Additive particle deposition and selective laser processing-a computational manufacturing framework

Computational Mechanics

Volumn 54, Issue 1, 2014, Pages 171-191

  Zohdi, T I ^a  

^a UNIVERSITY OF CALIFORNIA   (United States)

Author keywords

Deposition; Laser; Manufacturing; Particle; Selective laser processing

Indexed keywords

ADDITIVES; DEPOSITION; ELECTROMAGNETIC FIELDS; LASERS; LIQUEFIED GASES; MANUFACTURE; PARTICLES (PARTICULATE MATTER); PHASE TRANSITIONS;

ADDITIVE MANUFACTURING TECHNOLOGY; COMPUTATIONAL FRAMEWORK; COMPUTATIONAL MANUFACTURING; EXTERNAL ELECTROMAGNETIC FIELD; LASER PROCESS; NEAR FIELD INTERACTIONS; PARTICLE CONTACT FORCES; PARTICLE DEPOSITIONS;

HEAT TRANSFER;

EID: 84903315350     PISSN: 01787675     EISSN: None     Source Type: Journal    
DOI: 10.1007/s00466-014-1012-6     Document Type: Article

References (116)

1. Ahmad Z, Rasekh M, Edirisinghe M (2010) Electrohydrodynamic direct writing of biomedical polymers and composites. Macromol Mater Eng 295:315-319
2. Akisanya AR, Cocks ACF, Fleck NA (1997) The yield behavior of metal powders. Int J Mech Sci 39:1315-1324
3. Alivisatos P (2004) The use of nanocrystals in biological detection. Nat Biotechnol 22(1):47-52
4. Allwood J (2005) What is sustainable manufacturing?. Lecture, Cambridge University, Cambridge
5. Anand L, Gu C (2000) Granular materials: constitutive equations and shear localization. J Mech Phys Solids 48:1701-1733
6. Avci B, Wriggers P (2012) A DEM-FEM coupling approach for the direct numerical simulation of 3D particulate flows. J Appl Mech 79:010901-1-7
7. Boyer TH (1988) The force on a magnetic dipole. Am J Phys 56 (8):688-692. Bibcode:1988AmJPh.56.688B. doi: 10.1119/1.15501
8. Brown S, Abou-Chedid G (1994) Yield behavior of metal powder assemblages. J Mech Phys Solids 42:383-398
9. Carbonell JM, Onate E, Suarez B (2010) Modeling of ground excavation with the particle finite element method. J Eng Mech ASCE 136:455-463
10. Choi S, Park I, Hao Z, Holman HY, Pisano AP, Zohdi TI (2010) Ultra-fast self-assembly of micro-scale particles by open channel flow. Langmuir 26(7):4661-4667
11. Choi S, Stassi S, Pisano AP, Zohdi TI (2010) Coffee-ring effect-based three dimensional patterning of micro, nanoparticle assembly with a single droplet. Langmuir 26(14):11690-11698
12. Choi S, Jamshidi A, Seok TJ, Zohdi TI, Wu. MC, Pisano AP (2012) Fast, high-throughput creation of size-tunable micro, nanoparticle clusters via evaporative self-assembly in picoliter-scale droplets of particle suspension. Langmuir 28(6):3102-3111
13. Choi S, Pisano AP, Zohdi TI (2013) An analysis of evaporative self-assembly of micro particles in printed picoliter suspension droplets. J Thin Solid Films 537(30):180-189
14. Cullity BD, Graham CD (2008) Introduction to magnetic Materials, 2 edn. Wiley-IEEE Press, New Jersey, p 103 ISBN 0-471-47741-9
15. Davis SH (2001) Theory of solidification. Cambridge University Press, Cambridge
16. Deckard C (1986) Method and apparatus for producing parts by selective sintering U.S. Patent 4,863,538
17. Demko M, Choi S, Zohdi TI, Pisano AP (2012) High resolution patterning of nanoparticles by evaporative self-assembly enabled by in-situ creation and mechanical lift-off of a polymer template. Appl Phys Lett 99:253102-1-253102-3
18. Demkowicz L. (2006) Computing with hp-adaptive finite elements. I. One- and two- dimensional elliptic and Maxwell problems. Chapman & Hall/CRC, Boca Raton
19. Demkowicz L, Kurtz J, Pardo D, Paszynski M, Rachowicz W, Zdunek A (2007) Computing with Hp-adaptive finite, vol 2. Frontiers: three dimensional elliptic and maxwell problems with applications. CRC Press, Taylor and Francis, Boca Raton
20. Domas F (1997) Eigenschaft profile und Anwendungsü bersicht von EPE und EPP. Technical report of the BASF Company
21. Donev A, Cisse I, Sachs D, Variano EA, Stillinger F, Connelly R, Torquato S, Chaikin P (2004) Improving the density of jammed disordered packings using ellipsoids. Science 303:990-993
22. Donev A, Stillinger FH, Chaikin PM, Torquato S (2004b) Unusually dense crystal ellipsoid packings. Phys Rev Lett 92:255506
23. Donev A, Torquato S, Stillinger F (2005a) Neighbor list collision-driven molecular dynamics simulation for nonspherical hard particles-I Algorithmic details. J Comput Phys 202:737
24. Donev A, Torquato S, Stillinger F (2005b) Neighbor list collision-driven molecular dynamics simulation for nonspherical hard particles-II. Application to ellipses and ellipsoids. J Comput Phys 202:765
25. Donev A, Torquato S, Stillinger FH (2005c) Pair correlation function characteristics of nearly jammed disordered and ordered hard-sphere packings. Phys Rev E 71:011105
26. Dornfeld D, Wright P (2007) Technology wedges for implementing green manufacturing. Trans North Am Manuf Res Inst 35:193-200
27. Duran J (1997) Sands, powders and grains. An introduction to the physics of Granular Matter. Springer, Berlin
28. Elmore WC, Heald MA (1985) Physics of waves. Dover Publishers, New York
29. Farhat C, Lesoinne M, Maman N (1995) Mixed explicit/implicit time integration of coupled aeroelastic problems: three-field formulation, geometric conservation and distributed solution. Int J Numer Methods Fluids 21:807-835
30. Farhat C, Lesoinne M (2000) Two efficient staggered procedures for the serial and parallel solution of three-dimensional nonlinear transient aeroelastic problems. Comput Methods Appl Mech Eng 182:499-516
31. Farhat C, van der Zee G, Geuzaine P (2006) Provably second-order time-accurate loosely-coupled solution algorithms for transient nonlinear computational aeroelasticity. Comput Methods Appl Mech Eng 195:1973-2001
32. Feynman RP, Leighton RB, Sands M (2006) The Feynman lectures on physics vol 2. Addison-Wesley, Reading ISBN 0-8053-9045-6
33. Fleck NA (1995) On the cold compaction of powders. J Mech Phys Solids 43:1409-1431
34. Frenklach M, Carmer CS (1999) Molecular dynamics using combined quantum & empirical forces: application to surface reactions. Adv Class Trajectory Methods 4:27-63
35. Fuller SB, Wilhelm EJ, Jacobson JM (2002) Ink-jet printed nanoparticle microelectromechanical systems. J Microelectromech Syst 11:54-60
36. Gamota D, Brazis P, Kalyanasundaram K, Zhang J (2004) Printed organic and molecular electronics. Kluwer Academic Publishers, New York
37. Gethin DT, Lewis RW, Ransing RS (2003) A discrete deformable element approach for the compaction of powder systems. Modell Simul Mater Sci Eng 11(1):101-114
38. Grigoropoulos CP (2009) Transport in laser microfabrication. Cambridge University Press, Cambridge
39. Gu C, Kim M, Anand L (2001) Constitutive equations for metal powders: application to powder forming processes. Int J Plast 17:147-209
40. Haile JM (1992) Molecular dynamics simulations: elementary methods. Wiley, New York
41. Haruta M (2002) Catalysis of gold nanoparticles deposited on metal oxides. Cattech 6(3):102-115
42. Hase WL (1999) Molecular dynamics of clusters, surfaces, liquids, & interfaces. Advances in classical trajectory methods, vol 4. JAI Press, Stamford
43. Housholder R (1979) Molding process. U.S. Patent 4,247,508
44. Ho C, Steingart D, Salminent J, Sin W, Rantala T, Evans J, Wright P (2006) Dispenser printed electrochemical capacitors for power management of millimeter scale lithium ion polymer microbatteries for wireless sensors. 6th International workshop on micro and nanotechnology for power generation and energy conversion applications (PowerMEMS 2006), Berkeley, CA
45. Huang D, Liao F, Molesa S, Redinger D, Subramanian V (2003) Plastic-compatible low-resistance printable gold nanoparticle conductors for flexible electronics. J Electrochem Soc 150(7):G412-417
46. Hull C (1984) Apparatus for production of three-dimensional objects by stereolithography, U.S. Patent 4,575,330
47. Jackson JD (1998) Classical electrodynamics, 3rd edn. Wiley, New York
48. Johnson K (1985) Contact mechanics. Cambridge University Press, Cambridge
49. Kansaal A, Torquato S, Stillinger F (2002) Diversity of order and densities in jammed hard-particle packings. Phys Rev E 66:041109
50. Ko SH, Park I, Pan H, Grigoropoulos CP, Pisano AP, Luscombe CK, Frechet JMJ (2007) Direct nanoimprinting of metal nanoparticles for nanoscale electronics fabrication. Nano Lett 7:1869-1877
51. Ko SH, Park I, Pan H, Misra N, Rogers MS, Grigoropoulos CP, Pisano AP (2008) ZnO nanowire network transistor fabrication by low temperature, all inorganic nanoparticle solution process. Appl Phys Lett 92:154102
52. Labra C, Onate E (2009) High-density sphere packing for discrete element method simulations. Commun Numer Method Eng 25(7):837-849
53. Lesoinne M, Farhat C (1998) Free staggered algorithm for nonlinear transient aeroelastic problems. AIAA J 36(9):1754-1756
54. Le Tallec P, Mouro J (2001) Fluid structure interaction with large structural displacements. Comput Methods Appl Mech Eng 190(24-25):3039-3067
55. Lewis RW, Gethin DT, Yang XSS, Rowe RC (2005) A combined finite-discrete element method for simulating pharmaceutical powder tableting. Int J Numer Methods Eng 62:853-869
56. Lewis RW, Schrefler BA (1998) The finite element method in the static & dynamic deformation & consolidation of porous media, 2nd edn. Wiley Press, New York
57. Lewis RW, Schrefler BA, Simoni L (1992) Coupling versus uncoupling in soil consolidation. Int J Numer Anal Methods Geomech 15:533-548
58. Maier SA, Atwater HA (2005) Plasmonics: localization and guiding of electromagnetic energy in metal/dielectric structures. J Appl Phys 2005(98):011101
59. Macleod HA (2001) Thin flim optcal filters, 3rd edn. I. O. P, Bristol
60. Martin P (2009) Handbook of deposition technologies for films and coatings, 3rd edn. Elsevier, Boston
61. Michopoulos G, Farhat C, Fish J (2005) Survey on modeling and simulation of multiphysics systems. J Comput Inf Sci Eng 5(3):198-213
62. Martin P (2011) Introduction to surface engineering and functionally engineered materials. Scrivener and Elsevier, Amsterdam
63. Messier R, Giri AP, Roy R (1984) Revised structure zone for thin film physical structure. J Vac Sci Technol A2(2):500
64. Moelwyn-Hughes EA (1961) Physical chemistry. Pergamon Press, Oxford
65. Nakanishi H, Bishop KJM, Kowalczyk B, Nitzan A, Weiss EA, Tretiakov KV, Apodaca MM, Klajn R, Stoddart JF, Grzybowski BA (2009) Photoconductance and inverse photoconductance in thin films of functionalized metal nanoparticles. Nature 460:371-375
66. Niemz MH (2004) Laser tissue interactions-fundamentals and applications. Springer, Berlin
67. Onate E, Idelsohn SR, Celigueta MA, Rossi R (2008) Advances in the particle finite element method for the analysis of fluid-multibody interaction and bed erosion in free surface flows. Comput Methods Appl Mech Eng 197(19-20):1777-1800
68. Onate E, Celigueta MA, Idelsohn SR, Salazar F, Surez B (2011) Possibilities of the particle finite element method for fluid-soil-structure interaction problems. Comput Mech 48:307-318
69. Park J-U, Hardy M, Kang SJ, Barton K, Adair K, Mukhopadhyay DK, Lee CY, Strano MS, Alleyne AG, Georgiadis JG, Ferreira PM, Rogers JA (2007) High-resolution electrohydrodynamic jet printing. Nat Mater 6:782-789
70. Park I, Ko SH, Pan H, Grigoropoulos CP, Pisano AP, Frechet JMJ, Lee ES, Jeong JH (2008) Nanoscale patterning and electronics on flexible substrate by direct nanoimprinting of metallic nanoparticles. Adv Mater 20:489
71. Park KC, Felippa CA (1983) Partitioned analysis of coupled systems. In: Belytschko T, Hughes TJR (eds) Computational methods for transient analysis. Elsevier Science Publishers, North-Holland
72. Piperno S (1997) Explicit/implicit fluid/structure staggered procedures with a structural predictor & fluid subcycling for 2D inviscid aeroelastic simulations. Int J Numer Method Fluids 25:1207-1226
73. Piperno S, Farhat C, Larrouturou B (1995) Partitioned procedures for the transient solution of coupled aeroelastic problems - Part I: model problem, theory, and two-dimensional application. Comput Method Appl Mech Eng 124(1-2):79-112
74. Piperno S, Farhat C (2001) Partitioned procedures for the transient solution of coupled aeroelastic problems - Part II: energy transfer analysis and three-dimensional applications. Comput Methods Appl Mech Eng 190:3147-3170
75. Pö schel T, Schwager T (2004) Computational granular dynamics. Springer, Berlin
76. Ransing RS, Lewis RW, Gethin DT (2004) Using a deformable discrete-element technique to model the compaction behaviour of mixed ductile and brittle particulate systems. Philos Trans R Soc 362(1822):1867-1884
77. Rapaport DC (1995) The art of molecular dynamics simulation. Cambridge University Press, Cambridge
78. Reich-Weiser C, Vijayaraghavan A, Dornfeld DA (2008) Metrics for manufacturing sustainability, Proceedings of IMSEC, ASME, Evanston, IL, Oct 7-10
79. Ridley BA, Nivi B, Jacobson JM (1999) All-inorganic field effect transistors fabricated by printing. Science 286:746-749
80. Rojek J, Labra C, Su O, Onate E (2012) Comparative study of different discrete element models and evaluation of equivalent micromechanical parameters. Int J Solids Struct 49:1497-1517. doi: 10.1016/j.ijsolstr.2012.02.032
81. Rosen M, Dincer I, Kanoglu M (2008) Role of exergy in increasing efficiency and sustainability and reducing environmental impact. Energy Policy 36:128-137
82. Samarasinghe SR, Pastoriza-Santos I, Edirisinghe MJ, Reece MJ, Liz-Marzan LM (2006) Printing gold nanoparticles with an electrohydrodynamic direct write device. Gold Bull 39:48-53
83. Schlick T (2000) Molecular modeling & simulation. An interdisciplinary guide. Springer, New York
84. Sirringhaus H, Kawase T, Friend RH, Shimoda T, Inbasekaran M, Wu W, Woo EP (2000) High-resolution inkjet printing of all-polymer transistor circuits. Science 290:2123-2126
85. Steen WM (1998) Laser material processing. Springer, Berlin
86. Stillinger FH, Weber TA (1985) Computer simulation of local order in condensed phases of silicon. Phys Rev B 31:5262-5271
87. Tatzel H (1996) Grundlagen der Verarbeitungstechnik von EPP-Bewä hrte und neue Verfahren. Technical report of the BASF Company
88. Tersoff J (1988) Empirical interatomic potential for carbon, with applications to amorphous carbon. Phys Rev Lett 61:2879-2882
89. Torquato S (2002) Random heterogeneous materials: microstructure & macroscopic properties. Springer, New York
90. Wang JZ, Zheng ZH, Li HW, Huck WTS, Sirringhaus H (2004) Dewetting of conducting polymer inkjet droplets on patterned surfaces. Nat Mater 3:171-176
91. Wellmann C, Lillie C, Wriggers P (2008) A contact detection algorithm for superellipsoids based on the common-normal concept. Eng Comput 25:432-442
92. Wellmann C, Lillie C, Wriggers P (2008) Homogenization of granular material modelled by a three-dimensional discrete element method. Comput Geotech 35:394-405
93. Wellmann C, Lillie C, Wriggers P (2008) Comparison of the macroscopic behavior of granular materials modeled by different constitutive equations on the microscale. Finite Elem Anal Des 44:259-271
94. Wellmann C, Wriggers P (2011) Homogenization of granular material modeled by a 3D DEM, particle-based methods: fundamentals and applications. In: Onate E, Owen DRJ (eds) pp 211-231
95. Wellmann C, Wriggers P (2012) A two-scale model of granular materials. Comput Method Appl Mech Eng 205-208:46-58
96. Widom B (1966) Random sequential addition of hard spheres to a volume. J Chem Phys 44:3888-3894
97. Wriggers P (2002) Computational contact mechanics. John-Wiley, Chichester
98. Wriggers P (2008) Nonlinear finite element analysis. Springer, Berlin
99. Zienkiewicz OC (1984) Coupled problems & their numerical solution. In: Lewis RW, Bettes P, Hinton E (eds) Numerical methods in coupled systems. Wiley, Chichester, pp 35-58
100. Zienkiewicz OC, Paul DK, Chan AHC (1988) Unconditionally stable staggered solution procedure for soil-pore fluid interaction problems. Int J Numer Methods Eng 26:1039-1055
101. Zohdi TI (2003) On the compaction of cohesive hyperelastic granules at finite strains. Proc Roy Soc 454(2034):1395-1401
102. Zohdi TI (2003b) Genetic optimization of statistically uncertain microheterogeneous solids. Philos Trans R Soc Math Phys Eng Sci 361(1806):1021-1043
103. Zohdi TI (2006) Computation of the coupled thermo-optical scattering properties of random particulate systems. Comput Methods Appl Mech Eng 195:5813-5830
104. Zohdi TI, Kuypers FA (2006) Modeling and rapid simulation of multiple red blood cell light scattering. Proc R Soc Interface 3(11):823-831
105. Zohdi TI (2012) Modeling and simulation of the optical response rod-functionalized reflective surfaces. Comput Mech 50(2):257-268
106. Zohdi TI (2013) Rapid simulation of laser processing of discrete particulate materials. Arch Comput Methods Eng. doi: 10.1007/s11831-013-9092-6. pp 1-17
107. Zohdi TI (2002) An adaptive-recursive staggering strategy for simulating multifield coupled processes in microheterogeneous solids. Int J Numer Methods Eng 53:1511-1532
108. Zohdi TI (2005) Charge-induced clustering in multifield particulate flow. Int J Numer Methods Eng 62(7):870-898
109. Zohdi TI (2007) Computation of strongly coupled multifield interaction in particle-fluid systems. Comput Methods Appl Mech Eng 196:3927-3950
110. Zohdi TI, Wriggers P (2008) Introduction to computational micromechanics. Second Reprinting. Springer, Berlin
111. Zohdi TI (2010) On the dynamics of charged electromagnetic particulate jets. Arch Comput Methods Eng 17(2):109-135
112. Zohdi TI (2010) Simulation of coupled microscale multiphysical-fields in particulate-doped dielectrics with staggered adaptive FDTD. Comput Methods Appl Mech Eng 199:79-101
113. Zohdi TI (2012) Electromagnetic properties of multiphase dielectrics. A primer on modeling, theory and computation. Springer, Berlin
114. Zohdi TI (2012) Dynamics of charged particulate systems. Modeling, theory and computation. Springer, Berlin
115. Zohdi TI (2013) Numerical simulation of charged particulate cluster-droplet impact on electrified surfaces. J Comput Phys 233:509-526
116. Zohdi TI (2014) A direct particle-based computational framework for electrically-enhanced thermo-mechanical sintering of powdered materials. Math Mech Solids. doi: 10.1007/s11831-013-9092-6. pp 1-21