The Effect of Sterilization on Plastics and Elastomers: Third Edition

The Effect of Sterilization on Plastics and Elastomers: Third Edition

Volumn , Issue , 2012, Pages 1-363

  McKeen, Laurence ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84902018809     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/C2011-0-06772-8     Document Type: Book

References (220)

1. Cao Xuesonc, Lu Fenccai Structure/permeability relationships of polyamide-imides. J Appl Polym Sci 1994, 54:1965-1970.
2. Sastri Vinny R. Plastics in medical devices: properties, requirements, and applications 2010, Elsevier Inc, Burlington, MA.
3. Bonifant B.C. Designing with amorphous thermoplastics, medical device & diagnostic industry, trade journal 1988, Cannon Communications, Inc.
4. Ultem PEI resin product guide Eng/6/2003 CA. GE Plastics; 2003.
5. Ultem PEI Resin. GE Plastics; 2003.
6. GE plastics medical applications, supplier marketing literature [NBM-100 (1/89) RTB]. General Electric Company; 1989.
7. Ultem® design guide, supplier design guide [ULT-201 (G 6/90) RBT]. General Electric Company; 1990.
8. Paulino JC, Baccaro LE. Effects of sterilization procedures on physical properties of engineering thermoplastics, supplier technical report, General Electric Company.
9. Stubstad J.A., Hemmerich K.J. Preventing plastic part failure after radiation sterilization. Antec 1994, conference proceedings 1994, Society of Plastics Engineers.
10. Hermanson N.J., Hosman S.L. Hospital sterilants and their effects on thermoplastic materials. Antec 1994, conference proceedings 1994, Society of Plastics Engineers.
11. Ultem® resin: advanced technology for reusable medical devices, supplier marketing literature [ULT-314A (1/91) RTB]. General Electric Company; 1991.
12. Radel Polyarylsulfone... A family of thermoplastic materials engineered for high performance in harsh environments, supplier marketing literature (F-49896). Amoco Performance Products, Inc.
13. Engineering plastics for the medical and health care fields, supplier marketing literature (GF-50022). Amoco Performance Products, Inc.
14. Ultem* resin for healthcare. Sabic Innovative Plastics; 2011.
15. Summary of properties of Kapton® polyimide film, H-38492-2; DuPont™ 2006.
16. Image is in public domain or freely licenses, obtained from, public domain. http://www.wikimedia.org.
17. Ackermann Hans-Wolfgang, Berthiaume Laurent Atlas of virus diagrams 1995, CRC Press.
18. Image from the Centers for Disease Control and Prevention Public Health Image Library, image is in the public domain.
19. http://www.cdc.gov/foodborneburden/2011-foodborne-estimates.html.
20. Nordion The history of food irradiation 2010.
21. I. Atomic, E. Agency, Gamma irradiators for radiation processing, Atomic Energy. (n.d.).
22. Kowalski W. UVGI disinfection. Ultraviolet germicidal irradiation handbook 2009, 17-51.
23. Jeng D.K.H., Kaczmarek K.A., Woodworth A.G. Mechanism of microwave sterilization in the dry state. Applied and Environmental Microbiology 1987, 53:2133-2137.
24. Tang J., Mikhaylenko G., Simunovic J. Microwave sterilization technology 2008.
25. Frazier W.C., Westhoff D.C. Preservation by radiation. Food microbiology 1988, McGraw-Hill, New York, NY, (Chapter 10). 4th ed.
26. Dosimetry for Food Irradiation, Austria, Technical Reports Series No. 409, International Atomic Energy Agency, 2002.
27. Immediate-use steam sterilization 2011.
28. Krishnamurthy K., Khurana H.K., Jun S., Irudayaraj J., Demirci A. Food processing: an overview, comprehensive reviews. Food Science and Food Safety 2008, 7.
29. Mcdonnell G., Russell A.D. Antiseptics and disinfectants: activity, action, and resistance. Clinical Microbiology Reviews 1999, 12:147-179.
30. Rutala W.A., Ph D., Weber D.J. Guideline for disinfection and sterilization in healthcare facilities 2008, 2008.
31. Ophardt Charles Virtual chembook 2003, Elmhurst College.
32. Guzma B. Microcyn TM: a novel super-oxidized water with neutral pH and disinfectant activity. Journal of Hospital Infection 2005, 1-9.
33. Kiernan John A. Formaldehyde, formalin, paraformaldehyde and glutaraldehyde: what they are and what they do. Microscopy Today 2000, 00-1:8-12.
34. Products A.S. Disinfection of flexible endoscopes a single-use disinfectant. Gastroenterology 2011.
35. Rutala W.A., Weber D.J. New disinfection and sterilization methods. Emerging Infectious Diseases 2001, 7:348-353.
36. Feldman L.A., Hui H.K. Compatibility of medical devices and materials with low-temperature hydrogen peroxide gas plasma. Medical Device & Diagnostic Industry 1997, 348-353.
37. Brickner P.W., Vincent R.L., First M., Nardell E., Murray M., Kaufman W. The application of ultraviolet germicidal irradiation to control transmission of airborne disease: bioterrorism countermeasure. Public Health Reports 2003, 118:99-114.
38. http://www.americanairandwater.com/uv-facts/uv-dosage.htm.
39. Hughes J.M., Gerberding J.L. Anthrax bioterrorism: lessons learned and future directions. Emerging Infectious Diseases 2011 Dec, [serial on the Internet], Available from. http://wwwnc.cdc.gov/eid/article/8/10/02-0466.htm.
40. http://www.bt.cdc.gov/agent/agentlist-category.asp.
41. McKeen L.W. The effect of temperature and other factors on plastics 2008, William Andrew. 2nd ed.
42. McKeen L.W. Permeability properties of plastics and elastomers 2011, Elsevier. 3rd ed.
43. http://en.wikipedia.org/wiki/Dendronized_polymers.
44. This is a file from the Wikimedia Commons which is a freely licensed media file repository.
45. Stepto R.F.T. Dispersity in polymer science (IUPAC Recommendations 2009). Pure and Applied Chemistry 2009, 81:351-353.
46. Matsumoto T., Horie S., Ochiumi T. Effect of molecular weight of ethylenes -vinyl alcohol copolymer on membrane properties. Journal of Membrane Science 1981, 9:109-119.
47. Utracki L.A. Polymer blends handbook 2002, vols. 1-2. Springer-Verlag.
48. Utracki L.A. Commercial polymer blends 1998, Springer-Verlag.
49. Utracki L.A. Encyclopaedic dictionary of commercial polymer blends 1994, ChemTec Publishing.
50. Flick E.W. Plastics additives - an industrial guide 1993, William Andrew Publishing/Noyes. 2nd ed.
51. Pritchard G. Plastics additives - an A-Z reference 1998, Springer-Verlag.
52. Alexopoulos P.S., O'Sullivan TC. Mechanical properties of thin films. Annu Rev Mater Sci 1990, 20:391-420.
53. Malacara Daniel Color vision and colorimetry: theory and applications January 15, 2011, Society of Photo Optical. 2nd ed.
54. Broadbent A.D. Colorimetry, methods, Encyclopedia of spectroscopy and spectrometry 2009, Cambridge, UK, p. 372-9.
55. Applications note: Hunter L, a, b color space, insight on color 2008;8(9).
56. Applications note: CIE L*a*b* color space, insight on color 2008;8(7).
57. Radebaugh G.W., Murtha J.L., Julian T.N., Bondi J.N. Methods for evaluating the puncture and shear properties of pharmaceutical polymeric films. Int J Pharm 1988, 45:39-46.
58. Hermanson NJ, Steffens JF. The physical and visual property changes in thermoplastic resins after exposure to high energy sterilization - gamma versus electron beam. ANTEC 1993, conference proceedings. Society of Plastics Engineers; 1993.
59. Sturdevant MF. The long-term effects of ethylene oxide and gamma radiation sterilization on the properties of rigid thermoplastic materials. ANTEC 1990, conference proceedings. Society of Plastics Engineers; 1990.
60. Hermanson NJ. EtO and gamma sterilization - from standard tests to medical devices, 1997.
61. Sturdevant MF. Sterilization compatibility of rigid thermoplastic materials, supplier technical report (301-1548). Dow Chemical Company; 1988.
62. Effects of Electron Beam and Gamma Radiation Sterilization of Thermoplastics, supplier technical report (7126A). Monsanto Company; 1990.
63. Magnum 2620, Magnum 2630, Magnum 642 and Magnum 9020 data sheets, form No. 301-2746-0101X SMG. The Dow Chemical Company; Jan. 2001.
64. Magnum 2600 Series ABS resins, medical grade polymers. Dow Plastics.
65. Cycolac ABS Resin property Guide. GE Plastics; 2006.
66. Haines J, Hauser D. Zylar clear alloys for medical applications, supplier technical report. Novacor Chemicals, Inc.
67. Hermanson, NJ. Effects of alternate carriers of ethylene oxide sterilant on thermoplastics, supplier technical report (301-02018). Dow Chemical Company.
68. Navarrete L, Hermanson N. The changes in ethylene oxide sterilization and their effect on thermoplastics, vol. 1996. Medical Plastics; 2004. pp. 51-64.
69. The effect of electron beam sterilization on transparent polymers used in medical devices, Publication PPM-218. Eastman Chemical Company; 2007.
70. Technical library, general purpose polystyrene resins. The Dow Chemical Company; 1995-2004.
71. Sastri V.R. Plastics in medical devices: properties, requirements, and applications 2010, William Andrew, Norwich NY.
72. Effects of gamma irradiation on the appearance and physical properties of crystal and impact polystyrene (PS301-1008). Ineos Nova; 2009.
73. Product Information Questra 2730, Form No. 301-03470-200 SMG. Dow Plastics; Feb 2000.
74. Hermanson N.J., Wessel T. Syndiotactic polystyrene - a new polymer for high performance medical applications 1998, The Dow Chemical Company, Midland, Michigan.
75. Luran® (SAN) Styrene/Acrylonitrile Copolymer. BASF; 2010.
76. Atakent, A-1, Gamma Radiation Study, supplier technical report. Cyro Industries; 1990.
77. K-resin: a clear choice for medical packaging devices, supplier technical report (55-8801). Phillips 66 Company; 1988.
78. Properties and processing, K-resin. Chevron Phillips Chemical Company, LP; 2002-2003.
79. Medical applications of K-Resin® SBC, Technical Service memorandum #2892. Chevron Phillips Chemical Company LP; 2011.
80. Vectra® liquid crystal polymer (LCP). Ticona; 2000.
81. Linstid H.C., et al. Liquid crystal polymers an overview of technology and typical applications 2000, Summit, NJ: NPE.
82. Ultradur® HR PBT hydrolysis resistant (HR) grades. BASF; 2009.
83. GE Plastics Medical Applications, supplier marketing literature [NBM-100 (1/89) RTB]. General Electric Company; 1989.
84. Hermanson N.J., Hosman S.L. Hospital sterilants and their effects on thermoplastic materials. Antec 1994, conference proceedings 1994, Society of Plastics Engineers.
85. Lexan GR. Resin gamma resistant product information book, supplier marketing literature (NBM-110). General Electric Company; 2006.
86. Cleaning, disinfection and sterilization of parts in Makrolon®, File No. PCS-8019 en. Bayer MaterialScience AG; 2008.
87. Sterilization comparison, supplier marketing literature ACB/3/93. GE Plastics; 1993.
88. Calibre polycarbonate resins. Dow Plastics; 2003.
89. McIlvaine J.E. The effect of gamma sterilization on glass-reinforced and lubricated thermoplastics. Medical Plastics and Biomaterials Magazine Jan. 1977.
90. Fluoropolymer Tubing. Teleflex Medical; 2003.
91. Sturdevant M.F. The long-term effects of ethylene oxide and gamma radiation sterilization on the properties of rigid thermoplastic materials. ANTEC 1990, conference proceedings 1990, Society of Plastics Engineers.
92. The effects of gamma and ethylene oxide sterilization on Styrene Methyl Methacrylate copolymers and a Toughened Terpolymer, medical 91' Ghent, Belgium, conference proceedings. Novacor Chemicals Inc; 1991.
93. Hermanson N.J., Steffens J.F. The physical and visual property changes in thermoplastic resins after exposure to high energy sterilization - gamma versus electron beam. ANTEC 1993, conference proceedings 1993, Society of Plastics Engineers.
94. Gamma irradiation studies on polysulfone and polycarbonate, supplier technical report (project no. 214M0I, file no. 7845-R). Amoco Performance Products, Inc; 1982.
95. Product Information Makrolon Rx-2350, supplier marketing literature [201 (1/89)]. Miles Inc; 1989.
96. Sastri Vinny R. Plastics in medical devices: properties, requirements, and applications 2010, Elsevier Inc.
97. Medical milestones, supplier marketing literature [KU-F-2019(10F)/112/6/92]. Miles, Inc; 1992.
98. The effect of electron beam sterilization on transparent polymers used in medical devices, Publication PPM-218. Eastman Chemical Company; 2007.
99. Haines J, Hauser D. Zylar clear alloys for medical applications, supplier technical report. Novacor Chemicals, Inc.
100. Hermanson NJ. Effects of alternate carriers of ethylene oxide sterilant on thermoplastics, supplier technical report (301 - 02018). Dow Chemical Company.
101. Sturdevant MF. Sterilization compatibility of rigid thermoplastic materials, supplier technical report (301-1548). Dow Chemical Company; 1988.
102. Makrolon polycarbonate for medical device applications, supplier design guide (55-A715(10)J/112-9/87). Miles Inc; 1987.
103. Paulino JC, Baccaro LE. Effects of sterilization procedures on physical properties of Engineering thermoplastics, supplier technical report. General Electric Company.
104. Stubstad J.A., Hemmerich K.J. Preventing plastic part failure after radiation sterilization. Antec 1994, conference proceedings 1994, Society of Plastics Engineers.
105. Navarrete L., Hermanson N. The changes in ethylene oxide sterilization and their effect on thermoplastics 1996, vol. 2000. Medical Plastics, pp. 51-64.
106. Eastman PCT polyester, pellets to fibers. Eastman Chemical; 2000.
107. Eastar™ copolyesters Technical tip TT-74D. Eastman; 2010.
108. Yang H., Moskala E., Jones M. Eastman chemical company, physical performance of copolyesters for medical applications 1998, Vol. 3. Antec.
109. Compatibility of PETG with low-temperature hydrogen peroxide gas plasma sterilization. Pharmaceutical and Medical Packaging News Magazine 2000.
110. Polyethylene naphthalate withstands rigors of sterilization, Emerging Food R&D Report. 1999.
111. Malinoski Jon Radiation sterilization of polycarbonate-polyestercarbonate copolymers 2009, ANTEC.
112. Sastri Vinny R. Plastics in medical devices: properties, requirements, and applications 2010, Elsevier Inc, Burlington, MA.
113. Kubyshkina G., Zupančič B., Štukelj M., Grošelj D., Marion L., Emri I. Sterilization effect on structure, thermal and time-dependent properties of polyamides, mechanics of time-dependent materials and processes in conventional and multifunctional materials 2011, vol. 3. Springer NY.
114. Mitchell J. George, Richard H. Crawford. The effects of dry heat sterilization on parts using selective laser sintering. 21st Annual Solid Freeform Fabrication Symposium, Austin TX, August 2010. pp. 893-907.
115. Vestamid polyamide 12, synopsis of polyamide 12 grades and properties. Degussa Corporation; 2005.
116. McIlvaine JE. The effect of gamma sterilization on glass-reinforced and lubricated thermoplastics, medical plastics and Biomaterials Magazine. Jan. 1977.
117. Hermanson NJ. Effects of alternate carriers of ethylene oxide sterilant on thermoplastics, supplier technical report (301 - 2018). Dow Chemical Company.
118. Design handbook for DuPont engineering plastics - module II, supplier design guide (E-42267). DuPont Engineering Polymers.
119. Ultramid® (PA) product brochure (Europe), KT/K, F 204. BASF; 2010.
120. Sterilization compatibility of Solvay healthcare plastics, technical bulletin. Solvay Advanced polymers, Version 1.2; 2011.
121. Laboratory report-gamma sterilization of Grilamid TR55, supplier technical report, EMS, American Grilon, Inc; 1984.
122. Sturdevant M.F. The long-term effects of ethylene oxide and gamma radiation sterilization on the properties of rigid thermoplastic materials. ANTEC 1990, conference proceedings 1990, Society of Plastics Engineers.
123. Moura E, Ortiz A, Wiebeck H, Paula A, Camargo A, Silva L. Effects Of ionizing radiation on commercial food packaging, controlling of degradation effects in radiation processing of polymers. 2009. pp. 13-39.
124. Engineering properties of Marlex® resins, PE TSM-1. Chevron Phillips Chemical; 2002.
125. DuPont medical packaging technical reference guide, H-97756-1. DuPont; 2009.
126. Navarrete L., Hermanson N. The changes in ethylene oxide sterilization and their effect on thermoplastics. Pops Medical Plastics: Degradation Resistance & Failure Analysis 1996, pp. 51-64.
127. Sastri V.R. Plastics in medical devices: properties, requirements, and applications 2010, William Andrew, Burlington, MA.
128. Product information, Durasul® highly crosslinked polyethylene advanced tribology for total knee and hip arthroplasty that resists wear and aging. Zimmer; 2003.
129. Shang S., Ling M.T.K., Westphal S.P., Woo L. Baxter healthcare radiation sterilization compatibility of medical packaging materials 1997, vol. 3. Antec.
130. From Rexene technology: radiation resistant polypropylenes, supplier technical report (EPP 7037 10/87 4 M JP). Rexene Products Company; 1987.
131. Portnoy R.C. Plastomer modified polypropylene films for medical product packaging. Technical papers of the annual technical conference - Society of Plastics Engineers Incorporated 1997, 2844-2848. Society of Plastics Engineers Inc.
132. Hermanson NJ. Effects of alternate carriers of ethylene oxide sterilant on thermoplastics, supplier technical report (301 - 02018). Dow Chemical Company.
133. Topas® Medical Brochure. 2007.
134. Electron-beam processing of plastics: an alternative to chemical additives. E-BEAM Services Inc; 2011.
135. EVAL™* Ethylene vinyl alcohol copolymer explained. EVAL™ Europe; 2002.
136. Komolprasert V. Packaging for foods treated by ionizing radiation. Packaging for nonthermal processing of food 2007, 87-116. Blackwell Publishing and the Institute of Food Technologists, Ames, IA. J.H. Han (Ed.).
137. Technical bulletin no. 14, effects of radiation on EVAL resins. Eval Europe; 2007.
138. Bruder, Axel, PVC-The material for medical products (translated), Swiss Plastics No. 4, (1999) and Swiss Chem No. 5 (1999).
139. Selecting materials for medical products: from PVC to metallocene polyolefins. Medical Device & Diagnostic Industry; 1996.
140. Brookman R.S. A new PVC based polymer for medical applications. Antec, conference proceedings 1991, Society of Plastics Engineers.
141. Rakus J., Brantly T., Szabo E. Environmental concerns with vinyl medical devices. ANTEC, conference proceedings 1991, Society of Plastics Engineers.
142. Glória Maria Vinhas, Rosa Maria Souto-Maior, Camila Maria Lapa, Yêda Medeiros Bastos de Almeida Degradation studies on plasticized PVC films submited to gamma radiation. Mat Res Oct/Dec 2003, 6(4):497-500. [online], [cited 14 April 2004].
143. BF Goodrich Geon rigid vinyl gamma sterilizable compounds, supplier marketing literature (RX-020). BF Goodrich Company; 1990.
144. Hermanson NJ. Effects of alternate carriers of ethylene oxide sterilant on thermoplastics, supplier technical report (301 - 02018). Dow Chemical Company.
145. Whitaker WA. Acrylic polymers: a clear focus; Jan. 1996.
146. Plexiglas acrylic resin from AtoHaas clearly the best, supplier marketing literature (PL-1700b). AtoHaas; 1993.
147. Atohaas Americas Plexiglas® SG-7 gamma radiation resistant grade acrylic (after sterilization) data sheet. Matweb.com; 2003.
148. Atohaas Americas Plexiglas SG-7 gamma radiation resistant grade acrylic (before sterilization) data sheet. Matweb.com; 2003.
149. Atohaas Americas Plexiglas SG-10 gamma radiation resistant grade acrylic (before sterilization) data sheet. Matweb.com; 2003.
150. Medical grades of santoprene thermoplastic rubber, supplier technical report (TCD00793). Advanced Elastomers Systems; 1993.
151. Plexiglas acrylic molding pellets for medical applications, supplier marketing literature (PL-1519a). Rohm and Haas; 1986.
152. Haines J, Hauser D. Zylar® clear alloys for medical applications, supplier technical report. Novacor Chemicals, Inc.
153. Timm D., Zimmerman D. Sterilizing acrylic with low-temperature hydrogen peroxide gas plasma. Pharmaceutical & Medical Packaging News 2002, Medical Device Link, 2003.
154. Cyro Tech brief: sterilization methods and considerations. CYRO Industries; 2000.
155. ® laminates: flexible solutions for pharma packaging. Drug Development & Delivery May 2003, 3(3).
156. Klöckner pentaplast to display new packaging materials at Pac-Ex '0, ; 2005. http://packagingnetwork.com.
157. ® ionomer films to ionizing radiation. Journal of Plastic Film and Sheeting 1991, 7:221-246.
158. Lyons B.J. Radiation crosslinked ionomers and polyethylenes. Irradiation of polymers; advances in chemistry 1967, 139-155. American Chemical Society, Vienna, Austria.
159. Fluoropolymer tubing. Teleflex Medical; 2003.
160. Sastri Vinny R. Plastics in medical devices: properties, requirements, and applications 2010, Elsevier Inc, Burlington, MA.
161. Ebnesajjad Sina Fluoroplastics. Melt processible fluoroplastics, the definitive user's guide and databook 2003, vol. 2. William Andrew, Inc, Norwich, NY.
162. Milek JT. A survey of materials report for TFE fluoroplastics. Electronic Properties Information Center, EPIC Report No. S-3, 1964.
163. Rosenberg Y., Siegmann A., Narkis M., Shkolnik S. Low dose γ-irradiation on some fluoropolymers: effect of polymer chemical structure. J Appl Poly Sci 1992, 45:783-795.
164. ® PFA fuoropolymer resin, properties handbook May 1997, DuPont Co, publication No. E-96679-4.
165. Hyflon® MFA Design and Processing Guide. Solvay Solexis; 2009.
166. Forsythe John S., Hill David J.T., Logothetis Anestis L., Whittaker Andrew K. The radiation chemistry of the copolymer of tetrafluoroethylene with 2,2-bis(trifluoromethyl)-4,5-difluoro-1,3-dioxole, polymer degradation and stability January 1999, 63(1): 95-101.
167. Lin FMC. Chain microstructure studies of poly(vinyl fluoride) by high resolution NMR spectroscopy. Ph.D. dissertation. University of Akron; 1981.
168. VOLTALEF PCTFE technical brochure. Arkema; 2004.
169. Kel-F 81 PCTFE Engineering Manual. 3M Idustrial Chemical Products Div; 1990.
170. Kynar PVDF (polyvinylidene fluoride). Eldon James Fittings; 2003.
171. Foraflon PVDF, supplier design guide (694.E/07.87/20). Atochem S. A; 1987.
172. Solef® & Hylar® PVDF, polyvinylidene fluoride, design and processing guide, Solvay Solexis; 2006.
173. Kynar® polyvinylidene fluoride, Atofina Corp., King of Prussia, PA: Kynar® and Kynar® Flex, use and applications in the chemical process industry, ATOFINA Corp., King of Prussia, PA; 2001.
174. Halar® ECTFE fluoropolymer, design and processing guide. Solvay Solexis; 2006.
175. Halar® ECTFE fluoropolymer, design guide ECTFE. Ausimont Montedison Group; Thorofare, NJ: Jun. 1997.
176. Stuart Green Effects of gamma sterilization on implant grade Polyetheretherketone 2004, Invibio Biomaterial Solutions, Lancashire UK.
177. Sterilization compatibility of Solvay Healthcare Plastics, technical bulletin. Solvay advanced polymers, Version 1.2; 2011.
178. Mechanical properties of Victrex peek after exposure to steam and hot Condensate, supplier technical report. Victrex: USA.
179. Victrex medical product applications, APPMEDENG/502. Victrex plc; 2003.
180. Vinny R.Sastri Plastics in medical devices: properties, requirements, and applications 2010, Elsevier Inc.
181. Ryton Polyphenylene Sulfide Resins Engineering Properties Guide, supplier design guide [1065(a)-89 A 02]. Phillips 66 Company; 1989.
182. Ryton PPS chemical properties. Chevron Phillips chemical Company, LP; 2001.
183. Gamma Irradiation Studies on polysulfone and polycarbonate, supplier technical report (project no. 214M0I, file no. 7845-R). Amoco performance products, Inc; 1982.
184. Engineering plastics for the medical and health care fields, supplier marketing literature (GF-50022). Amoco performance products, Inc.
185. Bonifant B.C. Designing with amorphous thermoplastics, medical device & diagnostic Industry 1988, Cannon Communications Inc.
186. Radel Polyarylsulfone...A family of thermoplastic materials Engineered for high performance in Harsh environments, supplier marketing literature (F-49896). Amoco performance products, Inc.
187. Ultem* Resin for Healthcare. Sabic Innovative Plastics; 2011.
188. Lonny Wolgemuth Assessing the effects of sterilization methods on parylene coatings, medical device & diagnostic Industry 2002.
189. Delrin® Design Guide-Module III. DuPont; 1997.
190. Chiellini E. Environmentally compatible food packaging. Environmentally compatible food packaging 2008, 371-395. Woodhead Publishing Ltd, Cambridge, UK.
191. Jain J.P., Modi S., Domb A.J., Kumar N. Role of polyanhydrides as localized drug carriers. Journal of Controlled Release: Official Journal of the Controlled Release Society 2005, 103:541-563.
192. Kumar N., Langer R.S., Domb A.J. Polyanhydrides: an overview. Advanced Drug Delivery Reviews 2002, 54:889-910.
193. Kawano Y., Logarezzib A.J.M. X-ray induced degradation of regenerated cellulose membrane films. Polymer Degradation and Stability 1995, 50:125-130.
194. Melski K., Kubera H., Głuszewski W. Effect of ionizing radiation on the properties of PLA packaging materials. Nukleonika 2011, 56:65-69.
195. Sastri V.R. Plastics in medical devices: properties, requirements, and applications 2010, William Andrew.
196. McKeen L.W. The effect of temperature and other factors on plastics, plastics design Library 2008, William Andrew Publishing, Norwich, NY.
197. International standard ISO 18064 thermoplastic elastomers - nomenclature and abbreviated terms. 1st ed. 2003-09-01 (Reference Number ISO 18064:2003(E)).
198. Drobny Jiri George Handbook of thermoplastic elastomers 2007, William Andrew, p. 235-47.
199. PEBAX in medical applications. Arkema; 2007.
200. Drobny Jiri George Handbook of thermoplastic elastomers 2007, William Andrew, p. 249-64.
201. Ecdel elastomers, products and packaging for the medical Industry, Publication PPM-201B 1999, Eastman.
202. Hytrel radiation resistance, supplier technical report (E-68116). DuPont Company; 1984.
203. Ecdel elastomers, products and packaging for the medical Industry 2011, Eastman.
204. Ecdel Elastomers, supplier design guide (MB-100A) 1990, Eastman Plastics.
205. Drobny Jiri George Handbook of thermoplastic elastomers 2007, William Andrew, p. 191-99.
206. Physical properties of various resins. NUNC; 2004.
207. Table 1310: preferred radiation resistant polymers. Engineering Reference.com; 2004.
208. Leading-edge material solutions for tomorrow's medical products. Advanced Elastomer Systems; 2003.
209. Medical grades of santoprene thermoplastic rubber, supplier technical report (TCD00793). Advanced elastomers systems; 1993.
210. Effect of gamma sterilization on Select TPE materials 2010, RTP Company.
211. Santoprene™ thermoplastic vulcanizate, Sterilization Study of Santoprene™ thermoplastic vulcanizate technical Literature - TL00708. ExxonMobil Chemical; 2008.
212. Styrolux® styrene-butadiene copolymer (SBC) thermal properties and Rheology. BASF; 2006.
213. Mediprene® Sterilization Tests. Elasto; 2010.
214. Drobny Jiri George Handbook of thermoplastic elastomers 2007, William Andrew, p 215-34.
215. Sturdevant, M. F, The long-term effects of ethylene oxide and gamma radiation sterilization on the properties of rigid thermoplastic materials. ANTEC 1990, conference proceedings - Society of Plastics Engineers; 1990.
216. Sturdevant, M. F., Sterilization compatibility of rigid thermoplastic materials, supplier technical report (301-1548). Dow Chemical Company; 1988.
217. Hermanson, N. J., Steffens, J. F., The physical and visual property changes in thermoplastic resins after exposure to high energy sterilization - gamma versus electron beam. ANTEC 1993, conference proceedings, Society of plastics Engineers; 1993.
218. Pellethane polyurethane elastomers - 2363 series for medical applications, supplier marketing literature (306-180-79XSMG) 1992, Dow Chemical Company.
219. Hermanson N.J. EtO and gamma sterilization - from standard tests to medical devices 1997.
220. Gautriaud E., Stafford K.T., Adamchuk J., Simon M.W., Ou D.L. Effect of sterilization on the mechanical properties of silicone rubbers. BioProcess Int 2010, 8:42-49.