A New Tool to Perform Global Energy Balances in DI Diesel Engines

SAE International Journal of Engines

Volumn 7, Issue 1, 2014, Pages 43-59

  Payri, Francisco ^a   Olmeda, Pablo ^a   Martin, Jaime ^a   Carreño, Ricardo ^a  

^a UNIVERSITAT POLITÈCNICA DE VALÈNCIA   (Spain)

Author keywords

[No Author keywords available]

Indexed keywords

CLIMATE CHANGE; ENERGY BALANCE; ENERGY UTILIZATION; ENGINES; HEAT FLUX; HEAT TRANSFER;

AUXILIARY SYSTEMS; CAPACITANCE MODEL; DI DIESEL ENGINE; EXHAUST AFTERTREATMENT; IN-CYLINDER PRESSURES; OPERATING CONDITION; RADIATIVE MODELS; RECIPROCATING ENGINES;

DIESEL ENGINES;

EID: 84903398108     PISSN: 19463936     EISSN: 19463944     Source Type: Journal    
DOI: 10.4271/2014-01-0665     Document Type: Article

References (55)

1. Wang, X., Huang, Z., Zhang, W., Kuti, O.A., Nishida, K., "Effects of ultra-high injection pressure and micro-hole nozzle on flame structure and soot formation of impinging diesel spray", Appl. Energ. 88(5), 1620-1628, 2011, doi:10.1016/j.apenergy.2010.11.035.
2. Park, S.H., Yoon, S.H., Lee, C.S. "Effects of multiple-injection strategies on overall spray behavior, combustion, and emissions reduction characteristics of biodiesel fuel", Appl. Energ. 88(1), 88-98, 2011, doi:10.1016/j.apenergy.2010.07.024.
3. Al-Hinti, I., Samhouri, M., Al-Ghandoor, A., Sakhrieh, A., "The effect of boost pressure on the performance characteristics of a diesel engine: a neuro-fuzzy approach", Appl. Energ. 86 (1), 113-121, 2009, doi:10.1016/j.apenergy.2008.04.015.
4. Fontana, G., Galloni, E., "Experimental analysis of a spark-ignition engine using exhaust gas recycle at WOT operation", Appl. Energ. 87 (7) 2187-2193, 2010, doi:10.1016/j.apenergy.2009.11.022.
5. Fontana, G., Galloni, E., "Variable valve timing for fuel economy improvement in a small spark-ignition engine", Appl. Energ. 86 (1) 96-105, 2009, doi:10.1016/j.apenergy.2008.04.009.
6. Prasad, B.V.V.S.U., Sharma, C.S., Anand, T.N.C., Ravikrishna, R.V., "High swirl-inducing piston bowls in small diesel engines for emission reduction". Appl. Energ., 88 (7), 2355-2367, 2011, doi:10.1016/j.apenergy.2010.12.068.
7. Kegl, B., "Influence of biodiesel on engine combustion and emission characteristics", Appl. Energ., 88(5),1803-1812, 2011, doi:10.1016/j.apenergy.2010.12.007.
8. Guardiola, C., López, J.J., Martj{dotless}n, J., Garcj{dotless}a-Sarmiento, C., "Semiempirical in-cylinder pressure based model for NOX prediction oriented to control applications", Appl. Therm. Eng. 31(16) 3275-3286, 2011, doi:10.1016/j.applthermaleng.2011.05.048.
9. Heywood, J.B., "Internal combustion engine fundamentals". New York, McGraw-Hill, 1988.
10. Payri, F. et al., "A challenging future for the IC engine: new technologies and the control role", Proceedings of the 2012 IFAC Workshop on Engine and Powertrain Control, Simulation and Modeling (ECOSM12), 1-12, 2012.
11. Burke, R.D. Brace C.J., Hawley, J.G., Pegg I., Review of the system analysis of interactions between the thermal, lubricant, and combustion processes of diesel engines, P.I Mech. Eng. D-J Aut. 224, doi:10.1234/0954407JAUTO1301.
12. Caresana, F., Bilancia, M., Bartolini C.M., "Numerical method for assessing the potential of smart engine thermal management: Application to a medium-upper segment passenger car", Appl. Therm. Eng. 31(16), 3559-3568, 2011, doi:10.1016/j.applthermaleng.2011.07.017.
13. Lehner, C., Parker, G., Arici, O., and Johnson, J., "Design and Development of a Model Based Feedback Controlled Cooling System for Heavy Duty Diesel Truck Applications Using a Vehicle Engine Cooling System Simulation," SAE Technical Paper 2001-01-0336, 2001, doi:10.4271/2001-01-0336.
14. Chalgren, R. and Allen, D., "Light Duty Diesel Advanced Thermal Management," SAE Technical Paper 2005-01-2020, 2005, doi:10.4271/2005-01-2020.
15. Dimopoulos, P., Bacha, C., Soltica, P., Boulouchos, K., "Hydrogen-natural gas blends fuelling passenger car engines: Combustion, emissions and well-to-wheels assessment", Int. J. Hydrogen Energ. 33(23), 7224-7236, 2008, doi:10.1016/j.ijhydene.2008.07.012.
16. Tauzia, X., Maiboom, A., "Experimental study of an automotive Diesel engine efficiency when running under stoichiometric conditions", Appl. Energ. 105, 116-124, 2013, doi:10.1016/j.energy.2012.12.034.
17. Osada, H., Uchida, N., Shimada, K., and Aoyagi, Y., "Reexamination of Multiple Fuel Injections for Improving the Thermal Efficiency of a Heavy-Duty Diesel Engine," SAE Technical Paper 2013-01-0909, 2013, doi:10.4271/2013-01-0909.
18. Sanli, A., Ozsezen A.N., Kilicaslan, I., Canakci, M., "The influence of engine speed and load on the heat transfer between gases and in-cylinder walls at fired and motored conditions of an IDI diesel engine", Appl. Therm. Eng. 28(11-12),1395-1404, 2008, doi:10.1016/j.applthermaleng.2007.10.005.
19. Taymaz, i., "An experimental study of energy balance in low heat rejection diesel engine", Energy 31 (2-3) 364-371 2006, doi:10.1016/j.energy.2005.02.004.
20. Morawitz, U., Mehring, J., and Schramm, L., "Benefits of Thermal Spray Coatings in Internal Combustion Engines, with Specific View on Friction Reduction and Thermal Management," SAE Technical Paper 2013-01-0292, 2013, doi:10.4271/2013-01-0292.
21. Serrano, J., Olmeda, P., Tiseira, A., Garcj{dotless}a-Cuevas, L. et al., "Importance of Mechanical Losses Modeling in the Performance Prediction of Radial Turbochargers under Pulsating Flow Conditions," SAE Int. J. Engines 6(2):729-738, 2013, doi:10.4271/2013-01-0577.
22. Mills, R., Avan, E., and Dwyer-Joyce, R., "Measuring Lubricant Films at the Piston-Cylinder Contact: An Overview of Current Technologies with Focus on Ultrasound," SAE Technical Paper 2013-01-0294, 2013, doi:10.4271/2013-01-0294.
23. Taraza, D., Henein, N., and Bryzik, W., "Friction Losses in Multi-Cylinder Diesel Engines," SAE Technical Paper 2000-01-0921, 2000, doi:10.4271/2000-01-0921.
24. Benajes, J. et al., "Analysis of the combustion process, pollutant emissions and efficiency of an innovative 2-stroke HSDI engine designed for automotive applications", Appl. Therm. Eng., 58(1-2), 181-193, doi:10.1016/j.applthermaleng.2013.03.050.
25. Smith, L., Preston, W., Dowd, G., Taylor, O. et al., "Application of a First Law Heat Balance Method to a Turbocharged Automotive Diesel Engine," SAE Technical Paper 2009-01-2744, 2009, doi:10.4271/2009-01-2744.
26. Ajav, E.A., Singhb Bachchan, Bhattacharya, T.K., "Thermal balance of a single cylinder diesel engine operating on alternative fuels", Ener. Convers. Manage., 41 (14), 1533-1541, 2000, doi:10.1016/S0196-8904(99)00175-2.
27. Abedin, M.J., Masjuki, H.H., Kalam, M.A., Sanjid, A., Ashrafur Rahman S.M., Masum, B.M., "Energy balance of internal combustion engines using alternative fuels", Renew. Sust. Energ. Rev. 26, 20-33, 2013.
28. Rakopoulos, C.D., Giakoumis, E.G., "Second-law analyses applied to internal combustion engines operation", Prog. Energ. Combust. 32(1), 2-47, 2006, doi:10.1016/j.pecs.2005.10.001.
29. Annand, W.J.D., "Heat transfer in the cylinders of reciprocating internal combustion engines", P. I. Mech. Eng., 177, 973-990, 1963.
30. Morel, T. and Keribar, R., "Heat Radiation in D.I. Diesel Engines," SAE Technical Paper 860445, 1986, doi:10.4271/860445.
31. Woschni, G., "A Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion Engine," SAE Technical Paper 670931, 1967, doi:10.4271/670931.
32. Woschni, G., "Die Berechnung der Wandverluste und der thermischen Belastung der Bauteile von Dieselmotoren", MTZ 31/12, 491-499, 1970.
33. Torregrosa, A.J., Olmeda, P., Degraeuwe, B., Reyes, M., "A concise wall temperature model for DI Diesel engines", Appl. Therm. Eng. 26(11-12), 1320-1327, 2006, doi:10.1016/j.applthermaleng.2005.10.021.
34. Torregrosa, A.J., Broatch, A., Olmeda, P., Martj{dotless}n, J., "A contribution to film coefficient estimation in piston cooling galleries", Exp. Therm. Fluid. Sci. 34(2), 142-51, 2010, doi:10.1016/j.expthermflusci.2009.10.003.
35. Torregrosa, A.J., Olmeda, P., Martj{dotless}n, J., Romero, C., "A tool for predicting the thermal performance of a diesel engine", Heat Transfer Eng. 32(1), 891-904, 2011, doi:10.1080/01457632.2011.548639.
36. Payri, F., Galindo, J., Martj{dotless}n, J., and Arnau, F., "A Simple Model for Predicting the Trapped Mass in a DI Diesel Engine," SAE Technical Paper 2007-01-0494, 2007, doi:10.4271/2007-01-0494.
37. Holmberg, K., Andersson, P., Erdemir, A., "Global energy consumption due to friction in passenger cars", Tribol. Int. 47, 221-234, 2012, doi:10.1016/j.triboint.2011.11.022.
38. Payri, F., Margot, X., Gil, A., and Martin, J., "Computational Study of Heat Transfer to the Walls of a DI Diesel Engine," SAE Technical Paper 2005-01-0210, 2005, doi:10.4271/2005-01-0210.
39. Payri, F., Margot, X., Gil, A., Martj{dotless}n, J., "Prediction of heat transfer to the walls in DI diesel engines", Proceedings of the 2nd EACC, 2005.
40. Dec, J., "A Conceptual Model of DI Diesel Combustion Based on Laser-Sheet Imaging*," SAE Technical Paper 970873, 1997, doi:10.4271/970873.
41. Arrègle, J., López, J., Martj{dotless}n, J., and Mocholj{dotless}, E., "Development of a Mixing and Combustion Zero-Dimensional Model for Diesel Engines," SAE Technical Paper 2006-01-1382, 2006, doi:10.4271/2006-01-1382.
42. Monin, C., "Characterization of the soot formation process in a low temperature diffusive flame in a Diesel engine" (in spanish), PhD Thesis, Universitat Politècnica de València, 2009.
43. Lopez, J., Garcia-Oliver, J., Martin, J., Chemisky, J. et al., "A Soot Radiation Model for Diesel Sprays," SAE Technical Paper 2012-01-1069, 2012, doi:10.4271/2012-01-1069.
44. Dolz, V., "Transmisión de calor en motores alternativos: aplicación al aprovechamiento energȳtico de los gases de escape", Ed Revertȳ, 2011, ISBN: 9788429147155.
45. Depcik, C. and Assanis, D., "A Universal Heat Transfer Correlation for Intake and Exhaust Flows in an Spark-Ignition Internal Combustion Engine," SAE Technical Paper 2002-01-0372, 2002, doi:10.4271/2002-01-0372.
46. Caton, J., "Comparisons of Thermocouple, Time-Averaged and Mass-Averaged Exhaust Gas Temperatures for a Spark-Ignited Engine," SAE Technical Paper 820050, 1982, doi:10.4271/820050.
47. Reyes, M. "Heat transfer model for the exhaust manifolds of a reciprocating engine" (in spanish), PhD Thesis, Universitat Politècnica de València, 1994.
48. Cho, S., Cho, S.W., Choi, S.M., Bae, C.S., "Frictional modes of barrel shaped piston rings under flooded lubrication". Tribol. Int. 33 (8) 545-551, 2000, doi:10.1016/S0301-679X(00)00103-1.
49. Taylor, C.M., "Engine Tribology", Elsevier, 1993.
50. Cameron, A., "Basic Lubrication Theory", Ellis Horwood, 1984.
51. Comfort, A., "An Introduction to Heavy-Duty Diesel Engine Frictional Losses And Lubricant Properties Affecting Fuel Economy - Part I," SAE Technical Paper 2003-01-3225, 2003, doi:10.4271/2003-01-3225.
52. Teodorescu, M., Taraza, D., Henein, N., and Bryzik, W., "Simplified Elasto-Hydrodynamic Friction Model of the Cam-Tappet Contact," SAE Technical Paper 2003-01-0985, 2003, doi:10.4271/2003-01-0985.
53. Payri F., Molina S., Martj{dotless}n J., Armas O., "Influence of measurement errors and estimated parameters on combustion diagnosis", Applied Therm. Eng. 26 (2-3), 226-236, 2006, doi:10.1016/j.applthermaleng.2005.05.006.
54. Martj{dotless}n, J., "Diagnóstico de la combustión en motores Diesel de inyección directa" (in spanish), Ed. Revertȳ, 2012, isbn:978-84-291-4717-9.
55. Kouremenos, D., Rakopoulos, C., Hountalas, D., and Zannis, T., "Development of a Detailed Friction Model to Predict Mechanical Losses at Elevated Maximum Combustion Pressures," SAE Technical Paper 2001-01-0333, 2001, doi:10.4271/2001-01-0333.