(2):81-97. doi: 10.1016/0020-7683(76)90044-5
36. Cadoni E (2010) Dynamic characterization of orthogneiss rock subjected to intermediate and high strain rates in tension. Rock Mech Rock Eng 43(6):667-676. doi: 10.1007/s00603-010-0101-x
37. Cadoni E, Albertini C (2011) Modified Hopkinson bar technologies applied to the high strain rate rock tests. In: Zhou YX, Zhao J (eds) Advances in rock dynamics and applications. CRC Press, USA, pp 79-104
38. Cai M, Liu D (2009) Study of failure mechanisms of rock under compressive-shear loading using real-time laser holography. Int J Rock Mech Min 46(1):59-68. doi: 10.1016/j.ijrmms.2008.03.010
39. Cai M, Kaiser PK, Suorineni F, Su K (2007) A study on the dynamic behavior of the Meuse/Haute-Marne argillite. Phys Chem Earth 32(8-14):907-916. doi: 10.1016/j.pce.2006.03.007
40. Campbell J, Dowling AR (1970) The behaviour of materials subjected to dynamic incremental shear loading. J Mech Phys Solids 18(1):43-63. doi: 10.1016/0022-5096(70)90013-x
41. Carmona S, Aguado A (2012) New model for the indirect determination of the tensile stress-strain curve of concrete by means of the Brazilian test. Mater Struct 45(10):1473-1485. doi: 10.1617/s11527-012-9851-0
42. Carosena M, Giovanni MC (2004) Recent advances in the use of infrared thermography. Meas Sci Technol 15(9):R27. doi: 10.1088/0957-0233/15/9/R01
43. o187, CEB Comité Euro-International du Béton, Lausanne
44. Chang S-H, Lee C-I, Jeon S (2002) Measurement of rock fracture toughness under modes I and II and mixed-mode conditions by using disc-type specimens. Eng Geol 66(1-2):79-97. doi: 10.1016/s0013-7952(02)00033-9
45. Chen EP (1999) Non-local effects on dynamic damage accumulation in brittle solids. Int J Numer Anal Meth Geomech 23(1):1-21. doi: 10.1002/(sici)1096-9853(199901)23:1<1:aid-nag892>3.0.co;2-r
46. Chen W, Ravichandran G (1996) An experimental technique for imposing dynamic multiaxial-compression with mechanical confinement. Exp Mech 36(2):155-158. doi: 10.1007/bf02328712
47. Chen W, Ravichandran G (1997) Dynamic compressive failure of a glass ceramic under lateral confinement. J Mech Phys Solids 45(8):1303-1328. doi: 10.1016/s0022-5096(97)00006-9
48. Chen WW, Song B (2011) Split Hopkinson (Kolsky) bar: design, testing and applications. Springer, New York
49. Chen WW, Rajendran AM, Song B, Nie X (2007) Dynamic fracture of ceramics in armor applications. J Am Ceram Soc 90(4):1005-1018. doi: 10.1111/j.1551-2916. 2007.01515.x
50. Chen R, Xia K, Dai F, Lu F, Luo SN (2009) Determination of dynamic fracture parameters using a semi-circular bend technique in split Hopkinson pressure bar testing. Eng Fract Mech 76(9):1268-1276. doi: 10.1016/j. engfracmech.2009.02.001
51. Chen G, Kuang YC, Huang XC, Xu AM (2011) Dynamic compressive behavior of granite under active confinement. Adv Mater Res 291-294:1227-1232. doi: 10.4028/www.scientific.net/AMR.291-294.1227
52. Cho SH, Ogata Y, Kaneko K (2003) Strain-rate dependency of the dynamic tensile strength of rock. Int J Rock Mech Min 40(5):763-777. doi: 10.1016/s1365-1609(03)00072-8
53. Cho SH, Kubota TS, Ogata Y, Yokota M, Kaneko K (2005) Microscopic visualization of a granitic rock subject to dynamic tensile loading by using a micro X-ray CT system. Sci Technol Energ Mater 66(4):334-339
54. Chong KP, Boresi AP (1990) Strain rate dependent mechanical properties of New Albany reference shale. Int J Rock Mech Min Sci Geomech Abstr 27(3):199-205. doi: 10.1016/0148-9062(90)94328-q
55. Chong KP, Kuruppu MD (1984) New specimen for fracture toughness determination for rock and other materials. Int J Fract 26(2):R59-R62. doi: 10.1007/bf01157555
56. Chong KP, Hoyt PM, Smith JW, Paulsen BY (1980) Effects of strain rate on oil shale fracturing. Int J Rock Mech Min Sci Geomech Abstr 17(1):35-43. doi: 10.1016/0148-9062(80)90004-2
57. Christensen R, Swanson S, Brown W (1972) Split-Hopkinson-bar tests on rock under confining pressure. Exp Mech 12(11):508-513. doi: 10.1007/bf02320747
58. Costin LS (1981) Static and dynamic fracture behaviour of oil shale. In: Freiman SW, Fuller ER (eds) Fracture mechanics for ceramics, rock and concrete, ASTM STP 745, vol 745. American Society for Testing and Materials, USA, pp 169-184
59. Cotsovos DM, Pavlovic MN (2008) Numerical investigation of concrete subjected to high rates of uniaxial tensile loading. Int J Impact Eng 35(5):319-335. doi: 10.1016/j.ijimpeng.2007.03.006
60. Coviello A, Lagioia R, Nova R (2005) On the measurement of the tensile strength of soft rocks. Rock Mech Rock Eng 38(4):251-273. doi: 10.1007/s00603-005-0054-7
61. Curbach M, Eibl J (1990) Crack velocity in concrete. Eng Fract Mech 35(1-3):321-326. doi: 10.1016/0013-7944(90)90210-8
62. Dai F, Xia K (2010) Loading rate dependence of tensile strength anisotropy of Barre granite. Pure Appl Geophys 167(11):1419-1432. doi: 10.1007/s00024-010-0103-3
63. Dai F, Xia KW (2013) Laboratory measurements of the rate dependence of the fracture toughness anisotropy of Barre granite. Int J Rock Mech Min 60:57-65. doi: 10.1016/j.ijrmms.2012.12.035
64. Dai F, Xia K, Luo SN (2008) Semicircular bend testing with split Hopkinson pressure bar for measuring dynamic tensile strength of brittle solids. Rev Sci Instrum 79(12):123903-123906. doi: 10.1063/1.3043420
65. Dai F, Chen R, Iqbal MJ, Xia K (2010a) Dynamic cracked chevron notched Brazilian disc method for measuring rock fracture parameters. Int J Rock Mech Min 47(4):606-613. doi: 10.1016/j.ijrmms.2010.04.002
66. Dai F, Chen R, Xia K (2010b) A semi-circular bend technique for determining dynamic fracture toughness. Exp Mech 50(6):783-791. doi: 10.1007/s11340-009-9273-2
67. Dai F, Xia K, Tang L (2010c) Rate dependence of the flexural tensile strength of Laurentian granite. Int J Rock Mech Min 47(3):469-475. doi: 10.1016/j.ijrmms.2009.05.001
68. Dai F, Huang S, Xia K, Tan Z (2010c) Some fundamental issues in dynamic compression and tension tests of rocks using split Hopkinson pressure bar. Rock Mech Rock Eng 43(6):657-666. doi: 10.1007/s00603-010-0091-8
69. Dai F, Xia K, Zheng H, Wang YX (2011) Determination of dynamic rock mode-I fracture parameters using cracked chevron notched semi-circular bend specimen. Eng Fract Mech 78(15):2633-2644. doi: 10.1016/j.engfracmech.2011.06. 022
70. Dai F, Xia K, Zuo JP, Zhang R, Xu NW (2013) Static and dynamic flexural strength anisotropy of Barre granite. Rock Mech Rock Eng. doi: 10.1007/s00603-013-0390-y
71. Daniel IM, Rowlands RE (1975) On wave and fracture propagation in rock media. Exp Mech 15(12):449-457. doi: 10.1007/bf02318359
72. Davies EDH, Hunter SC (1963) The dynamic compression testing of solids by the method of the split Hopkinson pressure bar. J Mech Phys Solids 11(3):155-179. doi: 10.1016/0022-5096(63)90050-4
73. Deganis LE, Zuo QH (2011) Crack-mechanics based brittle damage model including nonlinear equation of state and porosity growth. J Appl Phys 109(7):073504-073511. doi: 10.1063/1.3562140
74. Deng H, Nemat-Nasser S (1992) Dynamic damage evolution in brittle solids. Mech Mater 14(2):83-103. doi: 10.1016/0167-6636(92)90008-2
75. Deshpande VS, Evans AG (2008) Inelastic deformation and energy dissipation in ceramics: a mechanism-based constitutive model. J Mech Phys Solids 56(10):3077-3100. doi: 10.1016/j.jmps.2008.05.002
76. Deshpande VS, Gamble EAN, Compton BG, McMeeking RM, Evans AG, Zok FW (2011) A constitutive description of the inelastic response of ceramics. J Am Ceram Soc 94:S204-S214. doi: 10.1111/j.1551-2916.2011.04516.x
77. Desmorat R, Chambart M, Gatuingt F, Guilbaud D (2010) Delay-active damage versus non-local enhancement for anisotropic damage dynamics computations with alternated loading. Eng Fract Mech 77(12):2294-2315. doi: 10.1016/j.engfracmech. 2010.04.006
78. Dienes JK (1985) A statistical theory of fragmentation processes. Mech Mater 4(3-4):325-335. doi: 10.1016/0167-6636(85)90030-4
79. Doan M-L, Billi A (2011) High strain rate damage of Carrara marble. Geophys Res Lett 38(19):L19302. doi: 10.1029/2011gl049169
80. Doan M-L, Gary G (2009) Rock pulverization at high strain rate near the San Andreas fault. Nat Geosci 2(10):709-712. doi: 10.1038/ngeo640
81. Dong S, Wang Y, Xia Y (2004) Stress intensity factors for central cracked circular disk subjected to compression. Eng Fract Mech 71(7-8):1135-1148. doi: 10.1016/s0013-7944(03)00120-6
82. Dong S, Wang Y, Xia Y (2006) A finite element analysis for using Brazilian disk in split Hopkinson pressure bar to investigate dynamic fracture behavior of brittle polymer materials. Polym Test 25(7):943-952. doi: 10.1016/j.polymertesting.2006.06.003
83. Dubé JF, Pijaudier-Cabot G, La Borderie C (1996) Rate dependent damage model for concrete in dynamics. J Eng Mater-T ASME 122(10):939-947. doi: 10.1061/(ASCE)0733-9399(1996)122:10(939
84. Dumont D, Deschamps A, Brechet Y (2004) A model for predicting fracture mode and toughness in 7000 series aluminium alloys. Acta Mater 52(9):2529-2540. doi: 10.1016/j.actamat.2004.01.044
85. Dutta PK, Kim K (1993) High-strain-rate tensile behavior of sedimentary and igneous rocks at low temperatures. U.S. Army Corps of Engineers, Cold Regions Research & Engineering Laboratory
86. Ehrgott JQ, Sloan RC (1971) Development of a dynamic high-pressure triaxial test device. U.S. Army Engineer Waterways Experiment Station, Vicksburg
87. Ellwood S, Griffiths LJ, Parry DJ (1982) Materials testing at high constant strain rates. J Phys E Sci Instrum 15(3):280. doi: 10.1088/0022-3735/ 15/3/009
88. Erzar B, Forquin P (2010) An experimental method to determine the tensile strength of concrete at high rates of strain. Exp Mech 50(7):941-955. doi: 10.1007/s11340-009-9284-z
89. Fahrenthold EP (1991) A continuum damage model for fracture of brittle solids under dynamic loading. J Appl Mech 58(4):904-909. doi: 10.1115/1.2897704
90. Fairhurst CE, Hudson JA (1999) Draft ISRM suggested method for the complete stress-strain curve for intact rock in uniaxial compression. Int J Rock Mech Min 36(3):279-289. doi: 10.1016/s0148-9062(99)00006-6
91. Fang Q, Ruan Z, Zhai C, Jiang X, Chen L, Fang W (2012) Split Hopkinson pressure bar test and numerical analysis of salt rock under confining pressure and temperature. Chin J Rock Mech Eng 31(9):1756-1765
92. Field JE, Walley SM, Proud WG, Goldrein HT, Siviour CR (2004) Review of experimental techniques for high rate deformation and shock studies. Int J Impact Eng 30(7):725-775. doi: 10.1016/j.ijimpeng.2004.03.005
93. Fischer MP, Elsworth D, Alleyamp RB, Engelder T (1996) Finite element analysis of the modified ring test for determining mode I fracture toughness. Int J Rock Mech Min 33(5):1-15. doi: 10.1016/0148-9062(96)89926-8
94. Follansbee PS, Frantz C (1983) Wave propagation in the split Hopkinson pressure bar. J Eng Mater-T ASME 105(1):61-66. doi: 10.1115/1.3225620
95. Forquin P (2012) An optical correlation technique for characterizing the crack velocity in concrete. Eur Phys J Spec Top 206:89-95. doi: 10.1140/epjst/e2012-01590-6
96. Forquin P, Gary G, Gatuingt F (2008) A testing technique for concrete under confinement at high rates of strain. Int J Impact Eng 35(6):425-446. doi: 10.1016/j.ijimpeng.2007.04.007
97. Forrestal MJ, Wright TW, Chen W (2007) The effect of radial inertia on brittle samples during the split Hopkinson pressure bar test. Int J Impact Eng 34(3):405-411. doi: 10.1016/j.ijimpeng.2005.12.001
98. Foster JT (2012) Comments on the validity of test conditions for Kolsky bar testing of elastic-brittle materials. Exp Mech 52(9):1559-1563. doi: 10.1007/s11340-012-9592-6
99. Fowell RJ (1995) Suggested method for determining mode I fracture toughness using cracked chevron notched Brazilian disc (CCNBD) specimens. Int J Rock Mech Min 32(1):57-64. doi: 10.1016/0148-9062(94)00015-u
100. Frew D, Forrestal M, Chen W (2001) A split Hopkinson pressure bar technique to determine compressive stress-strain data for rock materials. Exp Mech 41(1):40-46. doi: 10.1007/bf02323102
101. Frew D, Forrestal M, Chen W (2002) Pulse shaping techniques for testing brittle materials with a split Hopkinson pressure bar. Exp Mech 42(1):93-106. doi: 10.1007/bf02411056
102. Frew DJ, Akers SA, Chen W, Green ML (2010) Development of a dynamic triaxial Kolsky bar. Meas Sci Technol 21(10):105704. doi: 10.1088/0957-0233/21/ 10/105704
103. Friedman M, Logan JM (1973) Lüders' bands in experimentally deformed sandstone and limestone. Geol Soc Am Bull 84(4):1465-1476. doi: 10.1130/0016-7606(1973)84<1465:lbieds>2.0.co;2
104. Friedman M, Perkins RD, Green SJ (1970) Observation of brittle-deformation features at the maximum stress of Westerly granite and Solnhofen limestone. Int J Rock Mech Min Sci Geomech Abstr 7(3):297-302. doi: 10.1016/0148-9062(70)90043-4
105. Fu HC, Erki MA, Seckin M (1991) Review of effects of loading rate on concrete in compression. J Struct Eng 117(12):3645-3659. doi: 10.1061/(asce)0733-9445(1991)117:12(3645)
106. Fukui K, Okubo S, Ogawa A (2004) Some aspects of loading-rate dependency of Sanjome andesite strengths. Int J Rock Mech Min 41(7):1215-1219. doi: 10.1016/j.ijrmms.2004.06.001
107. Gálvez F, Rodríguez J, Sánchez V (2002) The spalling of long bars as a reliable method of measuring the dynamic tensile strength of ceramics. Int J Impact Eng 27(2):161-177. doi: 10.1016/S0734-743X(01)00039-2
108. Gama BA, Lopatnikov SL, Gillespie JW (2004) Hopkinson bar experimental technique: a critical review. Appl Mech Rev 57(4):223-250. doi: 10.1115/1.1704626
109. Gary G, Bailly P (1998) Behaviour of quasi-brittle material at high strain rate. Experiment and modelling. Eur J Mech A Solids 17(3):403-420. doi: 10.1016/s0997-7538(98)80052-1
110. Gerlach R, Sathianathan SK, Siviour C, Petrinic N (2011) A novel method for pulse shaping of split Hopkinson tensile bar signals. Int J Impact Eng 38(12):976-980. doi: 10.1016/j.ijimpeng.2011.08.007
111. Gilat A (2000) Torsional Kolsky bar testing. ASM handbook, mechanical testing and evaluation. ASM International, Materials Park OH 8:505-515
112. Gilat A, Matrka TA (2011) A new compression intermediate strain rate testing apparatus. In: Proulx T (ed) The Society for Experimental Mechanics series, dynamic behavior of materials. Springer, New York, pp 425-429. doi: 10.1007/978-1-4419-8228-5-64
113. Gilat A, Schmidt T, Walker A (2009) Full field strain measurement in compression and tensile split Hopkinson bar experiments. Exp Mech 49(2):291-302. doi: 10.1007/s11340-008-9157-x
114. Glenn LA, Jaun H (1978) Crack propagation in rock plates loaded by projectile impact. Exp Mech 18(1):35-40. doi: 10.1007/bf02326555
115. Goldsmith W, Sackman JL, Ewerts C (1976) Static and dynamic fracture strength of Barre granite. Int J Rock Mech Min Sci Geomech Abstr 13(11):303-309. doi: 10.1016/0148-9062(76)91829-5
116. Gomez JT, Shukla A, Sharma A (2001) Static and dynamic behavior of concrete and granite in tension with damage. Theor Appl Fract Mech 36(1):37-49. doi: 10.1016/s0167-8442(01)00054-4
117. Gomez JT, Shukla A, Sharma A (2002) Photoelastic evaluation of stress fields and fracture during dynamic splitting experiments. J Test Eval 30(3):186-196. doi: 10.1520/JTE12306J
118. Gong J, Malvern L (1990) Passively confined tests of axial dynamic compressive strength of concrete. Exp Mech 30(1):55-59. doi: 10.1007/bf02322703
119. Gong JC, Malvern LE, Jenkins DA (1990) Dispersion investigation in the split Hopkinson pressure bar. J Eng Mater-T ASME 112(3):309-314. doi: 10.1115/1.2903329
120. Gorham DA (1983) A numerical method for the correction of dispersion in pressure bar signals. Phys E Sci Instrum 16(6):477. doi: 10.1088/0022-3735/16/6/ 008
121. Gorham DA (1989) Specimen inertia in high strain-rate compression. J Phys D Appl Phys 22(12):1888. doi: 10.1088/0022-3727/22/12/014
122. Gorham DA, Pope PH, Field JE (1992) An improved method for compressive stress-strain measurements at very high strain rates. Proc R Soc Lond A 438(1902):153-170. doi: 10.1098/rspa.1992.0099
123. Grady DE (1982) Local inertial effects in dynamic fragmentation. J Appl Phys 53(1):322-325. doi: 10.1063/1.329934
124. Grady DE, Kipp ME (1987) Dynamic rock fragmentation. In: Atkinson BK (ed) Fracture mechanics of rock. Academic, London, pp 429-475
125. Grady DE, Lipkin J (1980) Criteria for impulsive rock fracture. Geophys Res Lett 7(4):255. doi: 10.1029/GL007i004p00255
126. Gran J, Florence A, Colton J (1989) Dynamic triaxial tests of high-strength concrete. J Eng Mech 115(5):891-904. doi: 10.1061/(ASCE)0733- 9399(1989)115:5(891
127. Grantham SG, Siviour CR, Proud WG, Field JE (2004) High-strain rate Brazilian testing of an explosive simulant using speckle metrology. Meas Sci Technol 15(9):1867. doi: 10.1088/0957-0233/15/9/025
128. Gray GT III (2000) Classic split Hopkinson pressure bar testing. ASM handbook, mechanical testing and evaluation. ASM International, Materials Park OH 8:462-476
129. Green SJ, Perkins RD (1968) Uniaxial compression tests at varying strain rates on three geologic materials. The 10th U.S. Symposium on Rock Mechanics (USRMS), Austin, TX
130. Green S, Leasia J, Perkins R, Jones A (1972) Triaxial stress behavior of Solnhofen limestone and Westerly granite at high strain rates. J Geophys Res 77(20):3711-3724. doi: 10.1029/JB077i020p03711
131. Hadraba H, Němec O, Dlouhy I (2008) Conversion of transgranular to intergranular fracture in NiCr steels. Eng Fract Mech 75(12):3677-3691. doi: 10.1016/j.engfracmech.2007.08.006
132. Haimson B, Bobet A (2012) Introduction to suggested methods for failure criteria. Rock Mech Rock Eng 45(6):973-974. doi: 10.1007/s00603-012-0274-6
133. Hakalehto KO (1967) A study of the dynamic behaviour of rock using the Hopkinson split bar method. M.S., University of Minnesota, Minneapolis
134. Hakalehto KO (1969) The behaviour of rock under impulse loads: a study using the Hopkinson split bar method. Acta Polytech Scand, Chem Technol Ser 81:1-60
135. Hakalehto KO (1970) Brittle fracture of rocks under impulse loads. Int J Fract 6(3):249-256. doi: 10.1007/bf00212655
136. Hao Y, Hao H (2013) Numerical investigation of the dynamic compressive behaviour of rock materials at high strain rate. Rock Mech Rock Eng 46(2):373-388. doi: 10.1007/s00603-012-0268-4
137. Hartley CS (2008) Materials science for the experimental mechanist. In: Sharpe WN (ed) Springer handbook of experimental solid mechanics. Springer, US, pp 17-48. doi: 10.1007/978-0-387-30877-7-2
138. Hartley RS, Cloete TJ, Nurick GN (2007) An experimental assessment of friction effects in the split Hopkinson pressure bar using the ring compression test. Int J Impact Eng 34(10):1705-1728. doi: 10.1016/j.ijimpeng.2006.09.003
139. Hauser F (1966) Techniques for measuring stress-strain relations at high strain rates. Exp Mech 6(8):395-402. doi: 10.1007/bf02326284
140. Heard HC (1963) Effect of large changes in strain rate in the experimental deformation of Yule marble. J Geol 71(2):162-195. doi: 10.1086/626892
141. Hogan JD, Rogers RJ, Spray JG, Boonsue S (2012) Dynamic fragmentation of granite for impact energies of 6-28 J. Eng Fract Mech 79:103-125. doi: 10.1016/j.engfracmech.2011.10.006
142. Holloway DC, Patacca AM, Fourney WL (1977) Application of holographic interferometry to a study of wave propagation in rock. Exp Mech 17(8):281-289. doi: 10.1007/bf02324957
143. Hong L, Zhou Z, Yin T, Liao G, Ye Z (2009) Energy consumption in rock fragmentation at intermediate strain rate. J Cent South Univ Technol 16(4):677-682. doi: 10.1007/s11771-009-0112-5
144. Howe S, Goldsmith W, Sackman J (1974) Macroscopic static and dynamic mechanical properties of Yule marble. Exp Mech 14(9):337-346. doi: 10.1007/bf02323559
145. Hu G, Ramesh KT, Cao B, McCauley JW (2011) The compressive failure of aluminium nitride considered as a model advanced ceramic. J Mech Phys Solids 59(5):1076-1093. doi: 10.1016/j.jmps.2011.02.003
146. Huang C, Subhash G (2003) Influence of lateral confinement on dynamic damage evolution during uniaxial compressive response of brittle solids. J Mech Phys Solids 51(6):1089-1105. doi: 10.1016/s0022-5096(03)00002-4
147. Huang C, Subhash G, Vitton SJ (2002) A dynamic damage growth model for uniaxial compressive response of rock aggregates. Mech Mater 34(5):267-277. doi: 10.1016/s0167-6636(02)00112-6
148. Huang S, Chen R, Xia KW (2010a) Quantification of dynamic tensile parameters of rocks using a modified Kolsky tension bar apparatus. J Rock Mech Geotech Eng 2:162-168. doi: 10.3724/SP.J.1235.2010.00162
149. Huang S, Xia K, Yan F, Feng X (2010b) An experimental study of the rate dependence of tensile strength softening of Longyou sandstone. Rock Mech Rock Eng 43(6):677-683. doi: 10.1007/s00603-010-0083-8
150. Huang S, Feng XT, Xia K (2011a) A dynamic punch method to quantify the dynamic shear strength of brittle solids. Rev Sci Instrum 82(5):053901-053905. doi: 10.1063/1.3585983
151. Huang S, Luo SN, Tatone B, Xia K (2011b) Dynamic fracture tests of PMMA using a dynamic semi-circular bend technique. J Mech Mater Struct 6(6):813-836. doi: 10.2140/jomms.2011.6.813
152. Huang S, Xia K, Dai F (2012) Establishment of a dynamic Mohr-Coulomb failure criterion for rocks. Int J Nonlin Sci Numer Simul 13(1):55-60. doi: 10.1515/ijnsns.2011.120
153. Hughes ML, Tedesco JW, Ross CA (1993) Numerical analysis of high strain rate splitting-tensile tests. Comput Struct 47(4-5):653-671. doi: 10.1016/0045-7949(93)90349-i
154. Islam MT, Bindiganavile V (2012) Stress rate sensitivity of Paskapoo sandstone under flexure. Can J Civ Eng 39(11):1184-1192. doi: 10.1139/l2012-101
155. ISRM (1978) Suggested methods for determining tensile strength of rock materials. Int J Rock Mech Min Sci Geomech Abstr 15(3):99-103. doi: 10.1016/0148-9062(78)90003-7
156. ISRM (1979) Suggested methods for determining the uniaxial compressive strength and deformability of rock materials. Int J Rock Mech Min Sci Geomech Abstr 16(2):135-140. doi: 10.1016/0148-9062(79)91451-7
157. ISRM (1983) Suggested methods for determining the strength of rock materials in triaxial compression: revised version. Int J Rock Mech Min Sci Geomech Abstr 20(6):285-290. doi: 10.1016/0148-9062(83)90598-3
158. Iwamoto T, Yokoyama T (2012) Effects of radial inertia and end friction in specimen geometry in split Hopkinson pressure bar tests: a computational study. Mech Mater 51:97-109. doi: 10.1016/j.mechmat.2012.04.007
159. Jaeger JC (1967) Failure of rocks under tensile conditions. J Rock Mech Min Sci Geomech Abst 4(2):219-227. doi: 10.1016/0148-9062(67)90046-0
160. Janach W (1976) The role of bulking in brittle failure of rocks under rapid compression. Int J Rock Mech Min Sci Geomech Abstr 13(6):177-186. doi: 10.1016/0148-9062(76)91284-5
161. Jia D, Ramesh K (2004) A rigorous assessment of the benefits of miniaturization in the Kolsky bar system. Exp Mech 44(5):445-454. doi: 10.1007/bf02427955
162. Jiang F, Vecchio KS (2009) Hopkinson bar loaded fracture experimental technique: a critical review of dynamic fracture toughness tests. Appl Mech Rev 62(6):060802-060839. doi: 10.1115/1.3124647
163. Jin JF, Li XB, Wang GS, Yin ZQ (2012) Failure modes and mechanisms of sandstone under cyclic impact loadings. J Cent South Univ Technol 43(4):1453-1461
164. Johnson GR, Holmquist TJ (1992) A computational constitutive model for brittle materials subjected to large strains, high strain rates and high pressures. In: Meyers MA, Murr LE, Staudhammer KP (eds) Shock-wave and high strain-rate phenomena in materials. Marcel-Dekker, New York, pp 1075-1081
165. Johnson GR, Holmquist TJ (1994) An improved computational constitutive model for brittle materials. AIP Conf Proc 309(1):981-984. doi: 10.1063/1.46199
166. Johnstone C, Ruiz C (1995) Dynamic testing of ceramics under tensile stress. Int J Solids Struct 32(17-18):2647-2656. doi: 10.1016/0020-7683(94) 00287-7
167. Ju JW (1989) On energy-based coupled elastoplastic damage theories: constitutive modeling and computational aspects. Int J Solids Struct 25(7):803-833. doi: 10.1016/0020-7683(89)90015-2
168. Ju Y, Sudak L, Xie H (2007) Study on stress wave propagation in fractured rocks with fractal joint surfaces. Int J Solids Struct 44(13):4256-4271. doi: 10.1016/j.ijsolstr.2006.11.015
169. Kachanov LM (1958) Time of the rupture process under creep conditions. Izv Akad Nauk SSSR, Otd Tekh Nauk 8:26-31
170. Kalthoff JF (1985) On the measurement of dynamic fracture toughnesses: a review of recent work. Int J Fract 27(3):277-298. doi: 10.1007/bf00017973
171. Kazerani T, Zhao J (2010) Micromechanical parameters in bonded particle method for modelling of brittle material failure. Int J Numer Anal Meth Geomech 34(18):1877-1895. doi: 10.1002/nag.884
172. Khan AS, Irani FK (1987) An experimental study of stress wave transmission at a metallic-rock interface and dynamic tensile failure of sandstone, limestone, and granite. Mech Mater 6(4):285-292. doi: 10.1016/0167-6636(87)90027-5
173. Khokhlov M, Fischer A, Rittel D (2012) Multi-scale stereo-photogrammetry system for fractographic analysis using scanning electron microscopy. Exp Mech 52(8):975-991. doi: 10.1007/s11340-011-9582-0
174. Kimberley J, Ramesh KT (2011) The dynamic strength of an ordinary chondrite. Meteor Planet Sci 46(11):1653-1669. doi: 10.1111/j.1945-5100.2011. 01254.x
175. Klepaczko JR (1990) Behavior of rock-like materials at high strain rates in compression. Int J Plast 6(4):415-432. doi: 10.1016/0749-6419(90)90011-3
176. Klepaczko JR, Brara A (2001) An experimental method for dynamic tensile testing of concrete by spalling. Int J Impact Eng 25(4):387-409. doi: 10.1016/s0734-743x(00)00050-6
177. Klepaczko JR, Bassim MN, Hsu TR (1984) Fracture toughness of coal under quasi-static and impact loading. Eng Fract Mech 19(2):305-316. doi: 10.1016/0013-7944(84)90025-0
178. Kolsky H (1949) An investigation of the mechanical properties of materials at very high rates of loading. Proc Phys Soc B 62(11):676. doi: 10.1088/0370-1301/62/11/302
179. Kraft RH, Molinari JF (2008) A statistical investigation of the effects of grain boundary properties on transgranular fracture. Acta Mater 56(17):4739-4749. doi: 10.1016/j.actamat.2008.05.036
180. Kubota S, Ogata Y, Wada Y, Simangunsong G, Shimada H, Matsui K (2008) Estimation of dynamic tensile strength of sandstone. Int J Rock Mech Min 45(3):397-406. doi: 10.1016/j.ijrmms.2007.07.003
181. Kuhn H, Medlin D (2000) High strain rate testing. ASM handbook, mechanical testing and evaluation. ASM International, Materials Park OH 8:427-559
182. Kumar A (1968) The effect of stress rate and temperature on the strength of basalt and granite. Geophysics 33(3):501-510. doi: 10.1190/1.1439947
183. Kuruppu MD (1997) Fracture toughness measurement using chevron notched semi-circular bend specimen. Int J Fract 86(4):L33-L38
184. Kuruppu MD, Obara Y, Ayatollahi MR, Chong KP, Funatsu T (2013) ISRM-Suggested method for determining the mode I static fracture toughness using semi-circular bend specimen. Rock Mech Rock Eng. doi: 10.1007/s00603-013-0422-7
185. Lagunov VA, Mambetov SA (1965) The rate of growth of cracks in rock specimens. J Appl Mech Tech Phys 6(6):64-66. doi: 10.1007/bf00919315
186. Lambert DE, Ross AC (2000) Strain rate effects on dynamic fracture and strength. Int J Impact Eng 24(10):985-998. doi: 10.1016/s0734-743x(00)00027-0
187. Lankford JJ (1976) Dynamic strength of oil shale. Soc Petrol Eng J 16(1):17-22
188. Lankford J (1981) The role of tensile microfracture in the strain rate dependence of compressive strength of fine-grained limestone-analogy with strong ceramics. Int J Rock Mech Min Sci Geomech Abstr 18:173-175. doi: 10.1016/0148-9062(81)90742-7
189. Li QM, Meng H (2003) About the dynamic strength enhancement of concrete-like materials in a split Hopkinson pressure bar test. Int J Solids Struct 40(2):343-360. doi: 10.1016/s0020-7683(02)00526-7
190. Li Y, Ramesh KT (2007) An optical technique for measurement of material properties in the tension Kolsky bar. Int J Impact Eng 34(4):784-798. doi: 10.1016/j.ijimpeng.2005.12.002
191. Li XB, Lai HH, Gu DS (1993) Energy absorption of rock fragmentation under impulsive loads with different wave forms. Trans Nonferr Metal Soc 3(1):1-5-9
192. Li HB, Zhao J, Li TJ (1999) Triaxial compression tests on a granite at different strain rates and confining pressures. Int J Rock Mech Min 36(8):1057-1063. doi: 10.1016/s1365-1609(99)00120-3
193. Li HB, Zhao J, Li TJ (2000a) Micromechanical modelling of the mechanical properties of a granite under dynamic uniaxial compressive loads. Int J Rock Mech Min 37(6):923-935. doi: 10.1016/s1365-1609(00)00025-3
194. Li XB, Lok TS, Zhao J, Zhao PJ (2000b) Oscillation elimination in the Hopkinson bar apparatus and resultant complete dynamic stress-strain curves for rocks. Int J Rock Mech Min 37(7):1055-1060. doi: 10.1016/s1365-1609(00)00037-x
195. Li HB, Zhao J, Li TJ, Yuan JX (2001) Analytical simulation of the dynamic compressive strength of a granite using the sliding crack model. Int J Numer Anal Meth Geomech 25(9):853-869. doi: 10.1002/nag.156
196. Li XB, Lok TS, Zhao J (2005) Dynamic characteristics of granite subjected to intermediate loading rate. Rock Mech Rock Eng 38(1):21-39. doi: 10.1007/s00603-004-0030-7
197. Li XB, Hong L, Yin TB, Zhou ZL, Ye ZY (2008a) Relationship between diameter of split Hopkinson pressure bar and minimum loading rate under rock failure. J Cent South Univ Technol 15(2):218-223. doi: 10.1007/s11771-008-0042-7
198. Li XB, Zhou ZL, Lok TS, Hong L, Yin TB (2008b) Innovative testing technique of rock subjected to coupled static and dynamic loads. Int J Rock Mech Min 45(5):739-748. doi: 10.1016/j.ijrmms.2007.08.013
199. Li QM, Lu YB, Meng H (2009) Further investigation on the dynamic compressive strength enhancement of concrete-like materials based on split Hopkinson pressure bar tests. Part II: numerical simulations. Int J Impact Eng 36(12):1335-1345. doi: 10.1016/j.ijimpeng.2009.04.010
200. Li JC, Ma GW, Huang X (2010a) Analysis of wave propagation through a filled rock joint. Rock Mech Rock Eng 43(6):789-798. doi: 10.1007/s00603-009- 0033-5
201. Li XB, Yin TB, Zhou ZL, Hong L, Gao K (2010b) Study of dynamic properties of siltstone under coupling effects of temperature and pressure. Chin J Rock Mech Eng 29(12):2377-2384
202. Li HB, Li JC, Liu B, Li J, Li S, Xia X (2013) Direct tension test for rock material under different strain rates at quasi-static loads. Rock Mech Rock Eng (in press). doi: 10.1007/s00603-013-0406-7
203. Liang R, Khan AS (1999) A critical review of experimental results and constitutive models for BCC and FCC metals over a wide range of strain rates and temperatures. Int J Plast 15(9):963-980. doi: 10.1016/s0749-6419(99)00021-2
204. Lindholm US (ed) (1971) High strain rate tests, techniques of metals research, measurement of mechanical properties, vol 5. Wiley Interscience, New York
205. Lindholm US (1974) Review of dynamic testing techniques and material behaviour In: Harding J (ed) The 1st Conference on Mechanical Properties of Materials at High Rates of Strain, Oxford, pp 3-21
206. Lindholm U, Yeakley L (1968) High strain-rate testing: tension and compression. Exp Mech 8(1):1-9. doi: 10.1007/bf02326244
207. Lindholm US, Yeakley LM, Nagy A (1974) The dynamic strength and fracture properties of Dresser basalt. Int J Rock Mech Min Sci Geomech Abstr 11(5):181-191. doi: 10.1016/0148-9062(74)90885-7
208. Lipkin J, Grady DE, Campbell JD (1977) Dynamic flow and fracture of rock in pure shear. The 18th U.S. Symposium on Rock Mechanics (USRMS), Keystone, pp 77-0180
209. Lipkin J, Schuler KW, Parry T (1979) Dynamic torsional failure of limestone tubes. In: Harding J (ed) The 2nd conference on mechanical properties of materials at high rates of strain, Oxford, pp 101-110
210. Liu S, Xu J (2013) Study on dynamic characteristics of marble under impact loading and high temperature. Int J Rock Mech Min 62:51-58. doi: 10.1016/j.ijrmms.2013.03.014
211. Liu CP, Ju Y, Duan QQ (2010) Influence of internal characteristic length scale on dynamic crack propagating mechanism in rock materials. Rock Soil Mech 31(Suppl. 1):91-95
212. Logan JM, Handin J (1970) Triaxial compression testing at intermediate strain rates. The 12th U.S. Symposium on Rock Mechanics (USRMS), Missouri, pp 70-0167
213. Long QY, Li S, Lung CW (1991) Studies on the fractal dimension of a fracture surface formed by slow stable crack propagation. J Phys D Appl Phys 24(4):602. doi: 10.1088/0022-3727/24/4/011
214. Lou W (1994) Dynamic fracture behaviour of dry and waterlogged granites. Explo Shock Waves 14(3):249-254
215. Lu YB, Li QM (2011) About the dynamic uniaxial tensile strength of concrete-like materials. Int J Impact Eng 38(4):171-180. doi: 10.1016/j.ijimpeng.2010.10.028
216. Lu YB, Li QM, Ma GW (2010) Numerical investigation of the dynamic compressive strength of rocks based on split Hopkinson pressure bar tests. Int J Rock Mech Min 47(5):829-838. doi: 10.1016/j.ijrmms.2010.03.013
217. Lundberg B (1976) A split Hopkinson bar study of energy absorption in dynamic rock fragmentation. Int J Rock Mech Min Sci Geomech Abstr 13(6):187-197. doi: 10.1016/0148-9062(76)91285-7
218. Lyakhovsky V, Hamiel Y, Ben-Zion Y (2011) A non-local visco-elastic damage model and dynamic fracturing. J Mech Phys Solids 59(9):1752-1776. doi: 10.1016/j.jmps.2011.05.016
219. Ma GW, An XM (2008) Numerical simulation of blasting-induced rock fractures. Int J Rock Mech Min 45(6):966-975. doi: 10.1016/j.ijrmms.2007.12.002
220. Malvar LJ, Ross CA (1998) Review of strain rate effects for concrete in tension. ACI Mater J 95(6):735-739
221. Malvern LE (1984) Experimental and theoretical approaches to characterisation of material behaviour at high rates of deformation. In: Harding J (ed) The 3rd Conference on Mechanical Properties of Materials at High Rates of Strain, Oxford, pp 1-20
222. Malvern LE, Jenkens DA (1990) Dynamic testing of laterally confined concrete, technical report. Tyndall Air Force Base, Florida
223. Malvern LE, Jenkinds DA, Tang T, McLure S (1991) Dynamic testing of laterally confined concrete. Micromechanics of failure of quasi brittle materials. Elsevier Applied Science, London
224. Masuda K, Mizutani H, Yamada I (1987) Experimental study of strain-rate dependence and pressure dependence of failure properties of granite. J Phys Earth 35:37-66
225. Meyers MA (1994) Dynamic behavior of materials. Wiley, New York
226. Mohr D, Gary G, Lundberg B (2010) Evaluation of stress-strain curve estimates in dynamic experiments. Int J Impact Eng 37(2):161-169. doi: 10.1016/j.ijimpeng.2009.09.007
227. Morozov NF, Petrov YV (2000) Dynamics of fracture. Springer-Verlag, New York
228. Nakano M, Kishida K, Yamauchi Y, Sogabe Y (1994) Dynamic fracture initiation in brittle materials under combined mode I/II loading. J Phys IV Fr 4(C8):695-700. doi: 10.1051/jp4:19948106
229. Nasseri MHB, Mohanty B (2008) Fracture toughness anisotropy in granitic rocks. Int J Rock Mech Min 45(2):167-193. doi: 10.1016/j.ijrmms.2007.04.005
230. Nemat-Nasser S (2000) Introduction to high strain rate testing. ASM handbook, mechanical testing and evaluation. ASM International, Materials Park OH 8:427-428
231. Nemat-Nasser S, Deng H (1994) Strain-rate effect on brittle failure in compression. Acta Metall Mater 42(3):1013-1024. doi: 10.1016/0956-7151(94)90295- x
232. Nemat-Nasser S, Horii H (1982) Compression-induced nonplanar crack extension with application to splitting, exfoliation, and rockburst. J Geophys Res 87(B8):6805-6821. doi: 10.1029/JB087iB08p06805
233. Nemat-Nasser S, Jon BI, Starrett JE (1991) Hopkinson techniques for dynamic recovery experiments. Proc R Soc Lond A 435(1894):371-391. doi: 10.1098/rspa.1991.0150
234. Nemat-Nasser S, Isaacs J, Rome J (2000) Triaxial Hopkinson techniques. ASM handbook, mechanical testing and evaluation. ASM International, Materials Park OH 8:516-518
235. Nicholas T (1982) Material behavior at high strain rates. In: Zukas JA, Nicholas T, Swift HF, Greszczuk LB, Curran DR (eds) Impact dynamics. Wiley, New York, pp 277-332
236. Nojima T, Ogawa K (1989) Impact strength of ceramics at high temperatures. In: Harding J (ed) The 4th International Conference on the Mechanical Properties of Materials at High Rates of Strain, Oxford, pp 371-378
237. Ogata Y, Jung WJ, Kubota S, Wada Y (2004) Effect of the strain rate and water saturation for the dynamic tensile strength of rocks. Forum Mater Sci 465-466:361-366. doi: 10.4028/www.scientific.net/MSF.465-466.361
238. 3/sec. Int J Rock Mech Min Sci Geomech Abstr 28(1):115-118. doi: 10.1016/0148-9062(91)93241-w
239. Omidvar M, Iskander M, Bless S (2012) Stress-strain behavior of sand at high strain rates. Int J Impact Eng 49:192-213. doi: 10.1016/j.ijimpeng.2012.03. 004
240. Ou ZC, Duan ZP, Huang FL (2010) Analytical approach to the strain rate effect on the dynamic tensile strength of brittle materials. Int J Impact Eng 37(8):942-945. doi: 10.1016/j.ijimpeng.2010.02.003
241. Ou ZC, Yan C, Duan ZP, Pi AG, Huang FL (2012) Dynamic behaviors of load-carrying capacity of brittle materials. Int J Impact Eng 42:59-65. doi: 10.1016/j.ijimpeng.2011.11.002
242. Ouchterlony F (1988) Suggested methods for determining the fracture toughness of rock. Int J Rock Mech Min 25(2):71-96. doi: 10.1016/0148-9062(88) 91871-2
243. Owen DM, Zhuang S, Rosakis AJ, Ravichandran G (1998) Experimental determination of dynamic crack initiation and propagation fracture toughness in thin aluminium sheets. Int J Fract 90(1):153-174. doi: 10.1023/a:1007439301360
244. Ozbolt J, Sharma A, Reinhardt H-W (2011) Dynamic fracture of concrete - compact tension specimen. Int J Solids Struct 48(10):1534-1543. doi: 10.1016/j.ijsolstr.2011.01.033
245. Paliwal B, Ramesh KT (2008) An interacting micro-crack damage model for failure of brittle materials under compression. J Mech Phys Solids 56(3):896-923. doi: 10.1016/j.jmps.2007.06.012
246. Paliwal B, Ramesh KT, McCauley JW, Chen M (2008) Dynamic compressive failure of AlON under controlled planar confinement. J Am Ceram Soc 91(11):3619-3629. doi: 10.1111/j.1551-2916.2008.02712.x
247. Pan Y, Chen W, Song B (2005) Upper limit of constant strain rates in a split Hopkinson pressure bar experiment with elastic specimens. Exp Mech 45(5):440-446. doi: 10.1007/bf02427992
248. Paterson MS, Olgaard DL (2000) Rock deformation tests to large shear strains in torsion. J Struct Geol 22(9):1341-1358. doi: 10.1016/s0191-8141(00) 00042-0
249. Paterson MS, Wong T-F (2005) Experimental rock deformation: The brittle field, 2nd edn. Springer-Verlag, Berlin
250. Pedersen RR, Simone A, Sluys LJ (2008) An analysis of dynamic fracture in concrete with a continuum visco-elastic visco-plastic damage model. Eng Fract Mech 75(13):3782-3805. doi: 10.1016/j.engfracmech.2008.02.004
251. Peirs J, Verleysen P, Van Paepegem W, Degrieck J (2011) Determining the stress-strain behaviour at large strains from high strain rate tensile and shear experiments. Int J Impact Eng 38(5):406-415. doi: 10.1016/j.ijimpeng.2011.01. 004
252. 3 at high strain rates. Eur Phys J Spec Top 206(1):117-128. doi: 10.1140/epjst/e2012-01593-3
253. Perkins RD, Green SJ (1968) High speed photography in dynamic materials testing. Rev Sci Instrum 39(8):1209-1210. doi: 10.1063/1.1683621
254. 3/second. Int J Rock Mech Min Sci Geomech Abstr 7(5):527-528, IN5-IN6, 529-535. doi: 10.1016/0148-9062(70) 90005-7
255. Persen LN (1975) Rock dynamics and geophysical exploration, vol 8. Developments in Geotechnical Engineering, Elsevier, New York
256. Petrov YV, Morozov NF (1994) On the modeling of fracture of brittle solids. J Appl Mech 61:710-712. doi: 10.1115/1.2901518
257. Petrov YV, Utkin AA (1989) Dependence of the dynamic strength on loading rate. Mater Sci 25(2):153-156. doi: 10.1007/bf00780499
258. Pierron F, Forquin P (2012) Ultra-high-speed full-field deformation measurements on concrete spalling specimens and stiffness identification with the virtual fields method. Strain 48(5):388-405. doi: 10.1111/j.1475-1305.2012. 00835.x
259. Pierron F, Sutton M, Tiwari V (2011) Ultra high speed DIC and virtual fields method analysis of a three point bending impact test on an aluminium bar. Exp Mech 51(4):537-563. doi: 10.1007/s11340-010-9402-y
260. Powell CN (1979) Lateral inertia effects on rock failure in split-Hopkinson-bar experiments. M.S., Colorado State University, Golden
261. Qi CZ, Wang MY, Qian QH (2009) Strain-rate effects on the strength and fragmentation size of rocks. Int J Impact Eng 36(12):1355-1364. doi: 10.1016/j.ijimpeng.2009.04.008
262. Rabotnov YN (1963) On the equations of state for creep. In: Progress in applied mechanics, the Prager anniversary volume. Macmillan, New York
263. Ragueneau F, Gatuingt F (2003) Inelastic behavior modelling of concrete in low and high strain rate dynamics. Comput Struct 81(12):1287-1299. doi: 10.1016/S0045-7949(03)00043-9
264. Ramesh KT (2008) High rates and impact experiments. In: Sharpe WN (ed) Springer handbook of experimental solid mechanics. Springer, US, pp 929-960. doi: 10.1007/978-0-387-30877-7-33
265. Ramesh KT, Narasimhan S (1996) Finite deformations and the dynamic measurement of radial strains in compression Kolsky bar experiments. Int J Solids Struct 33(25):3723-3738. doi: 10.1016/0020-7683(95)00206-5
266. Ravi-Chandar K (2004) Dynamic fracture. Elsevier Science, London
267. Ravi-Chandar K, Knauss WG (1984) An experimental investigation into dynamic fracture: I. Crack initiation and arrest. Int J Fract 25(4):247-262. doi: 10.1007/bf00963460
268. Ravichandran G, Subhash G (1994) Critical appraisal of limiting strain rates for compression testing of ceramics in a split Hopkinson pressure bar. J Am Ceram Soc 77(1):263-267. doi: 10.1111/j.1151-2916.1994.tb06987.x
269. Ravichandran G, Subhash G (1995) A micromechanical model for high strain rate behavior of ceramics. Int J Solids Struct 32(17-18):2627-2646. doi: 10.1016/0020-7683(94)00286-6
270. Reinhardt HW, Weerheijm J (1991) Tensile fracture of concrete at high loading rates taking account of inertia and crack velocity effects. Int J Fract 51(1):31-42. doi: 10.1007/bf00020851
271. Ren X, Li J (2013) A unified dynamic model for concrete considering viscoplasticity and rate-dependent damage. Int J Damage Mech 22(4):530-555. doi: 10.1177/1056789512455968
272. Rittel D, Lee S, Ravichandran G (2002) A shear-compression specimen for large strain testing. Exp Mech 42(1):58-64. doi: 10.1007/bf02411052
273. Rodríguez J, Navarro C, Sánchez V (1994) Splitting tests: an alternative to determine the dynamic tensile strength of ceramic materials. J Phys IV Fr 4(C8):101-106. doi: 10.1051/jp4:1994815
274. Rome J, Isaacs J, Nemat-Nasser S (2004) Hopkinson techniques for dynamic triaxial compression tests. In: Gdoutos E (ed) Recent advances in experimental mechanics. Springer, The Netherlands, pp 3-12. doi: 10.1007/0-306-48410-2-1
275. Rosakis AJ (1999) Explosion at the parthenon: can we pick up the pieces? Report No. CalCIT SM report 99-3. California Institute of Technology, Pasadena
276. Ross CA, Thompson PY, Tedesco JW (1989) Split-Hopkinson pressure-bar tests on concrete and mortar in tension and compression. ACI Mater J 86(5):475-481
277. Rossi P (1991) A physical phenomenon which can explain the mechanical behaviour of concrete under high strain rates. Mater Struct 24(6):422-424. doi: 10.1007/bf02472015
278. Rossi P, Toutlemonde F (1996) Effect of loading rate on the tensile behaviour of concrete: description of the physical mechanisms. Mater Struct 29(2):116-118. doi: 10.1007/bf02486201
279. Rossi P, Van Mier J, Toutlemonde F, Le Maou F, Boulay C (1994) Effect of loading rate on the strength of concrete subjected to uniaxial tension. Mater Struct 27(5):260-264. doi: 10.1007/bf02473042
280. Ruiz G, Ortiz M, Pandolfi A (2000) Three-dimensional finite-element simulation of the dynamic Brazilian tests on concrete cylinders. Int J Numer Meth Eng 48(7):963-994. doi: 10.1002/(sici)1097-0207(20000710)48:7<963:aid- nme908>3.0.co;2-x
281. Saksala T (2010) Damage-viscoplastic consistency model with a parabolic cap for rocks with brittle and ductile behavior under low-velocity impact loading. Int J Numer Anal Meth Geomech 34(13):1362-1386. doi: 10.1002/nag.868
282. Sato K, Kawakita M, Kinoshita S (1981) The dynamic fracture properties of rocks under confining pressure. Mem Fac Eng, Hokkaido Univ 15(4):467-478
283. Schardin H (1959) Velocity effects in fracture. In: Averbach BL, Felbeck DK, Thomas DA (eds) Fracture. Wiley, New York, pp 297-330
284. Schuler H, Mayrhofer C, Thoma K (2006) Spall experiments for the measurement of the tensile strength and fracture energy of concrete at high strain rates. Int J Impact Eng 32(10):1635-1650. doi: 10.1016/j.ijimpeng.2005. 01.010
285. Serdengecti S, Boozer GD (1961) The effects of strain rate and temperature on the behavior of rocks subjected to triaxial compression. The 4th U.S. Symposium on Rock Mechanics (USRMS), Pennsylvania, pp 83-97
286. Shan R, Jiang Y, Li B (2000) Obtaining dynamic complete stress-strain curves for rock using the split Hopkinson pressure bar technique. Int J Rock Mech Min 37(6):983-992. doi: 10.1016/s1365-1609(00)00031-9
287. Shi W, Wu Y, Wu L (2007) Quantitative analysis of the projectile impact on rock using infrared thermography. Int J Impact Eng 34(5):990-1002. doi: 10.1016/j.ijimpeng.2006.03.002
288. Sierakowski RL (1997) Strain rate effects in composites. Appl Mech Rev 50(12):741-761. doi: 10.1115/1.3101860
289. Silva C, Rosa P, Martins P (2009) An innovative electromagnetic compressive split Hopkinson bar. Int J Mech Mater Des 5(3):281-288. doi: 10.1007/s10999-009-9101-y
290. Silva C, Rosa P, Martins P (2012) Electromagnetic cam driven compression testing equipment. Exp Mech 52(8):1211-1222. doi: 10.1007/s11340-011-9576-y
291. Siviour CR, Grantham SG (2009) High resolution optical measurements of specimen deformation in the split Hopkinson pressure bar. Imag Sci J 57(6):333-343. doi: 10.1179/174313109x454792
292. Siviour CR, Arthington MR, Wielewski E, Petrinic N (2012) Increasing data from high rate characterization experiments using optical reconstruction. AIP Conf Proc 1426(1):438-441. doi: 10.1063/1.3686312
293. Smirnov V, Petrov Y, Bratov V (2012) Incubation time approach in rock fracture dynamics. Sci China, Ser G 55(1):78-85. doi: 10.1007/s11433-011-4579-3
294. Song B, Syn C, Grupido C, Chen W, Lu WY (2008) A long split Hopkinson pressure bar (LSHPB) for intermediate-rate characterization of soft materials. Exp Mech 48(6):809-815. doi: 10.1007/s11340-007-9095-z
295. Spray JG (2010) Frictional melting processes in planetary materials: from hypervelocity impact to earthquakes. Annu Rev Earth Planet Sci 38(1):221-254. doi: 10.1146/annurev.earth.031208.100045
296. Stacey TR (1980) A simple device for the direct shear-strength testing of intact rock. J S Afr Inst Min Metall 80(3):129-130
297. Steverding B, Lehnigk SH (1970) Response of cracks to impact. J Appl Phys 41(5):2096-2099. doi: 10.1063/1.1659170
298. Stowe RL, Ainsworth DL (1968) Effect of rate of loading on strength and Young's modulus of elasticity of rock. The 10th U.S. Symposium on Rock Mechanics (USRMS), Austin, pp 3-34
299. Subhash G, Maiti S, Geubelle PH, Ghosh D (2008) Recent advances in dynamic indentation fracture, impact damage and fragmentation of ceramics. J Am Ceram Soc 91(9):2777-2791. doi: 10.1111/j.1551-2916.2008.02624.x
300. Sutton MA, Orteu J-J, Schreier H (2009) Image correlation for shape, motion and deformation measurements: basic concepts, theory and applications. Springer, New York
301. Swan G, Cook J, Bruce S, Meehan R (1989) Strain rate effects in Kimmeridge Bay shale. Int J Rock Mech Min Sci Geomech Abstr 26(2):135-149. doi: 10.1016/0148-9062(89)90002-8
302. Sylven ET, Agarwal S, Briant CL, Cleveland RO (2004) High strain rate testing of kidney stones. J Mater Sci Mater Med 15(5):613-617. doi: 10.1023/B:JMSM.0000026383.94515.a8
303. Tang C, Xu X (1990) A new method for measuring dynamic fracture toughness of rock. Eng Fract Mech 35(4-5):783-791. doi: 10.1016/0013-7944(90)90162-a
304. Taylor LM, Chen E-P, Kuszmaul JS (1986) Microcrack-induced damage accumulation in brittle rock under dynamic loading. Comput Meth Appl Mech Eng 55(3):301-320. doi: 10.1016/0045-7825(86)90057-5
305. Tedesco JW, Ross CA (1998) Strain-rate-dependent constitutive equations for concrete. J Press Vess-T ASME 120(4):398-405. doi: 10.1115/1.2842350
306. Tedesco JW, Ross CA, Brunair RM (1989) Numerical analysis of dynamic split cylinder tests. Comput Struct 32(3-4):609-624. doi: 10.1016/0045-7949(89) 90350-7
307. Toutlemonde F, Gary G (2009) Dynamic behavior of concrete: Experimental aspects. In: Mazars J, Millard A (eds) Dynamic behavior of concrete and seismic engineering. ISTE Ltd, London, pp 1-54. doi: 10.1002/9780470611555.ch1
308. Tuler FR, Butcher BM (1968) A criterion for the time dependence of dynamic fracture. Int J Fract 4(4):431-437. doi: 10.1007/bf00186808
309. Ulusay R, Gokceoglu C, Sulukcu S (2001) Draft ISRM suggested method for determining block punch strength index (BPI). Int J Rock Mech Min 38(8):1113-1119. doi: 10.1016/s1365-1609(01)00078-8
310. Van de Ven M, Smit AF, Krans RL (1997) Possibilities of a semi-circular bending test. The 8th International Conference on Asphalt Pavements, Seattle, pp 939-950
311. Walley SM (2010) Historical review of high strain rate and shock properties of ceramics relevant to their application in armour. Adv Appl Ceram 109(8):446-466. doi: 10.1179/174367609x422180
312. Wang S, Liu KX (2011) Experimental research on dynamic mechanical properties of PZT ceramic under hydrostatic pressure. Mater Sci Eng A 528(21):6463-6468. doi: 10.1016/j.msea.2011.05.019
313. Wang EZ, Shrive NG (1995) Brittle fracture in compression: mechanisms, models and criteria. Eng Fract Mech 52(6):1107-1126. doi: 10.1016/0013-7944(95) 00069-8
314. Wang Y, Tonon F (2011) Dynamic validation of a discrete element code in modeling rock fragmentation. Int J Rock Mech Min 48(4):535-545. doi: 10.1016/j.ijrmms.2011.02.003
315. Wang WM, Sluys LJ, de Borst R (1997) Viscoplasticity for instabilities due to strain softening and strain-rate softening. Int J Numer Meth Eng 40(20):3839-3864. doi: 10.1002/(SICI)1097-0207(19971030)40:20<3839::AID- NME245>3.0.CO;2-6
316. Wang QZ, Jia XM, Kou SQ, Zhang ZX, Lindqvist PA (2004) The flattened Brazilian disc specimen used for testing elastic modulus, tensile strength and fracture toughness of brittle rocks: analytical and numerical results. Int J Rock Mech Min 41(2):245-253. doi: 10.1016/s1365-1609(03)00093-5
317. Wang QZ, Li W, Song XL (2006) A method for testing dynamic tensile strength and elastic modulus of rock materials using SHPB. Pure Appl Geophys 163(5):1091-1100. doi: 10.1007/s00024-006-0056-8
318. Wang QZ, Li W, Xie HP (2009) Dynamic split tensile test of flattened Brazilian disc of rock with SHPB setup. Mech Mater 41(3):252-260. doi: 10.1016/j.mechmat.2008.10.004
319. Wang B, Li X, Yin T, Ma C, Yin Z, Li Z (2010a) Split Hopkinson pressure bar (SHPB) experiments on dynamic strength of water-saturated sandstone. Chin J Rock Mech Eng 29(5):1003-1009
320. Wang LL, Zhou FH, Sun ZJ, Wang YZ, Shi SQ (2010b) Studies on rate-dependent macro-damage evolution of materials at high strain rates. Int J Damage Mech 19(7):805-820. doi: 10.1177/1056789509359654
321. Wang QZ, Zhang S, Xie HP (2010c) Rock dynamic fracture toughness tested with holed-cracked flattened Brazilian discs diametrically impacted by SHPB and its size effect. Exp Mech 50(7):877-885. doi: 10.1007/s11340-009-9265-2
322. Wang QZ, Feng F, Ni M, Gou XP (2011a) Measurement of mode I and mode II rock dynamic fracture toughness with cracked straight through flattened Brazilian disc impacted by split Hopkinson pressure bar. Eng Fract Mech 78(12):2455-2469. doi: 10.1016/j.engfracmech.2011.06.004
323. Wang SS, Zhang MH, Quek ST (2011b) Effect of specimen size on static strength and dynamic increase factor of high-strength concrete from SHPB test. J Test Eval 39(5):898-907. doi: 10.1520/JTE103370
324. Weerasooriya T, Moy P, Casem D, Cheng M, Chen W (2006) A four point bend technique to determine dynamic fracture toughness of ceramics. J Am Ceram Soc 89(3):990-995. doi: 10.1111/j.1551-2916.2005.00896.x
325. Whittles DN, Kingman S, Lowndes I, Jackson K (2006) Laboratory and numerical investigation into the characteristics of rock fragmentation. Miner Eng 19(14):1418-1429. doi: 10.1016/j.mineng.2006.02.004
326. Wu PP (1971) The split Hopkinson bar method of rock testing. M.S., Colorado School of Mines, Golden
327. Wu H, Zhang Q, Huang F, Jin Q (2005) Experimental and numerical investigation on the dynamic tensile strength of concrete. Int J Impact Eng 32(1-4):605-617. doi: 10.1016/j.ijimpeng.2005.05.008
328. Wu W, Li J, Zhao J (2012) Loading rate dependency of dynamic responses of rock joints at low loading rate. Rock Mech Rock Eng 45(3):421-426. doi: 10.1007/s00603-011-0212-z
329. Xia K (2013a) A Mohr-Coulomb failure criterion for rocks subjected to dynamic loading. In: Yang Q, Zhang J-M, Zheng H, Yao Y (eds) Constitutive modeling of geomaterials. Springer series in geomechanics and geoengineering. Springer, Berlin, pp 367-370. doi: 10.1007/978-3-642-32814-5-51
330. Xia K (2013b) Status of characterization of strength and fracture properties of rocks under dynamic loading. In: Proceedings of the 10th international symposium on rock fragmentation by blasting, FRAGBLAST, New Delhi, pp 41-51
331. Xia K, Nasseri MHB, Mohanty B, Lu F, Chen R, Luo SN (2008) Effects of microstructures on dynamic compression of Barre granite. Int J Rock Mech Min 45(6):879-887. doi: 10.1016/j.ijrmms.2007.09.013
332. Xie H, Chen Z (1988) Fractal geometry and fracture of rock. Acta Mech Sin 4(3):255-264. doi: 10.1007/bf02486657
333. Green SJ, Perkins RD (1969) Uniaxial compression tests at strain rates from 0.0001/sec to 1000/sec on three geologic materials. General Motors Technical Center, Materials and Structures Lab Report, Warren
334. Yan F, Feng XT, Chen R, Xia K, Jin C (2012) Dynamic tensile failure of the rock interface between tuff and basalt. Rock Mech Rock Eng 45(3):341-348. doi: 10.1007/s00603-011-0177-y
335. Yang LM, Shim VPW (2005) An analysis of stress uniformity in split Hopkinson bar test specimens. Int J Impact Eng 31(2):129-150. doi: 10.1016/j.ijimpeng.2003.09.002
336. Yang WJ, Yu CT, Kobayashi AS (1991) SEM quantification of transgranular vs intergranular fracture. J Am Ceram Soc 74(2):290-295. doi: 10.1111/j.1151-2916.1991.tb06877.x
337. Yang RS, Yue ZW, Sun ZH, Xiao TS, Guo DM (2009) Dynamic fracture behavior of rock under impact load using the caustics method. Min Sci Technol 19(1):79-83. doi: 10.1016/s1674-5264(09)60015-6
338. Yin TB, Li XB, Xia K, Huang S (2012a) Effect of thermal treatment on the dynamic fracture toughness of Laurentian granite. Rock Mech Rock Eng 45(6):1087-1094. doi: 10.1007/s00603-012-0240-3
339. Yin ZQ, Li XB, Jin JF, He XQ, Du K (2012b) Failure characteristics of high stress rock induced by impact disturbance under confining pressure unloading. Trans Nonferr Metal Soc 22(1):175-184. doi: 10.1016/s1003-6326(11) 61158-8
340. Young C, Powell CN (1979) Lateral inertia effects on rock failure in split-Hopkinson-bar experiments. The 20th U.S. Symposium on Rock Mechanics (USRMS), Austin, pp 79-0299
341. Yu Y (1992) Study on dynamic characteristic of rocks using triaxial SHPB. Chin J Geotech Eng 14(3):76-79
342. Yu Y, Zhang ZX (1995) Determining critical time of rock dynamic fracture by dynamic Moire method. J Univ Sci Tech Beijing 2(2):109-113
343. Yu Y, Zhang J, Zhang J (2009) A modified Brazilian disk tension test. Int J Rock Mech Min 46(2):421-425. doi: 10.1016/j.ijrmms.2008.04.008
344. Yuan F, Prakash V (2008) Use of a modified torsional Kolsky bar to study frictional slip resistance in rock-analog materials at coseismic slip rates. Int J Solids Struct 45(14-15):4247-4263. doi: 10.1016/j.ijsolstr.2008.03.012
345. Yuan F, Prakash V, Tullis T (2011) Origin of pulverized rocks during earthquake fault rupture. J Geophys Res 116(B6):B06309. doi: 10.1029/2010jb007721
346. Zang A, Stephansson O (2010) Rock fracture criteria. In: Zang A, Stephansson O (eds) Stress field of the earth's crust. Springer, The Netherlands, pp 37-62. doi: 10.1007/978-1-4020-8444-7-3
347. Zavattieri PD, Espinosa HD (2001) Grain level analysis of crack initiation and propagation in brittle materials. Acta Mater 49(20):4291-4311. doi: 10.1016/s1359-6454(01)00292-0
348. Zener C, Hollomon JH (1944) Effect of strain rate upon plastic flow of steel. J Appl Phys 15(1):22-32. doi: 10.1063/1.1707363
349. Zhang S, Wang QZ (2009) Determination of rock fracture toughness by split test using five types of disc specimens. Rock Soil Mech 30(1):12-18
350. Zhang QB, Zhao J (2013a) Determination of mechanical properties and full-field strain measurements of rock material under dynamic loads. Int J Rock Mech Min 60:423-439. doi: 10.1016/j.ijrmms.2013.01.005
351. Zhang QB, Zhao J (2013b) Effect of loading rate on fracture toughness and failure micromechanisms in marble. Eng Fract Mech 102:288-309. doi: 10.1016/j.engfracmech.2013.02.009
352. Zhang QB, Zhao J (2013c) A micromechanics-based model for dynamic behaviour of rock. Int J Rock Mech Min submitted
353. Zhang QB, Zhao J (2013d) Quasi-static and dynamic fracture behaviour of rock materials: phenomena and mechanisms. Rock Mech Rock Eng submitted
354. Zhang ZX, Kou SQ, Yu J, Yu Y, Jiang LG, Lindqvist PA (1999) Effects of loading rate on rock fracture. Int J Rock Mech Min 36(5):597-611. doi: 10.1016/s0148-9062(99)00031-5
355. Zhang ZX, Kou SQ, Jiang LG, Lindqvist PA (2000) Effects of loading rate on rock fracture: fracture characteristics and energy partitioning. Int J Rock Mech Min 37(5):745-762. doi: 10.1016/s1365-1609(00)00008-3
356. Zhang ZX, Yu J, Kou SQ, Lindqvist PA (2001a) Effects of high temperatures on dynamic rock fracture. Int J Rock Mech Min 38(2):211-225. doi: 10.1016/s1365-1609(00)00071-x
357. Zhang ZX, Yu J, Kou SQ, Lindqvist PA (2001b) On study of influences of loading rate on fractal dimensions of fracture surfaces in gabbro. Rock Mech Rock Eng 34(3):235-242. doi: 10.1007/s006030170011
358. Zhang M, Wu HJ, Li QM, Huang FL (2009) Further investigation on the dynamic compressive strength enhancement of concrete-like materials based on split Hopkinson pressure bar tests. Part I: experiments. Int J Impact Eng 36(12):1327-1334. doi: 10.1016/j.ijimpeng.2009.04.009
359. Zhang XX, Yu RC, Ruiz G, Tarifa M, Camara MA (2010) Effect of loading rate on crack velocities in HSC. Int J Impact Eng 37(4):359-370. doi: 10.1016/j.ijimpeng.2009.10.002
360. Zhao YP (1995) Suggestion of a new criterion of dynamic fracture initiation. Int J Fract 71(4):R77-R78. doi: 10.1007/bf00037822
361. Zhao J (2000) Applicability of Mohr-Coulomb and Hoek-Brown strength criteria to the dynamic strength of brittle rock. Int J Rock Mech Min 37(7):1115-1121. doi: 10.1016/s1365-1609(00)00049-6
362. Zhao J (2011) An overview of some recent progress in rock dynamics research. In: Zhou YX, Zhao J (eds) Advances in rock dynamics and applications. CRC Press, USA, pp 5-33
363. Zhao H, Gary G (1996) On the use of SHPB techniques to determine the dynamic behavior of materials in the range of small strains. Int J Solids Struct 33(23):3363-3375. doi: 10.1016/0020-7683(95)00186-7
364. Zhao H, Gary G (1997) A new method for the separation of waves. Application to the SHPB technique for an unlimited duration of measurement. J Mech Phys Solids 45(7):1185-1202. doi: 10.1016/s0022-5096(96)00117-2
365. Zhao J, Li HB (2000) Experimental determination of dynamic tensile properties of a granite. Int J Rock Mech Min 37(5):861-866. doi: 10.1016/s1365-1609(00)00015-0
366. Zhao J, Li HB, Zhao YH (1998) Dynamics strength tests of the Bukit Timah granite. Geotechnical research report NTU/GT/98-2. Nanyang Technological University, Singapore
367. Zhao J, Li HB, Wu MB, Li TJ (1999a) Dynamic uniaxial compression tests on a granite. Int J Rock Mech Min 36(2):273-277. doi: 10.1016/s0148-9062(99)00008- x
368. Zhao J, Zhou YX, Hefny AM, Cai JG, Chen SG, Li HB, Liu JF, Jain M, Foo ST, Seah CC (1999b) Rock dynamics research related to cavern development for ammunition storage. Tunn Undergr Sp Tech 14(4):513-526. doi: 10.1016/s0886-7798(00)00013-4
369. Zhao J, Zhou YX, Ma GW (2008) Rock failure, wave propagation and tunnel stability under dynamic loads. In: Majdi A (ed) The 5th Asian rock mechanics symposium, Tehran, pp 167-181
370. Zhao PD, Lu FY, Chen R, Lin YL, Li JL, Lu L, Sun GL (2011) A technique for combined dynamic compression-shear test. Rev Sci Instrum 82(3):035110-035110. doi: 10.1063/1.3557826
371. Zhao J, Zhou YX, Xia KW (2012) Advances in rock dynamics modelling, testing and engineering. In: Qian QH, Zhou YX (eds) Harmonising rock engineering and the environment, CRC Press/Balkema, The Netherlands, pp 147-154
372. Zhou XQ, Hao H (2008) Modelling of compressive behaviour of concrete-like materials at high strain rate. Int J Solids Struct 45(17):4648-4661. doi: 10.1016/j.ijsolstr.2008.04.002
373. Zhou YX, Zhao J (eds) (2011) Advances in rock dynamics and applications. CRC Press, USA
374. Zhou ZL, Li XB, Ye ZY, Liu KW (2010) Obtaining constitutive relationship for rate-dependent rock in SHPB tests. Rock Mech Rock Eng 43(6):697-706. doi: 10.1007/s00603-010-0096-3
375. Zhou ZL, Li XB, Liu AH, Zou Y (2011) Stress uniformity of split Hopkinson pressure bar under half-sine wave loads. Int J Rock Mech Min 48(4):697-701. doi: 10.1016/j.ijrmms.2010.09.006
376. Zhou YX, Xia K, Li XB, Li HB, Ma GW, Zhao J, Zhou ZL, Dai F (2012) Suggested methods for determining the dynamic strength parameters and mode-I fracture toughness of rock materials. Int J Rock Mech Min 49:105-112. doi: 10.1016/j.ijrmms.2011.10.004
377. Zhou ZL, Li XB, Zou Y, Jiang YH, Li GN (2013a) Dynamic Brazilian tests of granite under coupled static and dynamic loads. Rock Mech Rock Eng (in press). doi: 10.1007/s00603-013-0441-4
378. Zhou ZL, Zou Y, Li XB, Jiang YH (2013b) Stress evolution and failure process of Brazilian disc under impact. J Cent South Univ 20(1):172-177. doi: 10.1007/s11771-013-1473-3
379. Zhu WC (2008) Numerical modelling of the effect of rock heterogeneity on dynamic tensile strength. Rock Mech Rock Eng 41(5):771-779. doi: 10.1007/s00603-006-0117-4
380. Zhu WC, Tang CA (2006) Numerical simulation of Brazilian disk rock failure under static and dynamic loading. Int J Rock Mech Min 43(2):236-252. doi: 10.1016/j.ijrmms.2005.06.008
381. Zhu WC, Tang CA, Huang ZP, Liu JS (2004) A numerical study of the effect of loading conditions on the dynamic failure of rock. Int J Rock Mech Min 41(Suppl 1):348-353. doi: 10.1016/j.ijrmms.2004.03.065
382. Zhu WC, Bai Y, Li XB, Niu LL (2012) Numerical simulation on rock failure under combined static and dynamic loading during SHPB tests. Int J Impact Eng 49:142-157. doi: 10.1016/j.ijimpeng.2012.04.002
383. Zuo QH, Addessio FL, Dienes JK, Lewis MW (2006) A rate-dependent damage model for brittle materials based on the dominant crack. Int J Solids Struct 43(11-12):3350-3380. doi: 10.1016/j.ijsolstr.2005.06.083
384. Zuo QH, Disilvestro D, Richter JD (2010) A crack-mechanics based model for damage and plasticity of brittle materials under dynamic loading. Int J Solids Struct 47(20):2790-2798. doi: 10.1016/j.ijsolstr.2010.06.009