Theoretical analysis of melting point depression of pure metals in different initial configurations

Journal of Materials Engineering and Performance

Volumn 23, Issue 5, 2014, Pages 1600-1607

  Kaptay, G ^a,b   Janczak Rusch, J ^c   Pigozzi, G ^c   Jeurgens, L P H ^c  

^a BAY ZOLTÁN NONPROFIT LTD FOR APPLIED RESEARCH   (Hungary)

^b UNIVERSITY OF MISKOLC   (Hungary)

^c SWISS FEDERAL LABORATORIES FOR MATERIALS SCIENCE AND TECHNOLOGY   (Switzerland)

Author keywords

joining; melting point depression; nano

Indexed keywords

JOINING; MELTING POINT;

GENERAL EQUATIONS; HIGH GAS PRESSURES; INITIAL CONFIGURATION; MELTING POINT DEPRESSIONS; NANO; PURE METALS; SOLID METALS; THREE-TERM;

METALS;

EID: 84901005675     PISSN: 10599495     EISSN: 15441024     Source Type: Journal    
DOI: 10.1007/s11665-014-0885-z     Document Type: Conference Paper

References (62)

1. T.T. Bao, Y. Kim, J. Lee, and J.G. Lee, Preparation and Thermal Analysis of Sn-Ag Nano Solders, Mater. Trans., 2010, 51, p 2145-2149
2. C. Zou, Y. Gao, B. Yang, and Q. Zhai, Synthesis and DSC Study on Sn3.5Ag Alloy Nanoparticles Used for Lower Melting Temperature Solder, J. Mater. Sci. Mater. Electron., 2010, 21, p 868-874
3. R. Longtin, E. Hack, J. Neuenschwander, and J. Janczak-Rusch, Benign Joining of Ultrafine Grained Aerospace Aluminum Alloys Using Nanotechnology, Adv. Mater., 2011, 20, p 1-5
4. G. Pigozzi, A. Antusek, J. Janczak-Rusch, M. Parlinska-Wojtan, D. Passerone, C.A. Pignedoli, V. Bissig, J. Patscheider, and L.P.H. Jeurgens, Phase Constitution and Interface Structure of Nano-sized Ag-Cu/AlN Multilayers: Experimental and Ab Initio Modeling, Appl. Phys. Lett., 2012, 101, p 181602
5. P. Pawlow, Über die Abhängigkeit des Schmelzpunktes von der Oberflächenergie eines festen Körpers, Z. Phys. Chem., 1908, 55, p 545-548
6. M. Takagi, Electron-Diffraction Study of Liquid-Solid Transition of Thin Solid Films, J. Phys. Soc. Jpn., 1954, 9(3), p 359-363
7. J.F. Pocza, A. Barna, and P.B. Barna, Formation Processes of Vacuum-Deposited Indium Films and Thermodynamical Properties of Submicroscopic Particles Observed by In Situ Electron Microscopy, J. Vac. Sci. Technol., 1969, 6(4), p 472-475
8. C.J. Coombes, The Melting of Small Particles of Lead and Indium, J. Phys. F, 1972, 2, p 441-449
9. Ph Buffat and J.-P. Borel, Size Effect on the Melting Temperature of Gold Particles, Phys. Rev. A, 1976, 13, p 2287-2296
10. P.R. Couchman and W.A. Jesser, Thermodynamic Theory of Size Dependence of Melting Temperature in Metals, Nature, 1977, 269, p 481-483
11. F. Spaepen and D. Turnbull, Negative Pressures and Melting Point Depression in Oxide-Coated Liquid Metal Droplets, Scripta Metall., 1979, 13, p 149-151
12. G.L. Allen, W.W. Gile, and W.A. Jesser, The Melting Temperature of Microcrystals Embedded in a Matrix, Acta Metall., 1980, 28, p 1695-1701
13. R. Kofman, P. Cheyssac, A. Aouaj, Y. Lereah, G. Deuscher, T. Ben-David, J.M. Penisson, and A. Bourret, Surface Melting Enhanced by Curvature Effects, Surf. Sci., 1994, 303, p 231-246
14. K. Chattopadhyay and R. Goswami, Melting and Superheating of Metals and Alloys, Prog. Mater. Sci., 1997, 42, p 287-300
15. M. Wautelet, On the Shape Dependence of the Melting Temperature of Small Particles, Phys. Lett. A, 1998, 246, p 341-342
16. Z. Zhang, J.C. Li, and Q. Jiang, Modelling for Size-Dependent and Dimension-Dependent Melting of Nanocrystals, J. Phys. D, 2000, 33, p 2653-2656
17. Q. Jiang, Z. Zhang, and J.C. Li, Melting Thermodynamics of Nanocrystals Embedded in a Matrix, Acta Mater., 2000, 48, p 4791-4795
18. T. Tanaka and S. Hara, Thermodynamic Evaluation of Binary Phase Diagrams of Small Particle Systems, Z. Metallkd., 2001, 92, p 467-472
19. M. Hillert and J. Argen, Effect of Surface Free Energy and Surface Stress on Phase Equilibria, Acta Mater., 2002, 50, p 2429-2441
20. U. Tartaglino and E. Tosatti, Strain Effects at Solid Surfaces Near the Melting Point, Surf. Sci., 2003, 532-535, p 623-627
21. Q. Jiang, L.H. Liang, and J.C. Li, Thermodynamic Superheating of Low-Dimensional Metals Embedded in Matrix, Vacuum, 2003, 72, p 249-255
22. Z. Shi, P. Wynblatt, and S.G. Srinivasan, Melting Behavior of Nanosized Lead Particles Embedded in an Aluminium Matrix, Acta Mater., 2004, 52, p 2305-2316
23. V.M. Samsonov and O.A. Malkov, Thermodynamic Model of Crystallization and Melting of Small Particles, Cent. Eur. J. Phys., 2004, 2(1), p 90-103
24. 3 without epitaxial interface, Phys. Rev. B, 2004, 70, p 125421
25. J. Chang and E. Johnson, Surface and Bulk Melting of Small Metal Clusters, Philos. Mag., 2005, 85(30), p 3617-3627
26. J. Slutsker, K. Thornton, A.L. Roytburd, J.A. Warren, and G.B. McFadden, Phase Field Modeling of Solidification Under Stress, Phys. Rev. B, 2006, 74(1), p 014103
27. J.J. Hoyt, Effect of Stress on Melting and Freezing in Nanopores, Phys. Rev. Lett., 2006, 96(4), p 045702
28. G. Guisbiers and M. Wautelet, Size, Shape and Stress Effects on the Melting Temperature of Nano-polyhedral Grains on a Substrate, Nanotechnology, 2006, 17, p 2008-2011
29. J. Sun and S.L. Simon, The Melting Behavior of Aluminum Nanoparticles, Thermochim. Acta, 2007, 463, p 32-40
30. G. Guisbiers, O. Van Overschelde, and M. Wautelet, Nanoparticulate Origin of Intrinsic Residual Stress in Thin Films, Acta Mater., 2007, 55, p 3541-3546
31. O.A. Yeshchenko, I.M. Dmitruk, A.A. Alexeenko, and A.M. Dmytruk, Size-Dependent Melting of Spherical Copper Nanoparticles Embedded in a Silica Matrix, Phys. Rev. B, 2007, 75(8), p 085434
32. P. Letellier, A. Mayaffre, and M. Turmine, Melting Point Depression of Nanosolids: Nonextensive Thermodynamics Approach, Phys. Rev. B, 2007, 76, p 045428
33. Q.S. Mei and K. Lu, Melting and Superheating of Crystalline Solids: From Bulk to Nanocrystals, Prog. Mater. Sci., 2007, 52, p 1175-1262
34. J. Lee, T. Tanaka, J. Lee, and H. Mori, Effect of Substrates on the Melting Temperature of Gold Nanoparticles, Calphad, 2007, 31, p 105-111
35. K.K. Nanda, Size-Dependent Melting of Nanoparticles: Hundred Years of Thermodynamic Model, Pramana J. Phys., 2009, 172, p 617-628
36. V.I. Levitas, M. Pantoya, G. Chauhan, and I.J. Rivero, Effect of the Alumina Shell on the Melting Temperature Depression for Aluminum Nanoparticles, Phys. Chem. C, 2009, 113(32), p 14088-14096
37. G. Kaptay, The Extension of the Phase Rule to Nano-systems and on the Quaternary Point in One-Component Nano Phase Diagrams, J. Nanosci. Nanotechnol., 2010, 10, p 8164-8170
38. W. Luo, L. Deng, K. Su, K. Li, G. Liao, and S. Xiao, Gibbs Free Energy Approach to Calculate the Thermodynamic Properties of Copper Nanocrystals, Phys. B, 2011, 406, p 859-863
39. V.I. Levitas and K. Samani, Size and Mechanics Effects in Surface-Induced Melting of Nanoparticles, Nat. Commun., 2011, 2, p 284
40. V.I. Levitas and K. Samani, Coherent Solid/Liquid Interface with Stress Relaxation in a Phase-Field Approach to the Melting/Solidification Transition, Phys. Rev. B, 2011, 84(14), p 140103
41. G. Garzel, J. Janczak-Rusch, and L. Zabdyr, Reassessment of the Ag-Cu Phase Diagram for Nanosystems Including Particle Size and Shape Effect, Calphad, 2012, 36, p 52-56
42. G. Kaptay, The Gibbs Equation Versus the Kelvin and the Gibbs-Thomson Equations to Describe Nucleation and Equilibrium of Nano-materials, J. Nanosci. Nanotechnol., 2012, 12(3), p 2625-2633
43. A.I. Rusanov, The Development of the Fundamental Concepts of Surface Thermodynamics, Colloid J., 2012, 74(2), p 136-153
44. G. Kaptay, Nano-Calphad: Extension of the Calphad Method to Systems with Nano-phases and Complexions, J. Mater. Sci., 2012, 47, p 8320-8335
45. V.I. Levitas, Z. Ren, Y. Zeng, Z. Zhang, and G. Han, Effect of the Alumina Shell on the Melting Temperature Depression for Aluminum Nanoparticles, Phys. Rev. B, 2012, 85(22), p 220104
46. J. Leitner and M. Kamrádek, Termodynamicky popis nanosystemu, Chem. Listy, 2013, 107, p 606-613
47. J. Lee and K.J. Sim, General Equations of CALPHAD-Type Thermodynamic Description for Metallic Nanoparticle Systems, Calphad, 2013, doi: 10.1016/j.calphad.2013.07.008
48. D.A. Firmansyah, K. Sullivan, K.S. Lee, Y.H. Kim, R. Zahaf, M.R. Zachariah, and D.J. Lee, Microstructural Behavior of the Alumina Shell and Aluminum Core Before and After Melting of Aluminum Nanoparticles, Phys. Chem. C, 2013, 116(1), p 404-411
49. L. Wojtczak, The Melting Point of Thin Films, Phys. Status Solidi, 1967, 22, p K163-K166
50. L.P.H. Jeurgens, Z. Wang, and E.J. Mittemeijer, Thermodynamics of Reactions and Phase Transformations at Interfaces and Surfaces, Int. J. Mater. Res., 2009, 100, p 1281-1307
51. D.G. Gromov and S.A. Gavrilov, Manifestation of the Heterogeneous Mechanism Upon Melting of Low-Dimensional Systems, Phys. Solid State, 2009, 51(10), p 2135-2144
52. R.C. Tolman, The Effect of Droplet Size on Surface Tension, J. Chem. Phys., 1949, 17, p 333-337
53. M.W. Chase (Ed.), Janaf, Thermochemical Tables, 3rd ed., J. Phys. Chem. Data, 1985, 14(Suppl 1)
54. J. Emsley, The Elements, Clarendon Press, Oxford, 1989
55. Y.S. Touloukian, R.K. Kirby, R.E. Taylor, and T.Y.R. Lee, Thermal Expansion, IFI/Plenum, New York, 1977
56. T. Iida and R.I.L. Guthrie, The Physical Properties of Liquid Metals, Clarendon Press, Oxford, 1993
57. G. Kaptay, A Unified Model for the Cohesive Enthalpy, Critical Temperature, Surface Tension and Volume Thermal Expansion Coefficient of Liquid Metals of bcc, fcc and hcp Crystals, Mater. Sci. Eng. A, 2008, 495, p 19-26
58. I. Barin, Thermochemical Properties of Pure Substances, vols 1, 2, VCH, Weinheim, 1993
59. H.M. Ledbetter and E.R. Naimon, Elastic Properties of Metals and Alloys. II. Copper, J. Phys. Chem. Ref. Data, 1974, 3(4), p 897-934
60. D. Gerlich, S.L. Dole, and G.A. Slack, Elastic Properties of Aluminum Nitride, J. Phys. Chem. Solids, 1986, 47(5), p 437-441
61. N. Eustathopoulos, M.G. Nicholas, and B. Drevet, Wettability at High Temperatures, Pergamon, Amsterdam, 1999
62. G. Kaptay, E. Báder, and L. Bolyán, Interfacial Forces and Energies Relevant to Production of Metal Matrix Composites, Mater. Sci. Forum, 2000, 329-330, p 151-156