Theoretical and numerical modeling of shape memory alloys accounting for multiple phase transformations and martensite reorientation

International Journal of Plasticity

Volumn 59, Issue , 2014, Pages 30-54

  Auricchio, F ^a   Bonetti, E ^a   Scalet, G ^b   Ubertini, F ^b  

^a UNIVERSITY OF PAVIA   (Italy)

^b UNIVERSITY OF BOLOGNA   (Italy)

Author keywords

A. Phase transformation; A. Reorientation; B. Shape memory alloys; C. Constitutive modeling; C. Fischer Burmeister function

Indexed keywords

EID: 84900414808     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2014.03.008     Document Type: Article

References (100)

1. J. Arghavani, F. Auricchio, R. Naghdabadi, A. Reali, and S. Sohrabpour A 3D phenomenological constitutive model for shape memory alloys under multiaxial loadings Int. J. Plast. 26 2010 976 991
2. J. Arghavani, F. Auricchio, R. Naghdabadi, and A. Reali On the robustness and efficiency of integration algorithms for a 3D finite strain phenomenological SMA constitutive model Int. J. Numer. Methods Eng. 85 2011 107 134
3. G. Attanasi, F. Auricchio, and M. Urbano Theoretical and experimental investigation on SMA superelastic springs J. Mater. Eng. Perform. 1059-9495 20 4-5 2011 706 711
4. F. Auricchio, and E. Bonetti A new flexible 3D macroscopic model for shape memory alloys Discrete Continuous Dyn. Syst. Ser. S 6 2 2013 277 291
5. F. Auricchio, and L. Petrini A three-dimensional model describing stress-temperature induced solid phase transformations: solution algorithm and boundary value problems Int. J. Numer. Methods Eng. 6 2004 807 836 (Pubitemid 39306444)
6. F. Auricchio, and L. Petrini A three-dimensional model describing stress-temperature induced solid phase transformations: thermomechanical coupling and hybrid composite applications Int. J. Numer. Methods Eng. 61 2004 716 737 (Pubitemid 39259901)
7. F. Auricchio, and U. Stefanelli Numerical Analysis of a three-dimensional super-elastic constitutive model Int. J. Numer. Methods Eng. 61 2004 142 155 (Pubitemid 39115804)
8. F. Auricchio, A. Reali, and U. Stefanelli A three-dimensional model describing stress-induced solid phase transformation with permanent inelasticity Int. J. Plast. 23 2007 207 226 (Pubitemid 44636100)
9. F. Auricchio, A. Coda, A. Reali, and M. Urbano SMA numerical modeling versus experimental results: parameter identification and model prediction capabilities J. Mater. Eng. Perform. 18 2009 649 654
10. Auricchio, F.; Morganti, S.; Reali, A.; 2009. SMA numerical modeling versus experimental results. In: Proceedings of European Symposium on Martensitic Transformations (ESOMAT 2009), pp. 1-6.
11. F. Auricchio, M. Conti, S. Morganti, and A. Reali Shape memory alloy: from constitutive modeling to finite element analysis of stent deployment CMES 57 3 2010 225 243
12. F. Auricchio, A. Reali, and A. Tardugno Shape-memory alloys: effective 3D modelling, computational aspects and design of devices Int. J. Comput. Mater. Sci. Surf. Eng. 3 2010 199 223
13. M. Azaouzi, N. Lebaal, A. Makradi, and S. Belouettar Optimization based simulation of self-expanding Nitinol stent Mater. Des. 50 2013 917 928
14. T. Bartel, and K. Hackl A micromechanical model for martensitic transformations in shape-memory alloys based on energy relaxation ZAMM 89 2009 792 809
15. T. Bartel, and K. Hackl Multiscale modeling of martensitic phase transformations: on the numerical determination of heterogeneous mesostructures within shape-memory alloys induced by precipitates Techn. Mech. 30 2010 324 342
16. T. Bartel, A. Menzel, and B. Svendsen Thermodynamic and relaxation-based modeling of the interaction between martensitic phase transformations and plasticity J. Mech. Phys. Solids 59 2011 1004 1019
17. A. Bekker, and L. Brinson Temperature-induced phase transformation in a shape memory alloy: phase diagram based kinetics approach J. Mech. Phys. Solids 45 6 1997 949 988 (Pubitemid 127403328)
18. C. Bouvet, S. Calloch, and C. Lexcellent Mechanical behavior of a Cu-Al-Be shape memory alloy under multiaxial proportional and nonproportional loadings J. Eng. Mater. Technol ASME 124 2002 112 124 (Pubitemid 40000933)
19. C. Bouvet, S. Calloch, and C. Lexcellent A phenomenological model for pseudoelasticity of shape memory alloys under multiaxial proportional and nonproportional loadings Eur. J. Mech. A-Solid 23 2004 37 61
20. L. Brinson One-dimensional constitutive behavior of shape memory alloys: thermomechanical derivation with non-constant material functions and redefined martensite internal variables J. Intell. Mater. Syst. Struct. 4 1993 229 242 (Pubitemid 23640066)
21. Y. Chemisky, A. Duval, E. Patoor, and T. Ben Zineb Constitutive model for shape memory alloys including phase transformation, martensitic reorientation and twins accommodation Mech. Mater. 43 2011 361 376
22. Y. Chemisky, G. Chatzigeorgiou, P. Kumar, and D. Lagoudas A constitutive model for cyclic actuation of high-temperature shape memory alloys Mech. Mater. 68 2014 120 136
23. R. de Aguiar, M. Savi, and P. Pacheco Experimental and numerical investigations of shape memory alloy helical springs Smart Mater. Struct. 19 2010 1 9
24. R. de Aguiar, W. de Castro Leo Neto, M. Savi, and P. Calas Lopes Pacheco Shape memory alloy helical springs performance: modeling and experimental analysis Mater. Sci. Forum 758 2013 147 156
25. J. Dennis, and R. Schnabel Numerical Methods for Unconstrained Optimization and Nonlinear Equations 1983 Prentice-Hall Englewood Cliffs, New York
26. T. Duerig, K. Melton, D. Stoekel, and C. Wayman Engineering Aspects of Shape Memory Alloys 1990 Butterworth-Heinemann London
27. G. Dumont, and C. Kuhl Finite element simulation for design optimization of shape memory alloy spring actuators Eng. Comput. 22 2005 835 848 (Pubitemid 41455705)
28. A. Fischer A special Newton-type optimization method Optimization 24 1992 269 284
29. M. Frémond Non-Smooth Thermomechanics 2002 Springer-Verlag Berlin
30. X. Gao, R. Qiao, and L. Brinson Phase diagram kinetics for shape memory alloys: a robust finite element implementation Smart Mater. Struct. 16 2007 2102 2115 (Pubitemid 350175538)
31. C. Grabe, and O. Bruhns Path dependence and multiaxial behavior of a polycrystalline NiTi alloy within the pseudoelastic and pseudoplastic temperature regimes Int. J. Plast. 25 2009 513 545
32. M. Gurtin, E. Fried, and L. Anand The Mechanics and Thermodynamics of Continua vol. 158 2010 Cambridge University Press
33. D. Hartl, and D. Lagoudas Constitutive modeling and structural analysis considering simultaneous phase transformation and plastic yield in shape memory alloys Smart Mater. Struct. 18 2009 1 17
34. D. Hartl, G. Chatzigeorgiou, and D. Lagoudas Three-dimensional modeling and numerical analysis of rate-dependent irrecoverable deformation in shape memory alloys Int. J. Plast. 26 2010 1485 1507
35. D. Helm Numerical simulation of martensitic phase transitions in shape memory alloys using an improved integration algorithm Int. J. Numer. Methods Eng. 69 2007 1997 2035 (Pubitemid 46380531)
36. D. Helm, and P. Haupt Shape memory behaviour: modelling within continuum thermomechanics Int. J. Solids Struct. 40 4 2003 827 849 (Pubitemid 36211448)
37. Huang, W.; 1998. Shape memory alloys and their application to actuators for deployable structures (Ph.D. thesis), University of Cambridge.
38. C. Kanzow Some noninterior continuation methods for linear complementarity problems SIAM J. Matrix Anal. Appl. 17 1996 851 868
39. A. Khandelwal, and V. Buravalla Models for shape memory alloy behavior: an overview of modeling approaches Int. J. Struct. Changes Solids 1 2009 111 148
40. B. Kiefer, T. Bartel, and A. Menzel Implementation of numerical integration schemes for the simulation of magnetic SMA constitutive response Smart Mater. Struct. 21 2012 1 8
41. Korelc, J.; 2007. AceFEM/AceGen Manual 2007. .
42. D. Lagoudas, and S. Shu Residual deformations of active structures with SMA actuators Int. J. Mech. Sci. 41 1999 595 619
43. D. Lagoudas, Z. Bo, and M. Qidwai A unified thermodynamic constitutive model for SMA and finite element analysis of active metal matrix composites Mech. Compos. Mater. Struct. 3 2 1996 153 179
44. D. Lagoudas, P. Entchev, P. Popov, E. Patoor, L. Brinson, and X. Gao Shape memory alloys, Part II: modeling of polycrystals Mech. Mater. 38 2006 430 462 (Pubitemid 43226017)
45. D.C. Lagoudas, D. Hartl, Y. Chemisky, L. Machado, and P. Popov Constitutive model for the numerical analysis of phase transformation in polycrystalline shape memory alloys Int. J. Plast. 32-33 2012 155 183
46. S. Leclercq, and C. Lexcellent A general macroscopic description of the thermomechanical behavior of shape memory alloys J. Mech. Phys. Solids 44 1996 953 980 (Pubitemid 126359636)
47. C. Lexcellent, S. Leclercq, B. Gabry, and G. Bourbon The two way shape memory effect of shape memory alloys: an experimental study and a phenomenological model Int. J. Plasticity 16 2000 1155 1168
48. C. Lexcellent, M. Boubakar, C. Bouvet, and S. Calloch About modelling the shape memory alloy behaviour based on the phase transformation surface identification under proportional loading and anisothermal conditions Int. J. Solids Struct. 48 2006 613 626 (Pubitemid 41705843)
49. C. Liang, and C. Rogers Design of shape memory alloy actuators J. Mech. Des. 114 1992 223
50. T. Lim, and D. McDowell Mechanical behavior of an Ni-Ti shape memory alloy under axial-torsional proportional and nonproportional loading J. Eng. Mater. Technol. ASME 121 1999 9 18
51. J. Lubliner Plasticity Theory 1990 MacMillan New York
52. P. Luig, and O. Bruhns On the modeling of shape memory alloys using tensorial internal variables Mat. Sci. Eng. A-Struct. 481-482 2008 379 383 (Pubitemid 351494442)
53. C. Morin, Z. Moumni, and W. Zaki A constitutive model for shape memory alloys accounting for thermomechanical coupling Int. J. Plast. 27 2011 748 767
54. C. Morin, Z. Moumni, and W. Zaki Thermomechanical coupling in shape memory alloys under cyclic loadings: experimental analysis and constitutive modeling Int. J. Plast. 27 12 2011 1959 1980
55. Z. Moumni, W. Zaki, and Q. Nguyen Theoretical and numerical modeling of solid-solid phase change: application to the description of the thermomechanical behavior of shape memory alloys Int. J. Plast. 24 2008 614 645
56. J. Nocedal, and S. Wright Numerical Optimization 1999 Springer
57. K. Otsuka, and X. Ren Physical metallurgy of Ti-Ni-based shape memory alloys Prog. Mater. Sci. 50 2005 511 678 (Pubitemid 40259062)
58. K. Otsuka, and C. Wayman Shape Memory Materials 1998 Cambridge University Press Cambridge
59. M. Panico, and L. Brinson A three-dimensional phenomenological model for martensite reorientation in shape memory alloys J. Mech. Phys. Solids 55 11 2007 2491 2511 (Pubitemid 47562464)
60. V. Panoskaltsis, S. Bahuguna, and D. Soldatos On the thermomechanical modeling of shape memory alloys Int. J. Nonlinear Mech. 0020-7462 39 5 2004 709 722
61. V. Panoskaltsis, D. Soldatos, and S. Triantafyllou Generalized plasticity theory for phase transformations Procedia Eng. 1877-7058 10 2011 3104 3108 (11th International Conference on the Mechanical Behavior of Materials (ICM11))
62. V. Panoskaltsis, D. Soldatos, and S. Triantafyllou A new model for shape memory alloy materials under general states of deformation and temperature conditions A. Boudouvis, G. Stavroulakis, Proceedings of the 7th GRACM International Congress on Computational Mechanics 2011 ISSN 1877-7058
63. E. Patoor, D. Lagoudas, P. Entchev, L. Brinson, and X. Gao Shape memory alloys, Part I: general properties and modeling of single crystals Mech. Mater. 38 2006 391 429 (Pubitemid 43230079)
64. M. Peigney, and J. Seguin An incremental variational approach to coupled thermo-mechanical problems in anelastic solids. Application to shape-memory alloys Int. J. Solids Struct. 50 24 2013 4043 4054
65. M. Peigney, J. Seguin, and E. Herve-Luanco Numerical simulation of shape memory alloys structures using interior-point methods Int. J. Solids Struct. 48 2011 2791 2799
66. X. Peng, B. Chen, X. Chen, J. Wang, and H. Wang A constitutive model for transformation, reorientation and plastic deformation of shape memory alloys Acta Mech. Solida Sin. 25 3 2012 285 298
67. B. Peultier, T. Ben Zineb, and E. Patoor Macroscopic constitutive law for SMA: application to structure analysis by FEM Mech. Mater. 38 2006 510 524
68. B. Peultier, T. Ben Zineb, and E. Patoor A simplified micromechanical constitutive law adapted to the design of shape memory applications by finite element methods Mat. Sci. Eng. A-Struct. 481-482 2008 384 388 (Pubitemid 351509223)
69. Pilch, J.; Heller, L.; Sittner, P.; 2009. .
70. P. Popov, and D. Lagoudas A 3D constitutive model for shape memory alloys incorporating pseudoelasticity and detwinning of self-accommodated martensite Int. J. Plast. 23 2007 1679 1720 (Pubitemid 47214659)
71. M. Qidwai, and D. Lagoudas On thermomechanics and transformation surfaces of polycrystalline NiTi shape memory alloy material Int. J. Plast. 16 2000 1309 1343
72. A. Quarteroni, R. Sacco, and F. Saleri Numerical Mathematics 2007 Springer
73. B. Raniecki, C. Lexcellent, and K. Tanaka Thermodynamic models of pseudoelastic behaviour of shape memory alloys Arch. Mech. 44 1992 261 284
74. R. Rockafellar Convex Analysis 1970 Princeton University Press Princeton
75. L. Saint-Sulpice, S. Arbab Chirani, and S. Calloch A 3D super-elastic model for shape memory alloys taking into account progressive strain under cyclic loadings Mech. Mater. 41 2009 12 26
76. A. Saleeb, S. Padula, and A. Kumar A multi-axial, multimechanism based constitutive model for the comprehensive representation of the evolutionary response of SMAs under general thermomechanical loading conditions Int. J. Plast. 5 2011 655 687
77. A. Saleeb, B. Dhakal, S. Padula II, and D. Gaydosh Calibration of a three-dimensional multimechanism shape memory alloy material model for the prediction of the cyclic attraction character in binary NiTi alloys J. Intell. Mater. Syst. Struct. 4 2013 70 88
78. A. Saleeb, B. Dhakal, M. Hosseini, and S. Padula II Large scale simulation of NiTi helical spring actuators under repeated thermomechanical cycles Smart Mater. Struct. 22 2013 1 20
79. M. Savi, and A. Braga Chaotic vibrations of an oscillator with shape memory J. Braz. Soc. Mech. Sci. Eng. 15 1993 1 20
80. M. Schmidt-Baldassari Numerical concepts for rate-independent single crystal plasticity Comput. Methods Appl. Mech. Eng. 192 2003 1261 1280 (Pubitemid 36333621)
81. P. Sedlák, M. Frost, B. Benešová, T. Ben Zineb, and P. Šittner Thermomechanical model for NiTi-based shape memory alloys including R-phase and material anisotropy under multi-axial loadings Int. J. Plast. 39 2012 132 151
82. J. Shaw, and S. Kyriakides Thermomechanical aspects of NiTi J. Mech. Phys. Solids 43 8 1995 1243 1281
83. P. Sittner, Y. Hara, and M. Tokuda Experimental study on the thermoelastic martensitic transformation in shape memory alloy polycrystal induced by combined external forces Metall. Mater. Trans. A 26 1995 2923 2935
84. P. Sittner, L. Heller, J. Pilch, P. Sedlak, M. Frost, Y. Chemisky, A. Duval, B. Piotrowski, T. Ben Zineb, E. Patoor, F. Auricchio, S. Morganti, A. Reali, G. Rio, D. Favier, Y. Liu, E. Gibeau, C. Lexcellent, L. Boubakar, D. Hartl, S. Oehler, D. Lagoudas, and J. Van Humbeeck Roundrobin SMA modeling P. Sittner, L. Heller, V. Paidar, The 8th European Symposium on Martensitic Transformations (ESOMAT 2009), EDP Sciences 2009 08001
85. A. Souza, E. Mamiya, and N. Zouain Three-dimensional model for solids undergoing stress-induced phase transformations Eur. J. Mech. A-Solid 17 1998 789 806 (Pubitemid 128402331)
86. G. Stachowiak, and P. McCormick Two stage yielding in a NiTi alloy Scripta Metall. Mater. 21 1987 403 406 (Pubitemid 17532536)
87. G. Stachowiak, and P. McCormick Shape memory behaviour associated with the R and martensitic transformations in a NiTi alloy Mater. Trans. JIM 36 2 1988 291 297 (Pubitemid 18560755)
88. S. Stupkiewicz, and H. Petryk A robust model of pseudoelasticity in shape memory alloys Int. J. Numer. Methods Eng. 93 7 2012 747 769
89. Q. Sun, and Z. Li Phase transformation in superelastic NiTi polycrystalline micro-tubes under tension and torsion - from localization to homogeneous deformation Int. J. Solids Struct. 39 2002 3797 3809 (Pubitemid 34805681)
90. P. Thamburaja, and L. Anand Polycrystalline shape-memory materials: effect of crystallographic texture J. Mech. Phys. Solids 49 2001 709 737 (Pubitemid 33710938)
91. Y. Toi, J. Lee, and M. Taya Finite element analysis of superelastic, large deformation behavior of shape memory alloy helical springs Comput. Struct. 82 2004 1685 1693
92. M. Wagner, and W. Windl Lattice stability, elastic constants and macroscopic moduli of NiTi martensites from first principles Acta Mater. 56 2008 6232 6245
93. E. Williams, and M. Elahina An automotive SMA mirror actuator: modeling, and experimental evaluation J. Intell. Mater. Syst. Struct. 19 2008 1425 1434
94. Wolfram, Mathematica Documentation, 2013. .
95. W. Wu, M. Qi, X. Liu, D. Yang, and W. Wang Delivery and release of nitinol stent in carotid artery and their interactions: a finite element analysis J. Biomech. 40 2007 3034 3040 (Pubitemid 47385815)
96. W. Zaki An efficient implementation for a model of martensite reorientation in martensitic shape memory alloys under multiaxial nonproportional loading Int. J. Plast. 37 2012 72 94
97. W. Zaki Time integration of a model for martensite detwinning and reorientation under nonproportional loading using Lagrange multipliers Int. J. Solids Struct. 49 21 2012 2951 2961
98. W. Zaki, and Z. Moumni A three-dimensional model of the thermomechanical behavior of shape memory alloys J. Mech. Phys. Solids 55 11 2007 2455 2490 (Pubitemid 47562466)
99. W. Zaki, and Z. Moumni A 3D model of the cyclic thermomechanical behavior of shape memory alloys J. Mech. Phys. Solids 55 11 2007 2427 2454 (Pubitemid 47562467)
100. W. Zaki, S. Zamfir, and Z. Moumni An extension of the ZM model for shape memory alloys accounting for plastic deformation Mech. Mater. 42 2010 266 274