Influence on Pore Structure of Micro/Nanofibrillar Cellulose in Pigmented Coating Formulations

Transport in Porous Media

Volumn 103, Issue 2, 2014, Pages 155-179

  Dimic Misic, Katarina ^a   Ridgway, Cathy ^b   Maloney, Thaddeus ^a   Paltakari, Jouni ^a   Gane, Patrick ^a,b  

^a AALTO UNIVERSITY   (Finland)

^b OMYA INTERNATIONAL AG   (Switzerland)

Author keywords

Coating porosity; Controlled release; Imbibition in porous structures; MFC; NFC; Water oil absorption

Indexed keywords

CELLULOSE; CELLULOSE NANOCRYSTALS; COATINGS; HYDROCARBONS; LIQUIDS; NANOCELLULOSE; PARAFFINS; PORE STRUCTURE; POROSITY; SWELLING;

CARBOXY-METHYL CELLULOSE; CHEMICAL TREATMENTS; COATING FORMULATIONS; COATING POROSITY; CONTROLLED RELEASE; ENVIRONMENTAL FACTORS; MICROFIBRILLATED CELLULOSE; POROUS STRUCTURES;

WATER ABSORPTION;

ABSORPTION; ALKANE; CELLULOSE; COATING; ENVIRONMENTAL FACTOR; GEL; IMBIBITION; MEMBRANE; OIL; PERMEABILITY; WATER RETENTION;

EID: 84899940237     PISSN: 01693913     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11242-014-0293-8     Document Type: Article

References (57)

1. Agoda-Tandjawa, G., Durand, S., Berot, S., Blassel, C., Gaillard, C., Garnier, C., Doublier, J.: Rheological characterization of microfibrillated cellulose suspensions after freezing. Carbohydr. Polym. 80, 677-686 (2010).
2. Agoda-Tandjawa, G., Durand, S., Gaillard, C., Garnier, C., Doublier, J.-L.: Rheological behaviour and microstructure of microfibrillated cellulose suspensions/low-methoxyl pectin mixed systems. Effect of calcium ions. Carbohydr. Polym. 87, 1045-1057 (2012).
3. Ahola, S., Myllytie, P., Österberg, M., Teerinen, T., Laine, J.: Effect of polymer adsorption on cellulose nanofibril water binding capacity and aggregation. BioResources 3, 1315-1328 (2008).
4. Aulin, C., Ahola, S., Josefsson, P., Nishino, T., Hirose, Y., Österberg, M., Wågberg, L.: Nanoscale cellulose films with different crystallinities and mesostructures-their surface properties and interaction with water. Langmuir 25, 7675-7685 (2009).
5. Brunauer, S., Emmett, P. H., Teller, E.: Adsorption of gases in multimolecular layers. J. Am. Chem. Soc. 60, 309-319 (1938).
6. Buchhammer, H., Petzold, G., Lunkwitz, K.: Salt effect on formation and properties of interpolyelectrolyte complexes and their interactions with silica particles. Langmuir 15, 4306-4310 (1999).
7. 3 suspensions in the presence of polyethylene oxide and kraft lignin. Colloids Surf. A Physicochem. Eng. Asp. 141, 153-160 (1998).
8. Chen, W., Yu, H., Liu, Y., Hai, Y., Zhang, M., Chen, P.: Isolation and characterization of cellulose nanofibers from four plant cellulose fibers using a chemical-ultrasonic process. Cellulose 18, 433-442 (2011).
9. Decesari, S., Facchini, M., Matta, E., Mircea, M., Fuzzi, S., Chughtai, A., Smith, D.: Water soluble organic compounds formed by oxidation of soot. Atmos. Environ. 36, 1827-1832 (2002).
10. Dimic-Misic, K., Puisto, A., Paltakari, J., Alava, M., Maloney, T.: The influence of shear on the dewatering of high consistency nanofibrillated cellulose furnishes. Cellulose 20, 1853-1864 (2013a).
11. Dimic-Misic, K., Puisto, A., Gane, P. A. C., Nieminen, K., Alava, M., Paltakari, J., Maloney, T.: The role of MFC/NFC swelling in the rheological behaviour and dewatering of high consistency furnishes. Cellulose 20, 2847-2861 (2013b).
12. Dimic-Misic, K., Gane, P. A. C., Paltakari, J.: Micro- and nanofibrillated cellulose as rheology modifier additive in CMC-containing pigment coating formulations. Ind. Eng. Chem. Res. 52, 16066-16083 (2013c).
13. Felix, J. M., Gatenholm, P.: The nature of adhesion in composites of modified cellulose fibers and polypropylene. J. Appl. Polym. Sci. 42, 609-620 (1991).
14. Ferrer, A., Quintana, E., Filpponen, I., Solala, I., Vidal, T., Rodríguez, A., Laine, J., Rojas, O. J.: Effect of residual lignin and heteropolysaccharides in nanofibrillar cellulose and nanopaper from wood fibers. Cellulose 19, 2179-2193 (2012).
15. Gane, P. A. C., Ridgway, C. J., Barcelo, E.: Analysis of pore structure enables improved tablet delivery systems. Powder Technol. 169, 77-83 (2006).
16. Gane, P. A. C., Kettle, J. P., Matthews, G. P., Ridgway, C. J.: Void space structure of compressible polymer spheres and consolidated calcium carbonate paper-coating formulations. Ind. Eng. Chem. Res. 35, 1753-1764 (1996).
17. Gane, P. A. C., Salo, M., Kettle, J. P., Ridgway, C. J.: Comparison of Young-Laplace pore size and microscopic void area distributions in topologically similar structures: a new method for characterising connectivity in pigmented coatings. J. Mater. Sci. 44, 422-432 (2009).
18. Gane, P. A. C., Ridgway, C. J., Lehtinen, E., Valiullin, R., Furo, I., Schoelkopf, J., Paulapuro, H., Daicic, J.: Comparison of NMR cryoporometry, mercury intrusion porosimetry, and DSC thermoporosimetry in characterizing pore size distributions of compressed finely ground calcium carbonate structures. Ind. Eng. Chem. Res. 43, 7920-7927 (2004).
19. Gerstner, P., Paltakari, J., Gane, P. A. C.: A method for the measurement of thermal contact diffusivity of paper coating structures. Nordic Pulp Pap. J. 23, 354-362 (2008).
20. Ghanem, A., Higuchi, W., Simonelli, A.: Interfacial barriers in interphase transport II: influence of additives upon the transport of diethylphthalate across the hexadecane-gelatin-water interface. J. Pharm. Sci. 59, 232-237 (1970).
21. Gisler, T., Ball, R. C., Weitz, D. A.: Strain hardening of fractal colloidal gels. Phys. Rev. Lett. 82, 1064 (1999).
22. González, I., Boufi, S., Pèlach, M. A., Alcalà, M., Vilaseca, F., Mutjé, P.: Nanofibrillated cellulose as paper additive in eucalyptus pulps. BioResources 7, 5167-5180 (2012).
23. Husband, J.: Adsorption and rheological studies of sodium carboxymethyl cellulose onto kaolin: effect of degree of substitution. Colloids Surf. Physicochem. Eng. Asp. 134, 349-358 (1998).
24. Iwamoto, S., Abe, K., Yano, H.: The effect of hemicelluloses on wood pulp nanofibrillation and nanofiber network characteristics. Biomacromolecules 9, 1022-1026 (2008).
25. Jäder, J., Järnström, L.: The influence of thickener addition on filter cake formation durning dewatering of mineral suspentions. Appl. Rheol. 13, 125-131 (2003).
26. Kieweg, S. L., Katz, D. F.: Squeezing flows of vaginal gel formulations relevant to microbicide drug delivery. J. Biomech. Eng. 128, 540-553 (2006).
27. Klemm, D., Schumann, D., Kramer, F., Heßler, N., Koth, D., Sultanova, B.: Nanocellulose materials-different cellulose, different functionality. Macromol. Symp. 280, 60-71 (2009).
28. Laudone, G., Matthews, G., Gane, P.: Modelling diffusion from simulated porous structures. Chem. Eng. Sci. 63, 1987-1996 (2008).
29. Luu, W. T., Bousfield, D. W., Kettle, J.: Application of Nano-fibrillated Cellulose as a Paper Surface Treatment for Inkjet Printing, vol. 2, pp. 1152-1163. PaperCon 2011, Covington (2011).
30. McGenity, P., Gane, P. A. C., Husband, J., Engley, M.: Effects of interactions between coating color components and rheology. Water Retent. Run. 1992, 133 (1992).
31. Mihranyan, A., Ferraz, N., Strømme, M.: Current status and future prospects of nanotechnology in cosmetics. Prog. Mater. Sci. 57, 875-910 (2012).
32. Morin, P., Beccard, B., Caude, M., Rosset, R.: Influence of temperature on FTIR spectra of various organic compounds analyzed by on-line carbon dioxide SFC/FTIR. J. High Resolut. Chromatogr. 11, 697-705 (1988).
33. Pääkko, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O., Lindström, T.: Enzymatic hydrolysis combined with mechanical shearing and high-pressure homogenization for nanoscale cellulose fibrils and strong gels. Biomacromolecules 8, 1934-1941 (2007).
34. Petersson, L., Oksman, K.: Biopolymer based nanocomposites: comparing layered silicates and microcrystalline cellulose as nanoreinforcement. Compos. Sci. Technol. 66, 2187-2196 (2006).
35. Richmond, F., Co, A., Bousfield, D.: The coating of nanofibrillated cellulose onto paper using flooded and metered size press methods. Proc. Technical Association of Pulp and Paper, Tappi PaperCon 2012, 12PaperCon/Papers/12PAP18 aspx. (2012).
36. Ridgway, C. J., Gane, P. A. C.: Constructing NFC-pigment composite surface treatment for enhanced paper stiffness and surface properties. Cellulose 19, 547-560 (2012).
37. Ridgway, C. J., Schoelkopf, J., Gane, P. A. C.: Competitive absorption of polar and non-polar liquids into latex bound porous structures of fine ground calcium carbonate. Transp. Porous Media 86, 945-964 (2011a).
38. Ridgway, C. J., Schoelkopf, J., Gane, P. A. C.: Response to isopropanol or ionic/non-ionic surfactant in the competitive imbibition of water and alkane into calcium carbonate structures. Nord. Pulp Pap. J. 26, 151-159 (2011b).
39. Ridgway, C. J., Gane, P. A. C., Schoelkopf, J.: Achieving rapid absorption and extensive liquid uptake capacity in porous structures by decoupling capillarity and permeability: nanoporous modified calcium carbonate. Transp. Porous Media 63, 239-259 (2006).
40. Ridgway, C. J., Gane, P. A. C.: Bulk density measurement and coating porosity calculation for coated paper samples. Nord. Pulp Pap. J. 18, 24-31 (2003).
41. Ridgway, C. J., Schoelkopf, J., Gane, P. A. C.: A new method for measuring the liquids permeability of coated and uncoated papers and boards. Nord. Pulp Pap. J. 18, 377-381 (2003).
42. Ridgway, C. J., Gane, P. A. C., Schoelkopf, J.: Modified calcium carbonate coatings with rapid absorption and extensive liquid uptake capacity. Colloids Surf. 236, 91-103 (2004).
43. Ridgway, C. J., Gane, P. A. C.: Size-selective absorption into pigmented coating structures: suspension starch polymer vs. nanofibrillar cellulose. Cellulose 20, 933-951 (2013).
44. Ridgway, C. J., Weihs, J., Grossmann, O., Hunziker, P., Gane, P. A. C.: Designing nanotechnology coatings for replacement of fibrous white top liner. Nord. Pulp Pap. J. 28, 560-572 (2013).
45. Saito, T., Nishiyama, Y., Putaux, J., Vignon, M., Isogai, A.: Homogeneous suspensions of individualized microfibrils from TEMPO-catalyzed oxidation of native cellulose. Biomacromolecules 7, 1687-1691 (2006).
46. Saito, T., Isogai, A.: TEMPO-mediated oxidation of native cellulose. Appita Annu. Conf. 3, 337-340 (2005).
47. Sandås, S., Salminen, P. J., Eklund, D.: Measuring the water retention of coating colors. Tappi J. 72, 207-210 (1989).
48. Schoelkopf, J., Ridgway, C. J., Gane, P. A. C., Matthews, G. P., Spielmann, D. C.: Measurement and network modeling of liquid permeation into compacted mineral blocks. J. Colloid Interface Sci. 227, 119-131 (2000).
49. Siqueira, G., Bras, J., Dufresne, A.: Cellulose whiskers versus microfibrils: influence of the nature of the nanoparticle and its surface functionalization on the thermal and mechanical properties of nanocomposites. Biomacromolecules 10, 425-432 (2008).
50. Siró, I., Plackett, D.: Microfibrillated cellulose and new nanocomposite materials: a review. Cellulose 17, 459-494 (2010).
51. Subramanian, R., Hiltunen, E., Gane, P. A. C.: Potential use of micro-and nanofibrillated cellulose composites exemplified by paper. In: Cellulose Fibers: Bio-and Nano-polymer Composites, pp. 121-150 (2011).
52. Sutandar, P., Ahn, D. J., Franses, E. I.: FTIR ATR analysis for microstructure and water uptake in poly(methyl methacrylate) spin cast and Langmuir-Blodgett thin films. Macromolecules 27, 7316-7328 (1994).
53. Syverud, K., Chinga-Carrasco, G., Toledo, J., Toledo, P. G.: A comparative study of Eucalyptus and Pinus radiata pulp fibres as raw materials for production of cellulose nanofibrils. Carbohydr. Polym. 84, 1033-1038 (2011).
54. Taipale, T., Österberg, M., Nykänen, A., Ruokolainen, J., Laine, J.: Effect of microfibrillated cellulose and fines on the drainage of kraft pulp suspension and paper strength. Cellulose 17, 1005-1020 (2010).
55. Turbak, A. F., Snyder, F. W., Sandberg, K. R.: Microfibrillated cellulose, a new cellulose product: properties, uses, and commercial potential. J. Appl. Polym. Sci. 37, 815-827 (1983).
56. Yang, H., Yan, R., Chen, H., Lee, D. H., Zheng, C.: Characteristics of hemicellulose, cellulose and lignin pyrolysis. Fuel 86, 1781-1788 (2007).
57. Zimmermann, T., Bordeanu, N., Strub, E.: Properties of nanofibrillated cellulose from different raw materials and its reinforcement potential. Carbohydr. Polym. 79, 1086-1093 (2010).