A three-dimensional model of the thermomechanical behavior of shape memory alloys

Journal of the Mechanics and Physics of Solids

Volumn 55, Issue 11, 2007, Pages 2455-2490

  Zaki, Wael ^a   Moumni, Ziad ^a  

^a ENSTA PARISTECH   (France)

Author keywords

Finite elements; Generalized standard materials; Macro scale modeling; Thermomechanical SMA behavior; Three dimensional structure analysis

Indexed keywords

CONSTRAINT THEORY; FINITE ELEMENT METHOD; MARTENSITE; MATHEMATICAL MODELS; THERMOMECHANICAL TREATMENT;

GENERALIZED STANDARD MATERIALS; MACRO-SCALE MODELING; THERMOMECHANICAL LOADING; THERMOMECHANICAL SMA BEHAVIOR; THREE-DIMENSIONAL STRUCTURE ANALYSIS;

SHAPE MEMORY EFFECT;

EID: 35248815614     PISSN: 00225096     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jmps.2007.03.012     Document Type: Article

References (72)

1. Abeyaratne R., and Kim S. Cyclic effects in shape-memory alloys: a one-dimensional continuum model. Int. J. Solids Struct. 34 (1997) 3273-3289
2. Abeyaratne R., and Knowles J. A continuum model of a thermoelastic solid capable of undergoing phase transitions. J. Mech. Phys. Solids 41 (1993) 541-571
3. Abeyaratne R., Kim S., and Knowles J. A one-dimensional continuum model for shape-memory alloys. Int. J. Solids Struct. 31 (1994) 2229-2249
4. Ahluwalia R., Lookman T., Saxena A., and Albers R. Landau theory for shape memory polycrystals. Acta Mater. 52 (2004) 209-218
5. Auricchio, F., 1995. Shape-memory alloys: applications, micromechanics, macromodelling and numerical simulations. Ph.D. Thesis, University of California at Berkeley.
6. Auricchio F., and Sacco E. Thermo-mechanical modelling of a superelastic shape-memory wire under cyclic stretching-bending loadings. Int. J. Solids Struct. 38 (2001) 6123-6145
7. Auricchio F., Marfia S., and Sacco E. Modelling of SMA materials: training and two way memory effect. Comput. Struct. 81 (2003) 2301-2317
8. Baêta-Neves A., Savi M., and Pacheco P. On the Fremond's constitutive model for shape memory alloys. Mech. Res. Commun. 31 (2004) 677-688
9. Ball J., and James R. Fine phase mixtures as minimizers of energy. Arch. Ration. Mech. Anal. 100 (1987) 13-52
10. Barsch G., and Krumhansl J. Twin boundaries in ferroelastic media without interface dislocations. Phys. Rev. Lett. 53 (1984) 1069-1072
11. Bekker A., and Brinson L. Temperature-induced phase transformation in a shape memory alloy: phase diagram based kinetics approach. J. Mech. Phys. Solids 45 6 (1997) 949-988
12. Bekker A., and Brinson L. Phase diagram based description of the hysteresis behavior of shape memory alloys. Acta Materialia 46 (1998) 3649-3665
13. Berveiller, M., Patoor, E., 1993. Comportement thermomécanique des matériaux usuels et des alliages à mémoire de forme. In: Technologie des Alliages à Mémoire de Forme. HERMES, pp. 43-62 (Chapter 2).
14. Bo Z., and Lagoudas D. Thermomechanical modeling of polycrystalline SMAs under cyclic loading, part I: theoretical derivations. Int. J. Eng. Sci. 37 (1999) 1089-1140
15. Bo Z., and Lagoudas D. Thermomechanical modeling of polycrystalline SMAs under cyclic loading, part III: evolution of plastic strains and two-way shape memory effect. Int. J. Eng. Sci. 37 (1999) 1175-1203
16. Bonetti E. Global solution to a Frémond model for shape memory alloys with thermal memory. Nonlinear Anal. 46 (2001) 535-565
17. Boubakar M., Myne S., Lexcellent C., and Boisse P. Analyse et prédiction 3D du comportement de structures en alliages à mémoire de forme à grandes déformations pseudoélastiques. Rev. Eur. Elém. Finis 7 8 (1998) 91-110
18. Bouvet C., Calloch S., and Lexcellent C. A phenomenological model for pseudoelasticity of shape memory alloys under multiaxial proportional and nonproportional loadings. Eur. J. Mech. A/Solids 23 (2004) 37-61
19. Bowles J., and Mackenzie J. The crystallography of martensitic transformations. Acta Metall. 2 (1954) 129-147
20. Brinson L., and Huang M. Simplifications and comparisons of shape memory alloy constitutive models. J. Intelligent Mater. Syst. Struct. 7 (1996) 108-114
21. Brocca M., Brinson L., and Bažant Z. Three-dimensional constitutive model for shape memory alloys based on microplane model. J. Mech. Phys. Solids 50 (2002) 1051-1077
22. Colli P. Global existence for the three-dimensional Frémond model of shape memory alloys. Nonlinear Anal. Theory Methods Appl. 24 (1995) 1565-1579
23. Falk F. Model free energy, mechanics, and thermodynamics of shape memory alloys. Acta Metall. 28 (1980) 1773-1780
24. Frémond, M., 1987. Matériaux à mémoire de forme. C. R. Acad. Sci. Paris, tome 34, s.II, n.7, pp. 239-244.
25. Frémond M. L'éducation des alliages à mémoire de forme. Rev. Eur. Elém. Finis 7 8 (1998) 35-46
26. Frémond M. Non Smooth Thermomechanics (2001), Springer, Berlin
27. Gao X., and Brinson L. A simplified multivariant SMA model based on invariant plane nature of martensitic transformation. J. Intelligent Mater. Syst. Struct. 13 (2002) 795-810
28. Gao X., Huang M., and Brinson L. A multivariant micromechanical model for SMAs part 1. Crystallographic issues for single crystal model. Int. J. Plasticity 16 (2000) 1345-1369
29. Halphen B., and Nguyen Q. Plastic and visco-plastic materials with generalized potential. Mech. Res. Commun. 1 (1974) 43-47
30. Huang M., Gao X., and Brinson L. A multivariant micromechanical model for SMAs part 2. Polycrystal model. Int. J. Plasticity 16 (2000) 1371-1390
31. Ivshin Y., and Pence T. A thermomechanical model for a one variant shape memory material. J. Intelligent Mater. Syst. Struct. 5 (1994) 455-473
32. Koistinen D., and Marburger R. A general equation prescribing the extent of the austenite-martensite transformation in pure iron-carbon alloys and plain carbon steels. Acta Metall. 7 (1959) 59-60
33. Lagoudas D., and Bo Z. Thermomechanical modeling of polycrystalline SMAs under cyclic loading, part II: material characterization and experimental results for a stable transformation cycle. Int. J. Eng. Sci. 37 (1999) 1141-1173
34. Lagoudas D., and Bo Z. Thermomechanical modeling of polycrystalline SMAs under cyclic loading, part IV: modeling of minor hysteresis loops. Int. J. Eng. Sci. 37 (1999) 1205-1249
35. Lagoudas D., and Entchev P. Modeling of transformation-induced plasticity and its effects on the behavior of porous shape memory alloys. Part I: constitutive model for fully dense SMAs. Mech. Mater. 36 (2004) 865-892
36. Lagoudas, D., Entchev, P., Popov, P., Patoor, E., Brinson, L., Gao, X., 2006. Shape memory alloys, part II: modeling of polycrystals. Mech. Mater. 38, 430-462.
37. Lagoudas D., and Shu S. Residual deformation of active structures with SMA actuators. Int. J. Mech. Sci. 41 (1999) 595-619
38. Laurençot P., Schimperna G., and Stefanelli U. Global existence of a strong solution to the one-dimensional full model for irreversible phase transitions. J. Math. Anal. Appl. 271 (2002) 426-442
39. Leclerq S., and Lexcellent C. A general macroscopic description of the thermomechanical behavior of shape memory alloys. J. Mech. Phys. Solids 44 6 (1996) 953-980
40. Lexcellent C., and Bourbon G. Thermodynamical model of cyclic behaviour of Ti-Ni and Cu-Zn-Al shape memory alloys under isothermal undulated tensile tests. Mech. Mater. 24 (1996) 59-73
41. Lexcellent C., Boubakar M., Bouvet C., and Calloch S. About modelling the shape memory alloy behaviour based on the phase transformation surface identification under proportional and anisothermal conditions. Int. J. Solids Struct. 43 (2006) 613-626
42. Lexcellent C., Leclerq S., Gabry B., and Bourbon G. The two way shape memory effect of shape memory alloys: an experimental study and a phenomenological model. Int. J. Plasticity 16 (2000) 1155-1168
43. Li Z., and Sun Q. The initiation and growth of macroscopic martensite band in nano-grained NiTi microtube under tension. Int. J. Plasticity 18 (2002) 1481-1498
44. Liang C., and Rogers C. One-dimensional thermomechanical constitutive relations for shape memory materials. J. Intelligent Mater. Syst. Struct. 1 (1990) 207-234
45. Moumni, Z., 1995. Sur la modélisation du changement de phase à l'état solide. Ph.D. Thesis, École Nationale Supérieure des Ponts et Chaussées.
46. Müller I., and Seelecke S. Thermodynamic aspects of shape memory alloys. Math. Comput. Modelling 34 (2001) 1307-1355
47. Orgéas L., Favier D., and Rio G. Déformation superélastique non homogène d'une éprouvette de traction NiTi. Expérience et modélisation numérique. Rev. Eur. Elém. Finis 7 8 (1998) 111-136
48. Pagano S., and Alart P. Solid-solid phase transition modelling: relaxation procedures, configurational energies and thermomechanical behaviours. Int. J. Eng. Sci. 37 (1999) 1821-1840
49. Paiva A., Savi M., Barbosa Braga A., and Pacheco P. A constitutive model for shape memory alloys considering tensile-compressive asymmetry and plasticity. Int. J. Solids Struct. 42 (2005) 3439-3457
50. Patoor, E., Berveiller, M., 1993. Lois de comportement et calcul de structures en alliage à mémoire de forme. In: Technologie des Alliages à Mémoire de Forme. HERMES, pp. 195-224 (Chapter 9).
51. Patoor E., Eberhardt A., and Berveiller M. Thermomechanical behavior of shape memory alloys. Arch. Mech. 40 (1988) 775-794
52. Raniecki B., and Lexcellent C. Thermodynamics of isotropic pseudoelasticity in shape memory alloys. Eur. J. Mech. A/Solids 17 (1998) 185-205
53. Raniecki B., Lexcellent C., and Tanaka K. Thermodynamic models of pseudoelastic behaviour of shape memory alloys. Arch. Mech. 44 (1992) 261-284
54. Raniecki B., Rejzner J., and Lexcellent C. Anatomization of hysteresis loops in pure bending of ideal pseudoelastic SMA beams. Int. J. Mech. Sci. 43 (2001) 1339-1368
55. Savi M., Paiva A., Baêta-Neves A., and Pacheco P. Phenomenological modeling and numerical simulation of shape memory alloys: a thermo-plastic-phase transformation coupled model. J. Intelligent Mater. Syst. Struct. 3 (2002) 261-273
56. Saxena A., Bishop A., Shenoy S., and Lookman T. Computer simulation of martensitic textures. Comput. Mater. Sci. 10 (1998) 16-21
57. Shaw J. A thermomechanical model for a 1-D shape memory alloy wire with propagating instabilities. Int. J. Solids Struct. 39 (2002) 1275-1305
58. Shaw J., and Kyriakides S. Thermomechanical aspects of NiTi. J. Mech. Phys. Solids 43 8 (1995) 1243-1281
59. Shaw J., and Kyriakides S. On the nucleation and propagation of phase transformation fronts in a NiTi alloy. Acta Mater. 45 2 (1997) 683-700
60. Shimperna G., and Stefanelli U. Positivity of the temperature for phase transitions with micro-movements. Nonlinear Anal. Real World Appl. 8 (2007) 257-266
61. Shirakawa K., and Stefanelli U. Structure result for steady-state solutions of a one-dimensional Frémond model of SMA. Physica D 190 (2004) 190-212
62. Silling S. Dynamic growth of martensitic plates in an elastic material. J. Elasticity 28 (1992) 143-164
63. Sun Q., and Li Z. Phase transformation in superelastic NiTi polycrystalline micro-tubes under tension and torsion-from localization to homogeneous deformation. Int. J. Solids Struct. 39 (2002) 3797-3809
64. Sun Q., Zhang X., and Xu T. Some recent advances in experimental study of shape memory alloys. Proceedings of IUTAM Symposium on Micro- and Macrostructural Aspects of Thermoplasticity (1997), Bochum, Germany 407-416
65. Sun Q., Zhang X., and Xu T. On the deformation of A-M interfaces in single crystal shape memory alloys and some related issues. J. Eng. Mater. Technol. 121 (1999) 38-43
66. Tan G., Liu Y., Sittner P., and Saunders M. Lüder-like deformation associated with stress-induced martensitic transformation in NiTi. Scr. Materialia 50 (2004) 193-198
67. Tanaka T. A thermomechanical sketch of shape memory effect: one-dimensional tensile behavior. Res Mech. 18 (1986) 251-263
68. Tanaka K., and Nagaki S. A thermomechanical description of materials with internal variables in the process of phase transitions. Arch. Appl. Mech. 51 (1982) 287-299
69. Tanaka K., Nishimura F., Hayashi T., Tobushi H., and Lexcellent C. Phenomenological analysis on subloops and cyclic behavior in shape memory alloys under mechanical and/or thermal loads. Mech. Mater. 19 (1995) 281-292
70. Tanaka K., Ohnami D., Watanabe T., and Kosegawa J. Micromechanical simulations of thermomechanical behavior in shape memory alloys: transformation conditions and thermomechanical hysteresis. Mech. Mater. 34 (2002) 279-298
71. Wechsler M., Lieberman D., and Read T. On the theory of the formation of martensite. Trans. Metall. Soc. AIME 197 (1953) 1503-1515
72. Zhang X., Sun Q., and Yu S. A non-invariant plane model for the interface in CuAlNi single crystal shape memory alloys. J. Mech. Phys. Solids 48 (2000) 2163-2182