Realistic Cold Expansion Finite Element Model and Experimental Validations for Aluminium Alloys

Experimental Mechanics

Volumn 54, Issue 5, 2014, Pages 841-855

  Lapalme, Maxime ^a   Hoseini, Majid ^b   Bocher, Philippe ^b   Colle, Alain R ^c   Lévesque, Martin ^a  

^a ÉCOLE POLYTECHNIQUE DE MONTRÉAL   (Canada)

^b ÉCOLE DE TECHNOLOGIE SUPÉRIEURE   (Canada)

^c Bell Helicopter Textron Canada Limited   (Canada)

Author keywords

Cold expansion; Digital image correlation; Finite element analysis; Plasticity; Residual strain; Residual stress; X ray diffraction

Indexed keywords

FINITE ELEMENT METHOD; IMAGE ANALYSIS; PLASTICITY; RESIDUAL STRESSES; STRAIN MEASUREMENT; X RAY DIFFRACTION;

COLD-EXPANSION; COMPLEMENTARY TECHNIQUES; D. DIGITAL IMAGE CORRELATION (DIC); DIGITAL IMAGE CORRELATIONS; EXPERIMENTAL VALIDATIONS; OUT-OF-PLANE DISPLACEMENT; RESIDUAL STRAINS; STRESSES MEASUREMENTS;

ALUMINUM ALLOYS;

EID: 84900296588     PISSN: 00144851     EISSN: 17412765     Source Type: Journal    
DOI: 10.1007/s11340-013-9844-0     Document Type: Article

References (35)

1. Phillips J (1974) Sleeve Coldworking of Fastener Holes (trans: Division MT). Vol. I. Air Force Materials Laboratory.
2. Burlat M, Julien D, Lévesque M, Bui-Quoc T, Bernard M (2008) Effect of local cold working on the fatigue life of 7475-T7351 aluminium alloy hole specimens. Eng Fract Mech 75(8): 2042-2061.
3. Restis J, Reid L (2002) FTI Process Specification 8101D: Cold Expansion of Holes Using the Standard Split Sleeve System and Countersink Cold Expansion. FTI-8101D. Fatigue Technology Inc, Seatle.
4. Skorupa A, Skorupa M (2012) Riveted Lap Joints in Aircraft Fuselage: Design, Analysis and Properties, vol 189. Springer.
5. Hsu YC, Forman RG (1975) Elastic-plastic analysis of an infinite sheet having a circular hole under pressure. J Appl Mech 42(2): 347-352.
6. Rich D, Impellizzeri L (1977) Fatigue analysis of cold-worked and interference fit fastener holes. ASTM Spec Tech Publ 637: 153-175.
7. Ball D (1995) Elastic-plastic stress analysis of cold expanded fasterner holes. Fatigue Fract Eng Mater Struct 18(1): 47-63.
8. Poussard C, Pavier M, Smith D (1995) Analytical and finite element predictions of residual stresses in cold worked fastener holes. J Strain Anal Eng Des 30(4): 291-304.
9. De Matos P, Moreira P, Camanho P, De Castro P (2005) Numerical simulation of cold working of rivet holes. Finite Elem Anal Des 41(9): 989-1007.
10. Kang J, Johnson WS, Clark DA (2002) Three-dimensional finite element analysis of the cold expansion of fastener holes in two aluminum alloys. J Eng Mater Technol 124(2): 140-145.
11. Yongshou L, Xiaojun S, Jun L, Zhufeng Y (2010) Finite element method and experimental investigation on the residual stress fields and fatigue performance of cold expansion hole. Mater Des 31(3): 1208-1215.
12. Chakherlou T, Vogwell J (2003) The effect of cold expansion on improving the fatigue life of fastener holes. Eng Fail Anal 10(1): 13-24.
13. Ismonov S, Daniewicz S, Newman J Jr, Hill M, Urban M (2009) Three dimensional finite element analysis of a split-sleeve cold expansion process. J Eng Mater Technol 131: 031007.
14. Maximov J, Duncheva G, Ganev N, Bakalova T (2009) The benefit from an adequate finite element simulation of the cold hole expansion process. Eng Fail Anal 16(1): 503-511.
15. Houghton S, Campbell S (2011) Identifying the residual stress field developed by hole cold expansion using finite element analysis. Fatigue Fract Eng Mater Struct 35(1): 74-83.
16. Nigrelli V, Pasta S (2008) Finite-element simulation of residual stress induced by split-sleeve cold-expansion process of holes. J Mater Process Technol 205(1): 290-296.
17. Farhangdoost K, Hosseini A (2011) The effect of mandrel speed upon the residual stress distribution around cold expanded hole. Procedia Eng 10: 2178-2183.
18. Papanikos P, Meguid S (1998) Three-dimensional finite element analysis of cold expansion of adjacent holes. Int J Mech Sci 40(10): 1019-1028.
19. Mahendra Babu N, Jagadish T, Ramachandra K, Sridhara S (2008) A simplified 3-D finite element simulation of cold expansion of a circular hole to capture through thickness variation of residual stresses. Eng Fail Anal 15(4): 339-348.
20. Priest M, Poussard C, Pavier M, Smith D (1995) An assessment of residual-stress measurements around cold-worked holes. Exp Mech 35(4): 361-366.
21. El-Magd E, Treppmann C, Korthäuer M (2005) Experimentelle und Numerische Untersuchung zum Thermomechanischen Stoffverhalten. Hochgeschwindigkeitsspanen Metallischer Werkstoffe: 183-206.
22. Özdemir A, Edwards L (2008) Relaxation of residual stresses at cold-worked fastener holes due to fatigue loading. Fatigue Fract Eng Mater Struct 20(10): 1443-1451.
23. Webster G, Ezeilo A (2001) Residual stress distributions and their influence on fatigue lifetimes. Int J Fatigue 23: 375-383.
24. Ozdemir AT, Edwards L (2004) Through-thickness residual stress distribution after the cold expansion of fastener holes and its effect on fracturing. J Eng Mater Technol 126(1): 129-135.
25. Ball D, Lowry D (1998) Experimental Investigation on the effects of cold expansion of fastener holes. Fatigue Fract of Eng Mater Struct 21(1): 17-34.
26. Backman D (2010) An Experimental and Theoretical Analysis of Cold Working and Riveting in Fibre Metal Laminate Materials. vol 1. National Research Council Canada.
27. Backman D, Liao M, Crichlow L, Yanishevsky M, Patterson EA (2008) The use of digital image correlation in a parametric study on the effect of edge distance and thickness on residual strains after hole cold expansion. J Strain Anal Eng Des 43(8): 781-789. doi: 10. 1243/03093247jsa448.
28. Backman D, Patterson EA (2008) Measuring Residual Strains in Aluminum and Fiber Metal Laminate Materials During Cold Expansion and Riveting. In: Society for Experimental Mechanics-11th International Congress and Exhibition on Experimental and Applied Mechanics. pp 217-223.
29. Cirello A, Pasta S (2010) Displacement measurement through digital image correlation and digital speckle pattern interferometry techniques in cold-expanded holes. Strain 46(6): 581-588. doi: 10. 1111/j. 1475-1305. 2008. 00469. x.
30. Metallic Materials Properties Development and Standardization (MMPDS-06) (2011). Battelle Memorial Institute.
31. Handbook A (1992) Friction, lubrication and wear technology. Am Soc Metals 18: 942.
32. ANSYS (2010) ANSYS Mechanical APDL Command Reference. vol Release 13. 0. ANSYS Inc., 275 Technology Drive. Canonsburg.
33. Prevey PS (1986) X-Ray Diffraction Residual Stress Techniques. ASM International. ASM Handbook 10: 380-392.
34. Sutton M, Yan J, Tiwari V, Schreier H, Orteu J (2008) The effect of out-of-plane motion on 2D and 3D digital image correlation measurements. Opt Lasers Eng 46(10): 746-757.
35. VAMAS (2007) Draft VAMAS TWA26 Pre-Standard Calibration and Assessment of Optical Strain Measurements Systems. Part II: Standardised Test Materials for Optical Methods of Strain Measurement Systems. University of Sheffield.