-
1
-
-
77952306268
-
Separation of model mixtures of epsilon-globin positive fetal nucleated red blood cells and anucleate erythrocytes using a microfluidic device
-
Lee D, Sukumar P, Mahyuddin A, Choolani M, Xua G (2010) Separation of model mixtures of epsilon-globin positive fetal nucleated red blood cells and anucleate erythrocytes using a microfluidic device. J Chromatogr A 1217: 1862-1866.
-
(2010)
J Chromatogr A
, vol.1217
, pp. 1862-1866
-
-
Lee, D.1
Sukumar, P.2
Mahyuddin, A.3
Choolani, M.4
Xua, G.5
-
2
-
-
70849099932
-
Hydrodynamic spinning of hydrogel fibers
-
Hu M, Deng R, Schumacher KM, Kurisawa M, Ye H, Purnamawati K, Ying JY (2010) Hydrodynamic spinning of hydrogel fibers. Biomaterials 31: 863-869.
-
(2010)
Biomaterials
, vol.31
, pp. 863-869
-
-
Hu, M.1
Deng, R.2
Schumacher, K.M.3
Kurisawa, M.4
Ye, H.5
Purnamawati, K.6
Ying, J.Y.7
-
3
-
-
67650046933
-
Compact and low-cost biosensor based on novel approach to spectroscopy of surface plasmons
-
Piliarik M, Vala M, Tichy I, Homola J (2009) Compact and low-cost biosensor based on novel approach to spectroscopy of surface plasmons. Biosens Bioelectron 24: 3430-3435.
-
(2009)
Biosens Bioelectron
, vol.24
, pp. 3430-3435
-
-
Piliarik, M.1
Vala, M.2
Tichy, I.3
Homola, J.4
-
4
-
-
33646035187
-
Rapid prototyping as a tool for diagnosis and treatment planning for maxillary canine impaction
-
Faber J, Berto PM, Quaresma M (2006) Rapid prototyping as a tool for diagnosis and treatment planning for maxillary canine impaction. Am J Orthod Dentofacial Orthop 129(4): 583-589.
-
(2006)
Am J Orthod Dentofacial Orthop
, vol.129
, Issue.4
, pp. 583-589
-
-
Faber, J.1
Berto, P.M.2
Quaresma, M.3
-
5
-
-
31544480667
-
Rapid prototyping: a new method of preparing trays for indirect bonding
-
Ciuffolo F, Epifania E, Duranti G, De Luca V, Raviglia D, Rezza S, Festa F (2006) Rapid prototyping: a new method of preparing trays for indirect bonding. Am J Orthod Dentofacial Orthop 129(4): 75-77.
-
(2006)
Am J Orthod Dentofacial Orthop
, vol.129
, Issue.4
, pp. 75-77
-
-
Ciuffolo, F.1
Epifania, E.2
Duranti, G.3
De Luca, V.4
Raviglia, D.5
Rezza, S.6
Festa, F.7
-
6
-
-
72049129144
-
Mandibular reconstruction using stereolithographic 3-dimensional printing modeling technology
-
Cohen A, Laviv A, Berman P, Nashef R, Abu-Tair J (2009) Mandibular reconstruction using stereolithographic 3-dimensional printing modeling technology. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 108(5): 661-666.
-
(2009)
Oral Surg Oral Med Oral Pathol Oral Radiol Endod
, vol.108
, Issue.5
, pp. 661-666
-
-
Cohen, A.1
Laviv, A.2
Berman, P.3
Nashef, R.4
Abu-Tair, J.5
-
7
-
-
58649092637
-
Use of rapid prototyping in the care of patients with structural heart disease
-
Kim MS, Hansgen AR, Carroll JD (2008) Use of rapid prototyping in the care of patients with structural heart disease. Trends Cardiovasc Med 18(6): 210-216.
-
(2008)
Trends Cardiovasc Med
, vol.18
, Issue.6
, pp. 210-216
-
-
Kim, M.S.1
Hansgen, A.R.2
Carroll, J.D.3
-
8
-
-
29244481147
-
3D polymeric microfluidic device fabrication via contact liquid photolithographic polymerization (CLiPP)
-
Haraldsson KT, Hutchison JB, Sebra RP, Good BT, Anseth KS, Bowman CN (2006) 3D polymeric microfluidic device fabrication via contact liquid photolithographic polymerization (CLiPP). Sensor Actuator B 113: 454-460.
-
(2006)
Sensor Actuator B
, vol.113
, pp. 454-460
-
-
Haraldsson, K.T.1
Hutchison, J.B.2
Sebra, R.P.3
Good, B.T.4
Anseth, K.S.5
Bowman, C.N.6
-
9
-
-
74249121905
-
Print-and-peel fabrication for microfluidics: what's in it for biomedical applications?
-
Thomas MS, Millare B, Clift JM, Bao D, Hong C, Vullev VI (2009) Print-and-peel fabrication for microfluidics: what's in it for biomedical applications? Ann Biomed Eng 38(1): 21-32.
-
(2009)
Ann Biomed Eng
, vol.38
, Issue.1
, pp. 21-32
-
-
Thomas, M.S.1
Millare, B.2
Clift, J.M.3
Bao, D.4
Hong, C.5
Vullev, V.I.6
-
10
-
-
78649331493
-
Maskless writing of microfluidics: Rapid prototyping of 3D microfluidics using scratch on a polymer substrate
-
Do J, Zhang JY, Klapperich CM (2011) Maskless writing of microfluidics: Rapid prototyping of 3D microfluidics using scratch on a polymer substrate. Robot Comput Integr Manuf 27(2): 245-248.
-
(2011)
Robot Comput Integr Manuf
, vol.27
, Issue.2
, pp. 245-248
-
-
Do, J.1
Zhang, J.Y.2
Klapperich, C.M.3
-
11
-
-
0036534546
-
Prototyping of microfluidic devices in poly(dimethylsiloxane) using solid-object printing
-
Cooper McDonald J, Chabinyc ML, Metallo SJ, Anderson JR, Stroock AD, Whitesides GM (2002) Prototyping of microfluidic devices in poly(dimethylsiloxane) using solid-object printing. Anal Chem 74: 1537-1545.
-
(2002)
Anal Chem
, vol.74
, pp. 1537-1545
-
-
Cooper McDonald, J.1
Chabinyc, M.L.2
Metallo, S.J.3
Anderson, J.R.4
Stroock, A.D.5
Whitesides, G.M.6
-
12
-
-
78650628634
-
3D Rapid prototyping technology (RPT) as a powerful tool in microfluidic development
-
Bonyár A, Sántha H, Ring B, Varga M, Kovács JG, Harsányi G (2010) 3D Rapid prototyping technology (RPT) as a powerful tool in microfluidic development. Procedia Engineering 5: 291-294.
-
(2010)
Procedia Engineering
, vol.5
, pp. 291-294
-
-
Bonyár, A.1
Sántha, H.2
Ring, B.3
Varga, M.4
Kovács, J.G.5
Harsányi, G.6
-
13
-
-
44149083324
-
Improved glass-PDMS-glass device technology for accurate measurements of electro-osmotic mobilities
-
Plecis A, Chen Y (2008) Improved glass-PDMS-glass device technology for accurate measurements of electro-osmotic mobilities. Microelectron Eng 85: 1334-1336.
-
(2008)
Microelectron Eng
, vol.85
, pp. 1334-1336
-
-
Plecis, A.1
Chen, Y.2
-
14
-
-
33846196295
-
PDMS bonding by means of a portable, low-cost corona system
-
Haubert K, Drier T, Beebe D (2006) PDMS bonding by means of a portable, low-cost corona system. Lab Chip 6: 1548-1549.
-
(2006)
Lab Chip
, vol.6
, pp. 1548-1549
-
-
Haubert, K.1
Drier, T.2
Beebe, D.3
-
15
-
-
65349120623
-
Rapid prototyping of microfluidic systems using a PDMS/polymer tape composite
-
Kim J, Surapaneni R, Gale BK (2009) Rapid prototyping of microfluidic systems using a PDMS/polymer tape composite. Lab Chip 9: 1290-1293.
-
(2009)
Lab Chip
, vol.9
, pp. 1290-1293
-
-
Kim, J.1
Surapaneni, R.2
Gale, B.K.3
-
16
-
-
33751242782
-
Fabrication of PDMS (polydimethylsiloxane) microlens and diffuser using replica molding
-
Shih T-K, Chen C-F, Ho J-R, Chuang F-T (2006) Fabrication of PDMS (polydimethylsiloxane) microlens and diffuser using replica molding. Microelectron Eng 83: 2499-2503.
-
(2006)
Microelectron Eng
, vol.83
, pp. 2499-2503
-
-
Shih, T.-K.1
Chen, C.-F.2
Ho, J.-R.3
Chuang, F.-T.4
|